nach oben

Rock Mechanics and Rock Engineering

Erschienen in:

20.05.2023 | Original Paper

The Effects of High Temperature on Crack Propagation and Failure Characteristics of Sandstone

verfasst von: Jie Zhu, Tong Qi, Jiarun Li, Zhiyuan Cheng, Yubo Zhang

Erschienen in: Rock Mechanics and Rock Engineering | Ausgabe 8/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Mechanical properties of reservoirs and overlying strata in the condition of underground coal gasification (UCG) are vital to the stability of surrounding rock. In this work, sandstone samples of seam roof were collected and a series of experiments including X-ray computed tomography (CT) scanning, X-ray diffraction (XRD) and uniaxial compression tests with synchronous acoustic emission (AE) monitor were conducted to study crack distribution, propagation, minerals composition and failure modes of sandstone samples after different temperature treatments. As the treatment temperature increases, the threshold ratios of crack initiation stress and rupture stress gradually decline. Tensile failure mode of the biplane symmetric is dominant for sandstone samples treated with 25 °C and 200 °C. Single plane shear failure mode is dominant for 400 °C and 600 °C. Nevertheless, for 800 °C and 1000 °C, comprehensive features of the above temperatures are exhibited, resulting in a complex failure mode. 800 °C is the threshold temperature for failure behavior and uniaxial compressive strength (UCS). The primary fracture morphology plays a critical role in crack propagation and failure mode of sandstone samples. When axial stress reaches 96% of peak stress, peak frequency abruptly declines. It discloses the precursory features of the critical failure of sandstones after different temperature treatments. Meanwhile, various forms of water evaporation, the muscovite and kaolinite decomposition as well as phase transformation of quartz due to high temperature affect the mechanical properties and failure modes of sandstone. The results can guide the safety evaluation and roof disaster prevention of UCG.

Vorheriger Artikel Modeling Rock Fracturing Processes Using the Phase Field Numerical Manifold Method

Nächster Artikel Modeling Injection-Induced Fracture Propagation in Crystalline Rocks by a Fluid–Solid Coupling Grain-Based Model

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Akdag S, Karakus M, Taheri A, Nguyen G, He MC (2018) Effect of thermal damage on strain burst mechanism of brittle rocks under true-triaxial loading conditions. Rock Mech Rock Eng 51:1657–1682. https://doi.org/10.1007/s00603-018-1415-3CrossRef

Aker E, Kühn D, Vavryčuk V, Soldal M, Oye V (2014) Experimental investigation of acoustic emissions and their moment tensors in rock during failure. Int J Rock Mech Min Sci 70:286–295. https://doi.org/10.1016/j.ijrmms.2014.05.003CrossRef

Aldahdooh M, Bunnori NM (2013) Crack classification in reinforced concrete beams with varying thickness by mean if acoustic emission signal features. Constr Build Mater 45:282–288. https://doi.org/10.1016/j.conbuildmat.2013.03.090CrossRef

Bhutto AW, Bazmi AA, Zahedi G (2013) Underground coal gasification: From fundamentals to applications. Prog Energy Combust Sci 39(1):189–214. https://doi.org/10.1016/j.pecs.2012.09.004CrossRef

Cai M, Kaiser PK, Morioka H, Minami M, Maejima T, Tasaka Y, Kurose H (2007) FLAC/PFC coupled numerical simulation of AE in large-scale underground excavations. Int J Rock Mech Min Sci 44(4):550–564. https://doi.org/10.1016/j.ijrmms.2006.09.013CrossRef

Chakrabati B, Yates T, Lewry A (1996) Effect of fire damage on natural stonework in buildings. Constr Build Mater 10:539–544. https://doi.org/10.1016/0950-0618(95)00076-3CrossRef

Chen Y (1977) Application of acoustic emission techniques to rock mechanics research. Chin J Geophys 20(04):312–322

Chen SW, Yang CH, Wang GB (2017) Evolution of thermal damage and permeability of Beishan granite. Appl Therm Eng 110:1533–1542. https://doi.org/10.1016/j.applthermaleng.2016.09.075CrossRef

Chen J, Ye YB, Pu YY, Xu WH, Mengli DR (2022) Experimental study on uniaxial compression failure modes and acoustic emission characteristics of fissured sandstone under water saturation. Theor Appl Fract Mec 119:103359. https://doi.org/10.1016/j.tafmec.2022.103359CrossRef

Dong LJ, Hu QC, Tong XJ, Liu YF (2020) Velocity-free MS/AE source location method for three-dimensional hole-containing structures. Engineering 6:827–834. https://doi.org/10.1016/j.eng.2019.12.016CrossRef

Ekneligoda TC, Marshall AM (2018) A coupled thermal-mechanical numerical model of underground coal gasification (UCG) including spontaneous coal combustion and its effects. Int J Coal Geol 199:31–38. https://doi.org/10.1016/j.coal.2018.09.015CrossRef

Fan LF, Li H, Xi Y (2022) Evaluation of the effects of three different cooling methods on the dynamic mechanical properties of thermal-treated sandstone. Bull Eng Geol Environ 81:154. https://doi.org/10.1007/s10064-022-02630-1CrossRef

Feng G, Kang Y, Chen F, Liu YW, Wang XC (2017) The influence of temperatures on mixed-mode (I+II) and mode-II fracture toughness of sandstone. Eng Fract Mech 189:51–63. https://doi.org/10.1016/j.engfracmech.2017.07.007CrossRef

Gao W, Zagorščak R, Thomas HR (2022) Numerical study of ground deformation during underground coal gasification through coupled flow-geomechanical modelling. Fuel 312:122833. https://doi.org/10.1016/j.fuel.2021.122833CrossRef

Gautam PK, Verma AK, Jha MK, Sarkar K, Singh TN, Bajpai RK (2016) Study of strain rate and thermal damage of Dholpur sandstone at elevated temperature. Rock Mech Rock Eng 49:3805–3815. https://doi.org/10.1007/s00603-016-0965-5CrossRef

Geiger L (1910) Herdbestimmung bei erdbeben aus den ankunftszeiten. nachrichten von der gesellschaft der wissenschaften zu göttingen. Mathematisch-Physikalische Klasse 4:331–349

Hadizadeh J, Law RD (1991) Water-weakening of sandstone and quartzite deformed at various stress and strain rates. Int J Rock Mech Min Sci 28(5):431–439. https://doi.org/10.1016/0148-9062(91)90081-VCrossRef

Hajpál M, Török Á (1989) Petrophysical and mineralogical studies of burnt sandstones. In: 2nd international PhD symposium in civil engineering. Budapest, pp. 1–9

Heap MJ, Baud P, Meredith PG, Vinciguerra S, Reuschlé T (2014a) The permeability and elastic moduli of tuff from Campi Flegrei, Italy: implications for ground deformation modelling. Solid Earth 5:25–44. https://doi.org/10.5194/se-5-25-2014CrossRef

Heap MJ, Lavallee Y, Petrakova L, Baud T, Varley NR, Dingwell DB (2014b) Microstructural controls on the physical and mechanical properties of edifice forming andesites at Volcán de Colima, Mexico. J Geophys Res Solid Earth 119(4):2925–2963. https://doi.org/10.1002/2013JB010521CrossRef

Hudson JA, Brown ET, Fairhurst C (1972) Shape of the complete stress-strain curve for rock. In: Cording EJ (ed) Proc. 131st symposium on rock mechanics, Urbana, pp 773–795. https://doi.org/10.1016/0148-9062(74)92247-5

ISRM (2007) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. In: Hudson U(ed) Suggested methods prepared by the commission on testing methods. International Society for Rock Mechanics, ISRM Turkish National Group, Ankara. https://doi.org/10.2113/gseegeosci.15.1.47

Jiao YB, Zhang Y, Zhang MS, Fu LX, Zhang LD (2019) Investigation of fracture modes in pervious asphalt under splitting and compression based on acoustic emission monitoring. Eng Fract Mech 211(5):209–220. https://doi.org/10.1016/j.engfracmech.2019.02.025CrossRef

Jin PH, Hu YQ, Shao JX, Liu ZJ, Feng G, Song S (2020) Influence of temperature on the structure of pore–fracture of sandstone. Rock Mech and Rock Eng 53:1–12. https://doi.org/10.1007/s00603-019-01858-wCrossRef

Kumari W, Beaumont D, Ranjith P, Perera M, Isaka BA, Khandelwal M (2019) An experimental study on tensile characteristics of granite rocks exposed to different high-temperature treatments. Geomech Geophys Geo-Energy Geo-Resour 5(1):47–64. https://doi.org/10.1007/s40948-018-0098-2CrossRef

Laouafa F, Farret R, Vidal-Gilbert S, Kazmierczak JB (2016) Overview and modeling of mechanical and thermomechanical impact of underground coal gasification exploitation. Mitig Adapt Strat Glob Change 21(4):547–576. https://doi.org/10.1007/s11027-014-9542-yCrossRef

Li M, Wang DM, Shao ZL (2020) Experimental study on changes of pore structure and mechanical properties of sandstone after high-temperature treatment using nuclear magnetic resonance. Eng Geol 275:105739. https://doi.org/10.1016/j.enggeo.2020.105739CrossRef

Li HR, Qiao YF, Shen RX, He MC, Cheng T, Xiao YM, Tang J (2021) Effect of water on mechanical behavior and acoustic emission response of sandstone during loading process: Phenomenon and mechanism. Eng Geol 294:106386. https://doi.org/10.1016/j.enggeo.2021.106386CrossRef

Liu JR, Li BY, Tian W, Wu XR (2018) Investigating and predicting permeability variation in thermally cracked dry rocks. Int J Rock Mech Min Sci 103:77–88. https://doi.org/10.1016/j.ijrmms.2018.01.023CrossRef

Lockner D (1993) The role of acoustic emission in the study of rock fracture. Int J Rock Mech Min 30(7):883–899. https://doi.org/10.1016/0148-9062(93)90041-BCrossRef

Mahanta B, Ranjith PG, Vishal V, Singh TH (2020) Temperature-induced deformational responses and microstructural alteration of sandstone. J Petrol Sci Eng 192:107239. https://doi.org/10.1016/j.petrol.2020.107239CrossRef

Mandapati RN, Ghodke P (2020) Modeling of gasification process of Indian coal in perspective of underground coal gasification (UCG). Environ Dev Sustain 22:6171–6186. https://doi.org/10.1007/s10668-019-00469-3CrossRef

Martin CD, Chandler NA (1994) The progressive fracture of Lac du Bonnet granite. Int J Rock Mech Min Sci Geomech Abstr 31(6):643–659. https://doi.org/10.1016/0148-9062(94)90005-1CrossRef

Mclaskey GC, Lockner DA (2018) Shear failure of a granite pin traversing a saw cut fault. Int J Rock Mech Min Sci 110:97–110. https://doi.org/10.1016/j.ijrmms.2018.07.001CrossRef

Meng T, Liu RC, Meng XX, Zhang DH, Hu YQ (2019) Evolution of the permeability and pore structure of transversely isotropic calcareous sediments subjected to triaxial pressure and high temperature. Eng Geol 253:27–35. https://doi.org/10.1016/j.enggeo.2019.03.007CrossRef

Michalske T, Freiman S (1982) A molecular interpretation of stress corrosion in silica. Nature 295(5849):511–512. https://doi.org/10.1038/295511A0CrossRef

Pathiranagei SV, Gratchev I, Kong R (2021) Engineering properties of four different rocks after heat treatment. Geomech Geophys Geoenergy Georesour 7(1):1–12. https://doi.org/10.1007/s40948-020-00211-8CrossRef

Pathiranagei SV, Gratchev I, Sokolowsk KA (2022) Investigation of the microstructural characteristics of heated sandstone by micro-computed tomography technique. Environ Earth Sci 81:401. https://doi.org/10.1007/s12665-022-10514-6CrossRef

Ramezanian M, Emadi H (2020) Investigating effects of temperature and confining pressure on dynamic elastic properties and permeability-an experimental study. Geomech Energy Environ 22:100179. https://doi.org/10.1016/j.gete.2020.100179CrossRef

Ranjith PG, Viete DR, Chen BJ, Perera M (2012) Transformation plasticity and the effect of temperature on the mechanical behaviour of Hawkesbury sandstone at atmospheric pressure. Eng Geol 151:120–127. https://doi.org/10.1016/j.enggeo.2012.09.007CrossRef

Rathnaweera TD, Ranjith PG, Gu X, Perera MSA, Kumari WGP, Wanniarachchi WAM, Haque A, Li JC (2018) Experimental investigation of thermomechanical behaviour of clay-rich sandstone at extreme temperatures followed by cooling treatments. Int J Rock Mech Min Sci 107:208–223. https://doi.org/10.1155/2021/9018462CrossRef

Rodríguez P, Celestino TB (2018) Application of acoustic emission monitoring and signal analysis to the qualitative and quantitative characterization of the fracturing process in rocks. Eng Fract Mech 210:54–69. https://doi.org/10.1016/j.engfracmech.2018.06.027CrossRef

Rosenbrand E, Fabricius IL, Fisher Q, Grattoni C (2015) Permeability in Rotliegend gas sandstones to gas and brine as predicted from NMR, mercury injection and image analysis. Mar Petrol Geol 64:189–202. https://doi.org/10.1016/j.marpetgeo.2015.02.009CrossRef

Rück M, Rahner R, Sone H, Dresen G (2017) Initiation and propagation of mixed mode fractures in granite and sandstone. Tectonophysics 717:270–283. https://doi.org/10.1016/j.tecto.2017.08.004CrossRef

Shcherbakov IP, Chmel AE (2016) Random and cooperative accumulation of intra- and intergranular defects in granite subject to high-temperature impact fracture. Russ Geol Geophys 57(11):1646–1652. https://doi.org/10.1016/j.rgg.2016.10.010CrossRef

Shi XS, Jing HW, Yin Q, Zhao ZL, Han GS, Gao Y (2020) Investigation on physical and mechanical properties of bedded sandstone after high-temperature exposure. Bull Eng Geol Environ 79:2591–2606. https://doi.org/10.1007/s10064-020-01729-7CrossRef

Sirdesai NN, Singh TN, Ranjith PG, Singh R (2016a) Effect of varied durations of thermal treatment on the tensile strength of red sandstone. Rock Mech Rock Eng 50:205–231. https://doi.org/10.1007/s00603-016-1047-4CrossRef

Sirdesai NN, Mahanta B, Singh TN, Ranjith PG (2016b) Elastic modulus of thermally treated fine grained sandsto-ne using non-contact laser extensometer. RARE 91:105–109. https://doi.org/10.2991/RARE-16.2016.17CrossRef

Sirdesai NN, Singh TN, Gamage PR (2017) Thermal alterations in the poro-mechanical characteristic of an Indian sandstone—a comparative study. Eng Geol 226:208–220. https://doi.org/10.1016/j.enggeo.2017.06.010CrossRef

Sirdesai NN, Mahanta B, Ranjith PG, Singh TN (2019) Effects of thermal treatment on physico-morphological properties of Indian fine-grained sandstone. Bull Eng Geol Environ 78:883–897. https://doi.org/10.1007/s10064-017-1149-6CrossRef

Smedt MD, Andreev K, Shetty N, Verstrynge E (2019) Effectiveness of acoustic emission parameters to monitor the crack formation in refractories—case study on castables of different brittleness. J Eur Ceram Soc 39(16):5423–5432. https://doi.org/10.1016/j.jeurceramsoc.2019.08.016CrossRef

Stanchits S, Surdi A, Gathogo P, Edelman E, Suarez-Rivera R (2014) Onset of hydraulic fracture initiation monitored by acoustic emission and volumetric deformation measurements. Rock Mech Rock Eng 47:1521–1532. https://doi.org/10.1007/s00603-014-0584-yCrossRef

Strugala-Wilczek A, Kapusta K, Pankiewicz-Sperka M (2022) Pollutants release from the residues remaining after underground gasification (UCG) of ortho- and meta-lignites. Fuel 327:125126. https://doi.org/10.1016/j.fuel.2022.125126CrossRef

Sun Q, Zhang ZZ, Xue L, Zhu SY (2013) Physico-mechanical properties variation of rock with phase transformation under high temperature. Chin J Rock Mech Eng 32(5):935–942 (in Chinese)

Sun Q, Lü C, Cao LW, Li WC, Geng JS, Zhang WQ (2016) Thermal properties of sandstone after treatment at high temperature. Int J Rock Mech Min Sci 85:60–66. https://doi.org/10.1016/j.ijrmms.2016.03.006CrossRef

Sun Q, Geng JS, Zhao F (2020) Experiment study of physical and mechanical properties of sandstone after variable thermal cycles. Bull Eng Geol Environ 79:3771–3784. https://doi.org/10.1007/s10064-020-01779-xCrossRef

Świt G, Zapała-Sławeta J (2020) Application of acoustic emission to monitoring the course of the alkali-silica reaction. Bull Pol Acad Sci Tech 68(1):169–178. https://doi.org/10.24425/BPASTS.2020.131832CrossRef

Sygała A, Bukowska M (2019) Identification of temperature effect on post-critical geomechanical properties of loaded sandstones. Arab J Geosci 12(10):315. https://doi.org/10.1007/s12517-019-4464-3CrossRef

Tian WL, Yang SQ, Huang YH, Hu B (2020) Mechanical behavior of granite with different grain sizes after high-temperature treatment by particle flow simulation. Rock Mech Rock Eng 53:1791–1807. https://doi.org/10.1007/s00603-019-02005-1CrossRef

Tripathi A, Gupta N, Singh AK, Mohanty SP, Rai N, Pain A (2021) Effects of elevated temperatures on the microstructural, physico-mechanical and elastic properties of Barakar sandstone: a study from one of the world’s largest underground coalmine fire region, Jharia, India. Rock Mech and Rock Eng 54:1293–1314. https://doi.org/10.1007/s00603-020-02315-9CrossRef

Uñoz-Ibáñez A, Delgado-Martín J, Herbón-Penabad M, Alvarellos-Iglesias J (2021) Acoustic emission monitoring of mode I fracture toughness tests on sandstone rocks. J Petrol Sci Eng 205:108906. https://doi.org/10.1016/j.petrol.2021.108906CrossRef

Wang Y, Zhang B, Gao SH, Li CH (2020) Investigation on the effect of freeze-thaw on fracture mode classification in marble subjected to multi-level cyclic loads. Theor Appl Fract Mech 111:102847. https://doi.org/10.1016/j.conbuildmat.2022.129789CrossRef

Xiao WJ, Zhang DM, Yang H, Yu BC, Li SJ (2022) Evaluation and analysis of sandstone brittleness under the influence of temperature. Geomech Geophys Geo-Energ Geo-Resour 8(1):23–42. https://doi.org/10.1007/40948-021-00324-8CrossRef

Xin L, Li C, Liu WT, Xu M, Xie J, Han LM, An MY (2021) Change of sandstone microstructure and mineral transformation nearby UCG channel. Fuel Process Technol 211:106575. https://doi.org/10.1016/j.fuproc.2020.106575CrossRef

Yang SQ, Xu P, Li YB, Huang YH (2017a) Experimental investigation on triaxial mechanical and permeability behavior of sandstone after exposure to different high temperature treatments. Geothermics 69:93–109. https://doi.org/10.1016/j.geothermics.2017.04.009CrossRef

Yang SQ, Ranjith PG, Jing HW, Tian WL, Ju Y (2017b) An experimental investigation on thermal damage and failure mechanical behavior of granite after exposure to different high temperature treatments. Geothermics 65:180–197. https://doi.org/10.1016/j.geothermics.2016.09.008CrossRef

Yang J, Mu ZL, Yang SQ (2020) Experimental study of acoustic emission multi-parameter information characterizing rock crack development. Eng Fract Mech 232:107045CrossRef

Yang J, Mu ZL, Yang SQ, Tian WL (2022) Experimental investigation of microscopic crack development and damage characteristics of sandstone based on acoustic emission characteristic parameters. Geomech Geophys Geo-Energ Geo-Resour 8:51. https://doi.org/10.1016/j.engfracmech.2020.107045CrossRef

Yu Y, Zhao DC, Feng GL, Geng DX, Guo HS (2022) Energy evolution and acoustic emission characteristics of uni-axial compression failure of anchored layered sandstone. Front Earth Sci 10:841598. https://doi.org/10.3389/feart.2022.841598CrossRef

Zhang Y, Zhang XJ, Zhao YS (2005) Process of sandstone thermal cracking. Acta Geophys Sin 48:656–659. https://doi.org/10.1002/CJG2.706CrossRef

Zhang L, Mao X, Lu A (2009) Experimental study on the mechanical properties of rocks at high temperature. Sci China Ser E Technol Sci 52:641–646. https://doi.org/10.1007/s11431-009-0063-yCrossRef

Zhang F, Zhao JJ, Hu DW, Skoczylas F, Shao JF (2018) Laboratory investigation on physical and mechanical properties of granite after heating and water-cooling treatment. Rock Mech and Rock Eng 51(3):677–694. https://doi.org/10.1007/s00603-017-1350-8CrossRef

Zhang Y, Li G, Wang XY, Chen Z, Li Z, Wang R (2021) Microfabric characteristics of tight sandstone of Xujiahe Formation in western Sichuan after high temperature and its effect on mechanical properties. Chin J Rock Mech Eng 40(11):2249–2259. https://doi.org/10.13722/j.cnki.jrme.2021.0135. (in Chinese)CrossRef

Zhang JY, Feng XT, Yang CX, Lin F, Li SP, Tong TY, Su XX (2022) The characteristics and mechanism of microwave-induced borehole fracturing of hard rock under true triaxial stress. Eng Geol 306:106768. https://doi.org/10.1016/j.enggeo.2022.106768CrossRef

Zhao K, Yang DX, Zeng P, Huang Z, Wu WK, Li B, Teng TY (2021) Effect of water content on the failure pattern and acoustic emission characteristics of red sandstone. Int J Rock Mech Min Sci 142:10470. https://doi.org/10.1016/j.ijrmms.2021.104709CrossRef

Zuo JP, Li YL, Xiaoyan ZXY, Zhao ZH, Wang TZ (2018) The effects of thermal treatments on the subcritical crack growth of pingdingshan sandstone at elevated high temperatures. Rock Mech and Rock Eng 51:3439–3454. https://doi.org/10.1007/s00603-018-1527-9CrossRef

Titel: The Effects of High Temperature on Crack Propagation and Failure Characteristics of Sandstone
verfasst von: Jie Zhu
Tong Qi
Jiarun Li
Zhiyuan Cheng
Yubo Zhang
Publikationsdatum: 20.05.2023
Verlag: Springer Vienna
Erschienen in: Rock Mechanics and Rock Engineering / Ausgabe 8/2023
Print ISSN: 0723-2632
Elektronische ISSN: 1434-453X
DOI: https://doi.org/10.1007/s00603-023-03356-6

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2023

A Novel Grouting Simulation Method Considering Diffusion and Loss of Slurry in Flowing Water: Interphase Miscible-Transport Time-Tracking (IM-3T) Method

Effect of Different Filling Media Between Explosive and Blast-Hole Wall on Rock Blasting

Hybrid Data-Driven Polyaxial Rock Strength Meta Model

Hybrid Fuzzy-Based Modeling of Shear Strength Parameters of Rocks Using Petrographic Properties

Fracture Coalescence Process Between Two Pre-existing Flaws in Granite Based on Coupling Exterior and Interior Observation Techniques

Comparative Study on Mechanical Properties and Crashing Characteristics of Granite After Real-Time High-Temperature and Natural-Cooling