nach oben

Meccanica

Erschienen in:

05.11.2021

Wires for spring construction: full scale fatigue experimental tests

verfasst von: F. Ballo, M. Carboni, G. Mastinu, G. Previati

Erschienen in: Meccanica | Ausgabe 1/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The paper deals with the experimental assessment of the fatigue life of wires for spring construction. Fatigue testing of full-scale wires is not a well established procedure. The aim of the paper is to demonstrate that the fatigue properties of full-scale wires for spring construction can be assessed with a level of accuracy comparable with tests performed on standard small-scale specimens. For this purpose, a new bench able to perform high frequency tests for the characterization of the wires in the high and very high cycle fatigue regions is designed, built and employed. The failure mechanism of the tested wires is described by an in-depth analysis of the fractured surfaces. By a comparison with available literature data, the difference with respect to similar tests performed on small-scale specimens is highlighted. Performing the tests on the full-scale wires allows the assessment of the effectiveness of the manufacturing process. The effect of the actual surface finishing on the fatigue life of wires can be assessed.

Vorheriger Artikel Nonlinear responses of unbalanced flexible rotating shaft passing through critical speeds

Nächster Artikel Dynamic modeling and analysis of hybrid driven multi-link press mechanism considering non-uniform wear clearance of revolute joints

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Abe T, Furuya Y, Matsuoka S (2004) Gigacycle fatigue properties of 1800 MPa class spring steels. Fatigue Fract Eng Mater Struct 27(2):159–167. https://doi.org/10.1111/j.1460-2695.2004.00737.xCrossRef

Grad P, Reuscher B, Brodyanski A, Kopnarski M, Kerscher E (2012) Mechanism of fatigue crack initiation and propagation in the very high cycle fatigue regime of high-strength steels. Scripta Mater 67(10):838–841. https://doi.org/10.1016/j.scriptamat.2012.07.049CrossRef

Kaiser B, Pyttel B, Berger C (2011) VHCF-behavior of helical compression springs made of different materials. Int J Fatigue 33(1):23–32. https://doi.org/10.1016/J.IJFATIGUE.2010.04.009CrossRef

Pyttel B, Brunner I, Kaiser B, Berger C, Mahendran M (2014) Fatigue behaviour of helical compression springs at a very high number of cycles-investigation of various influences. Int J Fatigue 60:101–109. https://doi.org/10.1016/J.IJFATIGUE.2013.01.003CrossRef

Zoroufi M, Fatemi A (2007) A guideline for fatigue testing of components. In: Gdoutos EE (ed) Experimental analysis of nano and engineering materials and structures. Springer, Netherlands, pp 173–174CrossRef

Bacher-Hoechst M, Issler S (2013) Assessment of Very High Cycle Fatigue (VHCF) Effects in Practical Applications. Procedia Eng 66:26–33. https://doi.org/10.1016/j.proeng.2013.12.059CrossRef

Godfrey HJ (1941) The fatigue and bending properties of cold drawn steel wire. Trans Am Soc Metals 29(52):133–168

Shelton S, Swanger W (1935) Fatigue properties of steel wire. J Res Natl Bur Stand 14(1):17–32. https://doi.org/10.6028/jres.014.005CrossRef

Zhang J, Yang Z, Li S, Hui W, Weng Y (2006) Ultra high cycle fatigue behavior of automotive high strength spring steels 54SiCrV6 and 54SiCr6. Acta Metall Sin 42:259–264

10.

Berto F, Lazzarin P, Yates JR (2011) Multiaxial fatigue of V-notched steel specimens: a non-conventional application of the local energy method. Fatigue Fract Eng Mater Struct 34(11):921–943. https://doi.org/10.1111/j.1460-2695.2011.01585.xCrossRef

11.

Akiniwa Y, Stanzl-Tschegg S, Mayer H, Wakita M, Tanaka K (2008) Fatigue strength of spring steel under axial and torsional loading in the very high cycle regime. Int J Fatigue 30(12):2057–2063. https://doi.org/10.1016/J.IJFATIGUE.2008.07.004CrossRef

12.

Murakami Y (2002) Metal Fatigue: effects of small defects and nonmetallic inclusions. Elsevier, Oxford

13.

Pöllänen I, Martikka H (2010) Optimal re-design of helical springs using fuzzy design and FEM. Adv Eng Softw 41(3):410–414. https://doi.org/10.1016/J.ADVENGSOFT.2009.03.010CrossRefMATH

14.

Zhu Y, Wang Y, Huang Y (2014) Failure analysis of a helical compression spring for a heavy vehicles suspension system. Case Stud Eng Failure Anal 2(2):169–173. https://doi.org/10.1016/J.CSEFA.2014.08.001CrossRef

15.

Niemann G, Winter H, Höhn BR (2005) Maschienenelemente. Springer-Verlag, Berlin

16.

Hartmann E, Howell F (1959) Laboratory Fatigue testing of materials. In: Sines G, Waisman JL (eds) Metal fatigue. McGraw-Hill Co., New York

17.

Nakamura H, Nishihara T (1959) New Fatigue Testing Machine for Wire Rod. Utility Model Publ 45:45–49 (in Japanese)

18.

Huck M (1995) Rotating bending testing machine for long round rods. Patent WO/1995/002810

19.

IABG: Rotating bending test machine (RBTM)

20.

Ballo F, Carboni M, Mastinu G, Previati G (2019) Tempered Wire Fatigue Testing. In: SAE Technical Paper 2019-01-0532, pp. 1–5. https://doi.org/10.4271/2019-01-0532.Abstract

21.

Budynas RG, Nisbett JK (2014) Shigley’s Mechanical Engineering Design. McGraw Hill

22.

Campagnolo A, Dabalà M, Meneghetti G (2019) Effect of salt bath nitrocarburizing and post-oxidation on static and Fatigue behaviours of a construction steel. Metals 9(12):1–19CrossRef

23.

Baragetti S, Tordini F (2007) Fatigue resistance of PECVD coated steel alloy. Int J Fatigue 29(9–11):1832–1838. https://doi.org/10.1016/J.IJFATIGUE.2007.02.008CrossRefMATH

24.

(2006) EN10083-3:2006: Steels for quenching and tempering–part 3: technical delivery conditions for alloy steels. Standard, European Standard

25.

ASTM-E739 (2010) Standard practice for statistical analysis of linear or linearized stress-life and strain-life Fatigue data. Standard, ASTM International

26.

EN10270-2:2011 (2011) Oil hardened and tempered spring steel wire. Standard, European Standard

27.

ASTM-E8/E8M-16ae1 (2016) Standard Test Methods for Tension Testing of Metallic Materials. Standard, ASTM. International

28.

ASTM-E140-12B(2019)e1 (2019) Standard hardness conversion tables for metals relationship among brinell hardness, vickers hardness, rockwell hardness, superficial hardness, knoop hardness, scleroscope hardness, and leeb hardness. Standard, ASTM International

29.

ISO6508-1 (2016) Metallic materials—Rockwell hardness test—part 1: test method. Standard, International Organization for Standardization (2016)

Titel: Wires for spring construction: full scale fatigue experimental tests
verfasst von: F. Ballo
M. Carboni
G. Mastinu
G. Previati
Publikationsdatum: 05.11.2021
Verlag: Springer Netherlands
Erschienen in: Meccanica / Ausgabe 1/2022
Print ISSN: 0025-6455
Elektronische ISSN: 1572-9648
DOI: https://doi.org/10.1007/s11012-021-01448-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2022

Investigation of tiny jet locations effect in a sudden expansion duct for high-speed flows control using experimental and optimization methods

Analytical results in transient brush tyre models: theory for large camber angles and classic solutions with limited friction

A versatile friction model for Newtonian liquids flowing under unsteady regimes in pipes

A finite difference method for the static limit analysis of masonry domes under seismic loads

Adaptive variable impedance control for a modular soft robot manipulator in configuration space

Dynamic modeling and analysis of hybrid driven multi-link press mechanism considering non-uniform wear clearance of revolute joints

Premium Partner

Marktübersichten