nach oben

Tribology Letters

Erschienen in:

01.12.2021 | Original Paper

The Influence of Friction Blocks Connection Configuration on High-Speed Railway Brake Systems Performance

verfasst von: J. B. Yin, Y. K. Wu, C. Lu, W. Chen, J. L. Mo, Z. R. Zhou

Erschienen in: Tribology Letters | Ausgabe 4/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The influence of friction blocks connection configuration on the interfacial tribology behavior and FIVN (friction-induced vibration and noise) of the high-speed railway braking system is systematically investigated with a scaled brake test bench. The potential relationship among interface contact status, friction, wear, pressure distribution, thermal response, and vibration noise of the system is studied under dragging test conditions. The results indicate that the connection configuration of the friction blocks has a significant impact on systematic interfacial tribology behavior, thermal response, and vibration noise. A floating connection mode can suppress the vibration noise of the brake system. The interfacial thermal response and systematic vibration noise are quite relevant with the contact status, interfacial wear, and pressure distribution. The increase of interfacial wear will lead to an expansion of pressure concentration area and an aggravation of vibration noise. This research is helpful for further design optimization and noise reduction of the railway brake system.

Vorheriger Artikel Friction and Wear Properties of Copper Matrix Composites with CNTs/Cu Composite Foams as Reinforcing Skeletons

Nächster Artikel Influence of Operating Temperature on the Static Characteristics of an Externally Pressurized Thrust Bearing Lubricated with Refrigerant Gas

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Xiao, J.K., Xiao, S.X., Chen, J., Zhang, C.: Wear mechanism of Cu-based brake pad for high-speed train braking at speed of 380 km/h. Tribol. Int. 150, 106357 (2020). https://doi.org/10.1016/j.triboint.2020.106357CrossRef

Kasem, H., Brunel, J.F., Dufrenoy, P., Siroux, M., Desmet, B.: Thermal levels and subsurface damage induced by the occurrence of hot spots during high-energy braking. Wear 270, 355–364 (2013). https://doi.org/10.1016/j.wear.2010.11.007CrossRef

Shin, M.W., Kim, Y.H., Jang, H.: Effect of the abrasive size on the friction effectiveness and instability of brake friction materials: a case study with zircon. Tribol. Lett. 55, 371–379 (2014). https://doi.org/10.1007/s11249-014-0361-9CrossRef

Peng, T., Yan, Q., Li, G., Zhang, X., Wen, Z., Jin, X.: The braking behaviors of Cu-based metallic brake pad for high-speed train under different initial braking speed. Tribol. Lett. 65, 135 (2017). https://doi.org/10.1007/s11249-017-0914-9CrossRef

Peng, T., Yan, Q., Zhang, X.: Stability of metal matrix composite pads during high-speed braking. Tribol. Lett. 66, 63 (2018). https://doi.org/10.1007/s11249-018-1014-1CrossRef

Panier, S., Dufrénoy, P., Weichert, D.: An experimental investigation of hot spots in railway disc brakes. Wear 256, 764–773 (2007). https://doi.org/10.1016/S0043-1648(03)00459-9CrossRef

Cristol-Bulthé, A.L., Desplanques, Y., Degallaix, G.: Coupling between friction physical mechanisms and transient thermal phenomena involved in pad-disc contact during railway braking. Wear 263, 1230–1242 (2007). https://doi.org/10.1016/j.wear.2006.12.052CrossRef

Abdullah, O.I., Schlattmann, J.: Temperature analysis of a pin-on-disc tribology test using experimental and numerical approaches. Friction 4, 135–143 (2016). https://doi.org/10.1007/s40544-016-0110-1CrossRef

Tang, B., Mo, J.L., Xu, J.W., Wu, Y.K., Zhu, M.H., Zhou, Z.R.: Effect of perforated structure of friction block on the wear, thermal distribution and noise characteristics of railway brake systems. Wear 426–427, 1176–1186 (2019). https://doi.org/10.1016/j.wear.2019.01.016CrossRef

10.

Ma, J., Olofsson, U., Lyu, Y., Wahlström, J., Åström, A.H., Tu, M.: A comparison of airborne particles generated from disk brake contacts: induction versus frictional heating. Tribol. Lett. 68, 38 (2020). https://doi.org/10.1007/s11249-020-1279-zCrossRef

11.

Eriksson, M., Jacobson, S.: Tribological surfaces of organic brake pads. Tribol. Int. 33, 817–827 (2000). https://doi.org/10.1016/S0301-679X(00)00127-4CrossRef

12.

Federici, M., Perricone, G., Gialanella, S., Straffelini, G.: Sliding behaviour of friction material against cermet coatings: pin-on-disc study of the running-in stage. Tribol. Lett. 66, 53 (2018). https://doi.org/10.1007/s11249-018-1004-3CrossRef

13.

Massi, F., Giannini, O., Baillet, L.: Brake squeal as dynamic instability: an experimental investigation. J. Acoust. Soc. Am. 120, 1388–1398 (2006). https://doi.org/10.1121/1.2228745CrossRef

14.

Su, L., Gao, F., Han, X., Fu, R., Zhang, E.: Tribological behavior of copper-graphite powder third body on copper-based friction materials. Tribol. Lett. 60, 30 (2015). https://doi.org/10.1007/s11249-015-0605-3CrossRef

15.

Kchaou, M., Mat Lazim, A.R., Abdul Hamid, M.K., Abu Bakar, A.R.: Experimental studies of friction-induced brake squeal: influence of environmental sand particles in the interface brake pad-disc. Tribol. Int. 110, 307–317 (2017). https://doi.org/10.1016/j.triboint.2017.02.032CrossRef

16.

Nam, J.H., Do, H.C., Kang, J.Y.: Effect of groove surface on friction noise and its mechanism. Int. J. Precis. Eng. Manuf. 18, 1165–1172 (2017). https://doi.org/10.1007/s12541-017-0136-yCrossRef

17.

Lyu, H., Walsh, S.J., Chen, G., Zhang, L., Qian, K., Wang, L.: Analysis of friction-induced vibration leading to brake squeal using a three degree-of-freedom model. Tribol. Lett. 65, 105 (2017). https://doi.org/10.1007/s11249-017-0887-8CrossRef

18.

Massi, F., Rocchi, J., Culla, A., Berthier, Y.: Coupling system dynamics and contact behaviour: modelling bearings subjected to environmental induced vibrations and “false Brinelling” degradation. Mech. Syst. Signal Process. 24, 1068–1080 (2010). https://doi.org/10.1016/j.ymssp.2009.09.004CrossRef

19.

Ding, C., Zhu, H., Sun, G., Zhou, Y., Zuo, X.: Chaotic characteristics and attractor evolution of friction noise during friction process. Friction 6, 47–61 (2018). https://doi.org/10.1007/4054-017-0161-yCrossRef

20.

Wang, D.W., Mo, J.L., Ouyang, H., Zhou, Z.R.: Improving dynamic and tribological behaviours by means of a Mn-Cu damping alloy with grooved surface features. Tribol. Lett. 66, 67 (2018). https://doi.org/10.1007/s11249-018-1019-9CrossRef

21.

Zhang, P., Zhang, L., Wei, D., Wu, P., Cao, J., Shijia, C.: The synergistic effect of Cr and CrFe particles on the braking behavior of Cu-based powder metallurgy brake pads. Tribol. Trans. 62, 1072–1085 (2019). https://doi.org/10.1080/10402004.2019.1648914CrossRef

22.

Vladescu, S.C., Olver, A.V., Pegg, I.G., Reddyhoff, T.: The effects of surface texture in reciprocating contacts—an experimental study. Tribol. Int. 82, 28–42 (2015). https://doi.org/10.1016/j.triboint.2014.09.015CrossRef

23.

Zenebe Segu, D., Hwang, P.: Friction control by multi-shape textured surface under pin-on-disc test. Tribol. Int. 91, 111–117 (2015). https://doi.org/10.1016/j.triboint.2015.06.028CrossRef

24.

Xing, Y., Deng, J., Feng, X., Yu, S.: Effect of laser surface texturing on Si3N4/TiC ceramic sliding against steel under dry friction. Mater. Des. 1980–2015(52), 234–245 (2013). https://doi.org/10.1016/j.matdes.2013.05.077CrossRef

25.

Wu, Y.K., Mo, J.L., Tang, B., Xu, J.W., Huang, B., Xiang, Z.Y.: Tribological and dynamical analysis of a brake pad with multiple blocks for a high-speed train. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 234, 1771–1788 (2019). https://doi.org/10.1177/1350650119896456CrossRef

26.

Xiao, Y., Zhang, Z., Yao, P., Fan, K., Deng, M.: Mechanical and tribological behaviors of copper metal matrix composites for brake pads used in high-speed trains. Tribol. Int. 119, 585–592 (2018). https://doi.org/10.1016/j.triboint.2017.11.038CrossRef

27.

Wang, F., Gu, K.K., Wang, W.J.: Study on braking tribological behaviors of brake shoe material under the wet condition. Wear 342–343, 262–269 (2015). https://doi.org/10.1016/j.wear.2015.09.003CrossRef

28.

Shi, L.B., Wang, F., Ma, L., Liu, Q.Y., Guo, J., Wang, W.J.: Study of the friction and vibration characteristics of the braking disc/pad interface under dry and wet conditions. Tribol. Int. 127, 533–544 (2018). https://doi.org/10.1016/j.triboint.2018.07.012CrossRef

29.

Hoffmann, N.P., Gaul, L.: Friction induced vibrations of brakes: research fields and activities. Sae Tech. Pap. (2008). https://doi.org/10.4271/2008-01-2579CrossRef

30.

Massi, F., Berthier, Y., Baillet, L.: Contact surface topography and system dynamics of brake squeal. Wear 265, 1784–1792 (2008). https://doi.org/10.1016/j.wear.2008.04.049CrossRef

31.

Majcherczak, D., Dufrénoy, P., Naït-Abdelaziz, M.: Third body influence on thermal friction contact problems: application to braking. J. Tribol. 127, 89–95 (2007). https://doi.org/10.1115/1.1757490CrossRef

32.

Graf, M., Ostermeyer, G.P.: Instabilities in the sliding of continua with surface inertias: an initiation mechanism for brake noise. J. Sound Vib. 330, 5269–5279 (2011). https://doi.org/10.1016/j.jsv.2011.06.002CrossRef

33.

Tonazzi, D., Passafiume, M., Papangelo, A., Hoffmann, N., Massi, F.: Numerical and experimental analysis of the bi-stable state for frictional continuous system. Nonlinear Dyn. 102, 1361–1374 (2020). https://doi.org/10.1007/s11071-020-05983-yCrossRef

34.

Lee, S., Jang, H.: Effect of plateau distribution on friction instability of brake friction materials. Wear 400–401, 1–9 (2018). https://doi.org/10.1016/j.wear.2017.12.015CrossRef

35.

Stender, M., Tiedemann, M., Spieler, D., Schoepflin, D., Hoffmann, N., Oberst, S.: Deep learning for brake squeal: brake noise detection, characterization and prediction. Mech. Syst. Signal Process. 149, 107181 (2021). https://doi.org/10.1016/j.ymssp.2020.107181CrossRef

36.

Massi, F., Baillet, L., Giannini, O., Sestieri, A.: Brake squeal: Linear and nonlinear numerical approaches. Mech. Syst. Signal Process. 21, 2374–2393 (2007). https://doi.org/10.1016/j.ymssp.2006.12.008CrossRef

37.

Tison, T., Heussaff, A., Massa, F., Turpin, I., Nunes, R.F.: Improvement in the predictivity of squeal simulations: uncertainty and robustness. J. Sound Vib. 333, 3394–3412 (2014). https://doi.org/10.1016/j.jsv.2014.03.011CrossRef

38.

Sinou, J.J., Besset, S., Lenoir, D.: Some unexpected thermal effects on squeal events observed on the experimental bench FIVE@ECL. Mech. Syst. Signal Process. 160, 107867 (2021). https://doi.org/10.1016/j.ymssp.2021.107867CrossRef

39.

Bergman, F., Eriksson, M., Jacobson, S.: Influence of disc topography on generation of brake squeal. Wear 225–229, 621–628 (1999). https://doi.org/10.1016/S0043-1648(99)00064-2CrossRef

40.

Seol, C.J., Jongyun, J., Woo, K.H., Sun, L.H., Woo, P.Y., Junghwan, L.: Development of noise propensity index (NPI) for robust brake friction. SAE Int. J. Commer. Veh. 10, 589–595 (2017). https://doi.org/10.4271/2017-01-2529CrossRef

41.

Zhu, Z.Y., Mo, J.L., Wang, D.W., Zhao, J., Zhu, M.H., Zhou, Z.R.: Study on the correlation between dynamical behavior and friction/wear mechanism under the effect of grooves. J. Mater. Eng. Perform. 27(6), 2875–2884 (2018). https://doi.org/10.1007/s11665-018-3373-zCrossRef

42.

Tonazzi, D., Massi, F., Baillet, L., Culla, A., Di Bartolomeo, M., Berthier, Y.: Experimental and numerical analysis of frictional contact scenarios: from macro stick-slip to continuous sliding. Meccanica 50(3), 1–16 (2014). https://doi.org/10.1007/s11012-014-0010-2CrossRef

43.

Wang, D.W., Mo, J.L., Zhu, Z.Y., Ouyang, H., Zhu, M.H., Zhou, Z.R.: Debris trapping and space-varying contact via surface texturing for enhanced noise performance. Wear 396–397, 86–97 (2018). https://doi.org/10.1016/j.wear.2017.11.013CrossRef

44.

Xiang, Z.Y., Mo, J.L., Ouyang, H., Massi, F., Tang, B., Zhou, Z.R.: Contact behaviour and vibrational response of a high-speed train brake friction block. Tribol. Int. 152, 106540 (2020). https://doi.org/10.1016/j.triboint.2020.106540CrossRef

45.

Fan, Z.Y., Xiang, Z.Y., Tang, B., Chen, W., Qian, H.H., Mo, J.L.: Effect of surface modification on the tribological properties of friction blocks in high-speed train brake systems. Tribol. Lett. 69, 27 (2021). https://doi.org/10.1007/s11249-021-01402-4CrossRef

46.

Kim, J.W., Joo, B.S., Jang, H.: The effect of contact area on velocity weakening of the friction coefficient and friction instability: a case study on brake friction materials. Tribol. Int. 135, 38–45 (2019). https://doi.org/10.1016/j.triboint.2019.02.034CrossRef

47.

Yao, P.P., Xiao, Y.L., Deng, J.W.: Study on space copper-based powder metallurgy friction material and its tribological properties. Adv. Mater. Res. 284–286, 479–487 (2011). https://doi.org/10.4028/www.scientific.net/AMR.284-286.479CrossRef

48.

Wu, W., Shao, T.M., Chen, G.M.: Influence of groove surface texture on temperature rise under dry sliding friction. Sci China Technol. Sci. 02, 5–12 (2016). https://doi.org/10.1007/s11431-015-5920-2CrossRef

49.

Chen, G.X., Zhou, Z.R.: A self-excited vibration model based on special elastic vibration modes of friction systems and time delays between the normal and friction forces: a new mechanism for squealing noise. Wear 262, 1123–1139 (2007). https://doi.org/10.1016/j.wear.2006.11.014CrossRef

50.

Wang, D.W., Mo, J.L., Zhang, Q., Zhao, J., Ouyang, H., Zhou, Z.R.: The effect of the grooved elastic damping component in reducing friction-induced vibration. Tribol. Int. 110, 264–277 (2017). https://doi.org/10.1016/j.triboint.2017.02.031CrossRef

51.

Tonazzi, D., Massi, F., Culla, A., Baillet, L., Fregolent, A., Berthier, Y.: Instability scenarios between elastic media under frictional contact. Mech. Syst. Signal Process. 40, 754–766 (2013). https://doi.org/10.1016/j.ymssp.2013.05.022CrossRef

52.

Tonazzi, D., Massi, F., Baillet, L., Brunetti, J., Berthier, Y.: Interaction between contact behaviour and vibrational response for dry contact system. Mech. Syst. Signal Process. 110, 110–121 (2018). https://doi.org/10.1016/j.ymssp.2018.03.020CrossRef

Titel: The Influence of Friction Blocks Connection Configuration on High-Speed Railway Brake Systems Performance
verfasst von: J. B. Yin
Y. K. Wu
C. Lu
W. Chen
J. L. Mo
Z. R. Zhou
Publikationsdatum: 01.12.2021
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 4/2021
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-021-01497-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2021

Investigation of the Interaction, Rheological and Tribological Properties of Bis(pinacolato)diboron with Lithium Grease

A Quantitative Determination of Minimum Film Thickness in Elastohydrodynamic Circular Contacts

Tribological Properties of the Functionalized Graphene/Montmorillonite Nanosheets as a Lubricant Additive

The Effect of Additive Chemical Structure on the Tribofilms Derived from Varying Molybdenum-Sulfur Chemistries

Activation Volume in Shear-Driven Chemical Reactions

Understanding the Tribological Behavior of Graded (Cr,Al)N + Mo:S in Fluid-Free Friction Regime

Premium Partner

Marktübersichten