nach oben

Rock Mechanics and Rock Engineering

Erschienen in:

25.01.2022 | Original Paper

Time-Dependent Stability Analyses of Side-Exposed Backfill Considering Creep of Surrounding Rock Mass

verfasst von: Ruofan Wang, Li Li

Erschienen in: Rock Mechanics and Rock Engineering | Ausgabe 4/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The stability of side-exposed backfill is essential to ensure a successful mining operation. Until now, it has been analyzed without considering the creep of rock mass. In practice, stope excavation and backfilling are always scheduled with different time during which fill mechanical properties can evolve and rocks exhibit more or less creep deformation. In this study, time-dependent stability and minimum required cohesion (c_min) of side-exposed backfill associated with the creep of surrounding rock mass are, for the first time, analyzed through numerical modeling with FLAC^3D. A distinction is made between the cohesion at failure and c_min. Results show that the empty time of primary stope does not significantly affect the stability and c_min. When mine depth is small and the rock exhibits little creep, it deserves to wait longer time before adjacent extraction for the backfill to gain more strength. When the mine depth is large or/and the rock exhibits heavy creep, the instability of side-exposed backfill can be dictated by crushing failure. A stronger backfill means also a harder backfill, which absorbs larger compressive stress and is more prone to be crushed. In this condition, a softer backfill can be better through the use of lower binder content or/and with a shorter curing time. The adjacent secondary stope should be filled as soon as possible to avoid failure of side-exposed backfill. More simulations were done on the effects of stope geometry and mechanical properties of backfill and rock mass on the stability and c_min of side-exposed backfill.

Vorheriger Artikel Influence of Notch Geometry on the Rock Fracture Toughness Measurement Using the ISRM Suggested Semi-Circular Bend (SCB) Method

Nächster Artikel Influence of Microroughness on Stick–Slip Characteristics of Fault Under Constant Normal Stiffness

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Amitrano D, Helmstetter A (2006) Brittle creep, damage, and time to failure in rocks. J Geophys Res Solid Earth 111:1–17. https://doi.org/10.1029/2005jb004252CrossRef

Askew J, McCarthy PL, Fitzgerald DJ (1978) Backfill research for pillar extraction at ZC/NBHC. In: Proceedings of 12th Canadian rock mechanics symposium. Institute of Mining and Metallurgy, Sudbury, pp 100–110. https://doi.org/10.1016/0148-9062(80)90403-9

Aubertin M, Li L, Arnoldi S, Belem T, Bussière B, Benzaazoua M, Simon R (2003) Interaction between backfill and rock mass in narrow stopes. In: Proceedings of 12th panamerican conference on soil mechanics and geotechnical engineering and 39th US rock mechanics symposium, Cambridge, USA, pp 1157–1164

Aubertin JD, Hoentzsch S, Diederichs MS, Milton H (2018) Influence of the creep law on pillar response based on numerical simulations of an underground salt mine. In: Proceedings of 52nd US rock mechanics/geomechanics symposium, paper ARMA-2018-1331. American Rock Mechanics Association, Seattle, Washington

Aydan Ö, Ito T, Özbay U, Kwasniewski M, Shariar K, Okuno T, Özgenoğlu A, Malan DF, Okada T (2014) ISRM suggested methods for determining the creep characteristics of rock. Rock Mech Rock Eng 47(1):275–290. https://doi.org/10.1007/978-3-319-07713-0_9CrossRef

Aydan Ö, Kawamoto T (2000) The assessment of mechanical properties of rock masses through RMR rock classification system. In: Proceedings of the GeoEng 2000 symposium, Sydney, Australia

Barla G, Bonini M, Debernardi D (2010) Time dependent deformations in squeezing tunnels. In: Proceedings of the 12th ISSMGE international conference of international association for computer methods and advances in geomechanics, Goa, India, pp 4265–4275

Behera SK, Mishra D, Singh P, Mishra K, Mandal SK, Ghosh CN, Kumar R, Mandal PK (2021) Utilization of mill tailings, fly ash and slag as mine paste backfill material: Review and future perspective. Constr Build Mater 309:125120. https://doi.org/10.1016/j.conbuildmat.2021.125120CrossRef

Belem T, Benzaazoua M, Bussière B (2000) Mechanical behaviour of cemented paste backfill. In: Proceedings of 53rd Canadian geotechnical conference. Canadian Geotechnical Society, Montreal, pp 373–380

Bérest P, Gharbi H, Brouard B, Brückner D, DeVries K, Hévin G, Hofer G, Spiers C, Urai J (2019) Very slow creep tests on salt samples. Rock Mech Rock Eng 52(9):2917–2934. https://doi.org/10.1007/s00603-019-01778-9CrossRef

Bieniawski ZT (1989) Engineering rock mass classifications: a complete manual for engineers and geologists in mining, civil, and petroleum engineering. Wiley, New York

Bonini M, Debernardi D, Barla M, Barla G (2009) The mechanical behaviour of clay shales and implications on the design of tunnels. Rock Mech Rock Eng 42(2):361–388. https://doi.org/10.1007/s00603-007-0147-6CrossRef

Boulianne M, Simon R, Aubertin M (2004) A numerical investigation of the creep (viscoplastic) behaviour of circular opening and pillar in rock salt. In: Proceedings of 57th Canadian geotechnical conference and the 5th joint CGS-IAH conference, Quebec City, pp 25–32

Brantut N, Heap M, Meredith P, Baud P (2013) Time-dependent cracking and brittle creep in crustal rocks: a review. J Struct Geol 52:17–43. https://doi.org/10.1016/j.jsg.2013.03.007CrossRef

Cao S, Yilmaz E, Song W (2018) Evaluation of viscosity, strength and microstructural properties of cemented tailings backfill. Minerals 8(8):352. https://doi.org/10.3390/min8080352CrossRef

Chin HP, Rogers JD (1987) Creep parameters of rocks on an engineering scale. Rock Mech Rock Eng 20(2):137–146. https://doi.org/10.1007/bf01410044CrossRef

Coulthard MA (1980) Numerical analysis of fill pillar stability: Three dimensional linearly elastic finite element calculations. Division of Applied Geomechanics, CSIRO, Sydney. https://doi.org/10.25919/5e6bca5394098CrossRef

Coulthard MA, Dight PM (1980) Numerical analysis of failed cemented fill at ZC/NBHC Mine, Broken Hill. In: Proceedings of 3rd Australia-New Zealand conference on geomechanics. Institution of Professional Engineers New Zealand, Wellington, pp 145–151. https://doi.org/10.1016/0148-9062(82)91476-0

Cristescu N, Hunsche U (1998) Time effects in rock mechanics. Wiley, New York

Darling P (2011) SME mining engineering handbook, 3rd edn. Society for Mining, Metallurgy and Exploration, Denver

Dusseault MB, Fordham CJ (1993) Time-dependent behavior of rocks. In: Hudson JA (ed) Rock testing and site characterization, 1st edn. Pergamon, Oxford, pp 119–149. https://doi.org/10.1016/b978-0-08-042066-0.50013-6CrossRef

El Mkadmi N, Aubertin M, Li L (2014) Effect of drainage and sequential filling on the behavior of backfill in mine stopes. Can Geotech J 51(1):1–15. https://doi.org/10.1139/cgj-2012-0462CrossRef

Fall M, Nasir O (2010) Mechanical behaviour of the interface between cemented tailings backfill and retaining structures under shear loads. Geotech Geol Eng 28:779–790. https://doi.org/10.1007/s10706-010-9338-0CrossRef

Fang K, Fall M (2018) Effects of curing temperature on the shear behaviour of cemented paste backfill–rock interface. Int J Rock Mech Min Sci 112:184–192. https://doi.org/10.1016/j.ijrmms.2018.10.024CrossRef

Fang K, Fall M (2019) Chemically induced changes in the shear behaviour of the interface between rock and tailings backfill undergoing cementation. Rock Mech Rock Eng 52:3047–3062. https://doi.org/10.1007/s00603-019-01757-0CrossRef

Fang K, Fall M (2020) Shear behavior of the interface between rock and cemented backfill: effect of curing stress, drainage condition and backfilling rate. Rock Mech Rock Eng 53:325–336. https://doi.org/10.1007/s00603-019-01909-2CrossRef

Fang K, Fall M (2021) Shear behaviour of rock–tailings backfill interface: effect of cementation, rock type, and rock surface roughness. Geotech Geol Eng 39:1753–1770. https://doi.org/10.1007/s10706-020-01586-xCrossRef

Feng XT, Chen BR, Yang C, Zhou H (2006) Intelligent analysis of rheological characteristic of rock materials. In: Proceedings of EUROCK 2006—Multiphysics coupling and long term behaviour in rock mechanics. Taylor & Francis Group, London, pp 275–280

Ghirian A, Fall M (2015) Coupled behavior of cemented paste backfill at early ages. Geotech Geol Eng 33(5):1141–1166. https://doi.org/10.1007/s10706-015-9892-6CrossRef

Ghirian A, Fall M (2016) Long-term coupled behaviour of cemented paste backfill in load cell experiments. Geomech Geoengin 11(4):237–251. https://doi.org/10.1080/17486025.2016.1145256CrossRef

Godbout J, Bussière B, Belem T (2007) Evolution of cemented paste backfill saturated hydraulic conductivity at early curing time. In: Proceedings of 60th Canadian geotechnical conference and the 8th joint CGS/IAH-CNC groundwater conference, Ottawa, pp 2230–2236

Grabinsky MW, Bawden WF (2007) In situ measurements for geomechanical design of cemented paste backfill systems. In: Proceedings of 9th international symposium on mining with backfill. Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, pp 1–8

Griggs D (1939) Creep of rocks. J Geol 47(3):225–251. https://doi.org/10.1086/624775CrossRef

Guler G (1998) Analysis of the rock mass behaviour as associated with Ventersdorp Contact Reef stopes, South Africa. Masters Dissertation, University of the Witwatersrand, Johannesburg

Hao S, Liu C, Wang Y, Chang F (2017) Scaling law of average failure rate and steady-state rate in rocks. Pure Appl Geophys 174(6):2199–2215. https://doi.org/10.1007/s00024-017-1523-0CrossRef

Hardy HR, Kim RY, Stefanko R, Wang YJ (1969) Creep and microseismic activity in geologic materials. In: Proceedings of the 11th US symposium on rock mechanics. American Rock Mechanics Association, Berkeley, pp 377–412

Hartman HL (1992) SME mining engineering handbook, 2nd edn. Society for Mining, Metallurgy, and Exploration, Littleton

Hasanpour R, Rostami J, Barla G (2015) Impact of advance rate on entrapment risk of a double-shielded TBM in squeezing ground. Rock Mech Rock Eng 48(3):1115–1130. https://doi.org/10.1007/s00603-014-0645-2CrossRef

Hassani F, Archibald J (1998) Mine backfill. Canadian Institute of Mine, Metallurgy and Petroleum, Montréal

Heap MJ, Baud P, Meredith PG (2009) Influence of temperature on brittle creep in sandstones. Geophys Res Lett 36(19):L19305. https://doi.org/10.1029/2009gl039373CrossRef

Hoek E, Brown ET (1997) Practical estimates of rock mass strength. Int J Rock Mech Min Sci 34(8):1165–1186. https://doi.org/10.1016/s1365-1609(97)80069-xCrossRef

Hughes PB (2008) Performance of paste fill fences at Red Lake Mine. Masters Dissertation, University of British Columbia, Vancouver

Innocente JC, Paraskevopoulou C, Diederichs MS (2021) Estimating the long-term strength and time-to-failure of brittle rocks from laboratory testing. Int J Rock Mech Min Sci 147:104900. https://doi.org/10.1016/j.ijrmms.2021.104900CrossRef

Itasca, (2013) FLAC3D—Fast lagrangian analysis of continua in 3 dimensions, user’s guide, version 5.01. Itasca Consulting Group, Minneapolis

Jaeger JC (1969) Elasticity, fracture and flow: with engineering and geological applications. Chapman and Hall, London

Jafari M, Shahsavari M, Grabinsky M (2021) Drained triaxial compressive shear response of cemented paste backfill (CPB). Rock Mech Rock Eng 54(6):3309–3325. https://doi.org/10.1007/s00603-021-02464-5CrossRef

Kamali-Asl A, Ghazanfari E, Newell P, Stevens M (2018) Elastic, viscoelastic, and strength properties of Marcellus Shale specimens. J Pet Sci Eng 171:662–679. https://doi.org/10.1016/j.petrol.2018.05.074CrossRef

Keita AMT, Jahanbakhshzadeh A, Li L (2021) Numerical analysis of the stability of arched sill mats made of cemented backfill. Int J Rock Mech Min Sci 140:104667. https://doi.org/10.1016/j.ijrmms.2021.104667CrossRef

King RG, Jager AJ, Roberts MKC, Turner PA (1989) Rock mechanics aspects of stoping without back-area support. CSIR, research report, Pretoria

Lajtai EZ, Schmidtke RH (1986) Delayed failure in rock loaded in uniaxial compression. Rock Mech Rock Eng 19(1):11–25. https://doi.org/10.1007/bf01043444CrossRef

Li L (2014a) Generalized solution for mining backfill design. Int J Geomech 14(3):04014006. https://doi.org/10.1061/(asce)gm.1943-5622.0000329CrossRef

Li L (2014b) Analytical solution for determining the required strength of a side-exposed mine backfill containing a plug. Can Geotech J 51(5):508–519. https://doi.org/10.1139/cgj-2013-0227CrossRef

Li L, Aubertin M (2011) Limit equilibrium analysis for the design of backfilled stope barricades made of waste rock. Can Geotech J 48(11):1713–1728. https://doi.org/10.1139/t11-063CrossRef

Li L, Aubertin M (2012) A modified solution to assess the required strength of exposed backfill in mine stopes. Can Geotech J 49(8):994–1002. https://doi.org/10.1139/t2012-056CrossRef

Li L, Aubertin M (2014) An improved method to assess the required strength of cemented backfill in underground stopes with an open face. Int J Min Sci Technol 24(4):549–558. https://doi.org/10.1016/j.ijmst.2014.05.020CrossRef

Li D, Du S, Zhang C, Mao D, Ruan B (2021) Time-dependent deformation behavior of completely weathered granite subjected to wetting immersion. Rock Mech Rock Eng. https://doi.org/10.1007/s00603-021-02615-8CrossRef

Li L, Aubertin M, Simon R, Bussière B, Belem T (2003) Modeling arching effects in narrow backfilled stopes with FLAC. In: Proceedings of 3rd international symposium on FLAC and FLAC3D numerical modelling in geomechanics, Sudbury, pp 211–219

Liu G, Li L, Yang X, Guo L (2016a) Stability analyses of vertically exposed cemented backfill: a revisit to Mitchell’s physical model tests. Int J Min Sci Technol 26(6):1135–1144. https://doi.org/10.1016/j.ijmst.2016.09.024CrossRef

Liu G, Li L, Yang X, Guo L (2016b) A numerical analysis of the stress distribution in backfilled stopes considering nonplanar interfaces between the backfill and rock walls. Int J Geotech Eng 10(3):271–282. https://doi.org/10.1080/19386362.2015.1132123CrossRef

Liu G, Li L, Yang X, Guo L (2018) Required strength estimation of a cemented backfill with the front wall exposed and back wall pressured. Int J Min Miner Eng 9(1):1–20. https://doi.org/10.1504/ijmme.2018.091214CrossRef

Lyu C, Liu J, Ren Y, Liang C, Liao Y (2021) Study on very long-term creep tests and nonlinear creep-damage constitutive model of salt rock. Int J Rock Mech Min Sci 146:104873. https://doi.org/10.1016/j.ijrmms.2021.104873CrossRef

Ma L, Wang Y, Wang M, Xue B, Duan L (2021) Mechanical properties of rock salt under combined creep and fatigue. Int J Rock Mech Min Sci 141:104654. https://doi.org/10.1016/j.ijrmms.2021.104654CrossRef

Malan DF (1999) Time-dependent behaviour of deep level tabular excavations in hard rock. Rock Mech Rock Eng 32(2):123–155. https://doi.org/10.1007/s006030050028CrossRef

Malan DF, Vogler UW, Drescher K (1997) Time-dependent behaviour of hard rock in deep level gold mines. J South Afr Inst Min Metall 97(3):135–147

Mansouri H, Ajalloeian R (2018) Mechanical behavior of salt rock under uniaxial compression and creep tests. Int J Rock Mech Min Sci 110:19–27. https://doi.org/10.1016/j.ijrmms.2018.07.006CrossRef

Mitchell RJ (1986) Centrifuge model tests on backfill stability. Can Geotech J 23(3):341–345. https://doi.org/10.1139/t86-048CrossRef

Mitchell RJ (1989) Model studies on the stability of confined fills. Can Geotech J 26(2):210–216. https://doi.org/10.1139/t89-030CrossRef

Mitchell RJ, Wong BC (1982) Behaviour of cemented tailings sands. Can Geotech J 19(3):289–295. https://doi.org/10.1139/t82-035CrossRef

Mitchell RJ, Olsen RS, Smith JD (1982) Model studies on cemented tailings used in mine backfill. Can Geotech J 19(1):14–28. https://doi.org/10.1139/t82-002CrossRef

Nasir O, Fall M (2008) Shear behaviour of cemented pastefill–rock interfaces. Eng Geol 101(3):146–153. https://doi.org/10.1016/j.enggeo.2008.04.010CrossRef

Nejati HR, Ghazvinian A, Moosavi SA, Sarfarazi V (2014) On the use of the RMR system for estimation of rock mass deformation modulus. Bull Eng Geol Environ 73(2):531–540. https://doi.org/10.1007/s10064-013-0522-3CrossRef

Ngwenya BT, Main IG, Elphick SC, Crawford BR, Smart BGD (2001) A constitutive law for low-temperature creep of water-saturated sandstones. J Geophys Res Solid Earth 106(B10):21811–21826. https://doi.org/10.1029/2001jb000403CrossRef

Pałac-Walko B, Pytel W (2014) The effect of the presence of salt formations above extracted copper ore as determined by numerical modelling. In: Proceedings of the seventh international conference on deep and high stress mining. Australian Centre for Geomechanics, Perth, pp 409–420. https://doi.org/10.36487/acg_rep/1410_27_pytel

Paraskevopoulou C, Diederichs M (2018) Analysis of time-dependent deformation in tunnels using the Convergence-Confinement Method. Tunn Undergr Space Technol 71:62–80. https://doi.org/10.1016/j.tust.2017.07.001CrossRef

Paraskevopoulou C, Perras M, Diederichs M, Loew S, Lam T, Jensen M (2018) Time-dependent behaviour of brittle rocks based on static load laboratory tests. Geotech Geol Eng 36(1):337–376. https://doi.org/10.1007/s10706-017-0331-8CrossRef

Pierce ME (1999) Laboratory and numerical analysis of the strength and deformation behaviour of paste backfill. Masters Dissertation, Queen’s University

Potvin Y, Thomas E, Fourie A (2005) Handbook on mine fill. Australian Centre for Geomechanics, Perth

Qi C, Fourie A (2019) Numerical investigation of the stress distribution in backfilled stopes considering creep behaviour of rock mass. Rock Mech Rock Eng 52(9):3353–3371. https://doi.org/10.1007/s00603-019-01781-0CrossRef

Raffaldi MJ, Seymour JB, Richardson J, Zahl E, Board M (2019) Cemented paste backfill geomechanics at a narrow-vein underhand cut-and-fill mine. Rock Mech Rock Eng 52(12):4925–4940. https://doi.org/10.1007/s00603-019-01850-4CrossRef

Rankine RMA (2004) The geotechnical characterisation and stability analysis of BHP Billiton’s Cannington Mine paste fill. Ph.D. Dissertation, James Cook University

Sainsbury DP, Urie R (2007) Stability analysis of horizontal and vertical paste fill exposures at the Raleigh Mine. In: Proceedings of 9th international symposium on mining with backfill. Canadian Institute of Mining, Metallurgy and Petroleum, Montreal

Salencon J (1969) Contraction quasi-statique d’une cavité a symétrie sphérique ou cylindrique dans un milieu elastoplastique. Ann Ponts Chaussées 4:231–236

Sharifzadeh M, Tarifard A, Moridi MA (2013) Time-dependent behavior of tunnel lining in weak rock mass based on displacement back analysis method. Tunn Undergr Space Technol 38:348–356. https://doi.org/10.1016/j.tust.2013.07.014CrossRef

Sulem J, Panet M, Guenot A (1987) Closure analysis in deep tunnels. Int J Rock Mech Min Sci Geomech Abstr 24(3):145–154. https://doi.org/10.1016/0148-9062(87)90522-5CrossRef

Taheri SR, Pak A (2020) Casing failure in salt rock: numerical investigation of its causes. Rock Mech Rock Eng 53:3903–3918. https://doi.org/10.1007/s00603-020-02161-9CrossRef

Thompson BD, Grabinsky MW, Bawden WF, Counter DB (2009) In-situ measurements of cemented paste backfill in long-hole stopes. In: Proceedings of the 3rd CANUS rock mechanics symposium, Toronto, pp 197–198

Ting B, Stone D, Ruptash K, Fabien B (2021) Using paste backfill for stabilizing underground stopes at the Giant Mine remediation project. In: Proceedings of the 13th international symposium on mining with backfill, Katowice, Poland, pp 44–52

Wang R, Li L, Simon R (2019) A model for describing and predicting the creep strain of rocks from the primary to the tertiary stage. Int J Rock Mech Min Sci 123:104087. https://doi.org/10.1016/j.ijrmms.2019.104087CrossRef

Wang R, Zeng F, Li L (2021) Stability analyses of side-exposed backfill considering mine depth and extraction of adjacent stope. Int J Rock Mech Min Sci 142:104735. https://doi.org/10.1016/j.ijrmms.2021.104735CrossRef

Wang R, Li L (2018) Burgers creep model used for describing and predicting the creep behaviour of a rock under uniaxial and triaxial compression test conditions. In: Proceedings of the 71st Canadian geotechnical conference. Canadian Geotechnical Society, Edmonton

Wang R, Li L (2019) A non-stationary power law model to predict the secondary creep rate of rocks. In: Proceedings of 8th international conference on case histories in geotechnical engineering. American Society of Civil Engineers, Philadelphia, pp 476–483. https://doi.org/10.1061/9780784482124.048

Wittke W (2014) Rock mechanics based on an anisotropic jointed rock model (AJRM). Ernst & Sohn, Berlin. https://doi.org/10.1002/9783433604281CrossRef

Xu WY, Nie WP, Zhou XQ, Shi C, Wang W, Feng SR (2011) Long-term stability analysis of large-scale underground plant of Xiangjiaba hydro-power station. J Cent South Univ 18(2):511–520. https://doi.org/10.1007/s11771-011-0725-3CrossRef

Yan B, Lai X, Jia H, Yilmaz E, Hou C (2021) A solution to the time-dependent stress distribution in suborbicular backfilled stope interaction with creeping rock. Adv Civ Eng. https://doi.org/10.1155/2021/5533980CrossRef

Yang P, Li L, Aubertin M (2017a) A new solution to assess the required strength of mine backfill with a vertical exposure. Int J Geomech 17(10):04017084. https://doi.org/10.1061/(asce)gm.1943-5622.0000975CrossRef

Yang P, Li L, Aubertin M, Brochu-Baekelmans M, Ouellet S (2017b) Stability analyses of waste rock barricades designed to retain paste backfill. Int J Geomech. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000740CrossRef

Yilmaz E (2018) Stope depth effect on field behaviour and performance of cemented paste backfills. Int J Min Reclam Environ 32(4):273–296. https://doi.org/10.1080/17480930.2017.1285858CrossRef

Zhang H, Wang Z, Zheng Y, Duan P, Ding S (2012) Study on tri-axial creep experiment and constitutive relation of different rock salt. Saf Sci 50(4):801–805. https://doi.org/10.1016/j.ssci.2011.08.030CrossRef

Zhao X, Fourie A, Qi C (2019) An analytical solution for evaluating the safety of an exposed face in a paste backfill stope incorporating the arching phenomenon. Int J Miner Metall Mater 26(10):1206–1216. https://doi.org/10.1007/s12613-019-1885-7CrossRef

Zhao K, Ma H, Yang C, Chen X, Liu Y, Liang X, Cai R (2021) Damage evolution and deformation of rock salt under creep-fatigue loading. Rock Mech Rock Eng 54:1985–1997. https://doi.org/10.1007/s00603-020-02342-6CrossRef

Titel: Time-Dependent Stability Analyses of Side-Exposed Backfill Considering Creep of Surrounding Rock Mass
verfasst von: Ruofan Wang
Li Li
Publikationsdatum: 25.01.2022
Verlag: Springer Vienna
Erschienen in: Rock Mechanics and Rock Engineering / Ausgabe 4/2022
Print ISSN: 0723-2632
Elektronische ISSN: 1434-453X
DOI: https://doi.org/10.1007/s00603-022-02776-0

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2022

The Role of Temperature in the Stress–Strain Evolution of Alpine Rock-Slopes: Thermo-Mechanical Modelling of the Cimaganda Rockslide

Microscopic Investigation of Rock Direct Tensile Failure Based on Statistical Analysis of Acoustic Emission Waveforms

Evaluation of Engineering Rock Mass Quality via Integration Between Geophysical and Rock Mechanical Parameters

Influence of Notch Geometry on the Rock Fracture Toughness Measurement Using the ISRM Suggested Semi-Circular Bend (SCB) Method

Prediction of TBM Advance Rate Considering Geotechnical and Operating Risks: An Example of the Lanzhou Long Water Conveyance Tunnel, China

Matrix–Fracture Flow Transfer in Fractured Porous Media: Experiments and Simulations