nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Tribological Properties of Natural Fibre Reinforced Polymer Composites

verfasst von : Qumrul Ahsan, Zaleha Mustafa, Siang Yee Chang

Erschienen in: Tribological Applications of Composite Materials

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this chapter, authors aim to highlight the prospect of natural fiber reinforced polymer composites (NFRPC) as tribo-materials for different engineering system. Incorporation of fibers originate from plants in polymer composite is not new as they provide environmental friendly lighter composite demanded by automative sectors where the conservation of energy is concerned. First two section gives a brief understanding on treatment of fiber surface for efficient compatibility with polymer matrix and their arrangement in composites and followed by composite fabrication for thermoset and thermoplastic composites using natural fibers. Later authors compile some published research works in order to interprete the tribo properties based on the different test parameters and composite systems impregnated by different types fibers various arrangements. Finally prospect of using hybrid polymeric composite incorporated with natural fiber and synthetic micro and Nano fillers as tribo materials is highlighted.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Tribological Evaluation of Solid Lubricant Enriched in Modified Jatropha-Based Oil as Minimum Quantity Lubrication (MQL) Oil for Composite Material

Nächstes Kapitel Friction and Wear Properties of Natural Fiber Reinforced Composites

Ahsan Q, Carron TSS, Mustafa Z (2019) On the use of nano fibrillated kenaf cellulose fiber as reinforcement in polylactic acid biocomposites. J Mech Eng Sci 13(2):4970–4988CrossRef

Aldousiri B, Shalwan A, Chin CW (2013) A review on tribological behavior of polymeric composites and future reinforcements. Adv Mater Sci Eng 8. Article ID 645923

Alshammaria FZ, Saleha KH, Yousif BF, Alajmib A, Shalwanc A, Alotaibib JG (2018) The influence of fibre orientation on tribological performance of jute fibre reinforced epoxy composites considering different mat orientations. Tribol Ind 40(3):335–348CrossRef

Anbupalani MS, Venkatachalam CD, Rathanasamy R (2020) Influence of coupling agent on altering the reinforcing efficiency of natural fibre-incorporated polymers—a review. J Reinf Plast Compos. https://doi.org/10.1177/0731684420918937CrossRef

Bajpai PK, Singh I, Madaan J (2013) Tribological behaviour of natural fiber reinforced PLA composites. Wear 297:829–840CrossRef

Bijwe J, Indumathi J (2004) Influence of fibers and solid lubricants on low amplitude oscillating wear of polyetherimide composites. Wear 257(5–6):562–572CrossRef

Boopathi L, Sampath PS, Mylsamy K (2012) Investigation of physical, chemical and mechanical properties of raw and alkali treated Borassus fruit fiber. Compos B Eng 43(8):3044–3052CrossRef

Brígida AIS, Calado VMA, Gonçalves LRB, Coelho MAZ (2010) Effect of chemical treatments on properties of green coconut fiber. Carbohydr Polym 79(4):832–838

Briscoe BJ, Friedrich K (eds) (1993) Advances in composite tribology, composite materials series, vol 8. Elsevier, Amsterdam, p 3CrossRef

Campilho RDSG (2015) Natural fiber composites. CRC Press, Boca RatonCrossRef

Catto AL, Stefani BV, Ribeiro VF, Santana RMC (2014) Influence of coupling agent in compatibility of post-consumer HDPE in thermoplastic composites reinforced with eucalyptus fiber. Mater Res 17:203–209CrossRef

Chand N, Fahim M (2008) Chapter 2 Introduction to tribology of polymer composites, Tribology of natural fiber polymer composites, Chand N, Faheem, M (eds) CRC Press and Woodhead Publishers

Chand N, Dwivedi UK (2008) Sliding wear and friction characteristics of sisal fibre reinforced polyester composites: effect of silane coupling agent and applied load. Polym Compos pp 80–84

Chand N, Dwivedi UK (2007) Influence of fiber orientation on high stress wear behavior of sisal fiber-reinforced epoxy composites. Polym Compos pp 437–441

Chang L, Friedrich K (2010) Enhancement effect of nanoparticles on the sliding wear of short fiber-reinforced polymer composites: a critical discussion of wear mechanisms. Tribol Int 43(12):2355–2364CrossRef

Chin CW, Yousif BF (2009) Potential of kenaf fibres as reinforcement for tribological applications. Wear 267:1550–1557CrossRef

Cho MH, Bahadur S (2005) Study of the tribological synergistic effects in nano CuO-filled and fiber-reinforced polyphenylene sulfide composites. Wear 258(5–6):835–845CrossRef

Edeerozey AM, Akil HM, Azhar AB, Ariffin MZ (2007) Chemical modification of kenaf fibers. Mater Lett 61(10):2023–2025CrossRef

Elkhaoulani A, Arrakhiz F, Benmoussa K, Bouhfid R, Qaiss A (2013) Mechanical and thermal properties of polymer composite based on natural fibers: Moroccan hemp fibers/polypropylene. Mater Des 49:203–208CrossRef

El-Tayeb NSM (2008a) A study on the potential of sugarcane fibers/polyester composite for tribological applications. Wear 265(1–2):223–235CrossRef

El-Tayeb NSM (2008b) Tribo-characterization of natural fibre-reinforced polymer composite material. Proc Inst Mech Eng, Part J: J Eng Tribol 222(7):935–946CrossRef

Fadzullah SSM, Mustafa Z (2016) Fabrication and processing of pineapple leaf fiber reinforced composites. In: Green approaches to biocomposite materials science and engineering. IGI Global, pp 125–147

Fadzullah SSM, Mustafa Z, Ramli SNR (2016) The effect of fiber length on the mechanical properties of pineapple leaf (PALF) fiber reinforced PLA biocomposites. Proc Mech Eng Res Day 2016:123–124

Faruk O, Bledzki AK, Fink H-P, Sain M (2012) Biocomposites reinforced with natural fibers: 2000–2010. Prog Poly Sci 37(11):1552–1596CrossRef

Friedrich K (2018) Polymer composites for tribological applications. Adv Ind Eng Polym Res 1:3–39

Friedrich K (1997) (1997). Wear performance of high temperature polymers and their composites. In: Luise RR (ed) Application of high temperature polymers. CRC Press, Boca Raton, USA, pp 221–246

Fuqua MA, Ulven CA (2008) Characterization of polypropylene/corn fiber composites with maleic anhydride grafted polypropylene. J Biobased Mater Bioenergy 2(3):258–263CrossRef

Gholampour A, Ozbakkaloglu T (2020) A review of natural fiber composites: properties, modification and processing techniques, characterization, applications. J Mater Sci, pp 1–64

Guo L, Qi H, Zhang G, Wang T, Wang Q (2017) Distinct tribological mechanisms of various oxide nanoparticles added in PEEK composite reinforced with carbon fibers. Compos A Appl Sci Manuf 97:19–30CrossRef

Guo QB, Rong MZ, Jia GL, Lau KT, Zhang MQ (2009) Sliding wear performance of nano-SiO₂/short carbon fiber/epoxy hybrid composites. Wear 266(7–8):658–665CrossRef

Hager AM, Davies M (1993) (1993). Short-fiber reinforced, high temperature resistant polymers for a wide field of tribological applications. In: Friedrich K (ed) Advances in composite tribology. Elsevier Scientific Publishers, Amsterdam, The Netherland, pp 107–157CrossRef

Hashmi SAR, Dwivedi UK, Chand N (2007) Graphite modified cotton fibre reinforced polyester composites under sliding wear conditions. Wear 262(11–12):1426–1432CrossRef

Hong CK, Kim N, Kang SL, Nah C, Lee YS, Cho BH, Ahn JH (2008) Mechanical properties of maleic anhydride treated jute fibre/polypropylene composites. Plast Rubber Compos 37(7):325–330

Jusoh MSM, Yahya MYM, Mustafa Z, Ahmad HAI (2015) Effect of layering pattern on mechanical and water absorption properties of glass/flax reinforced epoxy. Jurnal Teknologi 79:5–2

Friedrich K, Theiler G, Klein P (2018) Polymer composites for tribological applications in a range between liquid helium and room temperature. In: Sinha SK (ed) Handbook of polymer tribology. World Scientific, Singapore, p 307e343

Kakou CA, Arrakhiz FZ, Trokourey A, Bouhfid R, Qaiss A, Rodrigue D (2014) Influence of coupling agent content on the properties of high density polyethylene composites reinforced with oil palm fibers. Mater Des 63:641–649CrossRef

Karthikeyan S, Rajini N, Jawaid M, Jappes JTW, Thariq MTH, Siengchin S, Sukumaran J (2017). A review on tribological properties of natural fiber based sustainable hybrid composite. Proc IMechE Part J: J Eng Tribol 0(0) 1–19, IMechE 2017. https://doi.org/10.1177/1350650117705261

Konovalova O, Suchanek J (2012) Significance of polymer nanocomposites in triboengineering systems. In: NANOCON 2012—Conference proceedings, 4th international conference

Lilholt H, Lawther JM (2000) Natural organic fibers. In: Kelly A, Zweben C (eds) Comprehensive composite materials, vol 1. Elsevier Science, Amsterdam

Liu Y, Xie J, Wu N, Wang L, Ma Y, Tong J (2019) Influence of silane treatment on the mechanical, tribological and morphological properties of corn stalk fiber reinforced polymer composites. Tribol Int 131:398–405CrossRef

Mayandi K, Rajini N, Pitchipoo P, Jappes JTW, Rajulu AV (2018) Properties of untreated and chemically treated Cissus quadrangularis natural fibers and their composites with polyester as the matrix. Polym Compos 39(3):876–886CrossRef

Menezes PL, Rohatgi PK, Lovell MR (2011) Tribology of natural fiber reinforced polymer composites. In: ASME/STLE 2011 international joint tribology conference, American Society of Mechanical Engineers, 2011, pp 341–343

Mutlu I, Oner C, Findik F (2007) Boric acid effect in phenolic composites on tribological properties in brake linings. Mater Des 28(2):480–487CrossRef

Nam TH, Ogihara S, Tung NH, Kobayashi S (2011) Effect of alkali treatment on interfacial and mechanical properties of coir fiber reinforced poly (butylene succinate) biodegradable composites. Compos Part B: Eng 42(6):1648–1656

Narish S, Yousif BF, Rilling D (2011) Adhesive wear of thermoplastic composite based on kenaf fibres. Proc Inst Mech Eng, Part J: J Eng Tribol 225(2):101–109CrossRef

Nirmal U, Hashim J, Low KO (2012) Adhesive wear and frictional performance of bamboo fibres reinforced epoxy composite. Tribol Int 47:122–133CrossRef

Omrani E, Menezes PL, Rohatgi PK (2016) State of the art on tribological behavior of polymer matrix composites reinforced with natural fibers in the green materials world. Eng Sci Technol, Int J 19:717–736

Panda JN, Bijwe J, Pandey RK (2016) Role of treatment to graphite particles to increase the thermal conductivity in controlling tribo-performance of polymer composites. Wear 360:87–96CrossRef

Panda JN, Bijwe J, Pandey RK (2017) Attaining high tribo-performance of PAEK composites by selecting right combination of solid lubricants in right proportions. Compos Sci Technol 144:139–150CrossRef

Rajini N, Jappes JTW, Rajakarunakaran S et al (2012) Effect of processing variables on mechanical properties of montmorillonite clay/unsaturated polyester nanocomposite using Taguchi based grey relational analysis. J Polym Eng 32:555–566CrossRef

Ramli SNR, Fadzullah SHSM, Mustafa Z (2017) The effect of alkaline treatment and fiber length on pineapple leaf fiber reinforced poly lactic acid biocomposites. Jurnal Teknologi 79(5–2)

Reeves CJ, Menezes PL, Lovell MR, Jen TC (2013) Tribology of solid lubricants. In Tribology for scientists and engineers: from basics to advanced concepts, pp 447–494. https://doi.org/10.1007/978-1-4614-1945-7_13

Reinicke R, Haupert F, Friedrich K (1998) On the tribological behavior of selected, injection molded thermoplastic composites. Compos Part A Appl Sci Manuf 29:763–771CrossRef

Sampath P, Kumar VS (2019) Mechanical and tribological behaviour of treated and untreated moringa oleifera pods fiber reinforced epoxy polymer composite for packaging applications

Satov DV (2008) Additives for wood-polymer composites. In Wood-polymer composites, pp 23–40. https://doi.org/10.1533/9781845694579.23

Shalwan A, Yousif BF (2013) In state of art: mechanical and tribological behaviour of polymeric composites based on natural fibres. Mater Des 48:14–24CrossRef

Shalwan A, Yousif BF (2014) Influence of date palm fibre and graphite filler on mechanical and wear characteristics of epoxy composites. Mater Des 59:264–273CrossRef

Shao X, Liu W, Xue Q (2004) The tribological behavior of micrometer and nanometer TiO₂ particle-filled p (phthalazine ether sulfone ketone) composites. J Appl Polym Sci 92(2):906–914CrossRef

Sharma M, Sharma H, Shannigrahi S (2017) Tribology of advanced composites/biocomposites materials. In Biomedical composites. pp 413–429. https://doi.org/10.1016/b978-0-08-100752-5.00018-4

Subramanian K, Nagarajan R, De Baets P, Subramaniam S, Thangiah W, Sukumaran J (2016) Eco-friendly mono-layered PTFE blended polymer composites for dry sliding tribo-systems. Tribol Int 102:569–579CrossRef

Suresha B, Ramesh BN, Subbaya KM, Chandramohan G (2010) Mechanical and three-body abrasive wear behavior of carbon-epoxy composite with and without graphite filler. J Compos Mater 44(21):2509–2519CrossRef

Swain PTR, Biswas S (2017) Abrasive wear behaviour of surface modified jute fiber reinforced epoxy composites. Mater Res 20(3):661–674CrossRef

Valášek P, D’Amato R, Müller M, Ruggiero A (2018) Mechanical properties and abrasive wear of white/brown coir epoxy composites. Compos B Eng 146:88–97CrossRef

Walker JCF (2006) Primary wood processing: principles and practice. Springer, Berlin

Yallew TB, Kumar P, Singh I (2014) Sliding wear properties of jute fabric reinforced polypropylene composites. Procedia Eng 97:402–411CrossRef

Yousif BF (2008) Replacing of glass fibres with seed oil palm fibres for tribopolymeric composites. Tribology 2(2):99–103

Yousif BF, EI-Tayeb NSM (2008) Adhesive wear performance of T-OPRP and UT-OPRP composites. Tribol Lett 32:199–208CrossRef

Yousif BF, Leong OB, Ong LK, Jye WK (2009) The effect of treatment on tribo-performance of CFRP composites. Recent Patents Mater Sci 2:67–74CrossRef

Zhang X, Liao G, Jin Q, Feng X, Jian X (2008) On dry sliding friction and wear behavior of PPESK filled with PTFE and graphite. Tribol Int 41(3):195–201CrossRef

Zhang Z, Friedrich K (2005) Tribological characteristics of micro- and nanoparticle filled polymer composites. In: Polymer composites, pp 169–185. https://doi.org/10.1007/0-387-26213-x_10

Zhang Z, Breidt C, Chang L, Haupert F, Friedrich K (2004) Enhancement of the wear resistance of epoxy: short carbon fiber, graphite, PTFE and nano-TiO₂. Part A Appl Sci Manuf 35:1385–1392CrossRef

Zulkafli N, Malingam SD, Fadzullah SHSM, Mustafa Z, Zakaria KA, Subramonian S (2019) Effect of water absorption on the mechanical properties of cross-ply hybrid pseudo-stem banana/glass fibre reinforced polypropylene composite. Mater Res Express 6(9):095326CrossRef

Titel: Tribological Properties of Natural Fibre Reinforced Polymer Composites
verfasst von: Qumrul Ahsan
Zaleha Mustafa
Siang Yee Chang
Verlag: Springer Singapore
Buch: Tribological Applications of Composite Materials
Print ISBN: 978-981-15-9634-6

Electronic ISBN: 978-981-15-9635-3

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-981-15-9635-3_14

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht