nach oben

Journal of Materials Science

Erschienen in:

27.02.2019 | Energy materials

Tape-casted liquid-tight lithium-conductive membranes for advanced lithium batteries

verfasst von: Victor A. Vizgalov, Anastasia R. Lukovkina, Daniil M. Itkis, Lada V. Yashina

Erschienen in: Journal of Materials Science | Ausgabe 11/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Advanced lithium batteries, including Li–air, Li–sulfur and high-voltage Li-ion systems, attract constantly increasing attention worldwide. Each of these systems have unique problems, yet development of solid electrolyte membrane capable of separating anode and cathode, while being penetrable only for Li⁺, is crucial for all of them. In this paper, we suggest a new recipe combining glass crystallization and tape-casting techniques for thin lithium-conductive membranes preparation. We show that the powders prepared by grinding glass–ceramics and containing residual traces of glassy phase are beneficial ceramic fillers for tape casting. Such fillers enhance sintering and support the preparation of denser membranes. Taking DTA, dilatometry and SEM data into account, we have optimized the sintering procedure enabling fabrication of liquid-tight 10–100-µm-thin membranes with ionic conductivity reaching 0.22 mS cm⁻¹ at 25 °C. Therefore, we consider such permeable membranes as a viable option for Li⁺ ions separator between anode and cathode of advanced lithium batteries.

Vorheriger Artikel Strain-sensitivity conductive MWCNTs composite hydrogel for wearable device and near-infrared photosensor

Nächster Artikel Enhancement of photocurrent in Cu2ZnSnS4 quantum dot-anchored multi-walled carbon nanotube for solar cell application

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Ji X, Nazar LF (2010) Advances in Li–S batteries. J Mater Chem 20:9821–9826. https://doi.org/10.1039/b925751a CrossRef

Goodenough JB, Kim Y (2010) Challenges for rechargeable Li batteries†. Chem Mater 22:587–603. https://doi.org/10.1021/cm901452z CrossRef

Lu Y-C, Gallant BM, Kwabi DG et al (2013) Lithium–oxygen batteries: bridging mechanistic understanding and battery performance. Energy Environ Sci 6:19–750. https://doi.org/10.1039/c3ee23966g

Yin YX, Xin S, Guo YG, Wan LJ (2013) Lithium-sulfur batteries: electrochemistry, materials, and prospects. Angew Chem Int Ed 52:13186–13200. https://doi.org/10.1002/anie.201304762 CrossRef

Luntz AC, McCloskey BD (2014) Nonaqueous Li–Air batteries: a status report. Chem Rev 114:11721–11750. https://doi.org/10.1021/cr500054y CrossRef

Shao Y, Ding F, Xiao J et al (2013) Making Li-Air batteries rechargeable: material challenges. Adv Func Mater 23:987–1004. https://doi.org/10.1002/adfm.201200688 CrossRef

Bachman JC, Muy S, Grimaud A et al (2016) Inorganic solid-state electrolytes for lithium batteries: mechanisms and properties governing ion conduction. Chem Rev 116:140–162. https://doi.org/10.1021/acs.chemrev.5b00563 CrossRef

Lu Y, Goodenough JB (2011) Rechargeable alkali-ion cathode-flow battery. J Mater Chem 21:10113–10117. https://doi.org/10.1039/c0jm04222f CrossRef

Christensen J, Albertus P, Sanchez-Carrera RS et al (2011) A critical review of Li/Air batteries. J Electrochem Soc 159:R1–R30. https://doi.org/10.1149/2.086202jes CrossRef

10.

Fergus JW (2010) Ceramic and polymeric solid electrolytes for lithium-ion batteries. J Power Sources 195:4554–4569. https://doi.org/10.1016/j.jpowsour.2010.01.076 CrossRef

11.

Kamaya N, Homma K, Yamakawa Y, Hirayama M (2011) A lithium superionic conductor. Nat Mater 10:682–686. https://doi.org/10.1038/nmat3066 CrossRef

12.

Ong SP, Mo Y, Richards WD, Ceder G (2012) First principles investigations of the Li10GeP2S12 superionic conductor and related materials. Meeting abstracts MA2012-02, pp 1193–1193

13.

Knauth P (2009) Inorganic solid Li ion conductors: an overview. Solid State Ion 180:911–916. https://doi.org/10.1016/j.ssi.2009.03.022 CrossRef

14.

Hagman L-O, Kierkegaard P, Karvonen P et al (1968) The crystal structure of NaM2IV(PO₄)₃; MeIV = Ge, Ti, Zr. Acta Chem Scand 22:1822–1832. https://doi.org/10.3891/acta.chem.scand.22-1822 CrossRef

15.

Aono H, Imanaka N, Adachi G-Y (1994) High Li + conducting ceramics. Acc Chem Res 27:265–270. https://doi.org/10.1021/ar00045a002 CrossRef

16.

Cretin M, Fabry P (1999) Comparative study of lithium ion conductors in the system Li1 xAlxA2–xIV (PO₄)₃ with AIV = Ti or Ge and 0 ≤ x≤ 0·7 for use as Li sensitive membranes. J Eur Ceram Soc 19:2931–2940. https://doi.org/10.1016/s0955-2219(99)00055-2 CrossRef

17.

Arbi K, Rojo JM, Sanz J (2007) Lithium mobility in titanium based Nasicon Li1 + xTi2–xAlx(PO₄)₃ and LiTi2–x Zrx(PO₄)₃ materials followed by NMR and impedance spectroscopy. J Eur Ceram Soc 27:4215–4218. https://doi.org/10.1016/j.jeurceramsoc.2007.02.118 CrossRef

18.

Takahashi K, Ohmura J, Im D et al (2012) A super high lithium ion conducting solid electrolyte of grain boundary modified Li1.4Ti1.6 Al0.4(PO₄)₃. J Electrochem Soc 159:A342–A348. https://doi.org/10.1149/2.018204jes CrossRef

19.

Xu X, Wen Z, Wu X et al (2007) Lithium ion-conducting glass-ceramics of Li1. 5Al0. 5Ge1. 5 (PO₄)₃–xLi2O (x = 0.0–0.20) with good electrical and electrochemical properties. J Am Ceram Soc 90:2802–2806CrossRef

20.

Zheng F, Kotobuki M, Song S et al (2018) Review on solid electrolytes for all-solid-state lithium-ion batteries. J Power Sources 389:198–213. https://doi.org/10.1016/j.jpowsour.2018.04.022 CrossRef

21.

Yu X, Bates JB, Jellison GEJ, Hart FX (1997) A stable thin-film lithium electrolyte: lithium phosphorus oxynitride. J Electrochem Soc 144:524–532. https://doi.org/10.1149/1.1837443 CrossRef

22.

Zhang M, Huang Z, Cheng J et al (2013) Solid state lithium ionic conducting thin film Li1.4Al0.4Ge1.6(PO₄)₃ prepared by tape casting. J Alloys Compd 590:147–152. https://doi.org/10.1016/j.jallcom.2013.12.100 CrossRef

23.

Dudney N, Bates J, Zuhr R et al (1992) Sputtering of lithium compounds for preparation of electrolyte thin films. Solid State Ion 53–56:655–661. https://doi.org/10.1016/0167-2738(92)90443-s CrossRef

24.

Bates J, Dudney N, Gruzalski G et al (1992) Electrical properties of amorphous lithium electrolyte thin films. Solid State Ion 53–56:647–654. https://doi.org/10.1016/0167-2738(92)90442-r CrossRef

25.

Kotobuki M, Hoshina K, Isshiki Y, Kanamura K (2011) Preparation of Li1.5Al0.5Ge1.5(PO4)3solid electrolyte by sol–gel method. Phosphorus Res Bull 25:61–63. https://doi.org/10.3363/prb.25.61 CrossRef

26.

Key B, Schroeder DJ, Ingram BJ, Vaughey JT (2012) Solution-based synthesis and characterization of lithium-ion conducting phosphate ceramics for lithium metal batteries. Chem Mater 24:287–293. https://doi.org/10.1021/cm202773d CrossRef

27.

Snijkers F, de Wilde A, Mullens S, Luyten J (2004) Aqueous tape casting of yttria stabilised zirconia using natural product binder. J Eur Ceram Soc 24:1107–1110. https://doi.org/10.1016/s0955-2219(03)00388-1 CrossRef

28.

Moon H, Kim S, Park E et al (2008) Characteristics of SOFC single cells with anode active layer via tape casting and co-firing. Int J Hydrog Energy 33:2826–2833. https://doi.org/10.1016/j.ijhydene.2008.03.024 CrossRef

29.

Song J-H, Park S-I, Lee J-H, Kim H-S (2008) Fabrication characteristics of an anode-supported thin-film electrolyte fabricated by the tape casting method for IT-SOFC. J Mater Process Technol 198:414–418. https://doi.org/10.1016/j.jmatprotec.2007.07.030 CrossRef

30.

Petříček V, Dušek M, Palatinus L (2014) Crystallographic computing system JANA2006: general features. Zeitschrift für Kristallographie—Cryst Mater 229:1–8. https://doi.org/10.1515/zkri-2014-1737 CrossRef

31.

Nečas D, Klapetek P (2012) Gwyddion: an open-source software for SPM data analysis. Open Phys 10:181–188. https://doi.org/10.2478/s11534-011-0096-2

32.

Wang Z, Qian J, Cao J et al (2007) A study of multilayer tape casting method for anode-supported planar type solid oxide fuel cells (SOFCs). J Alloy Compd 437:264–268. https://doi.org/10.1016/j.jallcom.2006.07.110 CrossRef

33.

Liu Z, Wang Y, Li Y (2012) Combinatorial study of ceramic tape-casting slurries. ACS Comb Sci 14:205–210. https://doi.org/10.1021/co200148q CrossRef

34.

Li S-C, Cai J-Y, Lin Z-X (1988) Phase relationships and electrical conductivity of Li 1 + x Ge 2–x Al x P 3 O 12 and Li 1 + x Ge 2–x Cr x P 3 O 12 systems. Solid State Ion 28:1265–1270CrossRef

35.

Leo CJ, Chowdari BVR, Rao GVS, Souquet JL (2002) Lithium conducting glass ceramic with Nasicon structure. Mater Res Bull 37:1419–1430. https://doi.org/10.1016/s0025-5408(02)00793-6 CrossRef

36.

Fu J (1997) Fast Li + ion conducting glass-ceramics in the system Li 2 O-Al 2 O 3–GeO 2–P 2 O 5. Solid State Ion 104:191–194CrossRef

37.

Hartmann P, Leichtweiss T, Busche MR et al (2013) Degradation of NASICON-type materials in contact with lithium metal: formation of mixed conducting interphases (MCI) on solid electrolytes. J Phys Chem C 117:21064–21074. https://doi.org/10.1021/jp4051275 CrossRef

38.

Liu Y, Li C, Li B et al (2018) Germanium thin film protected lithium aluminum germanium phosphate for solid-state li batteries. Adv Energy Mater 8:1702374-1–1702374-7. https://doi.org/10.1002/aenm.201702374

39.

Luo W, Gong Y, Zhu Y et al (2016) Transition from superlithiophobicity to superlithiophilicity of garnet solid-state electrolyte. J Am Chem Soc 138:12258–12262. https://doi.org/10.1021/jacs.6b06777 CrossRef

40.

Tsai C-L, Roddatis V, Chandran CV et al (2016) Li7La3Zr2O12 interface modification for Li dendrite prevention. ACS Appl Mater Interfaces 8:10617–10626. https://doi.org/10.1021/acsami.6b00831 CrossRef

41.

Han X, Gong Y, Fu KK et al (2016) Negating interfacial impedance in garnet-based solid-state Li metal batteries. Nat Mater 16:572–579. https://doi.org/10.1038/nmat4821 CrossRef

42.

Gao Z, Sun H, Fu L et al (2018) Promises, challenges, and recent progress of inorganic solid-state electrolytes for all-solid-state lithium batteries. Adv Mater 30:27–1705702. https://doi.org/10.1002/adma.201705702

43.

Bai L, Xue W, Li Y et al (2018) The interfacial behaviours of all-solid-state lithium ion batteries. Ceram Int 44:1–34. https://doi.org/10.1016/j.ceramint.2018.01.190 CrossRef

44.

Weast RC, Astle MJ (1994) Handbook of data on organic compounds, 3rd edn. CRC Press Inc., Boca Raton

45.

Weast RC, Astle MJ (1985) CRC handbook of data on organic compounds. CRC Press, Boca Raton

Titel: Tape-casted liquid-tight lithium-conductive membranes for advanced lithium batteries
verfasst von: Victor A. Vizgalov
Anastasia R. Lukovkina
Daniil M. Itkis
Lada V. Yashina
Publikationsdatum: 27.02.2019
Verlag: Springer US
Erschienen in: Journal of Materials Science / Ausgabe 11/2019
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-019-03463-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2019

Mechanical properties and pervaporation separation performance of CTAB-modified cage-structured POSS-incorporated PVA membrane

Verwey transition temperature distribution in magnetic nanocomposites containing polydisperse magnetite nanoparticles

Monodispersed dendritic mesoporous silica/carbon nanospheres with enhanced active site accessibility for selective adsorptive desulfurization

Attaching ZrO2 nanoparticles onto the surface of graphene oxide via electrostatic self-assembly for enhanced mechanical and tribological performance of phenolic resin composites

Carbon nanotube-reinforced aluminum matrix composites enhanced by grain refinement and in situ precipitation

Highly elastic and ultrathin nanopaper-based nanocomposites with superior electric and thermal characteristics

Premium Partner

Marktübersichten