nach oben

Journal of Materials Engineering and Performance

Erschienen in:

12.07.2019

Study of Thermomechanical Behavior of Zirconium-0.3 Tin Alloy

verfasst von: S. K. Jha, Saurabh Dixit, Dinesh Srivastava

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 8/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Zirconium-based alloys are used in the manufacturing of nuclear fuel tubes. These tubes need to be clad with zirconium-tin (Zr-0.3 wt.% Sn) alloy to enhance the lives of tubes. Manufacturing of such clad tubes is a challenging task, due to work hardening and dynamic softening phenomenon. In this study, hot deformation behavior of Zr-0.3Sn alloy is investigated at different temperatures and strain rates. It is found that fully recrystallized microstructure can be obtained by working at around 900 °C and high strain rate of 10 s⁻¹. Further, constitutive equations are developed for the entire domain of deformation range and fitted into standard FEM-based simulation model for extrusion. The simulation results are validated with experimental data. The difference in flow stresses values obtained from numerical and experimental methods was around 14%.

Vorheriger Artikel Hot Deformation Behavior and Processing Map of a Fe-11Mn-10Al-0.9C Duplex Low-Density Steel Susceptible to κ-Carbides

Nächster Artikel Microstructure Optimization and Cracking Control of Additive Manufactured Bainite Steel by Gas Metal Arc Welding Technology

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

D.O. Northwood, The Development and Applications of Zirconium Alloys, Mater. Des., 1985, 6, p 58–70. https://doi.org/10.1016/0261-3069(85)90165-7 CrossRef

L. Hallstadius, S. Johnson, and E. Lahoda, Cladding for high Performance Fuel, Prog. Nucl. Energy, 2012, 57, p 71–76. https://doi.org/10.1016/j.pnucene.2011.10.008 CrossRef

R. Krishnan and M. Asundi, Zirconium Alloys in Nuclear Technology, Proc Indian Acad SciEngg Sci., 1981, 4, p 41–56

L.F.P. Van Swam and C.M. Eucken, ASTM Committee B-10 on Reactive and Refractory Metals and Alloys, International Atomic Energy Agency, eds., Zirconium in the nuclear industry: eighth international symposium, ASTM, Philadelphia, PA, 1989.

K. Edsinger and K.L. Murty, LWR Pellet-Cladding Interactions: Materials Solutions to SCC, JOM, 2001, 53, p 9–13. https://doi.org/10.1007/s11837-001-0079-7 CrossRef

B.A. Cheadle, C.E. Ells, and W. Evans, The Development of Texture in Zirconium Alloy Tubes, J. Nucl. Mater., 1967, 23, p 199–208. https://doi.org/10.1016/0022-3115(67)90065-7 CrossRef

Z. Chen, K. Ikeda, T. Murakami, T. Takeda, and J.-X. Xie, Fabrication of Composite Pipes by Multi-Billet Extrusion Technique, J. Mater. Process. Technol., 2003, 137, p 10–16. https://doi.org/10.1016/S0924-0136(02)01052-X CrossRef

H. Gegel, in Experimental Verification of Process Models (1983).

Y.V.R.K. Prasad, Author’s Reply: Dynamic Materials Model: Basis and Principles, Metall. Mater. Trans. A, 1996, 27, p 235–236. https://doi.org/10.1007/BF02647765 CrossRef

10.

Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark, and D.R. Barker, Modeling of Dynamic Material Behavior in Hot Deformation: Forging of Ti-6242, Metall. Trans. A, 1984, 15, p 1883–1892. https://doi.org/10.1007/BF02664902 CrossRef

11.

H. Sun, Y. Zhang, A.A. Volinsky, B. Wang, B. Tian, K. Song, Z. Chai, and Y. Liu, Effects of Ag Addition on Hot Deformation Behavior of Cu-Ni-Si Alloys: Effects of Ag Addition on Hot Deformation Behavior…, Adv. Eng. Mater., 2017, 19, p 1600607. https://doi.org/10.1002/adem.201600607 CrossRef

12.

Y. Zhang, H. Sun, A.A. Volinsky, B. Wang, B. Tian, Z. Chai, Y. Liu, and K. Song, Small Y Addition Effects on Hot Deformation Behavior of Copper-Matrix Alloys, Adv. Eng. Mater., 2017, 19, p 1700197. https://doi.org/10.1002/adem.201700197 CrossRef

13.

Y. Zhang, H. Sun, A.A. Volinsky, B. Wang, B. Tian, Y. Liu, and K. Song, Constitutive Model for Hot Deformation of the Cu-Zr-Ce Alloy, J. Mater. Eng. Perform., 2018, 27, p 728–738. https://doi.org/10.1007/s11665-018-3168-2 CrossRef

14.

Y.V.R.K. Prasad and T. Seshacharyulu, Modelling of Hot Deformation for Microstructural Control, Int. Mater. Rev., 1998, 43, p 243–258. https://doi.org/10.1179/imr.1998.43.6.243 CrossRef

15.

F. Montheillet, J.J. Jonas, and K.W. Neale, Modeling of Dynamic Material Behavior: A Critical Evaluation of the Dissipator Power Co-content Approach, Metall. Mater. Trans. A, 1996, 27, p 232–235. https://doi.org/10.1007/BF02647764 CrossRef

16.

S. Ghosh, Interpretation of Microstructural Evolution Using Dynamic Materials Modeling, Metall. Mater. Trans. A., 2000, 31, p 2973–2974. https://doi.org/10.1007/BF02830342 CrossRef

17.

S. Ghosh, Interpretation of Flow Instability Using Dynamic Material Modeling, Metall. Mater. Trans. A., 2002, 33, p 1569–1572. https://doi.org/10.1007/s11661-002-0081-x CrossRef

18.

Y.C. Lin, Y.-C. Xia, X.-M. Chen, and M.-S. Chen, Constitutive Descriptions for Hot Compressed 2124-T851 Aluminum Alloy Over a Wide Range of Temperature and Strain Rate, Comput. Mater. Sci., 2010, 50, p 227–233. https://doi.org/10.1016/j.commatsci.2010.08.003 CrossRef

19.

J.L. Derep, S. Ibrahim, R. Rouby, and G. Fantozzi, Deformation Behaviour of Zircaloy-4 Between 77 and 900 K, Acta Metall., 1980, 28, p 607–619. https://doi.org/10.1016/0001-6160(80)90127-3 CrossRef

20.

D.-X. Wen, Y.C. Lin, H.-B. Li, X.-M. Chen, J. Deng, and L.-T. Li, Hot Deformation Behavior and Processing Map of a Typical Ni-Based Superalloy, Mater. Sci. Eng. A., 2014, 591, p 183–192. https://doi.org/10.1016/j.msea.2013.09.049 CrossRef

21.

Y. Zhang, B. Tian, A.A. Volinsky, X. Chen, H. Sun, Z. Chai, P. Liu, and Y. Liu, Dynamic Recrystallization Model of the Cu-Cr-Zr-Ag Alloy Under Hot Deformation, J. Mater. Res., 2016, 31, p 1275–1285. https://doi.org/10.1557/jmr.2016.140 CrossRef

22.

J.K. Chakravartty, G.K. Dey, S. Banerjee, and Y.V.R.K. Prasad, Characterization of Hot Deformation Behaviour of Zr□2.5Nb□0.5Cu Using Processing Maps, J. Nucl. Mater. 218 (1995) 247–255. https://doi.org/10.1016/0022-3115(94)00379-3.

23.

J.K. Chakravartty, Y.V.R.K. Prasad, and M.K. Asundi, Processing Map for Hot Working of Alpha-Zirconium, Metall. Trans. A., 1991, 22, p 829–836. https://doi.org/10.1007/BF02658992 CrossRef

24.

Y.B. Tan, L.H. Yang, C. Tian, R.P. Liu, X.Y. Zhang, and W.C. Liu, Hot Deformation Behavior of ZrTiAlV Alloy with a Coarse Grain Structure in the β Phase Field, Mater. Sci. Eng. A., 2013, 577, p 218–224. https://doi.org/10.1016/j.msea.2013.04.056 CrossRef

25.

S.K. Singh, K. Chattopadhyay, and P. Dutta, High-Temperature Workability of Thixocast A356 Aluminum Alloy, Metall. Mater. Trans. A., 2015, 46, p 3248–3259. https://doi.org/10.1007/s11661-015-2855-y CrossRef

26.

B.K. Raghunath, K. Raghukandan, R. Karthikeyan, K. Palanikumar, U.T.S. Pillai, and R.A. Gandhi, Flow Stress Modeling of AZ91 Magnesium Alloys at Elevated Temperature, J. Alloys Compd., 2011, 509, p 4992–4998. https://doi.org/10.1016/j.jallcom.2011.01.182 CrossRef

27.

J.K. Chakravartty, S. Banerjee, Y.V.R.K. Prasad, and M.K. Asundi, Hot-Working Characteristics of Zircaloy-2 in the Temperature Range of 650-950 °C, J. Nucl. Mater., 1992, 187, p 260–271. https://doi.org/10.1016/0022-3115(92)90506-G CrossRef

28.

R. Kapoor and J.K. Chakravartty, Characterization of Hot Deformation Behaviour of Zr-2.5Nb in β phase, J. Nucl. Mater. 306 (2002) 126–133. https://doi.org/10.1016/s0022-3115(02)01290-4.

29.

J.K. Chakravartty, R. Kapoor, S. Banerjee, and Y.V.R.K. Prasad, Characterization of Hot Deformation Behavior of Zr-1Nb-1Sn Alloy, J. Nucl. Mater., 2007, 362, p 75–86. https://doi.org/10.1016/j.jnucmat.2006.11.007 CrossRef

30.

S.K. Singh, K. Chattopadhyay, G. Phanikumar, and P. Dutta, Experimental and Numerical Studies on Friction Welding of Thixocast A356 Aluminum Alloy, Acta Mater., 2014, 73, p 177–185. https://doi.org/10.1016/j.actamat.2014.04.019 CrossRef

31.

J. Chakravartty, Y. Prasad, and M. Asundi, Processing Map and Hot Working Characteristics of Zircaloy-2, in: C. Eucken, A. Garde (Eds.), Zircon. Nucl. Ind. Ninth Int. Symp., ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, 1991: pp. 48-48–14. https://doi.org/10.1520/stp25498s.

32.

K.V.M. Krishna, S.K. Sahoo, I. Samajdar, S. Neogy, R. Tewari, D. Srivastava, G.K. Dey, G.H. Das, N. Saibaba, and S. Banarjee, Microstructural and Textural Developments During Zircaloy-4 Fuel Tube Fabrication, J. Nucl. Mater., 2008, 383, p 78–85. https://doi.org/10.1016/j.jnucmat.2008.08.050 CrossRef

33.

S.K. Jha, S. Dixit, K. Chetan, K. Vaibhaw, and D. Srivastava, Co-extrusion of Zircaloy-2 and Zr-Sn Alloy for Double Clad Tube Manufacturing: Numerical Simulation and Experimental Validation, J. Manuf. Process., 2019, 39, p 18–25. https://doi.org/10.1016/j.jmapro.2019.01.048 CrossRef

34.

F. Ren, J. Chen, and F. Chen, Constitutive Modeling of Hot Deformation Behavior of X20Cr13 Martensitic Stainless Steel with Strain Effect, Trans. Nonferrous Met. Soc. China., 2014, 24, p 1407–1413. https://doi.org/10.1016/S1003-6326(14)63206-4 CrossRef

35.

W. Li, H. Li, Z. Wang, and Z. Zheng, Constitutive Equations for High Temperature Flow Stress Prediction of Al-14Cu-7Ce Alloy, Mater. Sci. Eng. A., 2011, 528, p 4098–4103. https://doi.org/10.1016/j.msea.2011.01.076 CrossRef

36.

L. Chen, G. Zhao, J. Yu, W. Zhang, and T. Wu, Analysis and Porthole Die Design for a Multi-Hole Extrusion Process of a Hollow, Thin-Walled Aluminum Profile, Int. J. Adv. Manuf. Technol., 2014, 74, p 383–392. https://doi.org/10.1007/s00170-014-6003-4 CrossRef

37.

C. Zhang, G. Zhao, H. Chen, Y. Guan, and F. Kou, Numerical Simulation and Metal Flow Analysis of Hot Extrusion Process for a Complex Hollow Aluminum Profile, Int. J. Adv. Manuf. Technol., 2012, 60, p 101–110. https://doi.org/10.1007/s00170-011-3609-7 CrossRef

38.

A. Farjad Bastani, T. Aukrust, and S. Brandal, Optimisation of Flow Balance and Isothermal Extrusion of Aluminium Using Finite-Element Simulations, J. Mater. Process. Technol. 211 (2011) 650–667. https://doi.org/10.1016/j.jmatprotec.2010.11.021.

39.

F. Parvizian, T. Kayser, C. Hortig, and B. Svendsen, Thermomechanical Modeling and Simulation of Aluminum Alloy Behavior During Extrusion and Cooling, J. Mater. Process. Technol., 2009, 209, p 876–883. https://doi.org/10.1016/j.jmatprotec.2008.02.076 CrossRef

40.

S.K. Jha, N. Keskar, K.I. Vishnu Narayan, K.V. Mani Krishna, D. Srivastava, G.K. Dey, and N. Saibaba, Microstructural and Textural Evolution During Hot Deformation of Dilute Zr-Sn alloy, J. Nucl. Mater. 482 (2016) 12–18. https://doi.org/10.1016/j.jnucmat.2016.09.028.

41.

L. Saintoyant, L. Legras, and Y. Bréchet, Effect of an Applied Stress on the Recrystallization Mechanisms of a Zirconium Alloy, Scr. Mater., 2011, 64, p 418–421. https://doi.org/10.1016/j.scriptamat.2010.11.003 CrossRef

42.

M.E. Kassner, M.T. Perez Prado, T.A. Hayes, L. Jiang, S.R. Barrabes, and I.F. Lee, Elevated Temperature Deformation of Zr to Large Strains, J. Mater. Sci. 48 (2013) 4492–4500. https://doi.org/10.1007/s10853-012-7060-4.

43.

C. Zener and J.H. Hollomon, Effect of Strain Rate Upon Plastic Flow of Steel, J. Appl. Phys., 1944, 15, p 22–32CrossRef

44.

S.S. Zhou, K.K. Deng, J.C. Li, K.B. Nie, F.J. Xu, H.F. Zhou, and J.F. Fan, Hot Deformation Behavior and Workability Characteristics of Bimodal Size SiCp/AZ91 Magnesium Matrix Composite with Processing Map, Mater. Des., 2014, 64, p 177–184. https://doi.org/10.1016/j.matdes.2014.07.039 CrossRef

45.

Y. Sun, Z. Wan, L. Hu, and J. Ren, Characterization of Hot Processing Parameters of Powder Metallurgy TiAl-Based Alloy Based on the Activation Energy Map and Processing Map, Mater. Des., 2015, 86, p 922–932. https://doi.org/10.1016/j.matdes.2015.07.140 CrossRef

46.

J. Li, F. Li, and J. Cai, Constitutive Model Prediction and Flow Behavior Considering Strain Response in the Thermal Processing for the TA15 Titanium Alloy, Materials., 2018, 11, p 1985. https://doi.org/10.3390/ma11101985 CrossRef

47.

A. Cingara and H.J. McQueen, New Formula for Calculating Flow Curves from High Temperature Constitutive Data for 300 Austenitic Steels, J. Mater. Process. Technol., 1992, 36, p 31–42. https://doi.org/10.1016/0924-0136(92)90236-L CrossRef

48.

D. Samantaray, S. Mandal, and A.K. Bhaduri, Constitutive Analysis to Predict High-Temperature Flow Stress in Modified 9Cr-1Mo (P91) Steel, Mater. Des., 2010, 31, p 981–984. https://doi.org/10.1016/j.matdes.2009.08.012 CrossRef

49.

H.L. Gegel, J.C. Malas, S.M. Doraievelu, and V.A. Shende, Metals Handbook, Vol. 14 (American Society for Metals, Metals Park, Ohio 1987), n.d.

50.

J.L.F. Aymone, E. Bittencourt, and G.J. Creus, Simulation of 3D Metal-Forming Using an Arbitrary Lagrangian-Eulerian Finite Element Method, J. Mater. Process. Technol., 2001, 110, p 218–232. https://doi.org/10.1016/S0924-0136(00)00886-4 CrossRef

51.

C. Zhang, G. Zhao, Z. Chen, H. Chen, and F. Kou, Effect of Extrusion Stem Speed on Extrusion Process for a Hollow Aluminum Profile, Mater. Sci. Eng. B., 2012, 177, p 1691–1697. https://doi.org/10.1016/j.mseb.2011.09.041 CrossRef

Titel: Study of Thermomechanical Behavior of Zirconium-0.3 Tin Alloy
verfasst von: S. K. Jha
Saurabh Dixit
Dinesh Srivastava
Publikationsdatum: 12.07.2019
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 8/2019
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-019-04204-x

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2019

Hot Deformation Behavior of Aluminum Alloys AA7010 and AA7075

Effect of a Zinc Interlayer on a Cu/Al Lap Joint in Ultrasound-Assisted Friction Stir Welding

High Strain Rate Response of Cenosphere-Filled Aluminum Alloy Syntactic Foam

Cyclic Thermal Oxidation Evaluation to Improve Ti6Al4V Surface in Applications as Biomaterial

High-Resolution Electron Microscopy and Kinetic Studies of Precipitation Hardening Reactions in Cast Al-5.8Zn-2.2Mg-2.5Cu

Characterizing Transformation Phenomena and Elastic Moduli of Austenite and Oriented Martensite of Superelastic Thin NiTi Wire through Isothermal Dynamic Mechanical Analysis

Premium Partner

Marktübersichten