A study on multi-hole machining of high-power density electron beam using a vaporized amplification sheet

Recently, electron beam machining technology has been used in various ways depending on the industrial field. It is used in technologies in the fields of shipbuilding, aerospace, and transportation. In the case of the existing electron beam machining technology, a technology for welding or joining two materials was proposed. In this paper, in order to perform electron beam drilling, a multi-hole is created by increasing the instantaneous vaporization pressure during electron beam machining through a vaporized amplification sheet. A vaporized amplification sheet was prepared for electron beam drilling. The vaporized amplification sheet was made of a 1:3.25 combination of silicone and brass powder. Also, in order to bond the produced vaporized amplification sheet to the SUS 304 stainless steel, a primer was applied on the surface of the metal material to firmly bond the two materials with different properties. If the bonding is weak, the effectiveness decreases due to pressure leakage during electron beam machining. Multi-holes were processed using the fabricated material to fix an acceleration voltage of 120 kV and a current of 12 mA. Also, to compare the multi-hole shape and the processing result, the comparison was performed according to the exposure time of the electron beam. The lower the exposure time, the more fine holes were secured, and as the exposure time increased, the molten pool phenomenon occurred, and processing was not performed in the experimental results.