nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

27.08.2020 | ORIGINAL ARTICLE

Surface quality measurement by contact and laser methods on thermally modified spruce wood after plain milling

verfasst von: Fatemeh Razaei, Milan Gaff, Anil Kumar Sethy, Peter Niemz, Gourav Kamboj, Gianluca Ditommaso, Roberto Corleto, Sumanta Das, Miroslav Gašparík

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 5-6/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The accuracy and reliability of a measuring device is crucial to determine the quality of wood surface. This paper compares the surface quality of thermally modified spruce wood measured by two different methods. Spruce wood specimens were thermally modified at different temperatures (160, 180, and 210 °C) and then milled with a single-spindle milling machine operated at different combinations of processing parameters (cutting speed, rake angle, and feed rate). Surface quality (surface roughness and surface waviness) of the specimens were measured by laser as well as contact method. Higher values of surface roughness and waviness were obtained by the laser method compared with the contact method. Average surface roughness was 31% higher, while average waviness was 35% higher in laser method as compared with the contact method. Based on the surface quality obtained by laser method and energy consumption during milling, the optimum combination of parameters for milling of thermally modified spruce wood was ascertained. The best surface quality with lower energy consumption during machining was obtained in spruce wood thermally modified at 210 °C and processed at a cutting speed of 20 m/s, rake angel of 20°, and a feed rate of 4 m/min.

Vorheriger Artikel Milling performance of titanium alloy based on short electric arc machining with direct current power source

Nächster Artikel Determination of pressurizing rate during hot gas forming with integrated heat treatment of Al–Cu–Li alloy: deformation and strengthening behaviors

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Kilic M, Hiziroglu S, Burdurlu E (2006) Effect of machining on surface roughness of wood. Build Environ 41:1074–1078. https://doi.org/10.1016/j.buildenv.2005.05.008CrossRef

Jokerst RW, Steward HA (1976) Knife-versus abrasive planed wood: quality of adhesive bonds. Wood Fiber Sci 8(2):107–113

Kamke FA, Lee JN (2007) Adhesive penetration in wood-a review. Wood Fiber Sci 39(2):205–220

Singh AP, Anderson CR, Warnes JM, Matsumura J (2002) The effect of planning on the microscopic structure of Pinus radiata wood cells in relation to penetration of PVA glue. Holz Roh Werkst 60(5):333–341. https://doi.org/10.1007/s00107-002-0321-1CrossRef

Neese JL, Reeb JE (2004) Funck JW (2004) Relating traditional Ra measures to glue bond quality in plywood. For Prod J 54:67–73

Aydin I (2004) Activation of wood surfaces for glue bonds by mechanical pre-treatment and its effects on some properties of veneer surfaces and plywood panels. Appl Surf Sci 233:268–274. https://doi.org/10.1016/j.apsusc.2004.03.230CrossRef

Hernandez RE, Bustos C, Fortin Y, Beaulieu J (2001) Wood machining properties of white spruce from plantation forests. For Prod J 51(6):82

Cool J, Hernández RE (2016) Impact of three alternative surfacing processes on weathering performance of an exterior water-based coating. Wood Fiber Sci 48(1):43–53

Ozturk B, Kara F (2020) Calculation and estimation of surface roughness and energy consumption in milling of 6061 alloy. Adv Mater Sci Eng:12. https://doi.org/10.1155/2020/5687951

10.

Kara F (2018) Optimization of surface roughness in finish milling of AISI P20+ S plastic-mold steel. Mater Technol 52:195–200. https://doi.org/10.17222/mit.2017.088CrossRef

11.

Lundberg IAS, Porankiewicz B (1995) Studies of non-contact methods for roughness measurements on wood surfaces. Holz Roh Werkst 53:309–314. https://doi.org/10.1007/s001070050097CrossRef

12.

Anon (2011) Standard test methods for conducting machining tests of wood and wood-base materials. ASTM International ASTM, West Conshohocken, pp D1666–D1611

13.

Öhman M, Grubîi V, Sandberg D, Ekevad M (2016) Moistening of the wood surface before planning for improved surface quality. Wood Mater Sci Eng 11(3):156–163. https://doi.org/10.1080/17480272.2016.1166395CrossRef

14.

Sandak J, Negri M (2005) Wood surface roughness – what is it? Trees and Timber Research Institute, Ivalsa/Cnr. Available at: https://www.researchgate.net/profile/Jakub_Sandak/publication/267805159_Wood_surface_roughness_-_what_is_it/links/54bbec430cf253b50e2d1366.pdf Accessed 8 May 2020.

15.

Islam N, Parkin RM, Jackson MR, Kesy Z (2011) Development of a novel profile measurement system for actively planed surfaces. Measurement 44(2):466–477. https://doi.org/10.1016/j.measurement.2010.11.005CrossRef

16.

Kılıç M (2015) Effects of machining methods on the surface roughness values of Pinus nigra Arnold wood. BioResources 10(3):5554–5562. https://doi.org/10.15376/BIORES.10.3.5554-5562CrossRef

17.

Mothe F (1987) Testing of a roughness-meter for assessment of wood surfaces [roughness of wood surface, stylus, roughness parameters, visual and tactile tests]. Ann Sci For (France)

18.

Sandak J, Tanaka C (2003) Evaluation of surface smoothness by laser displacement sensor 1: Effect of wood species. J Wood Sci 49(4):305–311. https://doi.org/10.1007/s10086-002-0486-6CrossRef

19.

Faust TD (1987) Real time measurement of veneer surface roughness by image analysis. Forest Prod J 37(6):34–40

20.

Lemaster RL (1997) Real time measurement of veneer surface roughness by image analysis. In: Proceedings of the National Particleboard Association sanding and sawing seminar, pp 33–42

21.

Costes JP, Larricq P (2002) Towards high cutting speed in wood milling. Ann For Sci 59(8):857–865. https://doi.org/10.1051/forest:2002084CrossRef

22.

Kubs J, Gaff M, Barcík Š (2016) Factors affecting the consumption of energy during the milling of thermally modified and unmodified beech wood. BioResource 11(1):736–747. https://doi.org/10.15376/biores.11.1.736-747CrossRef

23.

Axelsson BO, Lundberg ÅS, Grönlund JA (1993) Studies of the main cutting force at and near a cutting edge. Eur J Wood Wood Prod 51(2):43–48. https://doi.org/10.1007/BF02615376CrossRef

24.

Kminiak R, Gaff M (2015) Roughness of surface created by transversal sawing of spruce, beech, and oak wood. BioResources 10(2):2873–2887. https://doi.org/10.15376/BIORES.10.2.2873-2887CrossRef

25.

Davim JP (ed) (2013) Wood machining. John Wiley & Sons, New York

26.

Esteves B, Pereira HM (2009) Wood modification by heat treatment: a review. BioResources. 4:370–404

27.

Ispas M, Gurau L, Campean M, Hacibektasoglu M, Racasan S (2016) Milling of heat-treated beech wood (Fagus sylvatica L.) and analysis of surface quality. BioResources. 114:9095–9111. https://doi.org/10.15376/biores.11.4.9095-9111CrossRef

28.

Kubš J, Gaff M, Barcík Š (2016) Factors affecting the consumption of energy during the milling of thermally modified and unmodified beech wood. BioResources. 11(1):736–747. https://doi.org/10.15376/biores.11.1.736-747CrossRef

29.

Kocman K, Prokop J (2001) Technologie obrábění (Technology of Machining)0.1. ed., CERM, Brno, Czech Republic (in Czech). http://projects.bre.co.uk/ecotan/pdf/Heat_treatment_processes_Andreas_Rapp%20.pdf

30.

Barcík Š, Gašparík M (2014) Effect of tool and milling parameters on the size distribution of splinters of planed native and thermally modified beech wood. BioResources 9(1):1346–1360. https://doi.org/10.15376/biores.9.1.1346-1360CrossRef

31.

ISO 4287 (1997) Geometrical product specifications (GPS)- Surface texture: Profile method -- Terms, definitions, and surface texture parameters. International Organization for Standardization, Geneva

32.

ISO 4288 (1996) Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture. International Organization for Standardization, Geneva

33.

Gašparík M, Gaff M (2013) Changes in temperature and moisture content in beech wood plasticized by microwave heating. BioResources. 8(3):3372–3384. https://doi.org/10.15376/biores.8.3.3372-3384CrossRef

34.

Sarikaya M, Gullu A (2014) Taguchi design and response surface methodology based analysis of machining parameters in CNC turning under MQL. J Clean Prod 65:604–616. https://doi.org/10.1016/j.jclepro.2013.08.040CrossRef

35.

Sütcü A, Karagöz Ü (2012) Effect of machining parameters on surface quality after face milling of MDF. Wood Res 57:231–240

36.

Kvietková M, Gaff M, Gašparík M, Kaplan L, Barcík Š (2015) Surface quality of milled birch wood after thermal treatment at various temperatures. Bioresources 10(4):6512–6521. https://doi.org/10.15376/biores.10.4.6512-6521CrossRef

37.

Nasir V, Cool J (2019) Optimal power consumption and surface quality in the circular sawing process of Douglas-fir wood. Eur J Wood Wood Prod 77:609–617. https://doi.org/10.1007/s00107-019-01412-zCrossRef

38.

Günay M, Aslan E, Korkut I, Seker U (2004) Investigation of the effect of rake angle on main cutting force. Int J Mach Tools Manuf 44(9):953–959. https://doi.org/10.1016/j.ijmachtools.2004.01.015CrossRef

39.

Kvietková M, Gaff M, Gašparík M, Kminiak R, Kriš A (2015) Effect of number of saw blade teeth on noise level and wear of blade edges during cutting of wood article. Bioresources 10(1):1657–1666. https://doi.org/10.15376/biores.10.1.1657-1666CrossRef

40.

Suresh R, Basavarajappa S, Gaitonde VN, Samuel GL (2012) Machinability investigations on hardened AISI 4340 steel using coated carbide insert. Int J Refract Met Hard Mater 33:75–86. https://doi.org/10.1016/j.ijrmhm.2012.02.019CrossRef

41.

Davim JP, Clemente VC, Silva S (2009) Surface roughness aspects in milling MDF (medium density fiberboard). Int J Adv Manuf Technol 40:49–55. https://doi.org/10.1007/s00170-007-1318-zCrossRef

42.

De Deus PR, Alves MCS, Vieira FHA (2015) The quality of MDF workpieces machined in CNC milling machine in cutting speeds, feed rate, and depth of cut. Meccanica 50:2899–2906. https://doi.org/10.1007/s11012-015-0187-zCrossRef

43.

Barcík Š, Pivolusková E, Kminiak R, Wieloch G (2009) The influence of cutting speed and feed speed on surface quality at plane milling of poplar wood. Wood Res 54:109–115

44.

Gunduz G, Korkut S, Korkut DS (2008) The effects of heat treatment on physical and technological properties and surface roughness of Camiyani Black Pine (Pinus nigra Arn. subsp. pallasiana var. pallasiana) wood. Bioresour Technol 99(7):2275–2280. https://doi.org/10.1016/j.biortech.2007.05.015CrossRef

45.

Korkut S, Akgul M, Dundar T (2008) The effects of heat treatment on some technological properties of Scots pine (Pinus sylvestris L.) wood. Bioresour Technol 99(6):1861–1868. https://doi.org/10.1016/j.biortech.2007.03.038CrossRef

46.

Gaff M, Kačik F, Dick S, Turčani M, Niemz P, Hanzlik P (2019) The effect of chemical changes during thermal modification of European oak and Norway spruce on elasticity properties. Compos Struct 220:529–538. https://doi.org/10.1016/j.compstruct.2019.04.034CrossRef

47.

Fengel D, Wegener G (1989) Wood: chemistry, ultrastructure, reactions. Walter de Gruyter, Berlin

48.

Dashti H, Tarmian A, Faezipour M, Hejazi S, Shahverdi M (2012) Effect of pre-steaming on mass transfer properties of fire wood (Picea abies L.); A gymnosperm species with torus margo pit membrane. BioResources 7(2):1907–1918. https://doi.org/10.15376/biores.7.2.1907-1918CrossRef

Titel: Surface quality measurement by contact and laser methods on thermally modified spruce wood after plain milling
verfasst von: Fatemeh Razaei
Milan Gaff
Anil Kumar Sethy
Peter Niemz
Gourav Kamboj
Gianluca Ditommaso
Roberto Corleto
Sumanta Das
Miroslav Gašparík
Publikationsdatum: 27.08.2020
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 5-6/2020
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-020-05983-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5-6/2020

Stability analysis of 2-DOF milling dynamics for simultaneously varying tooth pitch and spindle speed with helix angle effect

A new tool path with point contact and its effect on incremental sheet forming process

A digital twin-driven production management system for production workshop

The effect of scan path on thermal gradient during selective laser melting

Residual stress and distortion modeling on aeronautical aluminum alloy parts for machining sequence optimization

Formability analysis of hot-rolled dual-phase steel during the multistage stamping process of wheel disc

Premium Partner

Marktübersichten