Skip to main content
main-content

Zeitschrift

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 3-4/2021

Ausgabe 3-4/2021

Inhaltsverzeichnis ( 44 Artikel )

04.08.2021 | Critical Review | Ausgabe 3-4/2021

Assessment of researches and case studies on Cloud Manufacturing: a bibliometric analysis

Daniel Alexandre Morelli, Paulo Sergio de Arruda Ignacio

05.08.2021 | Critical Review | Ausgabe 3-4/2021

A review on wire-arc additive manufacturing: typical defects, detection approaches, and multisensor data fusion-based model

Xi Chen, Fanrong Kong, Youheng Fu, Xushan Zhao, Runsheng Li, Guilan Wang, Haiou Zhang

05.08.2021 | Critical Review | Ausgabe 3-4/2021

A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process

Munish Kumar Gupta, Aqib Mashood Khan, Qinghua Song, Zhanqiang Liu, Qazi Salman Khalid, Muhammad Jamil, Mustafa Kuntoğlu, Üsame Ali Usca, Murat Sarıkaya, Danil Yu Pimenov

31.07.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

A generalized analysis of energy saving strategies through experiment for CNC milling machine tools

Chunhua Feng, Xiang Chen, Jingyang Zhang, Yugui Huang

31.07.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Accurate prediction of the extrusion forming bonding reliability for heterogeneous welded sheets based on GA-BP neural network

Lei Gao, Feng Li, Peng Da Huo, Chao Li, Jie Xu

31.07.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Data-driven sustainability evaluation of machining system: a case study

Cuixia Zhang, Cui Wang, Conghu Liu, Guang Zhu, Wenyi Li, Mengdi Gao

02.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Evaluating the hole quality produced by vibratory drilling: additive manufactured PLA+

Mohammad Baraheni, Mohammad Reza Shabgard, Saeid Amini

02.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Numerical investigation on the effects of circuit parameters on the plastic deformation of fastener holes in thin aluminum alloy via electromagnetic expansion process

Xiaofei Xu, Huihui Geng, Qingshan Cao, Quanliang Cao, Liang Li, Xiaoping Ouyang

02.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021 Open Access

Additive manufacturing of AISI 420 stainless steel: process validation, defect analysis and mechanical characterization in different process and post-process conditions

Erica Liverani, Alessandro Fortunato

02.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Sinterability properties of a ceramic synthesized from Algerian kaolin and spent magnesia-carbon refractory bricks

Alima Mebrek

02.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Experimental and numerical investigations on the deformation defects by gear rolling process with local induction heating

Xiaobin Fu, Baoyu Wang, Tao Wang

02.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Development of structured light 3D-scanner with high spatial resolution and its applications for additive manufacturing quality assurance

Rongxuan Wang, Andrew C. Law, David Garcia, Shuo Yang, Zhenyu Kong (James)

02.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Experiment investigation on machining characteristics of 7075 aluminium alloy with short electric arc milling

Dan Song, Jianping Zhou, Kedian Wang, Xuezhi Li, Xiaokang Chen, Kai Liu, Shuaishuai Wang, Xiang Wang

03.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Mechanical properties of tubular rivet-reinforced joints realized with different reinforcing loads

Xiaoqiang Ren, Chao Chen, Denglin Qin, Jinliang Wu, Yawen Ouyang

03.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Effect of outlet pressure and polymer addition on accuracy of machining stainless steel by abrasive suspension jet

Chiheng Qiang, Fengchao Wang, Chuwen Guo

03.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Manufacturing of micro components on amorphous alloy with a high-aspect-ratio characteristic structure by multistage forming method

Sirui Cheng, Jiang Ma, Feng Gong, Debin Shan, Chunju Wang, Dongfeng Diao, Jun Shen

03.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Fabrication and characterization of friction stir–processed Mg-Zn-Ca biomaterials strengthened with MgO particles

Zhen Liu, Yangchuan Cai, Jie Chen, Jian Han, Zhiyong Mao, Minfang Chen

03.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Cutting force modeling and experimental validation for micro end milling

Weijie Wang, Weiwei Zhang, Dingchuan Huang, Wei Wang

03.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Microcosmic mechanism of die-sinking mixed-gas atomization discharge ablation process on titanium alloy

Linglei Kong, Xiangzhi Wang, Qing He, Jinjin Han, Zhang Suorong, Ding Kai, Zhidong Liu

03.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Analysis on the interference assembly of camshaft with knurled tube and cam

Xiaoming Huang, Weitao Sun, Xiaoliang Liu, Yucan Wang, Jin Xing, Hailin Bi, Yuqian Wang, Wentao You

03.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Study on the ultrasonic guided wave and online visual monitoring for ultrasonic precise bonding

Yibo Sun, Mengruo Cao, Li Zou, Xinhua Yang

04.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Investigation on the stiffness of wire web of multi-wire sawing machine and its influence on machining accuracy

Jian Qiu, Shanbao Zhang, Rilai Fu, He Zhu, Guodong Yang, Yingkui Zou, Renpeng Ge

04.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021 Open Access

Surrogate model–based inverse parameter estimation in deep drawing using automatic knowledge acquisition

Matthias Ryser, Felix M. Neuhauser, Christoph Hein, Pavel Hora, Markus Bambach

04.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Evaluation on the formability of the third-generation automotive medium-Mn steel based on experiment and simulation

Ying Chang, Guojun Zheng, Xiaodong Li, Chunning Jin, Cunyu Wang, Han Dong

04.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Dynamics modeling and stability improvement in the machining of thin-walled workpiece with force-tunable pneumatic fixture

Jinjie Jia, Jinbo Niu, Yuwen Sun

04.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021 Open Access

Dissimilar friction stir lap welding of AA2198 and AA7075 sheets: forces, microstructure and mechanical properties

Antonello Astarita, Fausto Tucci, Alessia Teresa Silvestri, Michele Perrella, Luca Boccarusso, Pierpaolo Carlone

04.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Investigation of the wear behavior of abrasive grits in a dry machining Inconel 718 narrow-deep-groove with a single-layer cubic boron nitride grinding wheel

Guang Li, Guoxing Liang, Xingquan Shen, Ming Lv, Donggang Liu, Xinhui Hao, Yonggui Huang, Ojiako Princewill Tochukwu, Mohammed Al-Nehari

04.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Nonlinear vibratory properties of additive manufactured continuous carbon fiber reinforced polymer composites

Jing Zhao, Edmon Perkins, XiaoFu Li, Arthur Bond, Dan Marghitu

05.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Temperature uniformity of profiled grinding wheel under high-frequency induction brazing

Li Qilin, Ding Kai, Lei Weining, Kong Linglei, Chen Jiajia, Shan Daping, Wang Xichao

05.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Force prediction model of high efficiency U pass milling

Jingyang Feng, Zhaocheng Wei, Minjie Wang, Minglong Guo, Xueqin Wang

05.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Analytical prediction of transient and steady cutting temperature distributions in coated tools under time-varied heat sources

Jinfu Zhao, Zhanqiang Liu, Bing Wang, Qinghua Song

05.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

A multi-dwell temperature profile design for the cure of thick CFRP composite laminates

Wenchang Zhang, Yingjie Xu, Xinyu Hui, Weihong Zhang

05.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

A geometric prediction model of surface morphology in micro-EDM considering stochastic characteristics of discharge crater size

Shaojie Hou, Jicheng Bai

05.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Study of dieless radial spinning for thick-walled cylindrical parts with external grooves

Famei Liu, Junsong Jin, Wei Rao, Ying Wang, Chang Gao, Xuefeng Tang, Xinyun Wang

06.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Machinability study and ANN-MOALO-based multi-response optimization during Eco-Friendly machining of EN-GJL-250 cast iron

Aissa Laouissi, Mourad Nouioua, Mohamed Athmane Yallese, Hammoudi Abderazek, Hichem Maouche, Mohamed Lamine Bouhalais

06.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Experimental and numerical investigation of forming defects and stress analysis in laser-welded blanks during deep drawing process

Ahmad Aminzadeh, Sasan Sattarpanah Karganroudi, Noureddine Barka

06.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Comprehensive performance evaluation method of CNC servo turrets based on accuracy retentivity theory

Tongtong Jin, Zhaojun Yang, Ronglin Yao, Chuanhai Chen, Yepeng Liu, Wei Hu, Hailong Tian

06.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Tool path generation with global interference avoidance for the robotic polishing of blisks

Yuanming Wang, Jixiang Yang, Dingwei Li, Han Ding

06.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021 Open Access

Strain effect on microstructural properties of SUS 304L joint by PAW+GTAW

Wang Juan, Li Yajiang, Wang Qi, Liu Kun, Li Hang

06.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Performance improvement of high-speed EDM and ECM combined process by using a helical tube electrode with matched internal and external flushing

Lei Ji, Yan Zhang, Guoqian Wang, Jie Zhang, Wentao Yang

06.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Research on a multidimensional strain energy estimation method for welding spots based on performance optimization

Haisheng Song, Changhai Yang, Na Yang, Kunheng Li, Zhiyong Chen

06.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021 Open Access

Investigation of ultrasonic-assisted CNC cutting of honeycomb cores

Dongfang Mu, Xiaoping Hu, Haofeng Yu, Baohua Yu

07.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Effect of direct energy deposition parameters on morphology, residual stresses, density, and microstructure of 1.2709 maraging steel

Kulish Aleksandr, Salvatore Ferdinando, Rech Joel, Courbon Joel, Munoz Jordan, Joffre Thomas

07.08.2021 | ORIGINAL ARTICLE | Ausgabe 3-4/2021

Reliability evaluation method for squeeze casting process parameter data

Jianxin Deng, Zhixing Ye, Rui Tang, Dongdong You, Bin Xie

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise