nach oben

International Journal of Mechanics and Materials in Design

Erschienen in:

21.10.2021

A topology optimization method for hyperelastic porous structures subject to large deformation

verfasst von: Jiaqi Huang, Shuzhi Xu, Yongsheng Ma, Jikai Liu

Erschienen in: International Journal of Mechanics and Materials in Design | Ausgabe 2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Porous infill, rather than the solids, can provide high stiffness-to-weight ratio, energy absorption, thermal insulation, and many other outstanding properties. However, porous structure design to date have been majorly performed with topology optimization under small deformation assumption. The effect of porosity control under large deformation is not explored yet. Hence, this paper exploits the topological design method of porous infill structures under large deformational configuration. Specifically, the neo-Hookean hyperelasticity model is adopted to simulate the large structural deformation, and the adjoint sensitivity analysis is performed accordingly with the governing equation and constraint. The maximum local volume fractions before and after deformation are concurrently constrained and especially for the latter, the representative volume points (RVPs) are modeled and tracked for evaluating the local volume fractions subject to the distorted mesh configuration. The local volume constraints are then aggregated with the P-norm method for a global expression. Iterative corrections are made to the P-norm function to rigorously restrict the upper bound of the maximum local volume. Finally, several benchmark cases are investigated, which validate the effectiveness of the proposed method.

Vorheriger Artikel Topology optimization design of porous infill structure with thermo-mechanical buckling criteria

Nächster Artikel A new bidirectional algorithm for topology optimization of thermoelastic structural problems

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Andreassen, E., Lazarov, B., Sigmund, O.: Design of manufacturable 3D extremal elastic microstructure. Mech. Mater. (2014). https://doi.org/10.1016/J.MECHMAT.2013.09.018CrossRef

Behrou, R., Ghanem, M.A., Macnider, B.C., Verma, V., Alvey, R., Hong, J., Emery, A.F., Kim, H.A., Boechler, N.: Topology optimization of nonlinear periodically microstructured materials for tailored homogenized constitutive properties. Compos. Struct. 266, 113729 (2021). https://doi.org/10.1016/j.compstruct.2021.113729CrossRef

Belytschko, T., Liu, W.K., Moran, B., Elkhodary, K.I.: Nonlinear finite elements for continua and structures. Wiley, Chichester, West Sussex, United Kingdon (2014)MATH

Bendsøe, M.P., Kikuchi, N.: Generating optimal topologies in structural design using a homogenization method. Comput. Methods Appl. Mech. Eng. 71, 197–224 (1988). https://doi.org/10.1016/0045-7825(88)90086-2MathSciNetCrossRefMATH

Bruns, T.E., Tortorelli, D.A.: An element removal and reintroduction strategy for the topology optimization of structures and compliant mechanisms. Int. J. Numer. Meth. Engng. 57, 1413–1430 (2003). https://doi.org/10.1002/nme.783CrossRefMATH

Buhl, T., Pedersen, C.B.W., Sigmund, O.: Stiffness design of geometrically nonlinear structures using topology optimization. Struct Multidisc Optim. 19, 93–104 (2000). https://doi.org/10.1007/s001580050089CrossRef

Chen, F., Wang, Y., Wang, M.Y., Zhang, Y.F.: Topology optimization of hyperelastic structures using a level set method. J. Comput. Phys. 351, 437–454 (2017). https://doi.org/10.1016/j.jcp.2017.09.040MathSciNetCrossRef

Das, S., Sutradhar, A.: Multi-physics topology optimization of functionally graded controllable porous structures: Application to heat dissipating problems. Mater. Des. 193, 108775 (2020). https://doi.org/10.1016/j.matdes.2020.108775CrossRef

De Leon, D.M., Gonçalves, J.F., de Souza, C.E.: Stress-based topology optimization of compliant mechanisms design using geometrical and material nonlinearities. Struct Multidisc Optim. (2020). https://doi.org/10.1007/s00158-019-02484-4MathSciNetCrossRef

Dou, S.: A projection approach for topology optimization of porous structures through implicit local volume control. Struct Multidisc Optim. 62, 835–850 (2020). https://doi.org/10.1007/s00158-020-02539-xMathSciNetCrossRef

Fritzen, F., Xia, L., Leuschner, M., Breitkopf, P.: Topology optimization of multiscale elastoviscoplastic structures. Int. J. Numer. Meth. Eng. 106, 430–453 (2016). https://doi.org/10.1002/nme.5122MathSciNetCrossRefMATH

Guest, J.K., Prévost, J.H.: Optimizing multifunctional materials: Design of microstructures for maximized stiffness and fluid permeability. Int. J. Solids Struct. 43, 7028–7047 (2006). https://doi.org/10.1016/j.ijsolstr.2006.03.001CrossRefMATH

Guo, X., Zhao, X., Zhang, W., Yan, J., Sun, G.: Multi-scale robust design and optimization considering load uncertainties. Comput. Methods Appl. Mech. Eng. 283, 994–1009 (2015). https://doi.org/10.1016/j.cma.2014.10.014MathSciNetCrossRefMATH

Ha, S.-H., Cho, S.: Level set based topological shape optimization of geometrically nonlinear structures using unstructured mesh. Comput. Struct. 86, 1447–1455 (2008). https://doi.org/10.1016/j.compstruc.2007.05.025CrossRef

Han, Y., Xu, B., Liu, Y.: An efficient 137-line MATLAB code for geometrically nonlinear topology optimization using bi-directional evolutionary structural optimization method. Struct Multidisc Optim. (2021). https://doi.org/10.1007/s00158-020-02816-9MathSciNetCrossRef

Huang, X., Radman, A., Xie, Y.M.: Topological design of microstructures of cellular materials for maximum bulk or shear modulus. Comput. Mater. Sci. 50, 1861–1870 (2011). https://doi.org/10.1016/j.commatsci.2011.01.030CrossRef

Huang, X., Xie, Y.M., Jia, B., Li, Q., Zhou, S.W.: Evolutionary topology optimization of periodic composites for extremal magnetic permeability and electrical permittivity. Struct Multidisc Optim. 46, 385–398 (2012). https://doi.org/10.1007/s00158-012-0766-8MathSciNetCrossRefMATH

Huang, X., Zhou, S., Sun, G., Li, G., Xie, Y.M.: Topology optimization for microstructures of viscoelastic composite materials. Comput. Methods Appl. Mech. Eng. 283, 503–516 (2015). https://doi.org/10.1016/j.cma.2014.10.007CrossRefMATH

Kim, N.-H.: Introduction to nonlinear finite element analysis. Springer, New York, NY (2015)CrossRef

Kim, S., Yun, G.J.: Microstructure topology optimization by targeting prescribed nonlinear stress-strain relationships. Int. J. Plast 128, 102684 (2020). https://doi.org/10.1016/j.ijplas.2020.102684CrossRef

Klarbring, A., Strömberg, N.: Topology optimization of hyperelastic bodies including non-zero prescribed displacements. Struct Multidisc Optim. 47, 37–48 (2013). https://doi.org/10.1007/s00158-012-0819-zMathSciNetCrossRefMATH

Li, H., Gao, L., Li, H., Tong, H.: Spatial-varying multi-phase infill design using density-based topology optimization. Comput. Method. Appl. Mech. Eng. 372, 113354 (2020). https://doi.org/10.1016/j.cma.2020.113354MathSciNetCrossRefMATH

Liu, L., Xing, J., Yang, Q., Luo, Y.: Design of large-displacement compliant mechanisms by topology optimization incorporating modified additive hyperelasticity technique. Math. Probl. Eng. 2017, 1–11 (2017). https://doi.org/10.1155/2017/4679746MathSciNetCrossRefMATH

Liu, J., Gaynor, A.T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C.C.L., Cheng, L., Liang, X., To, Albert.C.: Current and future trends in topology optimization for additive manufacturing. Struct. Multidisc. Optim. 57, 2457–2483 (2018). https://doi.org/10.1007/s00158-018-1994-3CrossRef

Liu, B., Cao, W., Zhang, L., Jiang, K., Lu, P.: A design method of Voronoi porous structures with graded relative elasticity distribution for functionally gradient porous materials. Int J Mech Mater Des. (2021). https://doi.org/10.1007/s10999-021-09558-6CrossRef

Long, K., Wang, X., Liu, H.: Stress-constrained topology optimization of continuum structures subjected to harmonic force excitation using sequential quadratic programming. Struct. Multidisc. Optim. 59, 1747–1759 (2019). https://doi.org/10.1007/s00158-018-2159-0MathSciNetCrossRef

Luo, Y., Wang, M.Y., Kang, Z.: Topology optimization of geometrically nonlinear structures based on an additive hyperelasticity technique. Comput. Methods Appl. Mech. Eng. 286, 422–441 (2015). https://doi.org/10.1016/j.cma.2014.12.023MathSciNetCrossRefMATH

Ortigosa, R., Ruiz, D., Gil, A.J., Donoso, A., Bellido, J.C.: A stabilisation approach for topology optimisation of hyperelastic structures with the SIMP method. Comput. Method. Appl. Mech. Eng. 364, 112924 (2020). https://doi.org/10.1016/j.cma.2020.112924MathSciNetCrossRefMATH

Schmidt, M.-P., Pedersen, C.B.W., Gout, C.: On structural topology optimization using graded porosity control. Struct. Multidisc. Optim. 60, 1437–1453 (2019). https://doi.org/10.1007/s00158-019-02275-xMathSciNetCrossRef

Sigmund, O.: A new class of extremal composites. J. Mech. Phys. Solids 48, 397–428 (2000). https://doi.org/10.1016/S0022-5096(99)00034-4MathSciNetCrossRefMATH

Svanberg, K.: The method of moving asymptotes—a new method for structural optimization. Int. J. Numer. Meth. Eng. 24, 359–373 (1987). https://doi.org/10.1002/nme.1620240207MathSciNetCrossRefMATH

van Dijk, N.P., Langelaar, M., van Keulen, F.: Element deformation scaling for robust geometrically nonlinear analyses in topology optimization. Struct Multidisc Optim. 50, 537–560 (2014). https://doi.org/10.1007/s00158-014-1145-4MathSciNetCrossRef

Wang, F.: Systematic design of 3D auxetic lattice materials with programmable Poisson’s ratio for finite strains. J. Mech. Phys. Solids 114, 303–318 (2018). https://doi.org/10.1016/j.jmps.2018.01.013MathSciNetCrossRef

Wang, F., Sigmund, O.: Numerical investigation of stiffness and buckling response of simple and optimized infill structures. Struct. Multidisc. Optim. 61, 2629–2639 (2020). https://doi.org/10.1007/s00158-020-02525-3MathSciNetCrossRef

Wang, F., Lazarov, B.S., Sigmund, O.: On projection methods, convergence and robust formulations in topology optimization. Struct. Multidisc. Optim. 43, 767–784 (2011). https://doi.org/10.1007/s00158-010-0602-yCrossRefMATH

Wang, F., Lazarov, B.S., Sigmund, O., Jensen, J.S.: Interpolation scheme for fictitious domain techniques and topology optimization of finite strain elastic problems. Comput. Method. Appl. Mech. Eng. 276, 453–472 (2014a). https://doi.org/10.1016/j.cma.2014.03.021MathSciNetCrossRefMATH

Wang, F., Sigmund, O., Jensen, J.S.: Design of materials with prescribed nonlinear properties. J. Mech. Phys. Sol. 69, 156–174 (2014b). https://doi.org/10.1016/j.jmps.2014.05.003MathSciNetCrossRef

Wriggers, P.: Nonlinear finite element methods. Springer, Berlin (2008)MATH

Wu, J., Clausen, A., Sigmund, O.: Minimum compliance topology optimization of shell–infill composites for additive manufacturing. Comput. Methods Appl. Mech. Eng. 326, 358–375 (2017). https://doi.org/10.1016/j.cma.2017.08.018MathSciNetCrossRefMATH

Wu, J., Aage, N., Westermann, R., Sigmund, O.: Infill optimization for additive manufacturing—approaching bone-like porous structures. IEEE Trans. Visual. Comput. Graphics. 24, 1127–1140 (2018). https://doi.org/10.1109/TVCG.2017.2655523CrossRef

Wu, J., Sigmund, O., Groen, J.P.: Topology optimization of multi-scale structures: a review. Struct. Multidisc. Optim. 63, 1455–1480 (2021). https://doi.org/10.1007/s00158-021-02881-8MathSciNetCrossRef

Xu, S., Liu, J., Huang, J., Zou, B., Ma, Y.: Multi-scale topology optimization with shell and interface layers for additive manufacturing. Addit. Manuf. 37, 101698 (2021a). https://doi.org/10.1016/j.addma.2020.101698CrossRef

Xu, S., Liu, J., Zou, B., Li, Q., Ma, Y.: Stress constrained multi-material topology optimization with the ordered SIMP method. Comput. Methods Appl. Mech. Eng. 373, 113453 (2021b). https://doi.org/10.1016/j.cma.2020.113453MathSciNetCrossRefMATH

Yan, J., Guo, X., Cheng, G.: Multi-scale concurrent material and structural design under mechanical and thermal loads. Comput Mech. 57, 437–446 (2016). https://doi.org/10.1007/s00466-015-1255-xMathSciNetCrossRefMATH

Yang, D., Liu, H., Zhang, W., Li, S.: Stress-constrained topology optimization based on maximum stress measures. Comput. Struct. 198, 23–39 (2018). https://doi.org/10.1016/j.compstruc.2018.01.008CrossRef

Yoon, G.H., Kim, Y.Y.: Element connectivity parameterization for topology optimization of geometrically nonlinear structures. Int. J. Solids Struct. 42, 1983–2009 (2005). https://doi.org/10.1016/j.ijsolstr.2004.09.005MathSciNetCrossRefMATH

Zhang, Z., Zhao, Y., Du, B., Chen, X., Yao, W.: Topology optimization of hyperelastic structures using a modified evolutionary topology optimization method. Struct. Multidisc. Optim. (2020). https://doi.org/10.1007/s00158-020-02654-9MathSciNetCrossRef

Zhang, C., Liu, J., Yuan, Z., Xu, S., Zou, B., Li, L., Ma, Y.: A novel lattice structure topology optimization method with extreme anisotropic lattice properties. J. Comput. Des. Eng. 8, 1367–1390 (2021a). https://doi.org/10.1093/jcde/qwab051CrossRef

Zhang, X., Xing, J., Liu, P., Luo, Y., Kang, Z.: Realization of full and directional band gap design by non-gradient topology optimization in acoustic metamaterials. Extreme. Mech. Lett. 42, 101126 (2021b). https://doi.org/10.1016/j.eml.2020.101126CrossRef

Zheng, J., Yang, X., Long, S.: Topology optimization with geometrically non-linear based on the element free Galerkin method. Int. J. Mech. Mater. Des. 11, 231–241 (2015). https://doi.org/10.1007/s10999-014-9257-yCrossRef

Titel: A topology optimization method for hyperelastic porous structures subject to large deformation
verfasst von: Jiaqi Huang
Shuzhi Xu
Yongsheng Ma
Jikai Liu
Publikationsdatum: 21.10.2021
Verlag: Springer Netherlands
Erschienen in: International Journal of Mechanics and Materials in Design / Ausgabe 2/2022
Print ISSN: 1569-1713
Elektronische ISSN: 1573-8841
DOI: https://doi.org/10.1007/s10999-021-09576-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2022

Evaluation of moments of performance functions based on polynomial chaos expansions

Fluid structure interaction simulation of thermal striping in a t-junction pipe made of functionally graded material

A new bidirectional algorithm for topology optimization of thermoelastic structural problems

Mode-III fracture of a nanoscale cracked hole in one-dimensional hexagonal piezoelectric quasicrystals

Equivalent damper model for honeycomb structures

Optimal design of the functional grading in elastic wear-resisting bearings: a simple analytical model

Premium Partner

Marktübersichten