nach oben

Journal of Materials Engineering and Performance

Erschienen in:

02.03.2023 | Technical Article

The Enhanced Corrosion Resistance of Harmonic Structured Cantor Alloy in Hank’s Simulated Body Fluid

verfasst von: Debdipta Banik, Saikat Mandal, S. Mukherjee, Hiroshi Fujiwara, K. Ameyama, K. Mondal

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 1/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Present study deals with the corrosion behavior of a harmonic structured Cantor alloy (FeCrMnNiCo) in freely aerated Hank’s simulated body fluid. Harmonic structure featuring distinguished core regions containing clusters of coarse grains and shell regions containing a continuous network of fine grains is attained by powder metallurgical route. X-ray diffraction confirmed FCC structure both in the core and shell regions. Corrosion tests were carried out on the harmonic structured Cantor alloy and compared with its conventional counterpart and harmonic structured 316L stainless steel, a well-known biomaterial. The corrosion resistance of the harmonic structured Cantor alloy is found to be better than the conventional one and comparable to the harmonic structured 316L stainless steel. During corrosion, enrichment of Cr at the shell regions of the harmonic structured Cantor alloy allows early passivation, leading to its enhanced corrosion resistance.

Vorheriger Artikel Effect of Post-Weld Heat Treatment on Hardness and Corrosion Resistance of Dissimilar Electron Beam Welded Joints of Inconel 713LC and AISI 4140 Steel

Nächster Artikel Effect of Grain Size on Adiabatic Shear Sensitivity of AZ31 Magnesium Alloys

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

G.E. Dieter, Mechanical Metallurgy, SI Metric Edition, McGraw-Hill Book Company, London, 1988.

K.D. Ralston and N. Birbilis, Effect of Grain Size on Corrosion: A Review, Corrosion, 2010, 66(7), p 075005–075005.CrossRef

M. Ota, K. Shimojo, S. Okada, S.K. Vajpai, and K. Ameyama, Harmonic Structure Design and Mechanical Properties of Pure Ni Compact, J. Powder Metall. Min., 2014, 3, p 1000122.

M. Ota, S.K. Vajpai, R. Imao, K. Kurokawa, and K. Ameyama, Application of High Pressure Gas Jet Mill Process to Fabricate High Performance Harmonic Structure Designed Pure Titanium, Mater. Trans., 2015, 56, p 154–159. https://doi.org/10.2320/matertrans.M2014280CrossRef

K. Ameyama, F. Cazes, H. Couque, G. Dirras, S. Kikuchi, J. Li, and S.K. Vajpai, Harmonic Structure, A Promising Microstructure Design, Mater. Res. Lett., 2022, 10(7), p 440–471. https://doi.org/10.1080/21663831.2022.2057203CrossRef

S.K. Vajpai, C. Sawangrat, O. Yamaguchi, O.P. Ciuca, and K. Ameyama, Effect of Bimodal Harmonic Structure Design on the Deformation Behaviour and Mechanical Properties of Co-Cr-Mo Alloy, Mater. Sci. Eng. C, 2016, 58, p 1008–1015. https://doi.org/10.1016/j.msec.2015.09.055CrossRef

R. Zheng, Z. Zhang, M. Nakatani, M. Ota, X. Chen, C. Ma, and K. Ameyama, Enhanced Ductility in Harmonic Structure Designed SUS316L Produced by High Energy Ball Milling and Hot Isostatic Sintering, Mater. Sci. Eng. A, 2016, 674, p 212–220. https://doi.org/10.1016/j.msea.2016.07.048CrossRef

P.K. Rai, S. Shekhar, K. Yagi, K. Ameyama, and K. Mondal, Corrosion Behavior of Harmonic Structured 316L Stainless Steel in 3.5% NaCl and Simulated Body Fluid Solution, J. Mater. Eng. Perform., 2019, 28, p 7554–7564. https://doi.org/10.1007/s11665-019-04428-xCrossRef

B. Cantor, I.T.H. Chang, P. Knight, and A.J.B. Vincent, Microstructural Development in Equiatomic Multicomponent Alloys, Mater. Sci. Eng. A, 2004, 375, p 213–218. https://doi.org/10.1016/j.msea.2003.10.257CrossRef

10.

F. Otto, A. Dlouhý, C. Somsen, H. Bei, G. Eggeler, and E.P. George, The Influences of Temperature and Microstructure on the Tensile Properties of a CoCrFeMnNi High-Entropy Alloy, Acta Mater., 2013, 61, p 5743–5755. https://doi.org/10.1016/j.actamat.2013.06.018CrossRef

11.

N. Stepanov, M. Tikhonovsky, N. Yurchenko, D. Zyabkin, M. Klimova, S. Zherebtsov, A. Efimov, and G. Salishchev, Effect of Cryo-Deformation on Structure and Properties of CoCrFeNiMn High-Entropy Alloy, Intermetallics, 2015, 59, p 8–17. https://doi.org/10.1016/j.intermet.2014.12.004CrossRef

12.

H. Luo, Z. Li, A.M. Mingers, and D. Raabe, Corrosion Behavior of an Equiatomic CoCrFeMnNi High-Entropy Alloy Compared with 304 Stainless Steel in Sulfuric Acid Solution, Corr. Sci., 2018, 134, p 131–139. https://doi.org/10.1016/j.corsci.2018.02.031CrossRef

13.

S. Pathak, N. Kumar, R.S. Mishra, and P.S. De, Aqueous Corrosion Behavior of Cast CoCrFeMnNi Alloy, J. Mater. Eng. Perform., 2019, 28, p 5970–5977. https://doi.org/10.1007/s11665-019-04329-zCrossRef

14.

D. Banik, B. Bhushan, S. Mukherjee, H. Fujiwara, K. Ameyama, and K. Mondal, Effect of Harmonic Structure on the Electrochemical Behavior of High Entropy Cantor Alloy in NaCl Solution, Mater. Chem. Phys., 2023 https://doi.org/10.1016/j.matchemphys.2023.127414CrossRef

15.

C. Morsiya, A Review on Parameters Affecting Properties of Biomaterial SS 316L, Aust. J. Mech. Eng., 2022, 22, p 803–813. https://doi.org/10.1080/14484846.2020.1752975CrossRef

16.

Z. Han, P. Zhang, L. Lei, S. Liang, Q. Wang, Y. Lai, and J. Li, Morphology and Particle Analysis of the Ni3Al-Based Spherical Powders Manufactured by Supreme-Speed Plasma Rotating Electrode Process, J. Mater. Res. Technol., 2020, 9, p 13937–13944. https://doi.org/10.1016/j.jmrt.2020.09.102CrossRef

17.

G. ASTM, Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements, ASTM International, Pennsylvania, 2014.

18.

R. Joham, N.K. Sharma, K. Mondal, and S. Shekhar, Low Temperature Cross-Rolling to Modify Grain Boundary Character Distribution and Its Effect on Sensitization of SS304, J. Mater. Process. Technol., 2017, 240, p 324–331. https://doi.org/10.1016/j.jmatprotec.2016.10.014CrossRef

19.

P. Atanda, A. Fatudimu, and O. Oluwole, Sensitisation Study of Normalized 316L Stainless Steel, J. Miner. Mater. Charact. Eng., 2010, 9, p 13–23. https://doi.org/10.4236/jmmce.2010.91002CrossRef

20.

M.E. Orazem and B. Tribollet, Electrochemical Impedance Spectroscopy, Wiley, Heidelberg, 2008.CrossRef

21.

Z. Lukács and T. Kristóf, A Generalized Model of the Equivalent Circuits in the Electrochemical Impedance Spectroscopy, Electrochim. Acta, 2020, 363, p 137199. https://doi.org/10.1016/j.electacta.2020.137199CrossRef

22.

J. Alcántara, B. Chico, J. Simancas, I. Díaz, D. de la Fuente, and M. Morcillo, An Attempt to Classify the Morphologies Presented by Different Rust Phases Formed During the Exposure of Carbon Steel to Marine Atmospheres, Mater. Charact., 2016, 118, p 65–78. https://doi.org/10.1016/j.matchar.2016.04.027CrossRef

23.

U. Schwertmann, H. Stanjek, and H.H. Becher, Long-Term In Vitro Transformation of 2-Line Ferrihydrite to Goethite/Hematite at 4, 10, 15 and 25°C, Clay Miner., 2004, 39, p 433–438. https://doi.org/10.1180/0009855043940145CrossRef

24.

M. Mohammadtaheri, Q. Yang, Y. Li, and J. Corona-Gomez, The Effect of Deposition Parameters on the Structure and Mechanical Properties of Chromium Oxide Coatings Deposited by Reactive Magnetron Sputtering, Coatings, 2018, 8, p 111. https://doi.org/10.3390/coatings8030111CrossRef

25.

J.R. Genin, L. Dhouibi, P. Refait, M. Abdelmoula, and E. Triki, Influence of Phosphate on Corrosion Products of Iron in Chloride-Polluted-Concrete-Simulating Solutions: Ferrihydrite vs Green Rust, Corrosion, 2002, 58(6), p 467–478. https://doi.org/10.5006/1.3277637CrossRef

26.

A. Tanji, F. Gapsari, A. Syahrom, M.H. Idris, and H. Hermawan, Effect of Mo Addition on the Pitting Resistance of TiMn Alloys in Hanks’ Solution, J. Alloys Compd., 2021, 871, p 159582. https://doi.org/10.1016/j.jallcom.2021.159582CrossRef

27.

X.Y. Gu, Y.N. Dong, and Y.X. Zhuang, Microstructure and Mechanical Properties of CoCrFeMnNiSnx High-Entropy Alloys, Met. Mater. Int., 2020, 26, p 292–301. https://doi.org/10.1007/s12540-019-00328-wCrossRef

28.

P.K. Rai, S. Shekhar, K. Yagi, K. Ameyama, and K. Mondal, Fretting Wear Mechanism for Harmonic, Non-Harmonic and Conventional 316L Stainless Steels, Wear, 2019, 424–425, p 23–32. https://doi.org/10.1016/j.wear.2019.02.005CrossRef

Titel: The Enhanced Corrosion Resistance of Harmonic Structured Cantor Alloy in Hank’s Simulated Body Fluid
verfasst von: Debdipta Banik
Saikat Mandal
S. Mukherjee
Hiroshi Fujiwara
K. Ameyama
K. Mondal
Publikationsdatum: 02.03.2023
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 1/2024
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-023-07965-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2024

Creep-Resistant Ferritic-Martensitic Steels for Power Plant Applications

Effect of Cooling Rate on Microstructure and Mechanical Properties of a Microlaminated Low-Density Steel

High-Performance Ti-6554 Alloy Manufactured Using Irregular Powder via Vacuum Pressureless Sintering Followed by Forging

Effect of Post-Weld Heat Treatment on Hardness and Corrosion Resistance of Dissimilar Electron Beam Welded Joints of Inconel 713LC and AISI 4140 Steel

Effect of Powder-Pack Boronizing on the Microhardness, Wear, and Corrosion Behaviors of AISI 304L Steel

A High Strength-Ductility Balanced Mg-1Ca-0.5Mn-0.53Ce Mg Alloy Sheet by Multi-pass Low-Temperature Rolling

Premium Partner

Marktübersichten