nach oben

Mechanics of Composite Materials

Erschienen in:

09.07.2018

Tensile, Impact, and Thermal Properties of an Epoxynovolac Matrix Composites with Cuban Henequen Fibers

verfasst von: A. A. Rodríguez Soto, J. L. Valín Rivera, L. M. S. Alves Borges, J. E. Palomares Ruiz

Erschienen in: Mechanics of Composite Materials | Ausgabe 3/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Composites based on an epoxy-novolac matrix and a Cuban henequen fiber reinforcement were investigated. A satisfactory reinforcing effect was observed for a composite material prepared by compression molding at room temperature using long random fiber mats. Tensile and impact experiments were run on the material, and its thermogravimetric analysis was performed. The breaking zone of the specimens tested in tension was examined by an electron sweep microscope. The results obtained are presented graphically and in photographs.

Vorheriger Artikel Effect of a Nanodisperse Graphite on the Viscoelastic Properties of Polyvinyl Chloride

Nächster Artikel Strength Characteristics of the Filaments and a Basalt Fiber Roving at Different Clamping Lengths and Deformation Rates

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. K. Bledzki, A. Jaszkiewicz, and D. Scherzer, “Mechanical properties of {PLA} composites with man-made cellulose and abaca fibres,” Composites: Part A, Appl. Sci. Manufact., 40, No. 4 404-412 (2009).CrossRef

A. L. Duigou, C. Baley, Y. Grohens, P. Davies, J.-Y. Cognard, R. Crachcadec, and L. Sohier, “A multi-scale study of the interface between natural fibres and a biopolymer,” Composites: Part A, Appl. Sci. Manufact., 65, 161-168 (2014).CrossRef

T. Gurunathan, S. Mohanty, and S. K. Nayak, “A review of the recent developments in biocomposites based on natural fibres and their application perspectives,” Composites: Part A, Appl. Sci. Manufact., 77, 1-25 (2015).CrossRef

C. Gonzalez Murillo and M. P. Ansell, “Mechanical properties of henequen fibre and epoxy resin composite material,” Proc. XIV Int. Conf. Mechanics of Composite Materials, Riga, Latvia, Vol. 1, p. 61 (2011).

I. M. D. Rosa, C. Santulli, and F. Sarasini, “Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated phormium tenax leaf fibers”, Materials & Design (1980-2015), 31, No. 5, 2397-2405 (2010).CrossRef

V. Sreenivasan, D. Ravindran, V. Manikandan, and R. Narayanasamy, “Mechanical properties of randomly oriented short sansevieria cylindrical fibre/polyester composites,” Materials & Design, 32, No. 4, 2444-2455 (2011).CrossRef

E. Nassiopoulos and J. Njuguna, “Thermo-mechanical performance of poly(lactic acid)/ax fibre-reinforced biocomposites,” Materials & Design, Pt B, 66, 473-485 (2015), Lightweight Materials and Structural Solutions for Transport Applications.

A. Kiruthika, “A review on physico-mechanical properties of bast fibre reinforced polymer composites,” J. of Building Engineering, 9, 91-99 (2017).CrossRef

Z. Azwa, B. Yousif, A. Manalo, and W. Karunasena, “A review on the degradability of polymeric composites based on natural fibres,” Materials and Design, 47, 424-442(2013). https://doi.org/10.1016/j.matdes.2012.11.025.CrossRef

10.

J. L. Changduk Kong and Hyunbum Park, “Study on structural design and analysis of ax natural fiber composite tank manufactured by vacuum assisted resin transfer molding,” Materials and Design, 130, 21-25 (2014).

11.

K. Pickering, M. A. Efendy, and T. Le, “A review of recent developments in natural fibre composites and their mechanical performance,” Composites: Part A: Appl. Sci. Manufact., 83, 98-112 (2016), Special Issue on Biocomposites.

12.

W. Jinyan, L. Rui, and J. Xigao, Handbook of Epoxy Blends, Springer Int. Publ., 1-29 (2016).

13.

A.-A. Rodríguez-Soto, L.-M. Sanabio-Alves-Borges, J.-L. Valín-Rivera, D. Díaz-Batista, “Fabrication of a composite with epoxy matrix and henequen long fibers as reinforcement and with random orientation,” Ingeniería Mecánica, 18, No. 2, 122-128 (2015).

14.

A. R. Martin, M. A. Martins, L. H. C. Mattoso, and O. R. R. F. Silva, “Caracterização química e estrutural de fibra de sisal da variedade agave sisalana,” 19, 40-46 (2009).

15.

H. O. Maurya, M. Gupta, R. Srivastava, and H. Singh, “Study on the mechanical properties of epoxy composite using short sisal fibre,” Proc. 4th Int. Conf. Materials Processing and Characterzation, 2, No. 4, 1347-1355 (2015).

16.

W. Sitticharoen, A. Chainawakul, T. Sangkas, and Y. Kuntham “Rheological and mechanical properties of silica-based bagasse-fiber-ash-reinforced recycled HDPE composites,” Mech. Compos. Mater., 52, No. 3, 421-432 (2016).CrossRef

17.

K. H.-R. M. Ramesh and K. Palanikumar, “Comparative evaluation on properties of hybrid glass fiber- sisal/jute reinforced epoxy composites,” Procedia Engineering, 51, 745-750 (2013).CrossRef

Titel: Tensile, Impact, and Thermal Properties of an Epoxynovolac Matrix Composites with Cuban Henequen Fibers
verfasst von: A. A. Rodríguez Soto
J. L. Valín Rivera
L. M. S. Alves Borges
J. E. Palomares Ruiz
Publikationsdatum: 09.07.2018
Verlag: Springer US
Erschienen in: Mechanics of Composite Materials / Ausgabe 3/2018
Print ISSN: 0191-5665
Elektronische ISSN: 1573-8922
DOI: https://doi.org/10.1007/s11029-018-9744-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2018

Effect of Hole Machining Method on the Behavior of CFRP Laminates Under Low-Velocity Impacts

Strength Characteristics of the Filaments and a Basalt Fiber Roving at Different Clamping Lengths and Deformation Rates

Mechanical Behavior of a Unidirectional Basalt-Fiber-Reinforced Plastic Under Thermomechanical Loadings

Diagram and Parameters of Fatigue Sensitivity for Evaluating the Residual Strength of Layered GFRP Composites After Preliminary Cyclic Loadings

Effect of a Nanodisperse Graphite on the Viscoelastic Properties of Polyvinyl Chloride

Thermoelastic Deformation of a Circular Sandwich Plate by Local Loads

Premium Partner

Marktübersichten