nach oben

Polymer Bulletin

Erschienen in:

08.11.2018 | Original Paper

Synthesis of unsaturated polyester resin from waste cellulose and polyethylene terephthalate

verfasst von: R. J. Lozano-Escárcega, M. G. Sánchez-Anguiano, Thelma Serrano, Jonathan Y. Chen, Idalia Gómez

Erschienen in: Polymer Bulletin | Ausgabe 8/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Unsaturated polyester resin (UPR_c) was synthesized from maleic anhydride (MA) and products of glycolysis. Oligo-polyethylene terephthalate (OPET) and oligo-cellulose (OC) were obtained by depolymerization of polyethylene terephthalate (PET) waste and paper waste, respectively, both with triethylene glycol in the presence of a catalyst. OC and OPET glycolyzed product and UPR_c were characterized by gel permeation chromatography, X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry and nuclear magnetic resonance (¹H-RMN, ¹³C-RMN, HSQC). Measurements showed that the initial morphological integrity of OC changed due to incorporation of semicrystalline OPET in ploycondensation with MA. Results reflect the enhanced hydrophobicity and thermal stability of the cellulose as a consequence of esterification.

Vorheriger Artikel New fluorinated copoly(pyridine ether imide)s derived from 4,4′-oxydianiline, pyromellitic dianhydride and 4-(4-trifluoromethylphenyl)-2,6-bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]pyridine

Nächster Artikel Amidoximation of cross-linked polyacrylonitrile fiber and its highly selective gallium recovery from Bayer liquor

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Langer E, Waskiewicz S, Lenartowicz M, Bortel K (2015) Application of waste poly(ethylene terephthalate) in the synthesis of new oligomeric plasticizers. Polym Degrad Stab 119:105–112. https://doi.org/10.1016/j.polymdegradstab.2015.04.031 CrossRef

Hansen SM, Sargeant PB (2000) Fibers, polyester. In: Kirk-Othmer Encyclopedia of chemical technology. https://doi.org/10.1002/0471238961.1615122508011419.a01

Dehghani A, Madadi S, Al-maadeed M, Hassan A, Uzir M (2013) Mechanical and thermal properties of date palm leaf fiber reinforced recycled poly (ethylene terephthalate) composites. Mater Des 52:841–848. https://doi.org/10.1016/j.matdes.2013.06.022 CrossRef

Smithers P (2014) Demand for PET packaging material to reach $60 billion by 2019. https://www.smitherspira.com/news/2014/april/demand-for-pet-packaging-material-in-2019. Accessed 2 Feb 2018

Nishida H (2011) Development of materials and technologies for control of polymer recycling. Polym J 43:435–447. https://doi.org/10.1038/pj.2011.16 CrossRef

Villafuerte E, Sánchez MG, Jiménez VM, Pérez NA, Vázquez S (2013) Degradation of poly (ethylene terephthalate) waste with dimethyl tin distanoxane as a catalyst. J Appl Polym Sci 130(5):3482–3488. https://doi.org/10.1002/app.39361 CrossRef

Johnson KG, Yang LS (2003) Preparation, properties and applications of unsaturated polyesters. In: Scheirs J, Long TE (eds) Modern polyesters: chemistry and technology of polyesters and copolyesters. Wiley, New York, pp 698–713. https://doi.org/10.1002/0470090685.ch21 CrossRef

Davis J (2016) Unsaturated Polyester Resin (UPR) market size $12.8bn by 2022: Global Market Insights Inc. Global Market Insights Inc. https://globenewswire.com/news. Accessed 2 Feb 2018

Borjesson M, Westman G (2015) Crystalline nanocellulose-preparation, modification and properties. In: Börjesson M, Westman G (eds) Cellulose—fundamental aspects and current trends. InTech, London, pp 159–191. https://doi.org/10.5772/61899 CrossRef

10.

Varshney VK, Naithani S (2011) Chemical functionalization of cellulose derived from nonconventional sources. In: Kalia S, Kaith B, Kaur I (eds) Cellulose fibers: bio- and nano-polymer composites. Springer, Berlin, pp 43–60. https://doi.org/10.1007/978-3-642-17370-7_2 CrossRef

11.

French A, Bertoniere N, Malcolm R, Chanzy H, Gray D, Hattori K, Glasser W (2003) Cellulose. In: Kirk-Othmer encyclopedia of chemical technology, vol 5. Wiley, pp 360–394. http://onlinelibrary.wiley.com/doi/10.1002/0471238961.0305121206180514.a01.pub2/pdf

12.

Granström M (2009) Cellulose derivatives: synthesis, properties and applications. Faculty of Science of the University of Helsinki. Academic dissertation

13.

Mishra D, Kumar V (2010) Eco-economical polyurethane wood adhesives from cellulosic waste: synthesis, characterization and adhesion study. Int J Adhes Adhes 30:47–54. https://doi.org/10.1016/j.ijadhadh.2009.08.003 CrossRef

14.

Yabushita M (2016) Hydrolysis of cellulose to glucose using carbon catalysts. In: A study on catalytic conversion of non-food biomass into chemicals, pp 43–75. https://doi.org/10.1007/978-981-10-0332-5_2

15.

Dussan KJ, Silva DDV, Moraes EJC, Arruda PV, Felipe MGA (2014) Dilute-acid hydrolysis of cellulose to glucose from sugarcane bagasse. Chem Eng Trans 38:433–438. https://doi.org/10.3303/CET1438073 CrossRef

16.

Shen D, Xiao R, Gu S, Zhang H (2013) The overview of thermal decomposition of cellulose in lignocellulosic biomass. In: Shen D, Xiao R, Gu S, Zhang H (eds) Cellulose-biomass conversion. InTech, London, pp 193–226. https://doi.org/10.5772/51883 CrossRef

17.

Johansson EE (2003) Free radical mediated cellulose degradation. Royal Institute of Technology, Department of Chemistry, Nuclear Chemistry, Stockholm. Doctoral Thesis

18.

Robeson LM (2002) Perspectives in polymer blend technology. In: Utracki LA (ed) Polymer blends handbook. Springer, Dordrecht, pp 1167–1194. https://doi.org/10.1007/0-306-48244-4_17 CrossRef

19.

Mitra B (2014) Environment friendly composite materials: biocomposites and green composites. Def Sci J 64(3):244–261. https://doi.org/10.14429/dsj.64.7323 CrossRef

20.

Islam M, Alam M, Zoccola M (2013) Review on modification of nanocellulose for application in composites. IJIRSET 2(10):5444–5451

21.

Gallego K, López B, Gartner C (2006) Study of blends from recycled polymer for properties improvement. Revista Facultad de Ingeniería Universidad de Antioquia 37:59–70

22.

Shah H, Srinivasulu B, Shit SC (2013) Influence of banana fibre chemical modification on the mechanical and morphological properties of woven banana fabric/unsaturated polyester resin composites. Polym Renew Resour 4(2):61–84

23.

Lu Z (2003) Chemical coupling in wood-polymer composites. LSU Doctoral Dissertations. http://digitalcommons.lsu.edu/gradschool_dissertations/3722. Accessed 2 Feb 2018

24.

Nanayakkara S, Patti A, Saito K (2014) Chemical depolymerization of lignin involving the redistribution mechanism with phenols and repolymerization of depolymerized products. Green Chem 16:1897–1903. https://doi.org/10.1039/c3gc41708e CrossRef

25.

Chen L, Zhu JY, Baez C, Kitinb P, Elderc T (2016) Highly thermal-stable and functional cellulosenanocrystals and nanofibrils produced using fully recyclable organic acids. Green Chem 18:3835–3843. https://doi.org/10.1039/c6gc00687f CrossRef

26.

Mohebby B, Moghadam P, Ghotbifar A, Kazemi S (2011) Influence of maleic-anhydride-polypropylene (MAPP) on wettability of polypropylene/wood flour/glass fiber hybrid composites. J Agric Sci Technol 13:877–884

27.

Brown S (2002) Reactive compatibilization of polymer blends. In: Utracki LA (ed) Polymer blends handbook. Springer, Dordrecht, pp 339–414. https://doi.org/10.1007/0-306-48244-4_17 CrossRef

28.

Toyama K, Soyama M, Tanaka S, Iji M (2015) Development of cardanol-bonded cellulose thermoplastics: high productivity achieved in two-step heterogeneous process. Cellulose 22:1625–1639. https://doi.org/10.1007/s10570-015-0601-7 CrossRef

29.

Rowland SP (1978) Hydroxyl reactivity and availability in cellulose. USDA Agricultural Research Service Southern Regional Laboratory, New Orleans, LA. ISBN 0-12-599750-7

30.

Tallon M, Liu X (2016) Industrially significant copolymers containing maleic anhydride. In: Musa OM (ed) Handbook of maleic anhydride based materials, vol PIII(5). Springer, Cham, pp 251–310. https://doi.org/10.1007/978-3-319-29454-4 CrossRef

31.

Reddy A, Reddy G, Jayaramudu J, Sudhakar K, Manjula B, Ray S, Sadiku E (2015) Polyethylene terephthalate-based blends: natural rubber and synthetic rubber. In: Visakh PM, Liang M (eds) Poly(ethylene terephthalate) based blends, composites and nanocomposites. Elsevier, Amsterdam, pp 75–98. https://doi.org/10.1016/b978-0-323-31306-3.00005-1 CrossRef

32.

Bigan M, Bigot J, Mutel B, Coqueret X (2008) Grafting of copolymer styrene maleic anhydride on poly(ethylene terephthalate) film by chemical reaction and by plasma method optimization of the grafting reaction using experimental design. Appl Surf Sci 254:2300–2308. https://doi.org/10.1016/j.apsusc.2007.09.038 CrossRef

33.

Donegan M, Milosavljevic V, Dowling D (2013) Activation of PET using an RF atmospheric plasma system. Plasma Chem Plasma Process 33:941–957. https://doi.org/10.1007/s11090-013-9474-4 CrossRef

34.

Schüth F, Rinaldi R, Meine N, Käldström M, Hilgert J, Kaufman MD (2014) Mechanocatalytic depolymerization of cellulose and raw biomass and downstream processing of the products. Catal Today 234:24–30. https://doi.org/10.1016/j.cattod.2014.02.019 CrossRef

35.

Samuel R, Fostona M, Jianga N, Allisona L, Ragauskasa A (2011) Structural changes in switchgrass lignin and hemicelluloses during pretreatments by NMR analysis. Polym Degrad Stab 96:2002–2009. https://doi.org/10.1016/j.polymdegradstab.2011.08.015 CrossRef

36.

Mosier N, Sarikaya A, Ladisch C, Ladisch M (2001) Characterization of dicarboxylic acids for cellulose hydrolysis. Biotechnol Prog 17:474–480. https://doi.org/10.1021/bp010028u CrossRefPubMed

37.

Xu J, Jiang J, Dai W, Xu Y (2012) Liquefaction of sawdust in hot compressed ethanol for the production of bio-oils. Process Saf Environ Prot 90:333–338. https://doi.org/10.1016/j.psep.2012.01.001 CrossRef

38.

Carvalho R (2015) Cork liquefaction: improvement of the process and its application on adhesives formulation. Thesis

39.

Braun B, Dorgan J (2009) Single-step method for the isolation and surface functionalization of cellulosic nanowhiskers. Biomacromolecules 10:334–341. https://doi.org/10.1021/bm8011117 CrossRefPubMed

40.

Qiu X, Hu S (2013) “Smart” materials based on cellulose: a review of the preparations, properties, and applications. Materials 6:738–781. https://doi.org/10.3390/ma6030738 CrossRefPubMedPubMedCentral

41.

Pönni R, Vuorinen T, Kontturi E (2012) Proposed nano-scale coalescence of cellulose in chemical pulp fibers during technical treatments. Microfibrillar Aggreg Rev BioResour 7(4):6077–6108. https://doi.org/10.15376/biores.7.4.6077-6108 CrossRef

42.

Medronho B, Romano A, Graca M, Stigsson L, Lindman B (2012) Rationalizing cellulose (in)solubility: reviewing basic physicochemical aspects and role of hydrophobic interactions. Cellulose 19:581–587. https://doi.org/10.1007/s10570-011-9644-6 CrossRef

43.

Segal L, Creely JJ, Martin AE, Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29:786–794. https://doi.org/10.1177/004051755902901003 CrossRef

44.

French A, Santiago M (2013) Cellulose polymorphy, crystallite size, and the Segal Crystallinity Index. Cellulose 20:583–588. https://doi.org/10.1007/s10570-012-9833-y CrossRef

45.

Ioelovich MY, Veveris GP (1987) Determination of cellulose crystallinity by X-ray diffraction method. J Wood Chem 5:72–80. http://www.tandfonline.com/toc/lwct20/5/4

46.

Jiang L, Zheng A, Zhao Z, He F, Li H, Wu N (2016) The comparison of obtaining fermentable sugars from cellulose by enzymatic hydrolysis and fast pyrolysis. Biores Technol 200:8–13. https://doi.org/10.1016/j.biortech.2015.09.096 CrossRef

47.

Kostag M, Liebert T, Heinze T (2014) Acetone-based cellulose solvent. Macromol Rapid Commun 35(16):1419–1422. https://doi.org/10.1002/marc.201400211 CrossRefPubMed

48.

Moulthrop J, Swatloski R, Moyna G, Rogers R (2005) High-resolution 13C NMR studies of cellulose and cellulose oligomers in ionic liquid solutions. Chem Commun 12:1557–1559. https://doi.org/10.1039/b417745b CrossRef

49.

Klernrn D, Heinze T, Philipp B, Wagenknecht W (1997) New approaches to advanced polymers by selective cellulose functionalization. Acta Polym 48:277–297. https://doi.org/10.1002/actp.1997.010480801 CrossRef

50.

Wen X, Wang H, Wei Y, Wang X, Liu C (2017) Preparation and characterization of cellulose laurate ester by catalyzed transesterification. Carbohyd Polym 168:247–254. https://doi.org/10.1016/j.carbpol.2017.03.074 CrossRef

51.

Khokhlova E, Kachala V, Ananikov V (2012) The first molecular level monitoring of carbohydrate conversion to 5-hydroxymethylfurfural in ionic liquids. B2O3—an efficient dual-function metal-free promoter for environmentally benign applications. ChemSusChem 5:783–789. https://doi.org/10.1002/cssc.201100670 CrossRefPubMed

52.

Kono H, Hashimoto H, Shimizu Y (2015) NMR characterization of cellulose acetate: chemical shift assignments, substituent effects, and chemical shift additivity. Carbohyd Polym 118:91–100. https://doi.org/10.1016/j.carbpol.2014.11.004 CrossRef

53.

Pan H, Hse CY, Shupe TF (2009) Wood liquefaction and its application to novolac resin. In: Proceedings of advanced biomass science and technology for bio-based products. Chinese Academy of Forestry Publication, Beijing, pp 39–50. https://www.fs.usda.gov/treesearch/pubs/33608

54.

Klug H, Alexander L (1955) X-ray diffraction procedures for polycrystalline and amorphous material. J Polymer Sci XVII:84. https://doi.org/10.1002/aic.690020128 CrossRef

55.

Agostini M, Nogueira G, Weska R, Masumi M (2010) Preparation and characterization of insoluble silk fibroin/chitosan blend films. Polymers 2:719–727. https://doi.org/10.3390/polym2040719 CrossRef

56.

Ciolacu D, Ciolacu F, Popa V (2011) Amorphous cellulose—structure and characterization. Cellulose Chem Technol 45(1–2):13–21

57.

Xu L, Lu X, Cheng X (2015) Preparation of modified cotton cellulose in ionic liquid and its adsorption of Cu(II) and Ni(II) from aqueous solutions. RSC Adv 5:79022–79030. https://doi.org/10.1039/c5ra08265j CrossRef

58.

Liu C, Sun R, Qin M, Zhang A, Ren J, Xu F, Ye J, Wu S (2007) Chemical modification of ultrasound-pretreated sugarcane bagasse with maleic anhydride. Ind Crops Prod 26:212–219. https://doi.org/10.1016/j.indcrop.2007.03.007 CrossRef

59.

Bikales N, Segal L (1971) Cellulose and cellulose derivatives. High Polymers V:36

60.

Zhang Y, Li H, Li X, Gibril M, Yu M (2014) Chemical modification of cellulose by in situ reactive extrusion in ionic liquid. Carbohyd Polym 99:126–131. https://doi.org/10.1016/j.carbpol.2013.07.084 CrossRef

61.

Chang S, Chang H (2001) Comparisons of the photostability of esterifed wood. Polym Degrad Stab 71:261–266. https://doi.org/10.1016/S0141-3910(00)00171-3 CrossRef

62.

Ghaemy M, Behzadi F (2002) Unsaturated polyester from glycolized PET recycled from postconsumer soft-drink bottles. Iran Polym J 1(2):77–83

63.

Marinković A, Radoman T, Džunuzović E, Džunuzović J, Spasojević P, Isailović B, Bugarski B (2013) Mechanical properties of composites based on unsaturated polyester resins obtained by chemical recycling of poly (ethylene terephthalate). Hem Ind 67(6):913–922. https://doi.org/10.2298/HEMIND130930077M CrossRef

64.

Zahedi A, Rafizadehb M, Ghafarian S (2009) Unsaturated polyester resin via chemical recycling of off-grade poly(ethylene terephthalate). Polym Int 58:1084–1091. https://doi.org/10.1002/pi.2637 CrossRef

65.

Hamdaoui L, Moussaouiti M, Gmouh S (2016) Homogeneous esterification of cellulose in the mixture N-butylpyridinium chloride/dimethylsulfoxide. Int J Polymer Sci 2016, ID 1756971. https://doi.org/10.1155/2016/1756971

66.

Birnin-Yauri A, Ibrahim N, Zainuddin N, Abdan K, Then Y, Chieng B (2017) Effect of maleic anhydride-modified poly(lactic acid) on the properties of its hybrid fiber biocomposites. Polymers 9:165. https://doi.org/10.3390/polym9050165 CrossRefPubMedCentral

67.

Semsarilar M, Tom J, Ladmiral V, Perrier S (2012) Supramolecular hybrids of cellulose and synthetic polymers. Polym. Chem. 3:3266–3275. https://doi.org/10.1039/c2py20385e CrossRef

68.

Huang F (2012) Thermal properties and thermal degradation of cellulose tri-stearate (CTs). Polymers 4:1012–1024. https://doi.org/10.3390/polym4021012 CrossRef

69.

Tahvildari K, Mozafari S, Tarinsun N (2010) Chemical recycling of poly ethylene terphthalat to obtain unsaturated polyester resins. J Appl Chem Res 12:59–68

Titel: Synthesis of unsaturated polyester resin from waste cellulose and polyethylene terephthalate
verfasst von: R. J. Lozano-Escárcega
M. G. Sánchez-Anguiano
Thelma Serrano
Jonathan Y. Chen
Idalia Gómez
Publikationsdatum: 08.11.2018
Verlag: Springer Berlin Heidelberg
Erschienen in: Polymer Bulletin / Ausgabe 8/2019
Print ISSN: 0170-0839
Elektronische ISSN: 1436-2449
DOI: https://doi.org/10.1007/s00289-018-2576-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2019

Synthesis and chemical properties of pyrophosphoric acid-doped polyaniline and copolymers of o-phenylenediamine with aniline and 3,4-ethylenedioxythiophene

Synthesis and properties of organosoluble and thermal stable polyimides from 3,5-diamino-N-(4-(5-(4,5-diphenyl-1H-imidazol-2-yl)furan-2-yl)phenyl)benzamide

Preparation and properties of epoxy-terminated butadiene acrylonitrile rubber-intercalating organic montmorillonite nanocomposites

A novel Lawsonia inermis (Henna)/(hydroxyethylcellulose/polyvinylpyrrolidone) wound dressing hydrogel: radiation synthesis, characterization and biological evaluation

Short silica fibre-reinforced polymethylsilsesquioxane–phenolic interpenetrating networks: exploration for use as ablative thermal protection system in aerospace

Development of quercetin imprinted membranes-based PVDF substrate

Premium Partner

Marktübersichten