nach oben

Journal of Materials Engineering and Performance

Erschienen in:

17.01.2022 | Technical Article

Temperature-Dependent Wear Characteristics of a High-Voltage Low-Current Electric Energy-Treated AISI 1080 Steel

verfasst von: Mousumi Mallick, Biplab Hazra, Swapan Kumar Mitra, Debasish Basak, Bijay Kumar Show, Joydeep Maity

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 5/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The temperature-dependent dry sliding wear behavior against an alumina disk is investigated for a novel high-voltage low-current electric energy-treated AISI 1080 steel in comparison with the conventionally treated (patented-cum-cold drawn) AISI 1080 steel up to a test temperature of 60 °C. The conventionally treated steel is found to suffer from an accentuated wear loss with increasing test temperature. This is attributed to the thermal softening effect together with the breakdown of oxide layer so as to aggravate abrasive wear through microcutting and microplowing mechanism alongside plastic flow of metal. In contrast, in case of high-voltage low-current electric energy-treated AISI 1080 steel, a typical tribo-oxide layer of FeAl₂O₄ is developed at 60 °C. As a result, the surface friction and the surface temperature are brought down to obviate the thermal softening effect. This causes an arrest in wear loss at 60 °C.

Vorheriger Artikel Mechanical Characteristics and Structure of Highly Deformed Zinc

Nächster Artikel Effect of Printing Temperature on Mechanical and Viscoelastic Properties of Ultra-flexible Thermoplastic Polyurethane in Material Extrusion Additive Manufacturing

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

A.R. Subhani, D.K. Mondal, C. Mondal and J. Maity, Attainment of an Exceptionally High Strength in Low-Carbon Steel along with Modest Ductility through a Novel Heat Treatment Route, Philos. Mag. Lett., 2018, 98(6), p 240–251. CrossRef

A.R. Subhani, D.K. Mondal, C. Mondal, H. Roy and J. Maity, Development of a High-Strength Low-Carbon Steel with Reasonable Ductility through Thermal Cycling, J. Mater. Eng. Perform., 2019, 28(4), p 2192–2201. CrossRef

N. Sushanthi and J. Maity, Modification of Grange-Kiefer approach for Determination of Hardenability in Eutectoid Steel, Metall. Mater. Trans. A, 2014, 45(13), p 6360–6371. CrossRef

S. Mishra, A. Mishra, B.K. Show and J. Maity, Simultaneous Enhancement of Ductility and Strength in AISI 1080 Steel Through a Typical Cyclic Heat Treatment, Mater. Sci. Eng. A, 2017, 688, p 262–271. CrossRef

S. Mishra, A. Mishra, B.K. Show and J. Maity, Accelerated Lamellar Disintegration in Eutectoid Steel, Philos. Mag. Lett., 2017, 97(4), p 140–149. CrossRef

M. Mallick, S.K. Mitra, D. Basak, N.K. Roy and J. Maity, A Novel Approach of High-Voltage Low-Current Electric Energy Input to Synthesise Cost-Effective Ultra-Strong Ductile Material, Philos. Mag., 2021, 101(5), p 555–575. CrossRef

E.M. Taleff, C.K. Syn, D.R. Lesuer and O.D. Sherby, Comparison of Mechanical Behavior in Pearlitic and Spheroidized Hypereutectoid Steels, Thermomechanical Processing and Mechanical Properties of Hypereutectoid Steels and Cast Irons, 1997, p 127-142

T.S. Eyre, The Mechanism of Wear, Tribol. Int., 1978, 11, p 91–96. CrossRef

E. Rabinowicz, Tribology II- Video Course Manual, Center for Advanced Engineering Study, Cambridge, MA, 1983, p 1.2-1.3

10.

Y.C. Lin, S.W. Wang and T.M. Chen, A Study on the Wear Behavior of Hardened Medium Carbon Steel, J. Mater. Process. Technol., 2002, 120, p 126–132. CrossRef

11.

T.F.J. Quinn, The Application of X-ray Diffraction Techniques to the Study of Wear, Adv. X-Ray Anal., 1966, 10, p 311–327.

12.

T.F.J. Quinn, An Experimental Study of the Thermal Aspects of Steel, Proc. Inst. Mech. Eng., 1968, 183, p 129–137. CrossRef

13.

T.F.J. Quinn, The Division of Heat and Temperature at Sliding Steel Interfaces and Their Relation to Oxidational Wear, ALSE Trans., 1978, 21(1), p 78–86.

14.

K.H.Z. Gahr, Microstructure and Wear of Materials, Elsevier, Amsterdam, 1987, p 1087

15.

J. Kalousek, D.M. Fegredo and E.E. Lauffer, The Wear Resistance and Worn Metallography of Pearlite, Bainite and Tempered Martensite Rail Steel Microstructures of High Hardness, Wear, 1985, 105(3), p 199–222. CrossRef

16.

Y. Wang and T. Lei, Wear Behavior of Steel 1080 With Different Microstructures During Dry Sliding, Wear, 1996, 194, p 44–53. CrossRef

17.

B. Hazra, S. Bera and B.K. Show, Severe-to-Mild Wear Transition at Higher Temperatures in Al-17Si-5Cu Alloy after Short-Duration Isothermal Heat Treatment, Philos. Mag. Lett., 2018, 98(12), p 556–566. CrossRef

18.

D. Johnson, Assessment of thermal environment of mine refuge chamber, A Technical Report, IHST Project Number 18050, Industrial Hygiene and Safety Technology, Inc., Carrollton, TX 75006, 2008, p 1-25

19.

J.F. Shackelford and W. Alexander, Materials Science and Engineering Handbook, 1, CRC Press, Boca Raton, 2001, p 473

20.

I.R. McColl, R.B. Waterhouse, S.J. Harris and M. Tsujikawa, Lubricated Fretting Wear of High-Strength Eutectoid Steel Rope Wire, Wear, 1995, 185, p 203–212. CrossRef

21.

C.C. Viafara, M.I. Castro, J.M. Velez and A. Toro, Unlubricated Sliding Wear of Pearlitic and Bainitic Steels, Wear, 2005, 259, p 405–411. CrossRef

22.

M.K. Mondal, K. Biswas and J. Maity, A Transient Heat Transfer Model for Assessment of Flash Temperature During Dry Sliding Wear in A Pin-On-Disk Tribometer, Metall. Mater. Trans. A, 2016, 47, p 600–607. CrossRef

23.

K.P. Lijesh and M.M. Khonsari, On The Modeling of Adhesive Wear with Consideration of Loading Sequence, Tribol. Lett., 2018, 66, p 105–116. CrossRef

24.

K.P. Lijesh, M.M. Khonsari and S.V. Kailas, On the Integrated Degradation Coefficient for Adhesive Wear: A Thermodynamic Approach, Wear, 2018, 408, p 138–150. CrossRef

25.

H. Fereidouni, S. Akbarzadeh and M.M. Khonsari, On the Assessment of Variable Loading in Adhesive Wear, Tribol. Int., 2019, 129, p 167–176. CrossRef

26.

E.I. Eazantsev, Industrial Furnaces, MIR Publishers, Moscow, 1977, p 62–109

27.

P. Auerkari, Mechanical and Physical Properties of Engineering Alumina Ceramics, Research Notes, Technical Research Centre of Finland, 1996, p 1-26

28.

H.S. Ray, R. Sridhar, and K.P. Abraham, Extraction of Nonferrous Metals, Affiliated East West Press Pvt. Ltd., 1999, p 20. (ISBN 81-85095-63-9)

29.

H.J.T. Ellingham, Reducibility of Oxides and Sulphides in Metallurgical Processes, J. Soc. Chem. Ind., 1944, 63(5), p 125–133. CrossRef

30.

J. Chen, L. Yu, J. Sun, Y. Li and W. Xue, Synthesis of Hercynite by Reaction Sintering, J. Eur. Ceram. Soc., 2011, 31(3), p 259–263. CrossRef

31.

E.O. Prado, J.F. Dunn, J. Vasconez, D. Castillo and G. Viscor, Partial Pressure of Oxygen in the Human Body: A General Review, Am. J. Blood Res., 2019, 9(1), p 1–14.

32.

M.R. Vazirisereshk, A. Martini, D.A. Strubbe and M.Z. Baykara, Solid Lubrication with MoS2: A Review, Lubricants, 2019, 57(7), p 1–35. https://doi.org/10.3390/lubricants7070057CrossRef

33.

Z. Zhang and H. Dong, A State-of-the-Art Overview: Recent Development in Low Friction and Wear-Resistant Coatings and Surfaces for High-Temperature Forming Tools, Manufact. Rev., 2014, 24(1), p 1–12. https://doi.org/10.1051/mfreview/2015001CrossRef

34.

S. Hofmann, G. Csanyi, A.C. Ferrari, M.C. Payne and J. Robertson, Surface Diffusion: The Low Activation Energy Path for Nanotube Growth, Phys. Rev. Lett., 2005, 95, p 036101-1-036101–4.

35.

V. Raghavan, Materials science and engineering, Ch.8, Fifth edition, Prentice Hall of India Pvt. Ltd., 2005, p 177

36.

K. Hiratsuka, A. Enomoto and T. Sasada, Friction and Wear of A1₂O₃, ZrO₂ and SiO₂ Rubbed Against Pure Metals, Wear, 1992, 153, p 361–373. CrossRef

Titel: Temperature-Dependent Wear Characteristics of a High-Voltage Low-Current Electric Energy-Treated AISI 1080 Steel
verfasst von: Mousumi Mallick
Biplab Hazra
Swapan Kumar Mitra
Debasish Basak
Bijay Kumar Show
Joydeep Maity
Publikationsdatum: 17.01.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 5/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-06503-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2022

Preparation and Characterization of Superhydrophobic Silane-Based Multilayer Surface Coatings on Aluminum Surface

Experimental Investigation on Laser-Processed Micro-Dimple and Micro-Channel Textured Tools during Turning of Inconel 718 Alloy

Hardness and Strengthening Effect of Low-Pressure Chemical Vapor Deposition BCxNy Coatings Deposited on Ti-6Al-4V Alloy

Evaluating the Characteristics of Cast AZ91 Magnesium Alloy for Upset Protrusion Joining Method

Microstructural Variation and Corrosion Behavior of 60/40 Brass/Ti2SC Surface Composite through Friction Stir Processing

Effect of Friction Welding Parameters on the Mechanical and Microstructural Properties of Dissimilar IN713C-AISI 4140 Joints

Premium Partner

Marktübersichten