nach oben

Journal of Coatings Technology and Research

Erschienen in:

08.06.2018

Synthesis of ZnS–Mn nano-luminescent pigment for ink applications

verfasst von: Fatemeh Esmaeili, Mehdi Ghahari, Mahdi Shafiee Afarani, Atasheh Soleimani

Erschienen in: Journal of Coatings Technology and Research | Ausgabe 6/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In the present study, ZnS–Mn nano-luminescent pigments were synthesized, using co-precipitation method. Polyvinylpyrrolidine (PVP) surface modifier and Mn dopant concentrations were considered as affecting parameters. The luminescent ink was loaded with two different concentrations of pigments. The obtained ink was silk-screened on different types of fabrics mainly treated cotton, cotton and nylon. Structure, microstructure, luminescent properties of nano-pigments, inks and fabrics and also rheological properties of the inks were investigated. The results showed that the ceramic ink prepared with nano-luminescent pigment had high photoluminescence (PL) intensity. Moreover, the optimum concentrations of Mn and PVP for obtaining maximum PL intensity were found as 2 and 5 wt%, respectively. SEM images of fabrics indicated that nanoparticles were loaded, nonuniformly, on the fibers. The treated linen and nylon fabrics showed maximum and minimum PL intensity, respectively, due to ink penetration depth in the fabrics. Furthermore, washing fastness estimated for all fabrics was in the proper range.

Vorheriger Artikel Evaluation of the effect of surface coatings on protection of concrete against sewage-induced degradation based on gray correlation analysis

Nächster Artikel Polydopamine functional reduced graphene oxide for enhanced mechanical and electrical properties of waterborne polyurethane nanocomposites

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Xiying, M, Jingwei, S, Zhangsen, Y, “The Light Emission Properties of ZnS:Mn Nanoparticles.” Thin Solid Films, 519 5043–5045 (2011)CrossRef

Rema Devi, BS, Raveendran, R, Vaidyan, AV, “Synthesis and Characterization of Mn²⁺-Doped ZnS Nanoparticles.” J. Phys., 68 (4) 679–687 (2007)

Yu, II, Isobe, T, Senna, M, “Optical Properties and Characteristics of ZnS Nano-Particles with Homogeneous Mn Distribution.” J. Phys. Chem Solids, 57 (4) 373–379 (1996)CrossRef

Sarkar, R, Tiwary, CS, Kumbhakar, P, Basu, S, Mitra, AK, “Yellow-Orange Light Emission from Mn²⁺-Doped ZnS Nanoparticles.” Phys. E, 40 3115–3120 (2008)CrossRef

Nazerdeylami, S, Saievar-Iranizad, E, Dehghani, Z, Molaei, M, “Synthesis and Photoluminescent and Nonlinear Optical Properties of Manganese Doped ZnS Nanoparticles.” Phys. B, 406 108–111 (2011)CrossRef

Rui, Z, Yingbo, L, Shuqing, S, “Synthesis and Characterization of High-Quality Colloidal Mn²⁺-Doped ZnS Nanoparticles.” Opt. Mater., 34 1788–1794 (2012)CrossRef

Sajan, P, Vinod, R, Junaid Bushiri, M, “High Luminescent Yield from Mn Doped ZnS at Yellow–Orange Region and 367 nm.” J. Lumin., 158 110–115 (2015)CrossRef

Warad, HC, Ghosh, SC, Hemtanon, B, Thanachayanont, C, Dutta, J, “Luminescent Nanoparticles of Mn Doped ZnS Passivated with Sodium Hexametaphosphate.” Sci. Technol. Adv. Mater., 6 296–301 (2005)CrossRef

Manzoor, K, Vadera, SR, Kumar, N, Kutty, TRN, “Synthesis and Photoluminescent Properties of ZnS Nanocrystals Doped With Copper and Halogen.” Mater. Chem. Phys., 82 718–725 (2003)CrossRef

10.

Viswanath, R, Bhojya Naik, HS, Yashavanth Kumar, GS, Prashanth Kumar, PN, “EDTA-Assisted Hydrothermal Synthesis, Characterization and Photoluminescent Properties of Mn²⁺ doped ZnS.” J. Lumin., 153 446–452 (2014)CrossRef

11.

Mohagheghpour, E, Rabiee, M, Moztarzadeh, F, Tahriri, M, Jafarbeglou, M, Bizari, D, Eslami, H, “Controllable Synthesis, Characterization and Optical Properties of ZnS:Mn Nanoparticles as a Novel Biosensor.” Mater. Sci. Eng. C, 29 1842–1848 (2009)CrossRef

12.

Leach, RH, Armstrong, C, Brown, JF, Mackenzie, MJ, Randall, L, Smith, HG, The Printing Ink Manual. Wiley, New York (1999)

13.

Kaur, B, Singh, K, Malik, AK, “14–17 Effect of Ligands on Crystallography, Morphology and Photo-Catalytic Ability of ZnS Nanostructures.” Dyes Pigments, 142 153–160 (2017)CrossRef

14.

Angelo, PD, Farnood, RR, Inkjet Ink Containing Inorganic Doped Semiconductor (ZnS:Mn) Nanoparticle Pigments, Vol. 3. Pulp and Paper Centre, Toronto (2009)

15.

Cha, H, Ahn, S, Choi, KC, “An Inkjet Printing Method: Drop and Synthesis (DAS). Application to the Synthesis of ZnS:Mn Nano-Phosphor with a Pattern.” Curr. Appl. Phys., 10 109–112 (2010)CrossRef

16.

Angelo, PD, Farnood, RR, “Photoluminescent Inkjet Ink Containing ZnS:Mn Nanoparticles as Pigment.” J. Exp. Nanosci., 6 (5) 473–487 (2011)CrossRef

17.

Angelo, PD, Kronfli, R, Farnood, RR, “Synthesis and Inkjet Printing of Aqueous ZnS:Mn Nanoparticles.” J. Lumin., 136 100–108 (2013)CrossRef

18.

Kim, Y, Yoo, H, “Electrical Characterization of Screen-Printed Circuits on the Fabric.” IEEE Trans. Adv. Pack., 33 (1) 196 (2010)CrossRef

19.

Ismail, B, Abaab, M, Rezig, B, “Structural and Electrical Properties of ZnO Films Prepared by Screen Printing Technique.” Thin Solid Films, 383 92–94 (2001)CrossRef

20.

Wu, W, Yang, Sh, Zhang, Sh, Zhang, H, Jiang, Ch, “Fabrication, Characterization and Screen Printing of Conductive Ink based on Carbon@Ag Core-Shell Nanoparticles.” J. Colloid Interface Sci., 427 15 (2013)CrossRef

21.

Paul, G, Torah, R, Beeby, S, Tudor, J, “The Development of Screen Printed Conductive Networks on Textiles for Biopotential Monitoring Applications.” Sens. Actuat. A, 206 35 (2013)CrossRef

22.

Fijan, R, Basile, M, Lapasin, R, Sostar-Turk, S, “Rheological Properties of Printing Pastes and Their Influence on Quality-Determining Parameters in Screen Printing of Cotton with Reactive Dyes Using Recycled Polysaccharide Thickeners.” Carbohydr. Polym., 78 25–35 (2009)CrossRef

23.

Naeimi, A, Arabi, AM, Shafiee Afarani, M, Gardeshzadeh, AR, “In Situ Synthesis and Electrophoretic Deposition of CNT–ZnS:Mn Luminescent Nanocomposites.” Mater. Electron. J. Mater. Sci., 26 1403 (2014)

24.

Ghosh, G, Kanti Naskar, M, Patra, A, Chatterjee, M, “Synthesis and Characterization of PVP-Encapsulated ZnS Nanoparticles.” Opt. Mater., 28 1047–1053 (2006)CrossRef

25.

Chena, Z, Lib, XX, “Study on the Optical Properties Of Zn_1−xMg_xS (0–0.55) Quantum Dots Prepared by Precipitation Method.” Mater. Sci. Eng., 177 337 (2011)CrossRef

26.

Esra, I, “Rheological Behaviour of Whey Protein Stabilized Emulsions in the Presence of Gum Arabic.” J. Food Eng., 52 273–277 (2002)CrossRef

27.

McClements, DJ, Food Emulsions, Principles, Practices and Techniques. CRC Press, Boca Raton (2005)

28.

Lin, HW, Chang, CP, Hwu, WH, Ger, MD, “The Rheological Behaviors of Screen-Printing Pastes.” J. Mater. Process. Technol., 197 284–291 (2008)CrossRef

29.

Soleimani-Gorgani, A, Ghahari, M, Peymannia’, M, “In Situ Production of Nano-CoAl₂O₄ on a Ceramic Surface by Ink-Jet Printing.” J. Eur. Ceram. Soc., 35 779–786 (2015)CrossRef

30.

Peymannia, M, Soleimani-Gorgani, A, Ghahari, M, Jalili, M, “The Effect of Different Dispersants on the Physical Properties of Nano CoAl2O4 Ceramic Ink-Jet Ink.” Ceram. Int., 41 9115–9121 (2015)CrossRef

Titel: Synthesis of ZnS–Mn nano-luminescent pigment for ink applications
verfasst von: Fatemeh Esmaeili
Mehdi Ghahari
Mahdi Shafiee Afarani
Atasheh Soleimani
Publikationsdatum: 08.06.2018
Verlag: Springer US
Erschienen in: Journal of Coatings Technology and Research / Ausgabe 6/2018
Print ISSN: 1547-0091
Elektronische ISSN: 1935-3804
DOI: https://doi.org/10.1007/s11998-018-0081-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2018

Synthesis and characterization of polyurethane/reduced graphene oxide composite deposited on steel

Diffusion cell investigations into the acidic degradation of organic coatings

Polydopamine functional reduced graphene oxide for enhanced mechanical and electrical properties of waterborne polyurethane nanocomposites

Preparation and properties of waterborne polyurethane modified by stearyl acrylate for water repellents

Preparation of an ionic/nonionic polyurethane-silicone dispersion (PUSD) with a high solid content and low viscosity using complex soft segments

Preparation and characterization of waterborne polyurethane/polyacrylate emulsions containing sulfonate groups

Premium Partner

Marktübersichten