nach oben

Metal Science and Heat Treatment

Erschienen in:

16.12.2023

Analysis of the Kinetics of Isothermal Bainitic Transformation in Alloy Steels

verfasst von: M. V. Maisuradze, A. A. Kuklina, D. I. Lebedev D. I., V. V. Nazarova

Erschienen in: Metal Science and Heat Treatment | Ausgabe 7-8/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Isothermal bainitic transformation is studied in commercial and experimental alloy steels of various compositions using dilatometry. The effect of the conditions of cooling to the temperature of isothermal quenching on the subsequent kinetics of the bainitic transformation is considered. The experimental kinetics of formation of bainite is described with the help of the Austin–Rickett (AR) equation. The temperature dependence of parameters n and ln (k) in the AR equation and their linear interrelationship are presented. It is shown that the dependences n = f [ln (k)] differ for steels of specific classes, and the difference may be associated with different stabilities of the supercooled austenite. It is shown that in a number of cases the kinetics of the isothermal bainitic transformation is describable adequately by the Kolmogorov–Johnson–Mehl–Avrami (KJMA) equation. The suggested differential equation generalizing the AR and KJMA equations makes it possible to describe the kinetics of formation of bainite the most accurately.

Vorheriger Artikel Size Scatter of Disperse Particles: Influence on Grain Growth

Nächster Artikel Effect of Controlled Thermomechanical Processing Routes on the Structural and Textural States of Low-Carbon Low-Alloy Steel

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

E. S. Davenport and E. C. Bain, “Transformation of austenite at constant subcritical temperatures,” Metall. Trans., 1, 3503 – 3530 (1970). https://doi.org/10.1007/BF03037892CrossRef

L. C. D. Fielding, “The bainite controversy,” Mater. Sci. Technol., 29(4), 383 – 399 (2013). https://doi.org/10.1179/1743284712Y.0000000157CrossRef

H. K. D. H. Bhadeshia, Bainite in Steels. Theory and Practice, CRC Press, USA (2015), 616 p.

E. Pereloma and D. V. Edmonds (eds.), Phase Transformations in Steels. Fundamentals and Diffusion-Controlled Transformations, Woodhead Publishing Ltd, UK (2012), 634 p.

J. W. Christian, The Theory of Transformations in Metals and Alloys, Elsevier Ltd., UK (2002), 1168 p.

H. K. D. H. Bhadeshia and R. Honeycombe, Steels: Microstructure and Properties, Elsevier Ltd., UK (2017), 461 p.

R. F. Hehemann, K. R. Kinsman, and H. I. Aaronson, “A debate on the bainite reaction,” Metall. Mater. Trans. B, 3, 1077 – 1094 (1972). https://doi.org/10.1007/BF02642439CrossRef

B. L. Bramfitt and J. G. Speer, “A perspective on the morphology of bainite,” Metall. Mater. Trans. A, 21, 817 – 829 (1990). https://doi.org/10.1007/BF02656565CrossRef

O. Hajizad, A. Kumar, Z. Li, et al., “Influence of microstructure on mechanical properties of bainitic steels in railway applications,” Metals, 9(7), 778 (2019). https://doi.org/10.3390/met9070778CrossRef

10.

M. N. Georgiev and T. V. Semenova, “Railroad rails from bainitic steel,” Metal Sci. Heat Treat., 60, 464 – 470 (2018). https://doi.org/10.1007/s11041-018-0302-6CrossRef

11.

I. Yu. Pyshmintsev, A. O. Struin, A. M. Gervasyev, et al., “Effect of bainite crystallographic texture on failure of pipe steel sheets made by controlled thermomechanical treatment,” Metallurgist, 60, 405 – 412 (2016). https://doi.org/10.1007/s11015-016-0306-7CrossRef

12.

J. Yang, D. W. Kim, S. Lee, et al., “Effects of granular bainite and polygonal ferrite on yield point phenomenon in API X65 line-pipe steels,” Mater. Sci. Eng. A, 840, 143006 (2022). https://doi.org/10.1016/j.msea.2022.143006CrossRef

13.

E. I. Khlusova, O. V. Sych, and V. V. Orlov, “Cold-resistant steels. Structure, properties, technologies,” Fiz. Met. Metalloved., 122(6), 621 – 657 (2021). https://doi.org/10.31857/S0015323021060048

14.

M. V. Maisuradze, Yu. V. Yudin, and D. I. Lebedev, “Thermal strengthening of large parts made from high-strength sparingly doped steel in air,” Steel Trans., 50, 356 – 362 (2020). https://doi.org/10.31857/S0015323021060048

15.

M. Madadi, M. Yeganeh, and M. Eskandari, “Nano-steels in the automotive industry,” in: Nanotechnology in the Automotive Industry, Elsevier Inc., UK (2022), pp. 287 – 313. https://doi.org/10.1016/B978-0-323-90524-4.00015-3

16.

R. Rana and S. B. Singh (eds.), Automotive Steels. Design, Metallurgy, Processing and Applications, Elsevier Ltd., UK (2017), 460 p.

17.

C. T. Broeck, H. Singh, and M. Hillebrecht, “Lightweight design for the future steel vehicle,” ATZ Worldwide, 114, 4 – 11 (2012). https://doi.org/10.1007/s38311-012-0203-zCrossRef

18.

Y. Liu, H. Ye, Y. Yao, and L. Zhang, “Research on microstructure and properties of automobile body steel and its development trend,” IOP Conf. Ser., Mater. Sci. Eng., 382(2), 022045 (218). https://doi.org/10.1088/1757-899X/382/2/022045

19.

W. Song, M. Lei, M. Wan, and C. Huang, “Continuous cooling transformation behavior and bainite transformation kinetics of 23CrNi3Mo carburized steel,” Metals, 11(1), 48 (2021). https://doi.org/10.3390/met11010048CrossRef

20.

M. Jiang, L.-N. Chen, J. He, et al., “Effect of controlled rolling _controlled cooling parameters on microstructure and mechanical properties of the novel pipeline steel,” Adv. Manuf., 2, 265 – 274 (2014). https://doi.org/10.1007/s40436-014-0084-zCrossRef

21.

P. C. M. Rodrigues, E. V. Pereloma, and D. V. Sandoz. “Mechanical properties of an HSLA bainitic steel subjected to controlled rolling with accelerated cooling,” Mater. Sci. Eng. A, 283(1 – 2), 136 – 143 (2000). https://doi.org/10.1016/S0921-5093(99)00795-9CrossRef

22.

S. D. Bhole and A. Friedman, “Steel wire patenting: thermal and metallurgical comparison between quenching in lead and quenching in a fluidised bed,” Int. Heat Treat. Surf. Eng., 4(4), 152 – 155 (2010). https://doi.org/10.1179/174951410X12712449937360CrossRef

23.

V. Wang, B. Liu, Q. Pan, et al., “Effect of austempering on mechanical properties of Nb/V microalloyed bainitic bearing steel,” Crystals, 12, 1001 (2022). https://doi.org/10.3390/cryst12071001CrossRef

24.

M. Carpio, J. Calvo, O. Garcia, et al., “Heat treatment design for a QP steel: Effect of partitioning temperature,” Metals, 11(7), 1136 (2021). https://doi.org/10.3390/met11071136CrossRef

25.

Z. Babasafari, A. V. Pan, F. Pahlevani, et al., “Effects of austenitizing temperature, cooling rate and isothermal temperature on overall phase transformation characteristics in high carbon steel,” J. Mater. Res. Technol., 9(6), 15286 – 15297 (2020). https://doi.org/10.1016/j.jmrt.2020.10.071CrossRef

26.

M. V. Maisuradze and M. A. Ryzhkov, “Improving the impact toughness of the HY-TUF steel by austempering,” AIP Conf. Proc., 2053, 049954 (2018). https://doi.org/10.1063/1.5084492CrossRef

27.

M. V. Maisuradze and M. A. Ryzhkov, “Thermal stabilization of austenite during quenching and partitioning of austenite for automotive steels,” Metallurgist, 62, 337 – 347 (2018). https://doi.org/10.1007/s11015-018-0666-2CrossRef

28.

M. J. Santofimia, F. G. Caballero, C. Capdevila, et al., “New model for the overall transformation kinetics of bainite, Part 1: the model,” Mater. Trans., 47(10), 2465 – 2472 (2006). https://doi.org/10.2320/matertrans.47.2465CrossRef

29.

T. Zhang, H. Yu, Z. Li, S. Kou, et al., “Progress on effects of alloying elements on bainite formation and strength and toughness of high strength steel weld metal,” Mater. Res. Express, 8(3), 032002 (2021). https://doi.org/10.1088/2053-1591/abea58CrossRef

30.

T. Sourmail and V. Smanio, “Influence of cobalt on bainite formation kinetics in 1 pct C steel,” Metall. Mater. Trans. A, 44, 1975 – 1978 (2013). https://doi.org/10.1007/s11661-013-1656-4CrossRef

31.

M. Morawiec, A. Skowroneck, A. Koz3owska, et al., “Effect of prior martensite formation on the bainite transformation kinetics in high-strength 3% Mn multiphase steel,” J. Thermal Anal. Calor., 148, 1365 (2023). https://doi.org/10.1007/s10973-22-1729-

32.

Z. Babasafari, A. V. Pan, F. Pahlevani, et al., “Kinetics of bainite transformation in multiphase high carbon low-silicon steel with and without pre-existing martensite,” Metals, 12(11), 1969 (2022). https://doi.org/10.3390/met12111969CrossRef

33.

G. Łukaszewicz, K. Wastak, E. K. Skołek, et al., “Influence of intermediate annealing treatment on the kinetics of bainitic transformation in X37CrMoV5-1 steel,” Materials, 14(16), 4411 (2021). https://doi.org/10.3390/ma14164411CrossRef

34.

M. J. Starink, “Kinetic equations for diffusion-controlled precipitation reactions,” J. Mater. Sci., 32, 4061 – 4070 (1997). https://doi.org/10.1023/A:1018649823542CrossRef

35.

J. C. Zhu, X. Sun, G. C. Barber, et al., “Bainite transformation-kinetics-microstructure characterization of austempered 4140 steel,” Metals, 10(2), 236 (2020). https://doi.org/10.3390/met10020236CrossRef

36.

M. Avami, “Kinetics of phase change. I. General theory,” J. Chem. Phys., 7(12), 1103 – 1132 (1939). https://doi.org/10.1063/1.1750380CrossRef

37.

J. Cai and R. Liu, “Weibull mixture model for modeling nonisothermal kinetics of thermally stimulated solid-state reactions: Application to simulated and real kinetic conversion data,” J. Phys. Chem., 111(36), 10681 – 10686 (2007). https://doi.org/10.1021/jp0737092CrossRef

38.

Yu. V. Yudin, M. V. Maisuradze, and A. A. Kuklina, “Describing the isothermal bainitic transformation in structural steels by a logistical function,” 47(3), 213 – 218 (2017). https://doi.org/10.3103/S0967091217030160

39.

T. A. Kop, J. Sietsma, and S. Van Der Zwaag, “Dilatometric analysis of phase transformations in hypo-eutectoid steels,” J. Mater. Sci., 36, 519 – 526 (2001). https://doi.org/10.1023/A:1004805402404CrossRef

40.

M. V. Maisuradze, Yu. V. Yudin, and A. A. Kuklina, “Increase in impact strength during bainite structure formation in HY-TUF high-strength steel,” Metallurgist, 63, 849 – 859 (2019). https://doi.org/10.1007/s11015-019-00899-4CrossRef

41.

M. V. Maisuradze, Yu. V. Yudin, and A. A. Kuklina, “Novel approach for analytical description of the isothermal bainite transformation in alloyed steels,” Mater. Perform. Charact., 8(2), 80 – 95 (2018). https://doi.org/10.1520/MPC20170168CrossRef

42.

S. A. Khan and H. K. D. H. Bhadeshia, “The bainite transformation in chemically-heterogeneous 300M high-strength steel,” Metall. Trans. A, 21, 859 – 875 (1990). https://doi.org/10.1007/BF02656570CrossRef

43.

A. A. Kuklina, M. V. Maisuradze, and Yu. V. Yudin, “Analytical description of the bainite transformation kinetics in steels 300M and D6AC,” Mater. Sci. Forum, 907, 31 – 37 (2017). https://doi.org/10.4028/www.scientific.net/MSF.907.31CrossRef

Titel: Analysis of the Kinetics of Isothermal Bainitic Transformation in Alloy Steels
verfasst von: M. V. Maisuradze
A. A. Kuklina
D. I. Lebedev D. I.
V. V. Nazarova
Publikationsdatum: 16.12.2023
Verlag: Springer US
Erschienen in: Metal Science and Heat Treatment / Ausgabe 7-8/2023
Print ISSN: 0026-0673
Elektronische ISSN: 1573-8973
DOI: https://doi.org/10.1007/s11041-023-00958-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7-8/2023

Effect of Heat Treatment on Microstructure and Hardness of a High-Chromium Cast Iron Roll

Size Scatter of Disperse Particles: Influence on Grain Growth

Structure and Phase Composition of Heat Treated Al – Zr Bimetal

Investigation of the Processes of Formation and Properties of Titanium Nickelides Welded on Titanium

Formation of Structure and Properties of Low-Carbon Bainite in Steel 08KhFA

Analysis of the Anomalous Effect of Heat Treatment on the Structure and Phase Transformations in High-Chromium Tool Steel

Premium Partner

Marktübersichten