nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.04.2008

Studies on Production and Thermo-Mechanical Treatment of 0.32% Nitrogen Alloyed Duplex Stainless Steel

verfasst von: P. Chandramohan, S.S. Mohamed Nazirudeen, S.S. Ramakrishnan

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 2/2008

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Duplex stainless steel with nitrogen content 0.32% was produced using a conventional induction furnace under normal ambient atmosphere. The samples were subsequently hot forged to various size reductions (23-57%). Both the as-cast and the hot-forged samples were examined for changes in the microstructure and mechanical properties. The results reveal that the optimal-mechanical properties were noticed for a forging deformation of 48%. Texture analysis was carried out in these samples using Inverse Pole Figures (IPF) and Orientation Distribution Function (ODF). However, IPF and ODF results revealed that bulk texture was weak after hot forging.

Vorheriger Artikel Corrosion Inhibition of Zn-Al-Cu Alloy by 2-Aminothiazole

Nächster Artikel Evaluation of Silicone Rubber Insulators used in High-Voltage Transmission Lines

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

J.R. Davis, ASM Specialty Handbook-Stainless Steels, ASM International, Materials Park, OH, 1996, ISBN: 0-87170-503-6

D.Y. Kobayashi, S. Wolynec, Evaluation of the Low Corrosion Resistant Phase formed during the Sigma Phase Precipitation in Duplex Stainless Steels, Mater. Res., 2(4), 1999, p 239–247

T. Millot, J.M. Dring, Corrieu, and La Maontagne, Influence of Heat Treatment on the Characteristics of X2 Cr Ni Mo N 25-07 Super Duplex Stainless Steel – Comparison of Two Heavy Section Pipes, Proceedings of International Conference on Duplex Stainless Steels, 1997, p 213–217

J.O. Nilson, A. Wilson, The Influence of Isothermal Phase Transformations on Toughness and Pitting Corrosion in the Super Duplex Stainless Steel SAF 2507, Mater. Sci. Technol., 67(5), 1993, p 545–554

V.G. Gavriljuk and H. Berns, High Nitrogen Steels – Structure, Properties, Manufacture, Applications, Springer, New York, 1997, ISBN 3-540-66411-4

J. Son, S. Kim, J. Lee, B. Choi, Effect of N Addition on Tensile and Corrosion Behaviors of CD4MCU Cast Duplex Stainless Steels, Metall. Mater. Trans. A, 34A, 2003, p 1617–1625CrossRef

J.C. Lippold, I. Varol, W.A. Baeslack, The Influence of Composition and Microstructure on the HAZ Toughness of Duplex Stainless Steels at −20 °C, III. Welding J., 73(4), 1994, p 75s–79s

Y.H. Park, Z.-H. Lee, The Effect of Nitrogen and Heat Treatment on the Microstructure and Tensile Properties of 25Cr-7Ni-1.5Mo-3W-xN DSS Castings, Mater. Sci. Eng. A 297, 2001, p 78–84CrossRef

P. Chandramohan, S.S. Mohamed Nazirudeen, R. Srivatsavan, The Effect of Nitrogen Solubility, Heat Treatment and Hot Forging on 0.15% N Duplex Stainless Steels, Int. J. Mater. Prod. Technol. (IJMPT), 25(4), 2006, p 281–296CrossRef

10.

R.N. Gunn, Duplex Stainless steels-Microstructure, Properties and Applications, Abington Publishing, Cambridge, England, 1997

11.

F. Millet, J.-M. Pugnet, A. Franzi, B. Bonnefois, and J.-M. Lardon, New Proceedings Centrifugal Compressor in Super Duplex Stainless Steel, Proceedings of International Conference on Duplex Stainless Steels, 1997, p 713–722

12.

T. Havn, A. Morini, H. Salbu, and O. Strandmyr, Quality Improvements on Duplex and Superduplex Cast and Forged Products for Offshore Applications: Producer and User View Points, Proceedings of International Conference on Duplex Stainless Steels, 1997, p 191–199

13.

M.G. Mecozzi and M. Barteri, Effect of Alloying Elements and Impurity on Hot Ductility of 23% Cr 4% Ni Stainless Steel, Proceedings of International Conference on Duplex Stainless Steels, 1997, p 1011–1016

14.

J. Charles, Super Duplex Stainless Steels: Structure and Properties, Proceedings of International Conference on Duplex Stainless Steels, Beaune, France, 1991, p 3–48

15.

I. Samajdar, P. Ratchev, B. Verlinden, and E. Aernoudt, Hot Working of AA1050-Relating the Microstructural and Textural Developments, Acta Matter., 2001, 49(10), p 1759–1769CrossRef

16.

M. Kiran Kumar, I. Samajdar, N. Venkatramani, G.K. Dey, R. Tewari, D. Srivastava, S. Banerjee, Explaining Absence of Texture Development in Cold Rolled Two-phase Zr-2.5 wt% Nb Alloy, Acta Mater. 51, 2003, p 625–624CrossRef

17.

J. Johannson and M. Oden, Load Sharing between Austenite and Ferrite in a Duplex Stainless Steel during Cyclic Loading, Metall. Mater. Trans. A, 2000, 31A, p 1557–1570CrossRef

18.

J.J. Moveare, M. Oden, Influence of Elastic and Plastic Anisotropy on the Flow Behaviour in a Duplex Stainless Steels, Metall. Mater. Trans. A, 33A, 2002, p 57–71CrossRef

19.

W. Horvath, W. Prantl, H. StroiBnigg, E.A. Werner, Micro Hardness and Micro Structure of Austenite and Ferrite in Nitrogen Alloyed Duplex Stainless Steels between −20 and 500 °C, Mater. Sci. Eng. A 256, 1998, p 227–236CrossRef

20.

O. Balancin, W.A.M. Hoffman, J.J. Jonas, Influence of Microstructure on the Flow Behaviour of Duplex Stainless Steels at High Temperatures, Metall. Mater. Trans. A, 31A, 2000, p. 1353–1364CrossRef

21.

G.S. Reis, A.M. Jorge Jr., O. Balancin, Influence of the Microstructure of Duplex Stainless Steels on their Failure Characteristics During Hot Deformation, Mater. Res., 3(2), 2000, p 31–35

22.

J.A. Jimenez, F. Carreno, O.A. Ruano, M. Carsi, High Temperature Mechanical Behaviour of δ-γ Stainless Steel, Mater. Sci. Technol., 15, 1999, p 127–131

23.

F.E. Al Jouni, C.M. Sellars, Recrystallisation after Hot Deformation of Two Phase Stainless Steels, Mater. Sci. Technol., 19, 2003, p 1311–1320CrossRef

24.

M. Vedani Nicodemi, E. Gariboldi, W. Nicodemi, and R. Roberti, Centrifugally Cast and Cold Worked Duplex and Superduplex Stainless Steel Pipes, Proceedings of International Conference on Duplex Stainless Steels, 1997, p 245–254

25.

J. He, G. Han, S. Fukuyama, K. Yokagawa, Tensile Behaviour of Duplex Stainless Steel at Low Temperatures, Mater. Sci. Technol., 15, 1999, p 909–919

Titel: Studies on Production and Thermo-Mechanical Treatment of 0.32% Nitrogen Alloyed Duplex Stainless Steel
verfasst von: P. Chandramohan
S.S. Mohamed Nazirudeen
S.S. Ramakrishnan
Publikationsdatum: 01.04.2008
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 2/2008
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-007-9140-1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2008

Corrosion Inhibition of Zn-Al-Cu Alloy by 2-Aminothiazole

Impact of Selective Grain Refinement on Superplastic Deformation: Finite Element Analysis

Effect of Postweld Aging Treatment on Fatigue Behavior of Pulsed Current Welded AA7075 Aluminum Alloy Joints

Evaluation of Silicone Rubber Insulators used in High-Voltage Transmission Lines

Characterization of Superplastically Formed Friction Stir Weld in Titanium 6AL-4V: Preliminary Results

Saturated Fractional Design of Experiments: Toughness and Graphite Phase Optimizing in Nihard Cast Irons

Premium Partner

Marktübersichten