Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Bücher
Zeitschriften
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
SLX-Digitalkonferenz: Zukunftswerkstatt 2024

Mehr Umsatz mit Top-Kontakten

Am 7. Mai erfahren Sie, wie Vertriebsteams Leadgenerierung, Leadnurturing und Leadstrategien effizient steuern können.
Erweiterte Suche
Anmelden
nach oben
The International Journal of Advanced Manufacturing Technology
Erschienen in: The International Journal of Advanced Manufacturing Technology 3-4/2021

05.08.2021 | Critical Review

A review on wire-arc additive manufacturing: typical defects, detection approaches, and multisensor data fusion-based model

verfasst von: Xi Chen, Fanrong Kong, Youheng Fu, Xushan Zhao, Runsheng Li, Guilan Wang, Haiou Zhang

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 3-4/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Wire-arc additive manufacturing (WAAM) technology integrates the characteristics of additive manufacturing and traditional welding technology. It has been found to be capable of forming large-scale metal components with low cost and higher deposition rates. However, it also has potential issues in morphological accuracy, microstructure, and properties due to the arc-based metallurgy mechanisms with complex thermal cycles. This article intends to give a detailed overview of the quality diagnosis and control of the WAAM process, including the formation mechanisms of typical defects, detection approaches, and detection challenges that remain in the WAAM industrial environments. Subsequently, a multisensor data fusion-based closed-loop quality control model is proposed. This model could provide a feasible solution to ensure the quality and deposition efficiency of WAAM parts in complex manufacturing conditions. Based on this model, a novel process named hybrid deposition and micro-rolling (HDMR) is introduced as the green transformation of traditional manufacturing approaches with higher energy efficiency and better quality.
Vorheriger Artikel Assessment of researches and case studies on Cloud Manufacturing: a bibliometric analysis
Nächster Artikel A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Martin JH, Yahata BD, Hundley JM, Mayer JA, Schaedler TA, Pollock TM (2017) 3D printing of high-strength aluminium alloys. Nature 549:365–369CrossRef
2.
Sun Z, Zhao Y, Wang Z (2019) Development status and trend research of nondestructive testing for additive new-conceptual structure. Vacuum 56:65–70
3.
ASTM Committee F42 on Additive Manufacturing Technologies (2012). Standard terminology for additive manufacturing technologies. Astm International.
4.
Yoon HS, Lee JY, Kim HS, Kim MS, Kim ES, Shin YJ, Chu WS, Ahn SH (2014) A comparison of energy consumption in bulk forming, subtractive, and additive processes: Review and case study. Int J Precis Eng Manuf - Green Technol 1:261–279CrossRef
5.
Huang Y, Leu MC, Mazumder J, Donmez A (2015) Additive manufacturing: current state, future potential, gaps and needs, and recommendations. J Manuf Sci Eng 137
6.
Ingarao G, Priarone PC, Deng Y, Paraskevas D (2018) Environmental modelling of aluminium based components manufacturing routes: additive manufacturing versus machining versus forming. J Clean Prod 176:261–275CrossRef
7.
Frazier WE (2014) Metal additive manufacturing: a review. J Mater Eng Perform 23:1917–1928CrossRef
8.
Kong CY, Soar RC, Dickens PM (2004) Optimum process parameters for ultrasonic consolidation of 3003 aluminium. J Mater Process Technol 146:181–187CrossRef
9.
Zhao X, Lin X, Chen J, Xue L, Huang W (2009) The effect of hot isostatic pressing on crack healing, microstructure, mechanical properties of Rene88DT superalloy prepared by laser solid forming. Mater Sci Eng A 504:129–134CrossRef
10.
Kruth JP, Wang X, Laoui T, Froyen L (2003) Lasers and materials in selective laser sintering. Assem Autom 23:357–371CrossRef
11.
Hu D, Kovacevic R (2003) Sensing, modeling and control for laser-based additive manufacturing. Int J Mach Tools Manuf 43:51–60CrossRef
12.
Yadroitsev I, Bertrand P, Smurov I (2007) Parametric analysis of the selective laser melting process. Appl Surf Sci 253:8064–8069CrossRef
13.
Heinl P, Müller L, Körner C, Singer RF, Müller FA (2008) Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. Acta Biomater 4:1536–1544CrossRef
14.
Taminger K, Hafley RA (2003). Electron beam freeform fabrication: arapid metal deposition process. In: Proceedings of third annual automotive composites conference, Society of Plastic Engineers, USA.
15.
Hönnige JR, Colegrove PA, Ganguly S, Eimer E, Kabra S, Williams S (2018) Control of residual stress and distortion in aluminium wire + arc additive manufacture with rolling. Addit Manuf 22:775–783
16.
Fu Y, Zhang H, Wang G, Wang H (2017) Investigation of mechanical properties for hybrid deposition and micro-rolling of bainite steel. J Mater Process Technol 250:220–227CrossRef
17.
Montevecchi F, Venturini G, Scippa A, Campatelli G (2016) Finite element modelling of wire-arc-additive-manufacturing process. Procedia CIRP 55:109–114CrossRef
18.
Szost BA, Terzi S, Martina F, Boisselier D, Prytuliak A, Pirling T, Hofmann M, Jarvis DJ (2016) A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti-6Al-4V components. Mater Des 89:559–567CrossRef
19.
He Z (2016) Effect of ultrasonic impact on the properties of arc additive manufacturing of titanium alloy. Huazhong university of science and technology, Dissertation
20.
Ding D, Pan Z, Cuiuri D, Li H (2015) Wire-feed additive manufacturing of metal components: technologies, developments and future interests. Int J Adv Manuf Technol 81:465–481CrossRef
21.
Wu B, Pan Z, Ding D, Cuiuri D, Li H, Xu J, Norrish J (2018) A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement. J Manuf Process 35:127–139CrossRef
22.
Rodrigues TA, Duarte V, Miranda RM, Santos TG, Oliveira JP (2019) Current status and perspectives on Wire and Arc Additive Manufacturing (WAAM). Mater 12:1121CrossRef
23.
Shen C, Pan Z, Ma Y, Cuiuri D, Li H (2015) Fabrication of iron-rich Fe-Al intermetallics using the wire-arc additive manufacturing process. Addit Manuf 7:20–26
24.
Sames WJ, Medina F, Peter WH, Babu SS, RR. D (2014) Effect of process control and powder quality on inconel 718 produced using electron beam melting. In: 8th international symposium on superalloy 718 and derivatives. Superalloy 718 Deriv, PP 409-423.
25.
Javadi Y, MacLeod CN, Pierce SG, Gachagan A, Lines D, Mineo C, Ding J, Williams S, Vasilev M, Mohseni E, Su R (2019) Ultrasonic phased array inspection of a Wire + Arc Additive Manufactured (WAAM) sample with intentionally embedded defects. Addit Manuf 29:100806
26.
He D, Wang Z, Kusano M, Kishimoto S, Watanabe M (2019) Evaluation of 3D-Printed titanium alloy using eddy current testing with high-sensitivity magnetic sensor. NDT & E International 102:90–95CrossRef
27.
Hanke R, Fuchs T, Uhlmann N (2008) X-ray based methods for non-destructive testing and material characterization. Nucl Instrum Methods Phys Res A: Accel Spectrom Detect Assoc Equip 591:14–18CrossRef
28.
Ma Y, Hu Z, Tang Y, Ma S, Chu Y, Li X, Luo W, Guo L, Zeng X, Lu Y (2020) Laser opto-ultrasonic dual detection for simultaneous compositional, structural, and stress analyses for wire + arc additive manufacturing. Addit Manuf 31:100956
29.
Rao PK, Liu J, Roberson D, Kong Z (2015) Sensor-based online process fault detection in additive manufacturing. In: ASME 2015 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers Digital Collection.
30.
Williams SW, Martina F, Addison AC, Ding J, Pardal G, Colegrove P (2016) Wire+ arc additive manufacturing. Mater Sci Technol 32:641–647CrossRef
31.
Hu R, Zhang H, Xu J, Liu G (2005) Development of rapid metallic prototyping technique based on 3d welding. Machinery Design & Manufacture 9.
32.
Fu Y, Wang G, Zhang H, Liang L (2017) Optimization of surface appearance for wire and arc additive manufacturing of Bainite steel. Int J Adv Manuf Technol 91:301–313CrossRef
33.
Sterling AJ, Torries B, Shamsaei N, Thompson SM, Seely DW (2016) Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V. Mater Sci Eng A 655:100–112CrossRef
34.
Snell R, Tammas-Williams S, Chechik L, Lyle A, Hernández-Nava E, Boig C, Panoutsos G, Todd I (2020) Methods for rapid pore classification in metal additive manufacturing. JOM 72:101–109CrossRef
35.
Leung CLA, Marussi S, Atwood RC, Towrie M, Withers PJ, Lee PD (2018) In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing. Nat Commun 9:1355CrossRef
36.
Wolff SJ, Wu H, Parab N, Zhao C, Ehmann KF, Sun T, Cao J (2019) In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing. Scientific Reports 9.
37.
Gu J, Cong B, Ding J, Williams SW, Zhai Y (2014) Wire+arc additive manufacturing of aluminium. In: Proceedings of the 25th Annual International Solid Freeform Fabrication Symposium. Austin, pp 4-6.
38.
Cunningham R, Narra SP, Montgomery C, Beuth J, Rollett AD (2017) Synchrotron-based x-ray microtomography characterization of the effect of processing variables on porosity formation in laser power-bed additive manufacturing of Ti-6Al-4V. JOM 69:479–484CrossRef
39.
Boeira AP, Ferreira IL, Garcia A (2009) Alloy composition and metal/mold heat transfer efficiency affecting inverse segregation and porosity of as-cast Al-Cu alloys. Mater Des 30:2090–2098CrossRef
40.
Rudy JF, Rupert EJ (1983) Effects of porosity on mechanical properties of aluminum welds. Weld J 49:322
41.
Bouafia F, Boualem S, Amin MME, Benali B (2011) 3-D finite element analysis of stress concentration factor in spot-welded joints of steel: the effect of process-induced porosity. Comput Mater Sci 50:1450–1459CrossRef
42.
Sheridan L, Scott-Emuakpor OE, George T, Gockel JE (2018) Relating porosity to fatigue failure in additively manufactured alloy 718. Mater Sci Eng A 727:170–176CrossRef
43.
Gangireddy S, Faierson EJ, Mishra RS (2018) Influences of post-processing, location, orientation, and induced porosity on the dynamic compression behavior of Ti-6Al-4V alloy built through additive manufacturing. J Dyn Behav Mater 4:441–451CrossRef
44.
Weingarten C, Buchbinder D, Pirch N, Meiners W, Wissenbach K, Poprawe R (2015) Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg. J Mater Process Technol 221:112–120CrossRef
45.
Pellone L, Inamke G, Hong KM, Shin YC (2019) Effects of interface gap and shielding gas on the quality of alloy AA6061 fiber laser lap weldings. J Mater Process Technol 268:201–212CrossRef
46.
Gu J, Ding J, Williams SW, Gu H, Ma P, Zhai Y (2016) The effect of inter-layer cold working and post-deposition heat treatment on porosity in additively manufactured aluminum alloys. J Mater Process Technol 230:26–34CrossRef
47.
Yasa E, Kruth J (2011) Application of laser re-melting on selective laser melting parts. Adv Prod Eng Manag 6:259–270
48.
Cong B, Ding J, Williams S (2015) Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3%Cu alloy. Int J Adv Manuf Technol 76:1593–1606CrossRef
49.
Wang D, Lu J, Tang S, Yu L, Fan H, Ji L, Liu C (2018) Reducing porosity and refining grains for arc additive manufacturing aluminum alloy by adjusting arc pulse frequency and current. Mater 11:1344CrossRef
50.
Dhooge A, Vinckier A (1987) Reheat cracking—a review of recent studies. Int J Press Vessel Pip 27:239–269CrossRef
51.
Bozorgi S, Haberl K, Kneissl C (2011) Effect of alloying elements (magnesium and copper) on hot cracking susceptibility of AlSi7MgCu-Alloys. In: W Shape Casting: The 4th International Symposium, pp 113-120.
52.
Shen C, Pan Z, Cuiuri D, Ding D, Li H (2017) Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing process. Int J Adv Manuf Technol 88:2009–2018CrossRef
53.
Baughurst L, Voznaks G (2009) Welding defects, causes and correction. Australian Bulk Handling Review :26-28.
54.
Thavamani R, Balusamy V, Nampoothiri J, Subramanian R, Ravi KR (2018) Mitigation of hot cracking in Inconel 718 superalloy by ultrasonic vibration during gas tungsten arc welding. J Alloys Compd 740:870–878CrossRef
55.
Kou S (2003) Solidification and liquation cracking issues in welding. JOM 55:37–42CrossRef
56.
Mousavi GM (2014) Grain refinement and elimination of hot cracks due to application of electromagnetic stirring in commercial aluminum alloy welds. Adv Mater Res 875-877:1306–1311CrossRef
57.
Yu X, Lim YC, Smith R, Babu SS, Farson DF, Lippold JC, McCracken S (2014) Reducing hot cracking tendency of dissimilar weld overlay by magnetic arc oscillation. Mater Sci Technol 30:930–937CrossRef
58.
Ram GDJ, Mitra TK, Shankar V, Sundaresan S (2003) Microstructural refinement through inoculation of type 7020 Al-Zn-Mg alloy welds and its effect on hot cracking and tensile properties. J Mater Process Technol 142:174–181CrossRef
59.
Sames WJ, List FA, Pannala S, Dehoff RR, Babu SS (2016) The metallurgy and processing science of metal additive manufacturing. Int Mater Rev 61:315–360CrossRef
60.
Masubuchi K (2013) Analysis of welded structures: residual stresses, distortion, and their consequences. International Series on Mater Sci Tech 33.
61.
Thapliyal S (2019) Challenges associated with the wire arc additive manufacturing (WAAM) of aluminum alloys. Mater Res Express 6:112006CrossRef
62.
Denlinger ER, Michaleris P (2017) Mitigation of distortion in large additive manufacturing parts. Proc Inst Mech Eng B J Eng Manuf 231:983–993CrossRef
63.
Salonitis K, D'Alvise L, Schoinochoritis B, Chantzis D (2016) Additive manufacturing and post-processing simulation: laser cladding followed by high speed machining. Int J Adv Manuf Technol 85:2401–2411CrossRef
64.
Brice CA, Hofmeister WH (2013) Determination of bulk residual stresses in electron beam additive-manufactured aluminum. Metall Mater Trans A 44:5147–5153CrossRef
65.
Sames WJ, Medina F, Peter WH, Babu SS, Dehoff RR (2014) Effect of process control and powder quality on Inconel 718 produced using electron beam melting. In: 8th Int. Symp. Superalloy 718 Deriv, pp 409-423.
66.
Hagqvist P, Heralić A, Christiansson AK, Lennartson B (2015) Resistance based iterative learning control of additive manufacturing with wire. Mechatronics 31:116–123CrossRef
67.
Donoghue J, Antonysamy AA, Martina F, Colegrove PA, Williams SW, Prangnell PB (2016) The effectiveness of combining rolling deformation with Wire-Arc Additive Manufacture on β-grain refinement and texture modification in Ti-6Al-4V. Mater Charact 114:103–114CrossRef
68.
Heng A, Zhang S, Tan ACC, Mathew J (2009) Rotating machinery prognostics: State of the art, challenges and opportunities. Mech Syst Signal Process 23:724–739CrossRef
69.
Lopez A, Bacelar R, Pires I, Santos T, Quintino L (2017) Mapping of non-destructive techniques for inspection of wire and arc additive manufacturing. In: Proceedings of the 7th International Conference on Mechanics and Materials in Design, Portugal. PP 1829-1844.
70.
Bryant L E (1985) Nondestructive testing handbook. Volume 3: radiography and radiation testing. American Society for Nondestructive Testing. United States.
71.
Bai Q (2016) Research on impact mechanism of material surface emissivity and the variation reducing methods in thermography testing. Dissertation, University of Electronic Science and Technology of China.
72.
He Y, Gao B, Sophian A, Yang R (2017) Transient electromagnetic-thermal nondestructive testing: pulsed eddy current and transient eddy current thermography. Nation Defense Industry Press
73.
Vavilov VP, Burleigh DD (2015) Review of pulsed thermal NDT: physical principles, theory and data processing. NDT & E International 73:28–52CrossRef
74.
Pilla M, Klein M, Maldague X, Salerno A (2002) New absolute contrast for pulsed thermography. In: Proc QIRT 5:53–58
75.
Grys S, Minkina W (2010) Filtered thermal contrast-error analysis. In: 10th QIRT Conference, paper QIRT2010-051.
76.
Vavilov VP, Pawar SS (2015) A novel approach for one-sided thermal nondestructive testing of composites by using infrared thermography. Polym Test 44:224–233CrossRef
77.
Ren W, Sprague E, Mazumder J (2019) Real-time porosity diagnosis for laser additive manufacturing of aluminum alloy using optical emission spectroscopy. In:38th International congress on applications of laser & electro-optics.
78.
Kong F, Ma J, Carlson B, Kovacevic R (2012) Real-time monitoring of laser welding of galvanized high strength steel in lap joint configuration. Opt Laser Technol 44:2186–2196CrossRef
79.
Shelledy DC, Peters JI (2014) Respiratory care: patient assessment and care plan development. Jones & Bartlett Publishers.
80.
Krauss H, Zeugner T, Zaeh MF (2015) Thermographic process monitoring in powderbed based additive manufacturing. In: AIP Conference Proceedings, American Institute of Physics, pp 177-183.
81.
Chen X, Zhang H, Hu J, Xiao Y (2019) A passive on-line defect detection method for wire and arc additive manufacturing based on infrared thermography. In: Solid Freeform Fabrication 2019: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium.
82.
Chen X, Ye L, Zhu Z, Gui K, Zhang H (2019) An in situ online methodology for emissivity measurement between 100 °C and 500 °C utilizing infrared sensor. Infrared Phys Technol 102:102974CrossRef
83.
Liu Y, Guo G, Zeng Z, Li X, Tang J (2017) The development history, status and trend of infrared thermographic nondestructive testing. Nondestruct Test 39:68–75
84.
Corkum PB, Brunel F, Sherman NK, Srinivasan-Rao T (1988) Thermal response of metals to ultrashort-pulse laser excitation. Phys Rev Lett 61:2886–2889CrossRef
85.
Chen D, Li L, Li H, Zhang C, Feng L, Tao L (2008) Ultrasonic infrared thermography testing for the quality of laser welded seams. Nondestruct Test Evaluation 30:86–88
86.
Tsopelas N, Siakavellas NJ (2011) Experimental evaluation of electromagnetic-thermal non-destructive inspection by eddy current thermography in square aluminum plates. NDT & E International 44:609–620CrossRef
87.
Zhang Y, Gao X (2014) Analysis of characteristics of molten pool using cast shadow during high-power disk laser welding. Int J Adv Manuf Technol 70:1979–1988CrossRef
88.
Lott P, Schleifenbaum H, Meiners W, Wissenbach K, Hinke C, Bültmann J (2011) Design of an optical system for the in situ process monitoring of Selective Laser Melting (SLM). Phys Procedia 12:683–690CrossRef
89.
Zenzinger G, Bamberg J, Ladewig A, Hess T, Henkel B, Satzger W (2015) Process monitoring of additive manufacturing by using optical tomography. American Institute of Physics, In AIP Conference Proceedings, pp 164–170
90.
Tapia G, Elwany A (2014) A review on process monitoring and control in metal-based additive manufacturing. J Manuf Sci Eng 136.
91.
Saeed G, Zhang YM (2007) Weld pool surface depth measurement using a calibrated camera and structured light. Meas Sci Technol 18:2570–2578CrossRef
92.
Luan R, Wen G, Zhang R, Chen Z, Zhang Z (2017) Porosity defect detection based on FastICA-RBF during pulsed TIG welding process. In: 13th IEEE Conference on Automation Science and Engineering, pp 548-553.
93.
Spanner JC (1979) Acoustic emission: who needs it-and why. In: International conference on acoustic emission, Hanford Engineering Development Lab.
94.
Yang Z, Yu Z, Wu H, Chang D (2014) Laser-induced thermal damage detection in metallic materials via acoustic emission and ensemble empirical mode decomposition. J Mater Process Technol 214:1617–1626CrossRef
95.
Wu H (2017) Study of the monitoring technique and its application for additive manufacturing based on acoustuc emission. Dissertation, Zhejiang University.
96.
Jian H, Lee H, Ahn JH (2013) Detection of bearing/rail defects for linear motion stage using acoustic emission. Int J Precis Eng Manuf 14:2043–2046CrossRef
97.
Chen X, Li B (2007) Acoustic emission method for tool condition monitoring based on wavelet analysis. Int J Adv Manuf Technol 33:968–976CrossRef
98.
Yang Z, Yu Z, Wu H, Chang D (2014) Laser-induced thermal damage detection in metallic materials via acoustic emission and ensemble empirical mode decomposition. J Mater Process Technol 214:1617–1626CrossRef
99.
Bi H, Li Z, Hu D, Toku-Gyamerah I, Cheng Y (2015) Cluster analysis of acoustic emission signals in pitting corrosion of low carbon steel. Mater Werkst 46:736–746CrossRef
100.
Griffin JM (2015) Traceability of acoustic emission measurements for a proposed calibration method—classification of characteristics and identification using signal analysis. Mech Syst Signal Process 50(51):757–783CrossRef
101.
Oskouei AR, Heidary H, Ahmadi M, Farajpur M (2012) Unsupervised acoustic emission data clustering for the analysis of damage mechanisms in glass/polyester composites. Mater Des 37:416–422CrossRef
102.
Lopez AB, Santos J, Sousa JP, Santos TG, Quintino L (2019) Phased array ultrasonic inspection of metal additive manufacturing parts. J Nondestruct Eval 38:1–11CrossRef
103.
Lopez A, Bacelar R, Pires I, Santos TG, Sousa JP, Quintino L (2018) Non-destructive testing application of radiography and ultrasound for wire and arc additive manufacturing. Addit Manuf 21:298–306
104.
Shin HJ, Park JY, Hong SC, Lee JR (2017) In situ non-destructive evaluation of an aircraft UHF antenna radome based on pulse-echo ultrasonic propagation imaging. Compos Struct 160:16–22CrossRef
105.
Ohara Y, Oshiumi T, Nakajima H, Yamanaka K, Wu X, Uchimoto T, Takagi T, Tsuji T, Mihara T (2017) Ultrasonic phased array with surface acoustic wave for imaging cracks. AIP Adv 7:65214CrossRef
106.
Zhang Y, Chen Q, Sun Z, Tang X (2004) Development of research on electromagnetic acoustic transducer for nondestructive testing. Nondestructive Testing 6:275–279
107.
Everton S, Dickens P, Tuck C, Dutton B (2015) Evaluation of laser ultrasonic testing for inspection of metal additive manufacturing. In: Laser 3d Manufacturing II, International Society for Optics and Photonics.
108.
Ewald H, Krüger H (2005) Inductive sensors and their application in metal detection. In: International Conference on Sensing Technology, New Zealand.
109.
Auld BA, Moulder JC (1999) Review of advances in quantitative eddy current nondestructive evaluation. J Nondestruct Eval 18:3–36CrossRef
110.
Atherton DL (1995) Remote field eddy current inspection. IEEE Trans Magn 31:4142–4147CrossRef
111.
Yin W, Peyton AJ (2007) Thickness measurement of non-magnetic plates using multi-frequency eddy current sensors. Ndt & E International 40:43–48CrossRef
112.
Zhu S (2018) A review of eddy current nondestructive testing technology. Light Industry Science And Technology 34.
113.
Wu Z, Wu S, Zhang J, Kang G, Zhang H (2019) Defect induced fatigue behaviors of selective laser melted Ti-6Al-4V via synchrotron radiation x-ray tomography. Acta Metall Sin 55:811–820
114.
Raguvarun K, Balasubramaniam K, Rajagopal P, Palanisamy S, Nagarajah R, Kapoor A, Hoye N, Curiri D (2015) A study of internal structure in components made by additive manufacturing process using 3 D X-ray tomography. AIP Conference Proceedings 1650:146–155CrossRef
115.
Aucott L, Dong H, Mirihanage W, Atwood R, Kidess A, Gao S, Wen S, Marsden J, Feng S, Tong M, Connolley T, Drakopoulos M, Kleijn CR, Richardson IM, Browne DJ, Mathiesen RH, Atkinson HV (2018) Revealing internal flow behaviour in arc welding and additive manufacturing of metals. Nat Commun 9:1–7CrossRef
116.
Hushley WJ (1954) X-ray fluorescent screen. US, US2689189 A.
117.
Wevers M, Kerckhofs G, Pyka G, Herremans E, Ende AV, Hendrickx R, Verstrynge E, Mariën A, Valcke E, Pareyt B Wilderjans E (2012) X-ray computed tomography for nondestructive testing. In: International Conference on Industrial Computed Tomography.
118.
Hu B, Yu R, Zou H (2012) Magnetic non-destructive testing method for thin-plate aluminum alloys. NDT & E International 47:66–69CrossRef
119.
Kinchen D G, Aldahir E (2002) NDE of friction stir welds in aerospace applications. NASA Technical Reports Server.
120.
Liu S, Li F, Li L, Guo E, Zhang T, Wu H, Song Y (2006) Nondestructive evaluation methods for aluminium alloy friction stir welding. Aeronautical Manufacturing Technology 3:81
121.
Smith RA (2005) The potential for friction stir weld inspection using transient eddy currents. Insight-Non-Destructive Testing and Condition Monitoring 47:133–143CrossRef
122.
Lei Liu (2016) Research and implementation of online detection for additive manufacturing process based on arc-based deposition. Dissertation, Huazhong University of Science and Technology
123.
Lavery NP, Brown SG, Sienz J, Cherry J, Belblidia F (2014) A review of computational modelling of additive layer manufacturing–multi-scale and multi-physics. Sustain Design Manuf 651:673
124.
Xiong J, Li Y, Li R, Yin Z (2018) Influences of process parameters on surface roughness of multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing. J Mater Process Technol 252:128–136CrossRef
125.
Jia D, Li F, Zhang Y (2020) 3D-printing process design of lattice compressor impeller based on residual stress and deformation. Sci Rep 10:1–11CrossRef
126.
Yan W, Lin S, Kafka OL, Lian Y, Yu C, Liu Z, Yan J, Wolff S, Wu H, Ndip-Agbor E, Mozaffar M, Ehmann K, Cao J, Wagner GJ, Liu WK (2018) Data-driven multi-scale multi-physics models to derive process structure property relationships for additive manufacturing. Comput Mech 61:521–541MATHCrossRef
127.
Yadroitsau I (2009) Direct manufacturing of 3D-objects by selective laser melting of metal powders. Lambert Academic Publishing. Dissertation, Saint-Etienne university.
128.
Niedermayer D (2008) An introduction to bayesian networks and their contemporary applications. In: Springer. Berlin Heidelberg, Springer, Berlin, Heidelberg, pp 117–130
129.
Gros XE (2001) Applications of NDT Data Fusion. Kluwer Academic Publishers, Boston USACrossRef
130.
Kayser D, Bothe T, Osten W (2004) Scaled topometry in a multisensor approach. Opt Eng 43:2469–2477CrossRef
131.
Manske E, Hausotte T, Mastylo R, Franke KH, Macleidt T, Jager G (2007) New applications of the nanopositioning and nanomeasuring machine by using advanced tactile and non-tactile probes. Meas Sci Technol 18:520–527CrossRef
132.
Klein LA (2004) Sensor and data fusion: a tool for information assessment and decision making. SPIE press, Washington USA.
133.
Qiao N (2019) Fault diagnosis and health prediction of high-speed train transmission system based on multi-sensor fusion. Jilin University, Dissertation
134.
Zhang Z (2015) Research on feature extraction of welding defects for aluminum alloy during pulsed GTAW process using multisensor-based information fusion. Dissertation, Shanghai Jiao Tong University.
135.
Xu L, Chen Y, Cui P (2004) Improvement of D-S evidential theory in multisensor data fusion system. Fifth World Congress on Intelligent Control and Automation, IEEE, In
136.
Liu Y, Zhou Y, Hu C, Wu Q (2018) A review of multisensor information fusion technology. In: 37th Chinese Control Conference, IEEE.
137.
Ljung L (1979) Asymptotic behavior of the extended Kalman filter as a parameter estimator for linear systems. In: IEEE Transactions on Automatic Control, IEEE
138.
Waske B, Benediktsson JA (2007) Fusion of support vector machines for classification of multisensor Data. IEEE Trans Geosci Remote Sens 45:3858–3866CrossRef
139.
Ding Y, Dwivedi R, Kovacevic R (2017) Process planning for 8-axis robotized laser-based direct metal deposition system: a case on building revolved part. Robot Comput Integr Manuf 44:67–76CrossRef
140.
Walker JR (2019) Multi-sensor approach to determine the effect of geometry on microstructure in additive manufacturing. Dissertation, Wright State University.
141.
You D, Gao X, Katayama S (2015) WPD-PCA-based laser welding process monitoring and defects diagnosis by using FNN and SVM. IEEE Trans Ind Electron 62:628–636CrossRef
142.
Stutzman CB, Nassar AR, Reutzel EW (2018) Multi-sensor investigations of optical emissions and their relations to directed energy deposition processes and quality. Addit Manuf 21:333–339
143.
Dunbar AJ, Nassar AR (2018) Assessment of optical emission analysis for in-process monitoring of powder bed fusion additive manufacturing. Virtual Phys Prototyp 13:14–19CrossRef
144.
Dai F, Zhang H, Li R (2020) Process planning based on cylindrical or conical surfaces for five-axis wire and arc additive manufacturing. Rapid Prototyp J 26:1405–1420CrossRef
145.
Zhang H, Wang R, Liang L, Wang G (2016) HDMR technology for the aircraft metal part. Rapid Prototyp J 22:857–863CrossRef
146.
Xiong X, Zhang H, Wang G (2009) Metal direct prototyping by using hybrid plasma deposition and milling. J Mater Process Technol 209:124–130CrossRef
147.
Tang S, Wang G, Zhang H (2019) In situ 3D monitoring and control of geometric signatures in wire and arc additive manufacturing. Surface topography metrology and properties 7:25013CrossRef
148.
Li R, Wang G, Ding Y, Tang S, Chen X, Dai FS, Wang R, Song H, Zhang H (2020) Optimization of the geometry for the end lateral extension path strategy to fabricate intersections using laser and cold metal transfer hybrid Additive Manufacturing. Addit Manuf 36:101546
149.
Tang S, Wang G, Huang C, Li R, Zhou S, Zhang H (2020) Investigation, modeling and optimization of abnormal areas of weld beads in wire and arc additive manufacturing. Rapid Prototyp J 26:1183–1195CrossRef
150.
Xie Y, Zhang H, Zhou F (2016) Improvement in geometrical accuracy and mechanical property for arc-based additive manufacturing using metamorphic rolling mechanism. J Manuf Sci Eng 138:111002CrossRef
151.
Zhang H, Huang C, Wang G (2020) Comparison of energy consumption between hybrid deposition and micro-rolling and conventional approach for wrought parts. J Clean Prod 279:123307CrossRef
152.
Zhang H, Wang X, Wang G, Zhang Y (2013) Hybrid direct manufacturing method of metallic parts using deposition and micro continuous rolling. Rapid Prototyp J 19:387–394CrossRef
153.
Xiong X, Zhang H, Wang G, Wang G (2010) Hybrid plasma deposition and milling for an aeroengine double helix integral impeller made of superalloy. Robot Comput Integr Manuf 26:291–295CrossRef
Metadaten
Titel
A review on wire-arc additive manufacturing: typical defects, detection approaches, and multisensor data fusion-based model
verfasst von
Xi Chen
Fanrong Kong
Youheng Fu
Xushan Zhao
Runsheng Li
Guilan Wang
Haiou Zhang
Publikationsdatum
05.08.2021
Verlag
Springer London
Erschienen in
The International Journal of Advanced Manufacturing Technology / Ausgabe 3-4/2021
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI
https://doi.org/10.1007/s00170-021-07807-8

Weitere Artikel der Ausgabe 3-4/2021

The International Journal of Advanced Manufacturing Technology 3-4/2021 Zur Ausgabe

ORIGINAL ARTICLE

A multi-dwell temperature profile design for the cure of thick CFRP composite laminates

Critical Review

A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process

ORIGINAL ARTICLE

Study on the ultrasonic guided wave and online visual monitoring for ultrasonic precise bonding

ORIGINAL ARTICLE

Numerical investigation on the effects of circuit parameters on the plastic deformation of fastener holes in thin aluminum alloy via electromagnetic expansion process

ORIGINAL ARTICLE

Study of dieless radial spinning for thick-walled cylindrical parts with external grooves

ORIGINAL ARTICLE

Evaluating the hole quality produced by vibratory drilling: additive manufactured PLA+

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise