Skip to main content
Erschienen in: Journal of Materials Engineering and Performance 4/2015

01.04.2015

A Novel Method of Evaluating the Mild to Severe Wear Transition Loads for Magnesium Alloys

verfasst von: C. Liang, Y. B. Wang, M. L. Yin, X. X. Lv, J. An

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 4/2015

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

This paper describes a novel method for predicting the mild to severe wear transition loads for AZ31 and AZ61 alloys at various sliding velocities. Morphologies and hardness of worn surfaces and microstructures in subsurfaces of AZ31 alloy were analyzed. A criterion of mild to severe wear transition is proposed, i.e., the mild to severe wear transition is controlled by a critical surface dynamic recrystallization (DRX) temperature. DRX temperatures in surface layers at transition loads are determined using recrystallization kinetics. Correlation between DRX temperature and transition load is established by introducing a constant c DRX that is associated with testing equipment and material properties of pin and disk in the critical DRX state. The transition loads are well predicted in a sliding velocity range of 0.5-4.0 m/s for AZ31 alloy, and 0.8-2.0 m/s for AZ61 alloy.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat H. Chen and A.T. Alpas, Sliding Wear Map for the Magnesium Alloy Mg-9Al-0.9Zn (AZ91), Wear, 2000, 246, p 106–116CrossRef H. Chen and A.T. Alpas, Sliding Wear Map for the Magnesium Alloy Mg-9Al-0.9Zn (AZ91), Wear, 2000, 246, p 106–116CrossRef
2.
Zurück zum Zitat J.F. Archard and W. Hirst, The Wear of Metals Under Unlubricated Conditions, Proc. R. Soc. A, 1956, 236, p 397–410CrossRef J.F. Archard and W. Hirst, The Wear of Metals Under Unlubricated Conditions, Proc. R. Soc. A, 1956, 236, p 397–410CrossRef
3.
Zurück zum Zitat J. Zhang and A.T. Alpas, Transition Between Mild and Severe Wear in Aluminum Alloys, Acta Mater., 1997, 45, p 513–518CrossRef J. Zhang and A.T. Alpas, Transition Between Mild and Severe Wear in Aluminum Alloys, Acta Mater., 1997, 45, p 513–518CrossRef
4.
Zurück zum Zitat J. An, R.G. Li, Y. Lu, C.M. Chen, Y. Xu, X. Chen, and L.M. Wang, Dry Sliding Wear Behavior of Magnesium Alloys, Wear, 2008, 265, p 97–104CrossRef J. An, R.G. Li, Y. Lu, C.M. Chen, Y. Xu, X. Chen, and L.M. Wang, Dry Sliding Wear Behavior of Magnesium Alloys, Wear, 2008, 265, p 97–104CrossRef
5.
Zurück zum Zitat S.A. Selvan and S. Ramanthan, Dry Sliding Wear Behavior of Hot Extruded ZE41A Magnesium Alloy, Mater. Sci. Eng. A, 2010, 527, p 1815–1820CrossRef S.A. Selvan and S. Ramanthan, Dry Sliding Wear Behavior of Hot Extruded ZE41A Magnesium Alloy, Mater. Sci. Eng. A, 2010, 527, p 1815–1820CrossRef
6.
Zurück zum Zitat A.W. El-Morsy, Dry Sliding Wear Behavior of Hot Deformed Magnesium AZ61 Alloy as Influenced by the Sliding Conditions, Mater. Sci. Eng. A, 2008, 473, p 330–335CrossRef A.W. El-Morsy, Dry Sliding Wear Behavior of Hot Deformed Magnesium AZ61 Alloy as Influenced by the Sliding Conditions, Mater. Sci. Eng. A, 2008, 473, p 330–335CrossRef
7.
Zurück zum Zitat H. Somekawa, S. Meada, T. Hirayama, T. Mitsuoka, T. Inoue, and T. Mukai, Microstructural Evolution During Dry Wear Test in Magnesium and Mg-Y Alloy, Mater. Sci. Eng. A, 2013, 561, p 371–377CrossRef H. Somekawa, S. Meada, T. Hirayama, T. Mitsuoka, T. Inoue, and T. Mukai, Microstructural Evolution During Dry Wear Test in Magnesium and Mg-Y Alloy, Mater. Sci. Eng. A, 2013, 561, p 371–377CrossRef
8.
Zurück zum Zitat A. Kumar Mondal, B.S.S. Chandra Rao, and S. Kumar, Wear Behaviour of AE42+ 20% Saffil Mg-MMC, Tribol. Int., 2007, 40, p 290–296CrossRef A. Kumar Mondal, B.S.S. Chandra Rao, and S. Kumar, Wear Behaviour of AE42+ 20% Saffil Mg-MMC, Tribol. Int., 2007, 40, p 290–296CrossRef
10.
Zurück zum Zitat H.S. Arora, H. Singh, and B.K. Dhindaw, Wear Behaviour of a Mg Alloy Subjected to Friction Stir Processing, Wear, 2013, 303, p 65–77CrossRef H.S. Arora, H. Singh, and B.K. Dhindaw, Wear Behaviour of a Mg Alloy Subjected to Friction Stir Processing, Wear, 2013, 303, p 65–77CrossRef
11.
Zurück zum Zitat B.L. Mordike and T. Ebert, Magnesium Properties—Application Potential, Mater. Sci. Eng. A, 2001, 302, p 37–45CrossRef B.L. Mordike and T. Ebert, Magnesium Properties—Application Potential, Mater. Sci. Eng. A, 2001, 302, p 37–45CrossRef
12.
Zurück zum Zitat S.A. Selvan and S. Ramanthan, Dry Sliding Wear Behavior of As-Cast ZE41A Magnesium Alloy, Mater. Des., 2010, 31, p 1930–1936CrossRef S.A. Selvan and S. Ramanthan, Dry Sliding Wear Behavior of As-Cast ZE41A Magnesium Alloy, Mater. Des., 2010, 31, p 1930–1936CrossRef
13.
Zurück zum Zitat A. Fabre and J.E. Masse, Friction Behavior of Laser Cladding Magnesium Alloy Against AISI, 52100 Steel, Tribol. Int., 2012, 46, p 247–253CrossRef A. Fabre and J.E. Masse, Friction Behavior of Laser Cladding Magnesium Alloy Against AISI, 52100 Steel, Tribol. Int., 2012, 46, p 247–253CrossRef
14.
Zurück zum Zitat P. Poddar, A. Das, and K.L. Sahoo, Dry sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys, Metall. Mater. Trans. A, 2014, 45, p 2270–2283CrossRef P. Poddar, A. Das, and K.L. Sahoo, Dry sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys, Metall. Mater. Trans. A, 2014, 45, p 2270–2283CrossRef
15.
Zurück zum Zitat B. Yao, Z. Han, and K. Lu, Correlation Between Wear Resistance and Subsurface Recrystallization Structure in Copper, Wear, 2012, 294-295, p 438–445CrossRef B. Yao, Z. Han, and K. Lu, Correlation Between Wear Resistance and Subsurface Recrystallization Structure in Copper, Wear, 2012, 294-295, p 438–445CrossRef
16.
Zurück zum Zitat C. Taltavull, B. Torres, A.J. Lopez, and J. Rams, Dry Sliding Wear Behavior of AM60B Magnesium Alloy, Wear, 2013, 301, p 615–625CrossRef C. Taltavull, B. Torres, A.J. Lopez, and J. Rams, Dry Sliding Wear Behavior of AM60B Magnesium Alloy, Wear, 2013, 301, p 615–625CrossRef
17.
Zurück zum Zitat M. Marya, L.G. Hector, R. Verma, and W. Tong, Microstructure Effects of AZ31 Magnesium Alloy on its Tensile Deformation and Failure Behaviors, Mater. Sci. Eng. A, 2006, 418, p 341–356CrossRef M. Marya, L.G. Hector, R. Verma, and W. Tong, Microstructure Effects of AZ31 Magnesium Alloy on its Tensile Deformation and Failure Behaviors, Mater. Sci. Eng. A, 2006, 418, p 341–356CrossRef
18.
Zurück zum Zitat N. Tang, M.P. Wang, H.F. Lou, Y.Y. Zhao, and Z. Li, Microstructure and Texture of Twin-Roll Cast Mg-3Al-1Zn-0.2Mn Magnesium Alloy, Mater. Chem. Phys., 2009, 116, p 11–15CrossRef N. Tang, M.P. Wang, H.F. Lou, Y.Y. Zhao, and Z. Li, Microstructure and Texture of Twin-Roll Cast Mg-3Al-1Zn-0.2Mn Magnesium Alloy, Mater. Chem. Phys., 2009, 116, p 11–15CrossRef
19.
Zurück zum Zitat S.C. Lim and M.F. Ashby, Wear-Mechanism Maps, Acta Metall., 1987, 35, p 1–24CrossRef S.C. Lim and M.F. Ashby, Wear-Mechanism Maps, Acta Metall., 1987, 35, p 1–24CrossRef
20.
Zurück zum Zitat C. Liang, C. Li, J. An, M. Yu, Y.C. Hu, W.H. Lin, F. Liu, and Y.H. Ding, Effect of Microstructural Evolution and Hardening in Subsurface on Wear Behavior of Mg-3Al-1Zn Alloy, J. Mater. Eng. Perform., 2013, 22, p 3783–3791CrossRef C. Liang, C. Li, J. An, M. Yu, Y.C. Hu, W.H. Lin, F. Liu, and Y.H. Ding, Effect of Microstructural Evolution and Hardening in Subsurface on Wear Behavior of Mg-3Al-1Zn Alloy, J. Mater. Eng. Perform., 2013, 22, p 3783–3791CrossRef
21.
Zurück zum Zitat F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, 2005 F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, 2005
22.
Zurück zum Zitat X. Yang, Y. Okabe, H. Miura, and T. Sakai, Effect of Pass Strain and Temperature on Recrystallisation in Magnesium Alloy AZ31 After Interrupted Cold Deformation, J. Mater. Sci., 2012, 47, p 2823–2830CrossRef X. Yang, Y. Okabe, H. Miura, and T. Sakai, Effect of Pass Strain and Temperature on Recrystallisation in Magnesium Alloy AZ31 After Interrupted Cold Deformation, J. Mater. Sci., 2012, 47, p 2823–2830CrossRef
23.
Zurück zum Zitat C.H. Park, C.S. Oh, and S. Kim, Dynamic Recrystallization of the H- and O-Tempered AZ31 Sheets at Elevated Temperatures, Mater. Sci. Eng. A, 2012, 542, p 127–139CrossRef C.H. Park, C.S. Oh, and S. Kim, Dynamic Recrystallization of the H- and O-Tempered AZ31 Sheets at Elevated Temperatures, Mater. Sci. Eng. A, 2012, 542, p 127–139CrossRef
24.
Zurück zum Zitat J.C. Tan and M.J. Tan, Dynamic Continuous Recrystallization Characteristics in Two Stage Deformation of Mg-3Al-1Zn Alloy, Mater. Sci. Eng. A, 2003, 339, p 124–132CrossRef J.C. Tan and M.J. Tan, Dynamic Continuous Recrystallization Characteristics in Two Stage Deformation of Mg-3Al-1Zn Alloy, Mater. Sci. Eng. A, 2003, 339, p 124–132CrossRef
25.
Zurück zum Zitat A. Mwembela, E.B. Konopleva, and H.J. McQueen, Microstructural Development in Mg Alloy AZ31 During Hot Working, Scr. Mater., 1997, 37, p 1789–1795CrossRef A. Mwembela, E.B. Konopleva, and H.J. McQueen, Microstructural Development in Mg Alloy AZ31 During Hot Working, Scr. Mater., 1997, 37, p 1789–1795CrossRef
26.
Zurück zum Zitat S. Das, A.T. Morale, and A.T. Alpas, Microstructural Evolution During High Temperature Sliding Wear of Mg-3%Al-1%Zn (AZ31) Alloy, Wear, 2010, 268, p 94–103CrossRef S. Das, A.T. Morale, and A.T. Alpas, Microstructural Evolution During High Temperature Sliding Wear of Mg-3%Al-1%Zn (AZ31) Alloy, Wear, 2010, 268, p 94–103CrossRef
27.
Zurück zum Zitat M.A. Moore and R.M. Douthwaite, Plastic Deformation Below Worn Surface, Metall. Trans., 1976, 7, p 1833–1839CrossRef M.A. Moore and R.M. Douthwaite, Plastic Deformation Below Worn Surface, Metall. Trans., 1976, 7, p 1833–1839CrossRef
28.
Zurück zum Zitat B. Venkataraman and G. Sundararajan, The Sliding Behaviour of Al-SiC Particulate Composites II. The Characterization of Subsurface Deformation and Correlation with Wear Behaviour, Acta Mater., 1996, 44, p 461–473CrossRef B. Venkataraman and G. Sundararajan, The Sliding Behaviour of Al-SiC Particulate Composites II. The Characterization of Subsurface Deformation and Correlation with Wear Behaviour, Acta Mater., 1996, 44, p 461–473CrossRef
29.
Zurück zum Zitat H.Y. Wu, J.C. Yang, F.J. Zhu, and H.C. Liu, Hot Deformation Characteristics of As-Cast and Homogenized AZ61 Mg Alloys Under Compression, Mater. Sci. Eng. A, 2013, 550, p 273–278CrossRef H.Y. Wu, J.C. Yang, F.J. Zhu, and H.C. Liu, Hot Deformation Characteristics of As-Cast and Homogenized AZ61 Mg Alloys Under Compression, Mater. Sci. Eng. A, 2013, 550, p 273–278CrossRef
Metadaten
Titel
A Novel Method of Evaluating the Mild to Severe Wear Transition Loads for Magnesium Alloys
verfasst von
C. Liang
Y. B. Wang
M. L. Yin
X. X. Lv
J. An
Publikationsdatum
01.04.2015
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 4/2015
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-014-1372-2

Weitere Artikel der Ausgabe 4/2015

Journal of Materials Engineering and Performance 4/2015 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.