nach oben

European Journal of Wood and Wood Products

Erschienen in:

12.08.2023 | Original Article

Tung oil improves dimensional stability of flattened bamboo

verfasst von: Tong Tang, Xiubiao Zhang, Benhua Fei

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 6/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Flattened bamboo has a higher material utilization rate and a lower content of adhesives, which exhibits enhanced stiffness and anti-hygroscopicity, compared with original bamboo. To promote flattened bamboo to be an engineering material, the dimensional stability of flattened bamboo is required to be further improved. In this study, natural tung oil was used to modify flattened bamboo under different temperatures (23–160 °C). It was found that the water-swelling and shrinkage of the flattened bamboo reduced more than 43.00% and 20.93%, respectively, after modification with tung oil at 160 °C. The tung oil film was identified to adhere to the cell lumen, intercellular space, cell wall layer and pit channel. Furthermore, many pits in vessels were shrunk, and the crystallinity of cellulose was increased during modification of flattened bamboo by tung oil treatment at 100–160 °C. Altogether, these findings suggest that tung oil improves the dimensional stability of flattened bamboo by delaying water transport in the transverse direction and retarding the bonding of water molecules to the cell wall. Additionally, tung oil modification has little impact on the visual effects of flattened bamboo.

Vorheriger Artikel Termites infestation on different Eucalyptus wood species and control using natural oil from plants

Nächster Artikel Aldehyde-amine crosslinked starch-based high-performance wood adhesive

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Arminger B, Jaxel J, Bacher M, Gindl-Altmutter W, Hansmann C (2020) On the drying behavior of natural oils used for solid wood finishing. Prog Org Coat 148:105831. https://doi.org/10.1016/j.porgcoat.2020.105831CrossRef

Bonnet M, Courtier-Murias D, Faure P, Rodts S, Care S (2017) NMR determination of sorption isotherms in earlywood and latewood of Douglas fir. Identification of bound water components related to their local environment. Holzforschung 71:481–490. https://doi.org/10.1515/hf-2016-0152CrossRef

Chen WS, Yu HP, Liu YX, Hai YF, Zhang MX, Chen P (2011) Isolation and characterization of cellulose nanofibers from four plant cellulose fibers using a chemical-ultrasonic process. Cellulose 18:433–442. https://doi.org/10.1007/s10570-011-9497-zCrossRef

Chen H, Zhang YT, Yang X, Ji H, Zhong TH, Wang G (2019a) A comparative study of the microstructure and water permeability between flattened bamboo and bamboo culm. J Wood Sci 65:64. https://doi.org/10.1186/s10086-019-1842-0CrossRef

Chen Q, Fang CH, Wang G, Ma XX, Chen ML, Zhang SQ, Dai CP, Fei BH (2019b) Hygroscopic swelling of moso bamboo cells. Cellulose 27:611–620. https://doi.org/10.1007/s10570-019-02833-yCrossRef

Chen Q, Wang G, Ma XX, Chen ML, Fang CH, Fei BH (2020) The effect of graded fibrous structure of bamboo (Phyllostachys edulis) on its water vapor sorption isotherms. Ind Crop Prod 151:112467. https://doi.org/10.1016/j.indcrop.2020.112467CrossRef

Fang CH, Jiang ZH, Sun ZJ, Liu HR, Zhang XB, Zhang R, Fei BH (2018) An overview on bamboo culm flattening. Constr Build Mater 171:65–74. https://doi.org/10.1016/j.conbuildmat.2018.03.085CrossRef

Fasina OO, Colley Z (2008) Viscosity and specific heat of vegetable oils as a function of temperature: 35 ℃ to 180℃. Int J Food Prop 11:738–746. https://doi.org/10.1080/10942910701586273CrossRef

Fu QL, Ansari F, Zhou Q, Berglund LA (2018) Wood nanotechnology for strong, mesoporous, and hydrophobic biocomposites for selective separation of oil/water mixtures. ACS Nano 12:2222–2230. https://doi.org/10.1021/acsnano.8b00005CrossRefPubMed

Gao ZQ, Huang RF, Lu JX, Chen ZJ, Guo F, Zhan TY (2016) Sandwich compression of wood: control of creating density gradient on lumber thickness and properties of compressed wood. Wood Sci Technol 50:833–844. https://doi.org/10.1007/s00226-016-0824-2CrossRef

He ZB, Qian J, Qu LJ, Yan N, Yi SL (2019) Effects of tung oil treatment on wood hygroscopicity, dimensional stability and thermostability. Ind Crop Prod 140:111647. https://doi.org/10.1016/j.indcrop.2019.111647CrossRef

Herzele S, van Herwijnen HWG, Edler M, Gindl-Altmutter W, Konnerth J (2018) Cell-layer dependent adhesion differences in wood bonds. Compos Part A Appl S 114:21–29. https://doi.org/10.1016/j.compositesa.2018.07.037CrossRef

Hosseinaei O, Wang SQ, Enayati AA, Rials TG (2012) Effects of hemicellulose extraction on properties of wood flour and wood-plastic composites. Compos Part A Appl S 43:686–694. https://doi.org/10.1016/j.compositesa.2012.01.007CrossRef

Jiang F, Li T, Li YJ, Zhang Y, Gong A, Dai JQ, Hitz E, Luo W, Hu LB (2018) Wood-based nanotechnologies toward sustainability. Adv Mater 30:1703453. https://doi.org/10.1002/adma.201703453CrossRef

Kulasinski K, Guyer R, Derome D, Carmeliet J (2015) Water adsorption in wood microfibril-hemicellulose system: role of the crystalline-amorphous interface. Biomacromol 16:2972–2978. https://doi.org/10.1021/acs.biomac.5b00878CrossRef

Lee CH, Yang TH, Cheng YW, Lee CJ (2018) Effects of thermal modification on the surface and chemical properties of moso bamboo. Constr Build Mater 178:59–71. https://doi.org/10.1016/j.conbuildmat.2018.05.099CrossRef

Li MF, Shen Y, Sun JK, Bian J, Chen CZ, Sun RC (2015) Wet torrefaction of bamboo in hydrochloric acid solution by microwave heating. ACS Sustain Chem Eng 3:2022–2029. https://doi.org/10.1021/acssuschemeng.5b00296CrossRef

Li XJ, Du HQ, Mao FJ, Zhou GM, Xing LQ, Liu TY, Han N, Liu EB, Ge HL, Liu YL, Li YG, Zhu DE, Zheng JL, Dong LF, Zhang M (2020) Mapping spatiotemporal decisions for sustainable productivity of bamboo forest land. Land Degrad Dev 31:939–958. https://doi.org/10.1002/ldr.3509CrossRef

Lian CP, Liu R, Cheng XF, Zhang SQ, Luo JJ, Yang SM, Liu XM, Fei BH (2019) Characterization of the pits in parenchyma cells of the moso bamboo [Phyllostachys edulis (Carr.) J. Houz.] culm. Holzforschung 73:629–636. https://doi.org/10.1515/hf-2018-0236CrossRef

Lian CP, Liu R, Luo JJ, Yang F, Zhang SQ, Fei BH (2020) The morphological characteristics and classification of vascular parenchyma cells in bamboo. Phyllostachys edulis (Carr.). J Houz Holzforschung 74:829–838. https://doi.org/10.1515/hf-2019-0241CrossRef

Liu R, Zhang SQ, Semple K, Lian CP, Chen ML, Luo JJ, Yang F, Dai CP, Fei BH (2021) Precise microcasting revealing the connectivity of bamboo pore network. Ind Crop Prod 170:113787. https://doi.org/10.1016/j.indcrop.2021.113787CrossRef

Lou ZC, Wang QY, Sun W, Zhao YH, Wang XZ, Liu XR, Li YJ (2021) Bamboo flattening technique: a literature and patent review. Eur J Wood Prod 79:1035–1048. https://doi.org/10.1007/s00107-021-01722-1CrossRef

Luan Y, Ma YF, Liu LT, Fei BH, Fang CH (2022) A novel bamboo engineering material with uniform density, high strength, and high utilization rate. Ind Crop Prod 184:115045. https://doi.org/10.1016/j.indcrop.2022.115045CrossRef

Luo JJ, Lian CP, Liu R, Zhang SQ, Yang F, Fei BH (2019) Comparison of metaxylem vessels and pits in four sympodial bamboo species. Sci Rep 9:10876. https://doi.org/10.1038/s41598-019-47419-7CrossRefPubMedPubMedCentral

Meng FD, Yu YL, Zhang YM, Yu WJ, Gao JM (2016) Surface chemical composition analysis of heat-treated bamboo. Appl Surf Sci 371:383–390. https://doi.org/10.1016/j.apsusc.2016.03.015CrossRef

Ouyang M, Yang C, Tian D, Pan JM, Chen GP, Su HJ, Yan ZB, Ji CJ, Tang ZY, Fang JY (2022) A field-based estimation of moso bamboo forest biomass in China. Forest Ecol Manag 505:119885. https://doi.org/10.1016/j.foreco.2021.119885CrossRef

Phuong LX, Takayama M, Shida S, Matsumoto Y, Aoyagi T (2007) Determination of the accessible hydroxyl groups in heat-treated Styrax tonkinensis (Pierre) Craib ex Hartwich wood by hydrogen-deuterium exchange and ²H NMR spectroscopy. Holzforschung 61:488–491. https://doi.org/10.1515/HF.2007.086CrossRef

Rautkari L, Properzi M, Pichelin F, Hughes M (2009) Properties and set-recovery of surface densified Norway spruce and European beech. Wood Sci Technol 44:679–691. https://doi.org/10.1007/s00226-009-0291-0CrossRef

Saikia P, Dutta D, Kalita D, Bora JJ, Goswami T (2015) Improvement of mechano-chemical properties of bamboo by bio-chemical treatment. Constr Build Mater 101:1031–1036. https://doi.org/10.1016/j.conbuildmat.2015.10.106CrossRef

Su N, Fang CH, Yu ZX, Zhou H, Wang XK, Tang T, Zhang SQ, Fei BH (2021) Effects of rosin treatment on hygroscopicity, dimensional stability, and pore structure of round bamboo culm. Constr Build Mater 287:123037. https://doi.org/10.1016/j.conbuildmat.2021.123037CrossRef

Sun SN, Li HY, Cao XF, Xu F, Sun RC (2015) Structural variation of eucalyptus lignin in a combination of hydrothermal and alkali treatments. Bioresource Technol 176:296–299. https://doi.org/10.1016/j.biortech.2014.11.030CrossRef

Tang T, Chen XF, Zhang B, Liu XM, Fei BH (2019a) Research on the physico-mechanical properties of moso bamboo with thermal treatment in tung oil and its influencing factors. Materials 12:599. https://doi.org/10.3390/ma12040599CrossRefPubMedPubMedCentral

Tang T, Zhang B, Liu XM, Wang WB, Chen XF, Fei BH (2019b) Synergistic effects of tung oil and heat treatment on physicochemical properties of bamboo materials. Sci Rep 9:12824. https://doi.org/10.1038/s41598-019-49240-8CrossRefPubMedPubMedCentral

Tang T, Fei BH, Song W, Su N, Sun FB (2022a) Tung oil thermal treatment improves the visual effects of moso bamboo materials. Polymers 14:1250. https://doi.org/10.3390/polym14061250CrossRefPubMedPubMedCentral

Tang T, Sui Z, Fei BH (2022b) The microstructure of Moso bamboo (Phyllostachys heterocycla) with tung oil thermal treatment. IAWA J 43:322–336. https://doi.org/10.1163/22941932-bja1ooS3CrossRef

Trentin LN, Pereira CS, Silveira RL, Hill S, Sorieul M, Skaf MS (2021) Nanoscale wetting of crystalline cellulose. Biomacromol 22:4251–4261. https://doi.org/10.1021/acs.biomac.1c00801CrossRef

Wei LQ, McDonald AG, Stark NM (2015) Grafting of bacterial polyhydroxybutyrate (PHB) onto cellulose via in situ reactive extrusion with dicumyl peroxide. Biomacromol 16:1040–1049. https://doi.org/10.1021/acs.biomac.5b00049CrossRef

Xu GQ, Wang LH, Liu JL, Wu JZ (2013) FTIR and XPS analysis of the changes in bamboo chemical structure decayed by white-rot and brown-rot fungi. Appl Surf Sci 280:799–805. https://doi.org/10.1016/j.apsusc.2013.05.065CrossRef

Yang TH, Lee CH, Lee CJ, Cheng YW (2016) Effects of different thermal modification media on physical and mechanical properties of moso bamboo. Constr Build Mater 119:251–259. https://doi.org/10.1016/j.conbuildmat.2016.04.156CrossRef

Ye CY, Huang YH, Feng QM, Fei BH (2020) Effect of hygrothermal treatment on the porous structure and nanomechanics of moso bamboo. Sci Rep 10:6553. https://doi.org/10.1038/s41598-020-63524-4CrossRefPubMedPubMedCentral

Yoo Y, Youngblood JP (2017) Tung oil wood finishes with improved weathering, durability, and scratch performance by addition of cellulose nanocrystals. ACS Appl Mater Interfaces 9:24936–24946. https://doi.org/10.1021/acsami.7b04931CrossRefPubMed

Yuan ZR, Wu XW, Wang XZ, Zhang X, Yuan TC, Liu XM, Li YJ (2020) Effects of one-step hot oil treatment on the physical, mechanical, and surface properties of bamboo scrimber. Molecules 25:4488. https://doi.org/10.3390/molecules25194488CrossRefPubMedPubMedCentral

Yuan J, Chen Q, Fang CH, Zhang SQ, Liu XM, Fei BH (2021a) Effect of chemical composition of bamboo fibers on water sorption. Cellulose 28:7273–7282. https://doi.org/10.1007/s10570-021-03988-3CrossRef

Yuan TC, Xiao X, Zhang T, Yuan ZR, Wang XZ, Li YJ (2021b) Preparation of crack-free, non-notched, flattened bamboo board and its physical and mechanical properties. Ind Crop Prod 174:114218. https://doi.org/10.1016/j.indcrop.2021.114218CrossRef

Yuan J, Chen L, Chen Q, Huang B, Fang CH, Lian CP, Fei BH (2022a) Inherent characteristics of the hygroscopicity of fiber and parenchyma of bamboo. Cellulose 29:4951–4959. https://doi.org/10.1007/s10570-022-04599-2CrossRef

Yuan TC, Wang XZ, Lou ZC, Zhang T, Han X, Wang ZS, Hao XM, Li YJ (2022b) Comparison of the fabrication process and macro and micro properties of two types of crack-free, flatten bamboo board. Constr Build Mater 317:125949. https://doi.org/10.1016/j.conbuildmat.2021.125949CrossRef

Yuan TC, Zhang T, Huang YQ, Wu YF, Wang XZ, Li YJ (2022c) Study on bamboo longitudinal flattening technology. Polymers 14:816. https://doi.org/10.3390/polym14040816CrossRefPubMedPubMedCentral

Yuan TC, Wang XZ, Liu XR, Lou ZC, Mao SF, Li YJ (2022d) Bamboo flattening technology enables efficient and value-added utilization of bamboo in the manufacture of furniture and engineered composites. Compos Part B Eng 242:110097. https://doi.org/10.1016/j.compositesb.2022.110097CrossRef

Zhang XX, Li J, Yu Y, Wang HK (2018) Investigating the water vapor sorption behavior of bamboo with two sorption models. J Mater Sci 53:8241–8249. https://doi.org/10.1007/s10853-018-2166-yCrossRef

Zhang SQ, Liu R, Lian CP, Luo JJ, Yang F, Liu XM, Fei BH (2019a) Intercellular pathways in internodal metaxylem vessels of moso bamboo Phyllostachys edulis. IAWA J 40:871–883. https://doi.org/10.1163/22941932-40190237CrossRef

Zhang XC, Zhou ZZ, Zhu YD, Dai JF, Yu YM, Song PG (2019b) High-pressure steam: A facile strategy for the scalable fabrication of flattened bamboo biomass. Ind Crop Prod 129:97–104. https://doi.org/10.1016/j.indcrop.2018.11.061CrossRef

Zhang XB, Fei BH, Jiang ZH, Liu HR, Liu XQ (2020) Study on bonding performance of flatten bamboo panels. China Forest Products Ind 57:16–19. https://doi.org/10.19531/j.issn1001-5299.202009004CrossRef

Zhao YK, Wang ZH, Iida I, Huang RF, Lu JX, Jiang JH (2015) Studies on pre-treatment by compression for wood drying I: effects of compression ratio, compression direction and compression speed on the reduction of moisture content in wood. J Wood Sci 61:113–119. https://doi.org/10.1007/s10086-014-1451-xCrossRef

Žlahtič M, Mikac U, Serša I, Merela M, Humar M (2017) Distribution and penetration of tung oil in wood studied by magnetic resonance microscopy. Ind Crop Prod 96:149–157. https://doi.org/10.1016/j.indcrop.2016.11.049CrossRef

Titel: Tung oil improves dimensional stability of flattened bamboo
verfasst von: Tong Tang
Xiubiao Zhang
Benhua Fei
Publikationsdatum: 12.08.2023
Verlag: Springer Berlin Heidelberg
Erschienen in: European Journal of Wood and Wood Products / Ausgabe 6/2023
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-023-01978-9

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2023

Evaluation of wet tensile shear strength and surface properties of finger-jointed acetylated beech (Fagus sylvatica L.) laminated veneer lumber

Fine dust after sanding untreated and thermally modified spruce, oak, and meranti wood

Effects of bolt diameter and load direction on dowel-bearing behaviour of laminated bamboo

Mode-II progressive fracture of sawn timber and timber-adhesive bond: experimental evaluation of end notched flexure (ENF) testing using DIC

Aldehyde-amine crosslinked starch-based high-performance wood adhesive

Bamboo, basalt, glass, and polypropylene fiber-reinforced metakaolin based geopolymers: a comparative study