nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

04.11.2022 | ORIGINAL ARTICLE

Study on the distribution, element characteristics, and formation mechanism of porosity during laser welding for Ti-6Al-4V bottom-locking joint

verfasst von: Xufeng Kang, Tingyan Yan, Leilei Wang, Qiyu Gao, Xiaohong Zhan

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 7-8/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The bottom-locking joint is widely used in the aerospace manufacturing field as an imperative connection structure. The laser welding experiment for the Ti-6Al-4V titanium alloy bottom-locking joint is carried out in the present paper. Meanwhile, porosity in the weld seam including the process porosity and metallurgical porosity is investigated. Furthermore, it is novel that the distribution, element characteristics, and formation mechanism of process porosities and metallurgical porosities in the bottom-locking joint are comprehensively analysed based on the porosity morphology, microstructure, and element analysis of the resultant bottom-locking joints. The process porosity, which mainly appeared in the weld seam centre, is formed by the combined effect of two mechanisms which closely related to the dynamic behaviour of the molten pool and the stability of the keyhole. Besides, a large number of micropores with a diameter of 2–5 µm are observed on the surface of the process porosity, whose formation is related to the evaporation of elements. Moreover, the tensile stress generated during the solidification and shrinkage of the molten metal is the main factor leading to microcracks in the micropores. The nucleation characteristics of bubbles cause metallurgical porosities to be mainly distributed at the bottom of the weld seam.

Vorheriger Artikel Effect of kinematic parameters considering workpiece rotation on surface quality in YAG double-sided planetary lapping with the trajectory method

Nächster Artikel Performance comparison of machine learning models for kerf width prediction in pulsed laser cutting

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Leyens C, Peters M (2003) Titanium and titanium alloys: fundamentals and applications. Wiley‐VCH Verlag GmbH & Co. KGaA:333-350. https://doi.org/10.1002/3527602119

Chamanfar A, Pasang T, Ventura A, Misiolek WZ (2016) Mechanical properties and microstructure of laser welded Ti-6Al-2Sn-4Zr-2Mo (Ti6242) titanium alloy. Mater Sci Eng A 663:213–224. https://doi.org/10.1016/j.msea.2016.02.068CrossRef

Singh P, Pungotra H, Kalsi NS (2017) On the characteristics of titanium alloys for the aircraft applications. Mater Today Proc 4:8971–8982. https://doi.org/10.1016/j.matpr.2017.07.249CrossRef

Quazi MM, Ishak M, Fazal MA, Arslan A, Rubaiee S, Qaban A, Aiman MH, Sultan T, Ali MM, Manladan SM (2020) Current research and development status of dissimilar materials laser welding of titanium and its alloys. Opt Laser Technol 126:106090. https://doi.org/10.1016/j.optlastec.2020.106090CrossRef

Zhou ZH, Zhan XH, Gao ZN, Yan TY, Liu JZ (2020) Effect of welding direction on deformation of Ti6Al4V alloy coplanar double lap-joint produced by dual laser beam bilateral synchronous welding. Opt Laser Technol 131:106447. https://doi.org/10.1016/j.optlastec.2020.106447CrossRef

Zhao YQ, Zhan XH, Chen S, Bai MY, Gong XR (2020) Study on the shear performance and fracture mechanism of T-joints for 2219 aluminum alloy by dual laser-beam bilateral synchronous welding. J Alloys Compd 847:156511. https://doi.org/10.1016/j.jallcom.2020.156511CrossRef

Qi N, Zhan XH, Chen S, Chen D, He S (2020) Effect of laser power on tensile performance of TA15 laser-welded lock bottom joint. Met Mater Int. https://doi.org/10.1007/s12540-020-00737-2CrossRef

Zhan XH, Peng QY, Wei YH, Ou WM (2017) Experimental and simulation study on the microstructure of TA15 titanium alloy laser beam welded joints. Opt Laser Technol 94:279–289. https://doi.org/10.1016/j.optlastec.2017.03.014CrossRef

Fu YL, Guo N, Zhu BH, Shi XZ, Feng JC (2020) Microstructure and properties of underwater laser welding of TC4 titanium alloy. J Mater Process Technol 275:116372. https://doi.org/10.1016/j.jmatprotec.2019.116372CrossRef

10.

Zhang SW, Wang YD, Zhu MH, Feng YQ, Nie PL, Li ZG (2020) Effects of heat source arrangements on laser-MAG hybrid welding characteristics and defect formation mechanism of 10CrNi3MoV steel. J Manuf Process 58:563–573. https://doi.org/10.1016/j.jmapro.2020.08.027CrossRef

11.

Lei ZL, Dong ZJ, Chen YB, Huang L, Zhu RC (2013) Microstructure and mechanical properties of laser welded Ti-22Al-27Nb/TC4 dissimilar alloys. Mater Sci Eng A 559:909–916. https://doi.org/10.1016/j.msea.2012.09.057CrossRef

12.

Tao W, Yang SL (2020) Weld zone porosity elimination process in remote laser welding of AA5182-O aluminum alloy lap-joints. J Mater Process Technol 286:116826. https://doi.org/10.1016/j.jmatprotec.2020.116826CrossRef

13.

Neto FC, Pereira M, Santos Paes LE, Fredel MC, Bossa LF (2021) Effect of power modulation frequency on porosity formation in laser welding of SAE 1020 steels. Int J Adv Manuf Technol 112:2509–2517. https://doi.org/10.1007/s00170-020-06482-5CrossRef

14.

Chen L, Wang CM, Xiong LD, Zhang X, Mi GY (2020) Microstructural, porosity and mechanical properties of lap joint laser welding for 5182 and 6061 dissimilar aluminum alloys under different place configurations. Mater Des 191:108625. https://doi.org/10.1016/j.matdes.2020.108625CrossRef

15.

Zhan XH, Zhao YQ, Liu ZM, Gao QY, Bu HC (2018) Microstructure and porosity characteristics of 5A06 aluminum alloy joints using laser-MIG hybrid welding. J Manuf Process 35:437–445. https://doi.org/10.1016/j.jmapro.2018.08.011CrossRef

16.

Xu XK, Song G, Zhao S, Liu LM (2020) Effect of distance between the heat sources on energy transfer behavior in keyhole during laser-GTA welding titanium alloy. J Manuf Process 55:317–325. https://doi.org/10.1016/j.jmapro.2020.04.041CrossRef

17.

Jiang M, Chen X, Chen YB, Tao W (2020) Mitigation of porosity defects in fiber laser welding under low vacuum. J Mater Process Technol 276:116385. https://doi.org/10.1016/j.jmatprotec.2019.116385CrossRef

18.

Tan WD, Bailey NS, Shin YC (2013) Investigation of keyhole plume and molten pool based on a three-dimensional dynamic model with sharp interface formulation. J Phys D Appl Phys 46:055501. https://doi.org/10.1088/0022-3727/46/5/055501CrossRef

19.

Zhang C, Yu Y, Chen C, Zeng XY, Gao M (2020) Suppressing porosity of a laser keyhole welded Al-6Mg alloy via beam oscillation. J Mater Process Technol 278:116382. https://doi.org/10.1016/j.jmatprotec.2019.116382CrossRef

20.

Zhao YQ, Zhou XD, Liu T, Kang Y, Zhan XH (2020) Investigate on the porosity morphology and formation mechanism in laser-MIG hybrid welded joint for 5A06 aluminum alloy with Y-shaped groove. J Manuf Process 57:847–856. https://doi.org/10.1016/j.jmapro.2020.07.044CrossRef

21.

Chen D, Zhan XH, Liu T, Zhao YQ, Qi N, Sun LL (2021) Effect of porosity morphology and elements characteristics on mechanical property in T-joints during dual laser-beam bilateral synchronous welding of 2060/2099 Al-Li alloys. Opt Laser Technol 140:107019. https://doi.org/10.1016/j.optlastec.2021.107019CrossRef

22.

Ke WC, Bu XZ, Oliveira JP, Xu WG, Wang ZM, Zeng Z (2021) Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy. Opt Laser Technol 133:106540. https://doi.org/10.1016/j.optlastec.2020.106540CrossRef

23.

Huang LJ, Hua XM, Wu DS, Li F (2018) Numerical study of keyhole instability and porosity formation mechanism in laser welding of aluminum alloy and steel. J Mater Process Technol 252:421–431. https://doi.org/10.1016/j.jmatprotec.2017.10.011CrossRef

24.

Huang LJ, Liu P, Zhu S, Hua XM, Dong SM (2020) Experimental research on formation mechanism of porosity in magnetic field assisted laser welding of steel. J Manuf Process 50:596–602. https://doi.org/10.1016/j.jmapro.2020.01.007CrossRef

25.

Panwisawas C, Perumal B, Ward RM, Turner N, Turner RP, Brooks JW, Basoalto HC (2017) Keyhole formation and thermal fluid flow-induced porosity during laser fusion welding in titanium alloys: experimental and modelling. Acta Mater 126:251–263. https://doi.org/10.1016/j.actamat.2016.12.062CrossRef

26.

Zhang F (2017) Study on the mechanism of porosity formation and laser welding technology of commercial pure titanium TA2. (Doctoral dissertation, Jiangsu University of Science and Technology). https://kns.cnki.net/KCMS/detail/detail.aspx?dbname=CMFD201801&filename=1017854920.nh. Accessed Oct 2021

Titel: Study on the distribution, element characteristics, and formation mechanism of porosity during laser welding for Ti-6Al-4V bottom-locking joint
verfasst von: Xufeng Kang
Tingyan Yan
Leilei Wang
Qiyu Gao
Xiaohong Zhan
Publikationsdatum: 04.11.2022
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 7-8/2022
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-022-10302-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7-8/2022

Investigation on friction characteristics of micro double cup extrusion assisted by different ultrasonic vibration modes

Modeling machining of aluminum honeycomb structure

Automated quality control inspection of geometric tip defects in medical needle manufacturing

In-process belt-image-based material removal rate monitoring for abrasive belt grinding using CatBoost algorithm

Mechanism of dual-direction vibration-assisted (DVA) micro-milling in surface formation considering the tool life-lengthening effect on the Ti6Al4V: design and experiment

A model for material removal of robot-assisted blade polishing using abrasive cloth wheel

Premium Partner

Marktübersichten