nach oben

Rock Mechanics and Rock Engineering

Erschienen in:

27.11.2023 | Original Paper

A Statistical Anisotropic Damage Constitutive Model for Shale Including the Effects of Confining Pressure and Strain Rate

verfasst von: Jidong Jin, Jianxiang Wang, Linjuan Wang

Erschienen in: Rock Mechanics and Rock Engineering | Ausgabe 3/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Confining pressure, strain rate and anisotropy are three essential factors that affect the mechanical behaviors of shale. In this study, a damage constitutive model including the effects of all these three factors is developed to predict the deformation and strength of sedimentary shale. The inherent elastic tensor and the damage of shale are considered to be transversely isotropic. The statistical trans-scale theory is adopted to establish the formulation of the damage variable which connects the microscopic element damage to macroscopic rock failure. A generalized Lade criterion combined with the fabric tensor is proposed to take into account the anisotropic strength and tension–compression asymmetry of shale, which successfully predicts the different properties under tension and compression. The strain rate and confining pressure change shale’s stiffness and strength by influencing anisotropic elastic moduli and damage evolution rates. The theoretical predictions of the established model are in good agreement with the experimental results in the literature for various cases, demonstrating that the model can predict the stress–strain relations of transversely isotropic shale under complicated loading conditions.

Vorheriger Artikel A Short-Bar Combined-Wave Method for Wave Propagation Coefficient Determination

Nächster Artikel Evaluating Fracture Surface Imaging Methods Using Flow Simulations and Air Permeameter Measurements

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Aubertin M, Simon R (1997) A damage initiation criterion for low porosity rocks. Int J Rock Mech Min Sci 34(3–4):17-e1. https://doi.org/10.1016/S1365-1609(97)00145-7CrossRef

Bai Y, Xia M, Ke F et al (2001) Statistical microdamage mechanics and damage field evolution. Theor Appl Fract Mec 37(1):1–10. https://doi.org/10.1016/S0167-8442(01)00087-8CrossRef

Bai Y, Xia M, Ke F (2019) Statistical meso-mechanics of damage and failure: how microdamage induces disaster. Springer, BerlinCrossRef

Bažant ZP, Oh BH (1983) Crack band theory for fracture of concrete. Mater Struct 16(3):155–177. https://doi.org/10.1007/BF02486267CrossRef

Bian K, Liu J, Zhang W et al (2019) Mechanical behavior and damage constitutive model of rock subjected to water-weakening effect and uniaxial loading. Rock Mech Rock Eng 52:97–106. https://doi.org/10.1007/s00603-018-1580-4ADSCrossRef

Bobko C, Ulm FJ (2008) The nano-mechanical morphology of shale. Mech Mater 40(4–5):318–337. https://doi.org/10.1016/j.mechmat.2007.09.006CrossRef

Braun P, Ghabezloo S, Delage P et al (2021) Thermo-poro-elastic behaviour of a transversely isotropic shale: thermal expansion and pressurization. Rock Mech Rock Eng 54(1):359–375. https://doi.org/10.1007/s00603-020-02269-yADSCrossRef

Capurso M, Sacchi G (1972) Una condizione di plasticitá per solidi anisotropi. Meccanica 7:39–40

Cauvin A, Testa RB (1999) Damage mechanics: basic variables in continuum theories. Int J Solids Struct 36(5):747–761. https://doi.org/10.1016/S0020-7683(98)00044-4MathSciNetCrossRef

Chen CS, Pan E, Amadei B (1998) Determination of deformability and tensile strength of anisotropic rock using Brazilian tests. Int J Rock Mech Min 35(1):43–61. https://doi.org/10.1016/S0148-9062(97)00329-XCrossRef

Chen L, Shao J, Huang H (2010) Coupled elastoplastic damage modeling of anisotropic rocks. Comput Geotech 37(1):187–194. https://doi.org/10.1016/j.compgeo.2009.09.001CrossRef

Cheng J, Wan Z, Zhang Y et al (2015) Experimental study on anisotropic strength and deformation behavior of a coal measure shale under room dried and water saturated conditions. Shock Vib 2015:290–293. https://doi.org/10.1155/2015/290293CrossRef

Cho JW, Kim H, Jeon S et al (2012) Deformation and strength anisotropy of asan gneiss, boryeong shale, and yeoncheon schist. Int J Rock Mech Min 50:158–169. https://doi.org/10.1016/j.ijrmms.2011.12.004CrossRef

Chow C, Wang J (1987) An anisotropic theory of elasticity for continuum damage mechanics. Int J Fract 33(1):3–16. https://doi.org/10.1007/BF00034895CrossRef

Du K, Yang C, Su R et al (2020) Failure properties of cubic granite, marble, and sandstone specimens under true triaxial stress. Int J Rock Mech Min 130(104):309. https://doi.org/10.1016/j.ijrmms.2020.104309CrossRef

Fereidooni D, Khanlari GR, Heidari M et al (2016) Assessment of inherent anisotropy and confining pressure influences on mechanical behavior of anisotropic foliated rocks under triaxial compression. Rock Mech Rock Eng 49(6):2155–2163. https://doi.org/10.1007/s00603-015-0814-yADSCrossRef

Ferrari A, Laloui L (2013) Advances in the testing of the hydro-mechanical behaviour of shales. In: Laloui L, Ferrari A (eds) Multiphysical testing of soils and shales. Springer, Berlin, Heidelberg, pp 57–68. https://doi.org/10.1007/978-3-642-32492-5_5

Gale JF, Laubach SE, Olson JE et al (2014) Natural fractures in shale: a review and new observations. AAPG Bull 98(11):2165–2216. https://doi.org/10.1306/08121413151CrossRef

Hansen N, Schreyer H (1994) A thermodynamically consistent framework for theories of elastoplasticity coupled with damage. Int J Solids Struct 31(3):359–389. https://doi.org/10.1016/0020-7683(94)90112-0CrossRef

Hao L, Ke P, June W (1985) An anisotropic damage criterion for deformation instability and its application to forming limit analysis of metal plates. Eng Fract Mech 21(5):1031–1054. https://doi.org/10.1016/0013-7944(85)90008-6CrossRef

Hashin Z (1983) Analysis of composite materials—a survey. J Appl Mech 50(3):481–505. https://doi.org/10.1115/1.3167081CrossRef

Hashin Z, Rosen BW (1964) The elastic moduli of fiber-reinforced materials. J Appl Mech 31(2):223–232. https://doi.org/10.1115/1.3629590CrossRef

Hassanizadeh M, Gray WG (1979a) General conservation equations for multi-phase systems: 1. Averaging procedure. Adv Water Resour 2:131–144. https://doi.org/10.1016/0309-1708(79)90025-3ADSCrossRef

Hassanizadeh M, Gray WG (1979b) General conservation equations for multi-phase systems: 2. Mass, momenta, energy, and entropy equations. Adv Water Resour 2:191–203. https://doi.org/10.1016/0309-1708(79)90035-6ADSCrossRef

Hassanizadeh M, Gray WG (1980) General conservation equations for multi-phase systems: 3. Constitutive theory for porous media flow. Adv Water Resour 3(1):25–40. https://doi.org/10.1016/0309-1708(80)90016-0ADSCrossRef

Hornby BE (1998) Experimental laboratory determination of the dynamic elastic properties of wet, drained shales. J Geophys Res Solid Earth 103(B12):29945–29964. https://doi.org/10.1029/97JB02380CrossRef

Hou P, Liang X, Zhang Y et al (2021) 3D multi-scale reconstruction of fractured shale and influence of fracture morphology on shale gas flow. Nat Resour Res 30:2463–2481. https://doi.org/10.1007/s11053-021-09861-1CrossRef

Hu H, Braun P, Delage P et al (2021) Evaluation of anisotropic poroelastic properties and permeability of the opalinus clay using a single transient experiment. Acta Geotech 16(7):2131–2142. https://doi.org/10.1007/s11440-021-01147-3CrossRef

Huang L, Guo Y, Li X (2021a) Failure characteristics of shale after being subjected to high temperatures under uniaxial compression. B Eng Geol Environ 81:33. https://doi.org/10.1007/s10064-021-02492-zCrossRef

Huang X, Kong X, Chen Z et al (2021b) A plastic-damage model for rock-like materials focused on damage mechanisms under high pressure. Comput Geotech 137(104):263. https://doi.org/10.1016/j.compgeo.2021.104263CrossRef

Jaeger JC (1960) Shear failure of anistropic rocks. Geol Mag 97(1):65–72. https://doi.org/10.1017/S0016756800061100ADSCrossRef

Jameei A, Pietruszczak S (2020) Embedded discontinuity approach for coupled hydromechanical analysis of fractured porous media. Int J Numer Anal Met 44(14):1880–1902. https://doi.org/10.1002/nag.3112CrossRef

Jia C, Chen J, Guo Y et al (2013) Research on mechanical behaviors and failure modes of layer shale. Rock Soil Mech 34(S2):57–61. https://doi.org/10.16285/j.rsm.2013.s2.006CrossRef

Jia C, Zhang Q, Lei M et al (2021) Anisotropic properties of shale and its impact on underground structures: an experimental and numerical simulation. Bull Eng Geol Environ 80(10):7731–7745. https://doi.org/10.1007/s10064-021-02428-7CrossRef

Josh M, Esteban L, Delle Piane C et al (2012) Laboratory characterisation of shale properties. J Petrol Sci Eng 88:107–124. https://doi.org/10.1016/j.petrol.2012.01.023CrossRef

Kachanov LM, Bishop E, Kennedy AJ (1967) The theory of creep. National Lending Library for Science and Technology, Boston

Kamali-Asl A, Ghazanfari E, Hedayat A et al (2018) Investigation of static/dynamic moduli and plastic response of shale specimens. Int J Rock Mech Min 110:231–245. https://doi.org/10.1016/j.ijrmms.2018.08.008CrossRef

Kawakita M, Kinoshita S et al (1981) The dynamic fracture properties of rocks under confining pressure. Mem Fac Eng Hokkaido Univ 15(4):467–478

Kim MK, Lade PV (1984) Modelling rock strength in three dimensions. Int J Rock Mech Min Sci Geomech Abstr 21(1):21–33. https://doi.org/10.1016/0148-9062(84)90006-8CrossRef

Krajcinovic D, Silva MAG (1982) Statistical aspects of the continuous damage theory. Int J Solids Struct 18(7):551–562. https://doi.org/10.1016/0020-7683(82)90039-7CrossRef

Labuz JF, Zeng F, Makhnenko R et al (2018) Brittle failure of rock: a review and general linear criterion. J Struct Geol 112:7–28. https://doi.org/10.1016/j.jsg.2018.04.007ADSCrossRef

Lade PV (1977) Elasto-plastic stress-strain theory for cohesionless soil with curved yield surfaces. Int J Solids Struct 13(11):1019–1035. https://doi.org/10.1016/0020-7683(77)90073-7CrossRef

Lekhnitskii SG, Tsai S, Chéron T (1968) Anisotropic plates, vol 534. Gordon and Breach, New York

Lemaitre J, Chaboche JL (1978) Phenomenological approach of damage rupture. J Mec Appl 2(3):317–365

Li G, Tang CA (2015) A statistical meso-damage mechanical method for modeling trans-scale progressive failure process of rock. Int J Rock Mech Min 74:133–150. https://doi.org/10.1016/j.ijrmms.2014.12.006CrossRef

Li X, Cao WG, Su YH (2012) A statistical damage constitutive model for softening behavior of rocks. Eng Geol 143:1–17. https://doi.org/10.1016/j.enggeo.2012.05.005ADSCrossRef

Li C, Caner FC, Chau VT et al (2017a) Spherocylindrical microplane constitutive model for shale and other anisotropic rocks. J Mech Phys Solids 103:155–178. https://doi.org/10.1016/j.jmps.2017.03.006ADSMathSciNetCrossRef

Li Y, Jia D, Peng J et al (2017b) Evaluation method of rock brittleness based on statistical constitutive relations for rock damage. J Petrol Sci Eng 153:123–132. https://doi.org/10.1016/j.petrol.2017.03.041CrossRef

Li X, Liu Z, Cui S et al (2019) Predicting the effective mechanical property of heterogeneous materials by image based modeling and deep learning. Comput Method Appl Mech 347:735–753. https://doi.org/10.1016/j.cma.2019.01.005MathSciNetCrossRef

Liu IS (1982) On representations of anisotropic invariants. Int J Eng Sci 20(10):1099–1109. https://doi.org/10.1016/0020-7225(82)90092-1MathSciNetCrossRef

Liu Y, Dai F (2018) A damage constitutive model for intermittent jointed rocks under cyclic uniaxial compression. Int J Rock Mech Min 103:289–301. https://doi.org/10.1016/j.ijrmms.2018.01.046CrossRef

Liu L, Ji H, Elsworth D et al (2020) Dual-damage constitutive model to define thermal damage in rock. Int J Rock Mech Min 126(104):185. https://doi.org/10.1016/j.ijrmms.2019.104185CrossRef

Luo Y, Xie HP, Ren L et al (2018) Linear elastic fracture mechanics characterization of an anisotropic shale. Sci Rep UK 8(1):1–12. https://doi.org/10.1038/s41598-018-26846-yADSCrossRef

Luo N, Fan X, Cao X et al (2022) Dynamic mechanical properties and constitutive model of shale with different bedding under triaxial impact test. J Petrol Sci Eng 216(110):758. https://doi.org/10.1016/j.petrol.2022.110758CrossRef

Mahanta B, Tripathy A, Vishal V et al (2017) Effects of strain rate on fracture toughness and energy release rate of gas shales. Eng Geol 218:39–49. https://doi.org/10.1016/j.enggeo.2016.12.008CrossRef

Martin CD, Chandler NA (1994) The progressive fracture of lac du bonnet granite. Int J Rock Mech Min Sci Geomech Abstr 31(6):643–659. https://doi.org/10.1016/0148-9062(94)90005-1CrossRef

McGlade C, Speirs J, Sorrell S (2013) Unconventional gas-a review of regional and global resource estimates. Energy 55:571–584. https://doi.org/10.1016/j.energy.2013.01.048CrossRef

McLamore R, Gray K (1967) The mechanical behavior of anisotropic sedimentary rocks. J Eng Ind 89:62. https://doi.org/10.1115/1.3610013CrossRef

Mondal S, Olsen-Kettle LM, Gross L (2020) Sensitivity of the damage response and fracture path to material heterogeneity present in a sandstone specimen containing a pre-existing 3-D surface flaw under uniaxial loading. Comput Geotech 126(103):728. https://doi.org/10.1016/j.compgeo.2020.103728CrossRef

Nemat-Nasser S, Hori M (2013) Micromechanics: overall properties of heterogeneous materials. Elsevier, New York

Niandou H, Shao JF, Henry JP et al (1997) Laboratory investigation of the mechanical behaviour of tournemire shale. Int J Rock Mech Min 34(1):3–16. https://doi.org/10.1016/S0148-9062(96)00053-8CrossRef

Nova R, Zaninetti A (1990) An investigation into the tensile behaviour of a schistose rock. Int J Rock Mech Min Sci Geomech Abstr. https://doi.org/10.1016/0148-9062(90)90526-8CrossRef

Oboudi M, Pietruszczak S, Razaqpur A (2016) Description of inherent and induced anisotropy in granular media with particles of high sphericity. Int J Geomech 16(4):04016006. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000635CrossRef

Oda M (1972) Initial fabrics and their relations to mechanical properties of granular material. Soils Found 12(1):17–36. https://doi.org/10.3208/sandf1960.12.17CrossRef

Oda M (1993) Inherent and induced anisotropy in plasticity theory of granular soils. Mech Mater 16(1):35–45. https://doi.org/10.1016/0167-6636(93)90025-MCrossRef

Oda M, Nakayama H (1989) Yield function for soil with anisotropic fabric. J Eng Mech 115(1):89–104. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:1(89)CrossRef

Olsen-Kettle L (2018a) Quantifying the orthotropic damage tensor for composites undergoing damage-induced anisotropy using ultrasonic investigations. Compos Struct 204:701–711. https://doi.org/10.1016/j.compstruct.2018.07.096CrossRef

Olsen-Kettle L (2018b) Using ultrasonic investigations to develop anisotropic damage models for initially transverse isotropic materials undergoing damage to remain transverse isotropic. Int J Solids Struct 138:155–165. https://doi.org/10.1016/j.ijsolstr.2018.01.007CrossRef

Olsen-Kettle L (2019) Bridging the macro to mesoscale: evaluating the fourth-order anisotropic damage tensor parameters from ultrasonic measurements of an isotropic solid under triaxial stress loading. Int J Damage Mech 28(2):219–232. https://doi.org/10.1177/1056789518757293CrossRef

Olsen-Kettle L, Dautriat J, Sarout J (2022) Impact of stress-induced rock damage on elastic symmetry: from transverse isotropy to orthotropy. Rock Mech Rock Eng 55(6):3061–3081. https://doi.org/10.1007/s00603-022-02812-zADSCrossRef

Parisio F, Samat S, Laloui L (2015) Constitutive analysis of shale: a coupled damage plasticity approach. Int J Solids Struct 75:88–98. https://doi.org/10.1016/j.ijsolstr.2015.08.003CrossRef

Pei P, Dai F, Liu Y et al (2020) Dynamic tensile behavior of rocks under static pre-tension using the flattened Brazilian disc method. Int J Rock Mech Min 126(104):208. https://doi.org/10.1016/j.ijrmms.2019.104208CrossRef

Pietruszczak S, Haghighat E (2015) Modeling of deformation and localized failure in anisotropic rocks. Int J Solids Struct 67–68:93–101. https://doi.org/10.1016/j.ijsolstr.2015.04.004CrossRef

Pietruszczak S, Krucinski S (1989a) Considerations on soil response to the rotation of principal stress directions. Comput Geotech 8(2):89–110CrossRef

Pietruszczak S, Krucinski S (1989b) Description of anisotropic response of clays using a tensorial measure of structural disorder. Mech Mater 8(2–3):237–249. https://doi.org/10.1016/0167-6636(89)90014-8CrossRef

Pietruszczak S, Mróz Z (1981) Finite element analysis of deformation of strain-softening materials. Int J Numer Meth Eng 17(3):327–334. https://doi.org/10.1002/nme.1620170303CrossRef

Pietruszczak S, Mroz Z (2000) Formulation of anisotropic failure criteria incorporating a microstructure tensor. Comput Geotech 26(2):105–112. https://doi.org/10.1016/S0266-352X(99)00034-8CrossRef

Pietruszczak S, Mroz Z (2001) On failure criteria for anisotropic cohesive-frictional materials. Int J Numer Anal Met 25(5):509–524. https://doi.org/10.1002/nag.141CrossRef

Pietruszczak S, Pakdel P (2022) On the mechanical anisotropy of argillaceous cobourg limestone: fabric tensor approach. Int J Rock Mech Min 150(104):953. https://doi.org/10.1016/j.ijrmms.2021.104953CrossRef

Pietruszczak S, Lydzba D, Shao J (2002) Modelling of inherent anisotropy in sedimentary rocks. Int J Solids Struct 39(3):637–648. https://doi.org/10.1016/S0020-7683(01)00110-XCrossRef

Prat PC, Bažant ZP (1997) Tangential stiffness of elastic materials with systems of growing or closing cracks. J Mech Phys Solids 45(4):611–636. https://doi.org/10.1016/S0022-5096(96)00127-5ADSCrossRef

Qi M, Shao JF, Giraud A et al (2016) Damage and plastic friction in initially anisotropic quasi brittle materials. Int J Plast 82:260–282. https://doi.org/10.1016/j.ijplas.2016.03.008CrossRef

Rabotnov YN, Leckie FA, Prager W (1970) Creep problems in structural members. J Appl Mech 37(1):249. https://doi.org/10.1115/1.3408479CrossRef

Rahimi-Aghdam S, Chau VT, Lee H et al (2019) Branching of hydraulic cracks enabling permeability of gas or oil shale with closed natural fractures. Proc Natl Acad Sci USA 116:1532–1537. https://doi.org/10.1073/pnas.1818529116ADSCrossRefPubMedPubMedCentral

Rivlin RS, Ericksen JL (1955) Stress-deformation relations for isotropic materials. J Rat Mech Anal 4:323–425. https://doi.org/10.1007/978-1-4612-2416-7_61MathSciNetCrossRef

Rybacki E, Reinicke A, Meier T et al (2015) What controls the mechanical properties of shale rocks? Part i: strength and young’s modulus. J Petrol Sci Eng 135:702–722. https://doi.org/10.1016/j.petrol.2015.10.028CrossRef

Rybacki E, Meier T, Dresen G (2016) What controls the mechanical properties of shale rocks? Part ii: brittleness. J Petrol Sci Eng 144:39–58. https://doi.org/10.1016/j.petrol.2016.02.022CrossRef

Sarout J, Molez L, Guéguen Y et al (2007) Shale dynamic properties and anisotropy under triaxial loading: experimental and theoretical investigations. Phys Chem Earth 32(8):896–906. https://doi.org/10.1016/j.pce.2006.01.007ADSCrossRef

Seale MD, Smith BT, Prosser WH (1998) Lamb wave assessment of fatigue and thermal damage in composites. J Acoust Soc Am 103(5):2416–2424. https://doi.org/10.1121/1.422761ADSCrossRef

Sheng M, Tian S, Cheng Z et al (2019) Insights into the influence of fluid imbibition on dynamic mechanics of tight shale. J Petrol Sci Eng 173:1031–1036. https://doi.org/10.1016/j.petrol.2018.10.026CrossRef

Sidoroff F (1981) Description of anisotropic damage application to elasticity. In: Hult J, Lemaitre J (eds) Physical non-linearities in structural analysis. Springer, Berlin, Heidelberg, pp 237–244. https://doi.org/10.1007/978-3-642-81582-9_35

Simo JC, Ju J (1987) Strain- and stress-based continuum damage models-i. Formulation. Int J Solids Struct 23(7):821–840. https://doi.org/10.1016/0020-7683(87)90083-7CrossRef

Sone H, Zoback MD (2013) Mechanical properties of shale-gas reservoir rocks-part 1: static and dynamic elastic properties and anisotropy. Geophysics 78(5):D381–D392. https://doi.org/10.1190/GEO2013-0050.1CrossRef

Sun Q, Zhang Z, Li P et al (2019) Study on the bedding effect and damage constitutive model of black shale under dynamic loading. Chin J Rock Mech Eng 38(07):1319–1331. https://doi.org/10.13722/j.cnki.jrme.2018.1333CrossRef

Tan X, Konietzky H, Frühwirt T et al (2015) Brazilian tests on transversely isotropic rocks: laboratory testing and numerical simulations. Rock Mech Rock Eng 48(4):1341–1351. https://doi.org/10.1007/s00603-014-0629-2ADSCrossRef

Tan J, Xie B, Lyu Q et al (2022) Mechanical properties of shale after CO2 and CO2-based fluids imbibition: experimental and modeling study. Rock Mech Rock Eng 55:1197–1212. https://doi.org/10.1007/s00603-021-02702-wADSCrossRef

Terada K, Kikuchi N (2001) A class of general algorithms for multi-scale analyses of heterogeneous media. Comput Method Appl Mech 190:5427–5464. https://doi.org/10.1016/S0045-7825(01)00179-7MathSciNetCrossRef

Truesdell CA, Noll W (1965) The non-linear field theories of mechanics. Springer, Berlin

Ulusay R, Hudson JA (2012). Suggested methods for rock failure criteria: general introduction. In: Ulusay R (ed) The ISRM suggested methods for rock characterization, testing and monitoring: 2007–2014. Springer, Cham. https://doi.org/10.1007/978-3-319-07713-0_17

Veiskarami M, Azar E, Habibagahi G (2023) A rational hypoplastic constitutive equation for anisotropic granular materials incorporating the microstructure tensor. Acta Geotech 18(3):1233–1253. https://doi.org/10.1007/s11440-022-01661-yCrossRef

Vervoort A, Min KB, Konietzky H et al (2014) Failure of transversely isotropic rock under Brazilian test conditions. Int J Rock Mech Min 70:343–352. https://doi.org/10.1016/j.ijrmms.2014.04.006CrossRef

Wang L, Xu J, Wang J et al (2019) A mechanism-based spatiotemporal non-local constitutive formulation for elastodynamics of composites. Mech Mater 128:105–116. https://doi.org/10.1016/j.mechmat.2018.07.013CrossRef

Wong TF, Wong RHC, Chau KT et al (2006) Microcrack statistics, Weibull distribution and micromechanical modeling of compressive failure in rock. Mech Mater 38(7):664–681. https://doi.org/10.1016/j.mechmat.2005.12.002CrossRef

Wu R, Li H, Wang D (2021) Full-field deformation measurements from Brazilian disc tests on anisotropic phyllite under impact loads. Int J Impact Eng 149(6):103,790. https://doi.org/10.1016/j.ijimpeng.2020.103790CrossRef

Xia K, Yu Y, Wu B et al (2022) Correction of dynamic Brazilian disc tensile strength of rocks under preloading conditions considering the overload phenomenon and invoking the griffith criterion. J Rock Mech Geotech. https://doi.org/10.1016/j.jrmge.2022.10.011CrossRef

Xie H, Zhu J, Zhou T et al (2020) Conceptualization and preliminary study of engineering disturbed rock dynamics. Geomech Geophys Geol. https://doi.org/10.1007/s40948-020-00174-wCrossRef

Yang Q, Zhou WY, Chen X (2010) Thermodynamic significance and basis of damage variables and equivalences. Int J Damage Mech 19(8):898–910. https://doi.org/10.1177/1056789509359651CrossRef

Yang Z, He B, Xie L et al (2015) Strength and failure modes of shale based on Brazilian test. Rock Soil Mech 36(12):3447. https://doi.org/10.16285/j.rsm.2015.12.015CrossRef

Yang L, Ge H, Shi X et al (2016) The effect of microstructure and rock mineralogy on water imbibition characteristics in tight reservoirs. J Nat Gas Sci Eng 34:1461–1471. https://doi.org/10.1016/j.jngse.2016.01.002CrossRef

You T, Zhu QZ, Li PF et al (2020) Incorporation of tension-compression asymmetry into plastic damage phase-field modeling of quasi brittle geomaterials. Int J Plast 124:71–95. https://doi.org/10.1016/j.ijplas.2019.08.003CrossRef

You W, Dai F, Liu Y et al (2022) Effect of confining pressure and strain rate on mechanical behaviors and failure characteristics of sandstone containing a pre-existing flaw. Rock Mech Rock Eng. https://doi.org/10.1007/s00603-022-02772-4CrossRef

Yuan Z, Fish J (2016) Are the cohesive zone models necessary for delamination analysis? Comput Method Appl Mech 310:567–604. https://doi.org/10.1016/j.cma.2016.06.023MathSciNetCrossRef

Yvonnet J, He QC, Li P (2022) A data-driven harmonic approach to constructing anisotropic damage models with a minimum number of internal variables. J Mech Phys Solids 162(104):828. https://doi.org/10.1016/j.jmps.2022.104828MathSciNetCrossRef

Zeng X, Wei Y (2017) Crack deflection in brittle media with heterogeneous interfaces and its application in shale fracking. J Mech Phys Solids 101:235–249. https://doi.org/10.1016/j.jmps.2016.12.012ADSMathSciNetCrossRef

Zhang QB, Zhao J (2014) A review of dynamic experimental techniques and mechanical behaviour of rock materials. Rock Mech Rock Eng 47(4):1411–1478. https://doi.org/10.1007/s00603-013-0463-yADSCrossRef

Zhou Y, Sheng Q, Li N et al (2020) Dynamic increasing factor model for strength and modulus of rock materials at different strain rates. Chin J Rock Mech Eng 39(s2):3245–3259. https://doi.org/10.13722/j.cnki.jrme.2019.0886CrossRef

Zhu Q, Shao JF (2015) A refined micromechanical damage-friction model with strength prediction for rock-like materials under compression. Int J Solids Struct 60:75–83. https://doi.org/10.1016/j.ijsolstr.2015.02.005CrossRef

Zhu Z, Xu D, Wang L (1988) Thermoviscoelastic constitutive equation and time-temperature equivalence of epoxy resin at high strain rates. J Ningbo Univ 1(1):58–68. https://doi.org/CNKI:SUN:LBJY.0.1988-01-009

Zhu Q, Kondo D, Shao JF (2008) Micromechanical analysis of coupling between anisotropic damage and friction in quasi brittle materials: role of the homogenization scheme. Int J Solids Struct 45:1385–1405. https://doi.org/10.1016/j.ijsolstr.2007.09.026CrossRef

Titel: A Statistical Anisotropic Damage Constitutive Model for Shale Including the Effects of Confining Pressure and Strain Rate
verfasst von: Jidong Jin
Jianxiang Wang
Linjuan Wang
Publikationsdatum: 27.11.2023
Verlag: Springer Vienna
Erschienen in: Rock Mechanics and Rock Engineering / Ausgabe 3/2024
Print ISSN: 0723-2632
Elektronische ISSN: 1434-453X
DOI: https://doi.org/10.1007/s00603-023-03635-2

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2024

Determining S-Wave Arrival Times for Microseismic Monitoring in Tunnels Based on Instantaneous Phase Difference of Sensors

An Experimental Investigation into Effects of Shale Hydration on Breakdown Pressure and the Fracture Characteristics During Hydraulic Fracture Initiation

OCFMD: An Automatic Optimal Clustering Method of Discontinuity Orientation Based on Fisher Mixed Distribution

Classifying Rock Fragments Produced by Tunnel Boring Machine Using Optimized Convolutional Neural Network

In Situ Tests Comparing the Support Effects of Thin Spray-on Liner and Shotcrete on a Roadway Subjected to Blasting

Impact of Water Saturation on the Damage Evolution Characteristics of Sandstone Subjected to Freeze–Thaw Cycles