Skip to main content
Erschienen in: Journal of Materials Engineering and Performance 8/2014

01.08.2014

Study of Unrecovered Strain and Critical Stresses in One-Way Shape Memory Nitinol

verfasst von: Mohammad Honarvar, Naresh V. Datla, Bardia Konh, Tarun K. Podder, Adam P. Dicker, Yan Yu, Parsaoran Hutapea

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 8/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Unique thermomechanical properties of Nitinol known as shape memory and superelasticity make it applicable for different fields such as biomedical, structural, and aerospace engineering. These unique properties are due to the comparatively large recoverable strain, which is being produced in a martensitic phase transformation. However, under certain ranges of stresses and temperatures, Nitinol wires exhibit unrecovered strain. For cyclic applications, it is important to understand the strain behavior of Nitinol wires. In this study, the unrecovered strain of different Nitinol wire diameters was investigated using constant stress experiment. Uniaxial tensile test has been also performed to find the range of critical stresses. It was observed that the unrecovered strain produced in the first loading-unloading cycle affects the total strain in the subsequent cycles. Moreover, a critical range of stress was found beyond which the unrecovered strain was negligible while the wires heated up to the range of 70-80°C, depending on the wire diameters. The unrecovered strain of wire diameters of 0.19 mm and less was found to be sensitive to the critical stress. On the other hand, for wire diameters bigger than 0.19 mm this connection between the unrecovered strain and the critical stress was not observed for the same range of heating temperature.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat T. Duerig, A. Pelton, and D. Stockel, An Overview of Nitinol Medical Applications, Mater. Sci. Eng. A, 1999, 273–275, p 149–160CrossRef T. Duerig, A. Pelton, and D. Stockel, An Overview of Nitinol Medical Applications, Mater. Sci. Eng. A, 1999, 273–275, p 149–160CrossRef
2.
Zurück zum Zitat T.K. Podder, A.P. Dicker, P. Hutapea, and Y. Yu, A Novel Curvilinear Approach for Prostate Seed Implantation, Med. Phys., 2012, 39, p 1887–1892CrossRef T.K. Podder, A.P. Dicker, P. Hutapea, and Y. Yu, A Novel Curvilinear Approach for Prostate Seed Implantation, Med. Phys., 2012, 39, p 1887–1892CrossRef
3.
Zurück zum Zitat B. Konh, N.V. Datla, M. Honarvar, T.K. Podder, A.P. Dicker, Y. Yu, and P. Hutapea, Design Exploration Study of a Shape Memory Alloy Actuated Surgical Needle, J. Intelligent Mater. Syst. Struct., 2014 (in press) B. Konh, N.V. Datla, M. Honarvar, T.K. Podder, A.P. Dicker, Y. Yu, and P. Hutapea, Design Exploration Study of a Shape Memory Alloy Actuated Surgical Needle, J. Intelligent Mater. Syst. Struct., 2014 (in press)
4.
Zurück zum Zitat B. Konh, N.V. Datla, and P. Hutapea, Feasibility of SMA Wire Actuation for an Active Steerable Cannula, J. Med. Devices, 2014 (under review) B. Konh, N.V. Datla, and P. Hutapea, Feasibility of SMA Wire Actuation for an Active Steerable Cannula, J. Med. Devices, 2014 (under review)
5.
Zurück zum Zitat N.V. Datla, B. Konh, M. Honarvar, T.K. Podder, A.P. Dicker, Y. Yu, and P. Hutapea, A Model to Predict Deflection of Bevel-Tipped Active Needle Advancing in Soft Tissue, Med. Eng. Phys., 2014, 36(3), p 285–293CrossRef N.V. Datla, B. Konh, M. Honarvar, T.K. Podder, A.P. Dicker, Y. Yu, and P. Hutapea, A Model to Predict Deflection of Bevel-Tipped Active Needle Advancing in Soft Tissue, Med. Eng. Phys., 2014, 36(3), p 285–293CrossRef
6.
Zurück zum Zitat N.V. Datla, B. Konh, J.J. Koo, D.K. Choi, Y. Yu, A.P. Dicker, T.K. Podder, K. Darvish, and P. Hutapea, Polyacrylamide Phantom for Self-actuating Needle-Tissue Interaction Studies, Med. Eng. Phys., 2014, 36, p 140–145CrossRef N.V. Datla, B. Konh, J.J. Koo, D.K. Choi, Y. Yu, A.P. Dicker, T.K. Podder, K. Darvish, and P. Hutapea, Polyacrylamide Phantom for Self-actuating Needle-Tissue Interaction Studies, Med. Eng. Phys., 2014, 36, p 140–145CrossRef
7.
Zurück zum Zitat B. Konh, M. Honarvar, and P. Hutapea, Application of SMA Wire for an Active Steerable Cannula, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, 2013 B. Konh, M. Honarvar, and P. Hutapea, Application of SMA Wire for an Active Steerable Cannula, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, 2013
8.
Zurück zum Zitat M. Honarvar, B. Konh, N.V. Datla, S. Devlin, and P. Hutapea, Size Effect on the Critical Stress of Nitinol Wires, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, 2013 M. Honarvar, B. Konh, N.V. Datla, S. Devlin, and P. Hutapea, Size Effect on the Critical Stress of Nitinol Wires, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, 2013
9.
Zurück zum Zitat N.V. Datla, M. Honarvar, T.M. Nguyen, B. Konh, K. Darvish, Y. Yu, A.P. Dicker, T.K. Podder, and P. Hutapea, Towards a Nitinol Actuator for an Active Surgical Needle, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, GA, 2012 N.V. Datla, M. Honarvar, T.M. Nguyen, B. Konh, K. Darvish, Y. Yu, A.P. Dicker, T.K. Podder, and P. Hutapea, Towards a Nitinol Actuator for an Active Surgical Needle, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, GA, 2012
10.
Zurück zum Zitat W. Huang, On the Selection of Shape Memory Alloys for Actuators, Mater. Des., 2002, 23, p 11–19CrossRef W. Huang, On the Selection of Shape Memory Alloys for Actuators, Mater. Des., 2002, 23, p 11–19CrossRef
11.
Zurück zum Zitat A. Saigal and M. Fonte, Solid, Shape Recovered “Bulk” Nitinol: Part I-Tension-Compression Asymmetry, Mater. Sci. Eng. A, 2011, 528, p 5536–5550CrossRef A. Saigal and M. Fonte, Solid, Shape Recovered “Bulk” Nitinol: Part I-Tension-Compression Asymmetry, Mater. Sci. Eng. A, 2011, 528, p 5536–5550CrossRef
12.
Zurück zum Zitat J.F. Dyet, G.W. Watts, D.F. Ettles, and A.A. Nicholson, Mechanical Properties of Metallic Stents: How do These Properties Influence the Choice of Stent for Specific Lesions?, Cardiovasc. Intervent. Radiol., 2000, 23, p 47–54CrossRef J.F. Dyet, G.W. Watts, D.F. Ettles, and A.A. Nicholson, Mechanical Properties of Metallic Stents: How do These Properties Influence the Choice of Stent for Specific Lesions?, Cardiovasc. Intervent. Radiol., 2000, 23, p 47–54CrossRef
13.
Zurück zum Zitat C.B. Churchill and J.A. Shaw, Shakedown Response of Conditioned Shape Memory Alloy Wire, SPIE 6929, Behavior and Mechanics of Multifunctional and Composite Materials, M.J. Dapino, Z. Ounaies, Eds., San Diego, CA, 2008, 6928. C.B. Churchill and J.A. Shaw, Shakedown Response of Conditioned Shape Memory Alloy Wire, SPIE 6929, Behavior and Mechanics of Multifunctional and Composite Materials, M.J. Dapino, Z. Ounaies, Eds., San Diego, CA, 2008, 6928.
14.
Zurück zum Zitat N. Troisfontaine, P. Bidaud, and M. Larnicol, Optimal Design of Micro-actuators Based on SMA Wires, Smart Mater. Struct., 1999, 8, p 197–203CrossRef N. Troisfontaine, P. Bidaud, and M. Larnicol, Optimal Design of Micro-actuators Based on SMA Wires, Smart Mater. Struct., 1999, 8, p 197–203CrossRef
15.
Zurück zum Zitat I. Mihalcz, Fundamental Characteristics and Design Method for Nickel-Titanium Shape Memory Alloy, Periodica Polytech Ser. Mech. Eng., 2001, 45(1), p 75–86 I. Mihalcz, Fundamental Characteristics and Design Method for Nickel-Titanium Shape Memory Alloy, Periodica Polytech Ser. Mech. Eng., 2001, 45(1), p 75–86
16.
Zurück zum Zitat L.C. Brinson, One-Dimensional Constitutive Behavior of Shape Memory Alloys: Thermomechacnical Derivation with Non-constant Material Functions and Redefined Martensite Internal Variable, J. Intell. Mater. Syst. Struct., 1993, 4(2), p 229–242CrossRef L.C. Brinson, One-Dimensional Constitutive Behavior of Shape Memory Alloys: Thermomechacnical Derivation with Non-constant Material Functions and Redefined Martensite Internal Variable, J. Intell. Mater. Syst. Struct., 1993, 4(2), p 229–242CrossRef
17.
Zurück zum Zitat V. Waitz, T. Antretter, F.D. Fischer, and H.P. Karnthaler, Size Effects on Martensitic Phase Transformation in Nanocrystalline NiTi Shape Memory Alloys, Mater. Sci. Technol., 2008, 24(8), p 934–940CrossRef V. Waitz, T. Antretter, F.D. Fischer, and H.P. Karnthaler, Size Effects on Martensitic Phase Transformation in Nanocrystalline NiTi Shape Memory Alloys, Mater. Sci. Technol., 2008, 24(8), p 934–940CrossRef
18.
Zurück zum Zitat Y.Q. Fu, S. Zhang, M.J. Wu, W.M. Huang, H.J. Du, J.K. Luo, A.J. Flewitt, and W.I. Milne, On the Lower Thickness Boundary of Sputtered NiTi Films for Shape Memory Application, Thin Solid Films, 2006, 515, p 80–86CrossRef Y.Q. Fu, S. Zhang, M.J. Wu, W.M. Huang, H.J. Du, J.K. Luo, A.J. Flewitt, and W.I. Milne, On the Lower Thickness Boundary of Sputtered NiTi Films for Shape Memory Application, Thin Solid Films, 2006, 515, p 80–86CrossRef
19.
Zurück zum Zitat C.P. Frick, S. Orso, and E. Arzt, Loss of Pseudoelasticity in Nickel-Titanium Sub-micron Compression Pillars, Acta Mater., 2007, 55, p 3845–3855CrossRef C.P. Frick, S. Orso, and E. Arzt, Loss of Pseudoelasticity in Nickel-Titanium Sub-micron Compression Pillars, Acta Mater., 2007, 55, p 3845–3855CrossRef
20.
Zurück zum Zitat Y. Chen and C.A. Schuh, Size Effects in Shape Memory Alloy Microwires, Acta Mater., 2011, 59, p 537–553CrossRef Y. Chen and C.A. Schuh, Size Effects in Shape Memory Alloy Microwires, Acta Mater., 2011, 59, p 537–553CrossRef
21.
Zurück zum Zitat J.M. San Juan, L.M. No, and C.A. Schuh, Superelasticity and Shape Memory in Micro- and Nano-meter Scale Pillars, Adv. Mater., 2008, 20, p 272–278CrossRef J.M. San Juan, L.M. No, and C.A. Schuh, Superelasticity and Shape Memory in Micro- and Nano-meter Scale Pillars, Adv. Mater., 2008, 20, p 272–278CrossRef
22.
Zurück zum Zitat H.S. Liu, Jr, and L. Mishnaevsky, Martensitic Transformation in Nanostructured Nitinol: Finite Element Modeling of Grain Size and Distribution Effects, Comput. Mater. Sci., 2013, 76, p 27–36CrossRef H.S. Liu, Jr, and L. Mishnaevsky, Martensitic Transformation in Nanostructured Nitinol: Finite Element Modeling of Grain Size and Distribution Effects, Comput. Mater. Sci., 2013, 76, p 27–36CrossRef
23.
Zurück zum Zitat L. An, W.M. Huang, Y.Q. Fu, and N.Q. Guo, A Note on Size Effect in Actuating NiTi Shape Memory Alloys by Electrical Current, Mater. Des., 2008, 29, p 1432–1437CrossRef L. An, W.M. Huang, Y.Q. Fu, and N.Q. Guo, A Note on Size Effect in Actuating NiTi Shape Memory Alloys by Electrical Current, Mater. Des., 2008, 29, p 1432–1437CrossRef
24.
Zurück zum Zitat D.W. Norwich and A. Fasching, Study of the Effect of Diameter on the Fatigue Properties of NiTi Wires, J. Mater. Eng. Perform., 2009, 18(5), p 558–562CrossRef D.W. Norwich and A. Fasching, Study of the Effect of Diameter on the Fatigue Properties of NiTi Wires, J. Mater. Eng. Perform., 2009, 18(5), p 558–562CrossRef
25.
Zurück zum Zitat S. Civjan, E.F. Huget, and L.B. DeSimon, Potential Applications of Certain Nickel-Titanium (Nitinol) Alloys, J. Dent. Res., 2012, 54(1), p 89–96CrossRef S. Civjan, E.F. Huget, and L.B. DeSimon, Potential Applications of Certain Nickel-Titanium (Nitinol) Alloys, J. Dent. Res., 2012, 54(1), p 89–96CrossRef
26.
Zurück zum Zitat S. Leclercq and C. Lexcellent, A General Macroscopic Description of the Thermomechanical Behavior of Shape Memory Alloys, J. Mech. Phys. Solids, 1996, 44(6), p 953–980CrossRef S. Leclercq and C. Lexcellent, A General Macroscopic Description of the Thermomechanical Behavior of Shape Memory Alloys, J. Mech. Phys. Solids, 1996, 44(6), p 953–980CrossRef
27.
Zurück zum Zitat Y. Liu and J. Van Humbeeck, Luders-Like Deformation Associated with Martensite Reorientation in NiTi, Scr. Mater., 1998, 39(8), p 1047–1055CrossRef Y. Liu and J. Van Humbeeck, Luders-Like Deformation Associated with Martensite Reorientation in NiTi, Scr. Mater., 1998, 39(8), p 1047–1055CrossRef
28.
Zurück zum Zitat M.H. Elahinia, M. Hashemi, M. Tabesh, and S.B. Bhaduri, Manufacturing and Processing of NiTi Implants: A review, Prog. Mater. Sci., 2012, 57, p 911–946CrossRef M.H. Elahinia, M. Hashemi, M. Tabesh, and S.B. Bhaduri, Manufacturing and Processing of NiTi Implants: A review, Prog. Mater. Sci., 2012, 57, p 911–946CrossRef
29.
Zurück zum Zitat Y. Liu and Z. Xie, Progress in Smart Materials and Structures, chap. 3, Detwinning in Shape Memory Alloy, P.L. Recee, Ed., Nova Science Publishers Inc, Singapore, 2007, p 29–65 Y. Liu and Z. Xie, Progress in Smart Materials and Structures, chap. 3, Detwinning in Shape Memory Alloy, P.L. Recee, Ed., Nova Science Publishers Inc, Singapore, 2007, p 29–65
30.
Zurück zum Zitat R. Delville, B. Malard, J. Pilch, P. Sittner, and D. Schryvers, Transmission Electron Microscopy Investigation of Dislocation Slip During Superelastic Cycling of Ni-Ti Wires, Int. J. Plast., 2011, 27, p 282–297CrossRef R. Delville, B. Malard, J. Pilch, P. Sittner, and D. Schryvers, Transmission Electron Microscopy Investigation of Dislocation Slip During Superelastic Cycling of Ni-Ti Wires, Int. J. Plast., 2011, 27, p 282–297CrossRef
31.
Zurück zum Zitat Y. Liu, Z.L. Xie, J. Van Humbeeck, and L. Delaey, Effect of Texture Orientation on the Martensite Deformation of NiTi Shape Memory Alloy Sheet, Acta Metall., 2009, 47(2), p 645–660 Y. Liu, Z.L. Xie, J. Van Humbeeck, and L. Delaey, Effect of Texture Orientation on the Martensite Deformation of NiTi Shape Memory Alloy Sheet, Acta Metall., 2009, 47(2), p 645–660
32.
Zurück zum Zitat D.C. Lagoudas and S.G. Shu, Residual Deformation of Active Structures with SMA Actuators, Int. J. Mech. Sci., 1999, 41(6), p 595–619CrossRef D.C. Lagoudas and S.G. Shu, Residual Deformation of Active Structures with SMA Actuators, Int. J. Mech. Sci., 1999, 41(6), p 595–619CrossRef
33.
Zurück zum Zitat S. Daly, G. Ravichandran, and K. Bhattacharya, Stress-Induced Martensitic Phase Transformation in Thin Sheets of Nitinol, Acta Mater., 2007, 55(10), p 3593–3600CrossRef S. Daly, G. Ravichandran, and K. Bhattacharya, Stress-Induced Martensitic Phase Transformation in Thin Sheets of Nitinol, Acta Mater., 2007, 55(10), p 3593–3600CrossRef
34.
Zurück zum Zitat H. Sayyaadi, M.R. Zakerzadeh, and H. Salehi, A Comparative Analysis of Some One-Dimensional Shape Memory Alloy Constitutive Models Based on Experimental Tests, Sci. Iranica, 2012, 19(2), p 249–257CrossRef H. Sayyaadi, M.R. Zakerzadeh, and H. Salehi, A Comparative Analysis of Some One-Dimensional Shape Memory Alloy Constitutive Models Based on Experimental Tests, Sci. Iranica, 2012, 19(2), p 249–257CrossRef
35.
Zurück zum Zitat J.M. McNaney, V. Imbeni, Y. Jung, P. Papadopoulos, and R.O. Ritchie, An Experimental Study of the Superelastic Effect in a Shape-Memory Nitinol alloy Under Biaxial Loading, Mech. Mater., 2003, 35, p 969–986CrossRef J.M. McNaney, V. Imbeni, Y. Jung, P. Papadopoulos, and R.O. Ritchie, An Experimental Study of the Superelastic Effect in a Shape-Memory Nitinol alloy Under Biaxial Loading, Mech. Mater., 2003, 35, p 969–986CrossRef
36.
Zurück zum Zitat D.C. Lagoudas, Shape Memory Alloys Modeling and Engineering Application, Chap. 2, Springer, New York, 2008, p 64–75 D.C. Lagoudas, Shape Memory Alloys Modeling and Engineering Application, Chap. 2, Springer, New York, 2008, p 64–75
37.
Zurück zum Zitat Y. Liu and D. Favier, Stabilisation of Martensite Due to Shear Deformation Via Variant Reorientation in Polycrystalline NiTi, Acta Mater., 2000, 48, p 3489–3499CrossRef Y. Liu and D. Favier, Stabilisation of Martensite Due to Shear Deformation Via Variant Reorientation in Polycrystalline NiTi, Acta Mater., 2000, 48, p 3489–3499CrossRef
38.
Zurück zum Zitat M. Iijima, M. Ohta, W.A. Brantley, A. Naganishi, T. Murakami, T. Muguruma, and I. Mizoguchi, Transformation Behavior of Nickel-Titanium Orthodontic Wires Under Tensile Load, Dent. Mater. J., 2011, 30(3), p 398–403CrossRef M. Iijima, M. Ohta, W.A. Brantley, A. Naganishi, T. Murakami, T. Muguruma, and I. Mizoguchi, Transformation Behavior of Nickel-Titanium Orthodontic Wires Under Tensile Load, Dent. Mater. J., 2011, 30(3), p 398–403CrossRef
Metadaten
Titel
Study of Unrecovered Strain and Critical Stresses in One-Way Shape Memory Nitinol
verfasst von
Mohammad Honarvar
Naresh V. Datla
Bardia Konh
Tarun K. Podder
Adam P. Dicker
Yan Yu
Parsaoran Hutapea
Publikationsdatum
01.08.2014
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 8/2014
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-014-1077-6

Weitere Artikel der Ausgabe 8/2014

Journal of Materials Engineering and Performance 8/2014 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.