nach oben

Advances in Manufacturing

05.01.2024

Study on a probabilistic algorithm for the forming and 3D characterization of special-shaped surfaces under profile grinding

verfasst von: Zhao-Qing Zhang, Kai-Ning Shi, Yao-Yao Shi, Yi-Hui Song, Zhe He, Ya-Song Pu

Erschienen in: Advances in Manufacturing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Profile grinding is the most crucial method for the ultra-precision machining of special-shaped surfaces. However, profile grinding produces a unique machining profile, and many random factors in the machining process lead to complex surface characteristics. In this study, the structural and probabilistic characteristics of the profile grinding of a special-shaped surface were analyzed, and a probabilistic algorithm for the forming and 3D characterization of special-shaped surfaces under profile grinding was developed. The forming process of a GH738 blade tenon tooth surface was considered as an example to demonstrate the algorithm. The comparison results showed that the simulation results had similar surface characteristics to the measurement results, and the relative error range of the 3D roughness parameter was 0.21%–19.76%, indicating an accurate prediction and characterization of the complex special-shaped surface under the action of multiple factors.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Chen T, Miao Q, Xiong M et al (2022) On the residual stresses of turbine blade root of γ-TiAl intermetallic alloys induced by non-steady-state creep feed profile grinding. J Manuf Process 82:800–817CrossRef

Kuang W, Miao Q, Ding W et al (2021) Fretting wear behaviour of machined layer of nickel-based superalloy produced by creep-feed profile grinding. Chin J Aeronaut 35(10):401–411CrossRef

Grimmert A, Wiederkehr P (2021) Macroscopic process simulation of surface and profile grinding processes estimating forces for the production of turbine blades. Procedia CIRP 102:126–131CrossRef

Zhao Z, Qian N, Ding W et al (2020) Profile grinding of DZ125 nickel-based superalloy: grinding heat, temperature field, and surface quality. J Manuf Process 57:10–22CrossRef

Xi X, Ding W, Wu Z et al (2021) Performance evaluation of creep feed grinding of γ-TiAl intermetallics with electroplated diamond wheels. Chin J Aeronaut 34(6):100–109CrossRef

Schieber C, Hettig M, Zaeh M et al (2021) Evaluation of approaches to compensate the thermo-mechanical distortion effects during profile grinding. Procedia CIRP 102:331–336CrossRef

Guba N, Heinzel J, Heinzel C et al (2020) Grinding burn limits: Generation of surface layer modification charts for discontinuous profile grinding with analogy trials. CIRP J Manuf Sci Tec 31:99–107CrossRef

Kuang W, Miao Q, Ding W et al (2021) Residual stresses of turbine blade root produced by creep-feed profile grinding: three-dimensional simulation based on workpiece-grain interaction and experimental verification. J Manuf Process 62:67–79CrossRef

He Y, Xiao G, Zhu S et al (2023) Surface formation in laser-assisted grinding high-strength alloys. Int J Mach Tool Manu 186:104002. https://doi.org/10.1016/j.ijmachtools.2023.104002CrossRef

10.

Liu S, Xiao G, Lin O et al (2023) A new one-step approach for the fabrication of microgrooves on Inconel 718 surface with microporous structure and nanoparticles having ultrahigh adhesion and anisotropic wettability: laser belt processing. Appl Surf Sci 607:155108. https://doi.org/10.1016/j.apsusc.2022.155108CrossRef

11.

Sun C, Xiu S, Hong Y et al (2020) Prediction on residual stress with mechanical-thermal and transformation coupled in DGH. Int J Mech Sci 179:105629. https://doi.org/10.1016/j.ijmecsci.2020.105629CrossRef

12.

Li C, Piao Y, Zhang F et al (2023) Understand anisotropy dependence of damage evolution and material removal during nanoscratch of MgF₂ single crystals. Int J Extrem Manuf 5(1):015101. https://doi.org/10.1088/2631-7990/ac9eedCrossRef

13.

Li C, Hu Y, Zhang F et al (2023) Molecular dynamics simulation of laser assisted grinding of GaN crystals. Int J Mech Sci 239:107856. https://doi.org/10.1016/j.ijmecsci.2022.107856CrossRef

14.

Miao Q, Ding W, Kuang W et al (2021) Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels. Chin J Aeronaut 34(2):576–585CrossRef

15.

Xiao Y, Wang S, Ma C et al (2022) Numerical modeling of material removal mechanism and surface topography for gear profile grinding. J Manuf Process 76:719–739CrossRef

16.

Feng H, Xiang D, Wu B et al (2019) Ultrasonic vibration-assisted grinding of blind holes and internal threads in cemented carbides. Int J Adv Manuf Tech 104(1/4):1357–1367CrossRef

17.

Lei X, Xiang D, Peng P et al (2021) Establishment of dynamic grinding force model for ultrasonic-assisted single abrasive high-speed grinding. J Mater Process Tech 300:117420. https://doi.org/10.1016/j.jmatprotec.2021.117420CrossRef

18.

Yang Z, He D, Wang S et al (2021) Determination of the grinding force on optical glass based on a diamond wheel with an ordered arrangement of abrasive grains. Int J Adv Manuf Tech 115(4):1237–1248CrossRef

19.

Zhao B, Guo X, Bie W et al (2020) Thermo-mechanical coupling effect on surface residual stress during ultrasonic vibration-assisted forming grinding gear. J Manuf Process 59:19–32CrossRef

20.

Li C, Li X, Wu Y et al (2019) Deformation mechanism and force modelling of the grinding of YAG single crystals. Int J Mach Tool Manu 143:23–37CrossRef

21.

Agarwal S, Rao P (2012) Predictive modeling of undeformed chip thickness in ceramic grinding. Int J Mach Tool Manu 56:59–68CrossRef

22.

Yu S, Yao P, Ye Z et al (2022) Simulation and experimental research of tool path planning on profile and surface generation of aspherical-cylindrical lens array by ultra-precision envelope grinding. J Mater Process Tech 307:117690. https://doi.org/10.1016/j.jmatprotec.2022.117690CrossRef

23.

Zhang Z, Yao P, Wang J et al (2019) Analytical modeling of surface roughness in precision grinding of particle reinforced metal matrix composites considering nanomechanical response of material. Int J Mech Sci 157/158:243–253CrossRef

24.

Hong Y, Sun C, Xiu S et al (2023) Strengthening surface generation mechanism of carburizing-assisted grinding. Tribol Int 180:108300. https://doi.org/10.1016/j.triboint.2023.108300CrossRef

25.

Li C, Piao Y, Meng B et al (2022) Phase transition and plastic deformation mechanisms induced by self-rotating grinding of GaN single crystals. Int J Mach Tool Manu 172:103827. https://doi.org/10.1016/j.ijmachtools.2021.103827CrossRef

26.

Chen H, Tang J, Zhou W (2013) Modeling and predicting of surface roughness for generating grinding gear. J Mater Process Tech 213(5):717–721CrossRef

27.

Zhou W, Tang J, Shao W (2020) Study on surface generation mechanism and roughness distribution in gear profile grinding. Int J Mech Sci 187:105921. https://doi.org/10.1016/j.ijmecsci.2020.105921CrossRef

28.

Yang Y, Wu Y, Tsai T (2022) An analytical method to control and predict grinding textures on modified gear tooth flanks in CNC generating gear grinding. Mech Mach Theory 177:105023. https://doi.org/10.1016/j.mechmachtheory.2022.105023CrossRef

29.

Setti D, Ghosh S, Rao P (2017) A method for prediction of active grits count in surface grinding. Wear 382/383:71–77CrossRef

30.

Younis MA, Alawi H (1984) Probabilistic analysis of the surface grinding process. T Can Soc Mech Eng 8(4):208–213CrossRef

31.

Jiang J, Ge P, Hong J (2013) Study on micro-interacting mechanism modeling in grinding process and ground surface roughness prediction. Int J Adv Manuf Tech 67(5/8):1035–1052CrossRef

32.

Yan Y, Zhang Z, Zhao B et al (2021) Study on prediction of three-dimensional surface roughness of nano-ZrO₂ ceramics under two-dimensional ultrasonic-assisted grinding. Int J Adv Manuf Tech 112(9/10):2623–2638CrossRef

Titel: Study on a probabilistic algorithm for the forming and 3D characterization of special-shaped surfaces under profile grinding
verfasst von: Zhao-Qing Zhang
Kai-Ning Shi
Yao-Yao Shi
Yi-Hui Song
Zhe He
Ya-Song Pu
Publikationsdatum: 05.01.2024
Verlag: Shanghai University
Erschienen in: Advances in Manufacturing
Print ISSN: 2095-3127
Elektronische ISSN: 2195-3597
DOI: https://doi.org/10.1007/s40436-023-00467-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht