nach oben

European Journal of Wood and Wood Products

Erschienen in:

22.12.2023 | Original Article

Assessing the deformation energy of timber-to-timber inclined screw connections via computed tomography scan

verfasst von: Angelo Aloisio, Dag Pasquale Pasca, Yuri De Santis, Massimo Fragiacomo, Jonas Ljungdahl

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 2/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Inclined screws represent a typical connection solution for timber structures. They can provide higher capacity and stiffness due to the combined axial-shear interaction. This paper investigates the effect of engineering wood products choice (glued-laminated timber and cross-laminated timber), fibre inclination, friction, and interlayers on the capacity and deformation energy of timber-to-timber screwed connection with inclined screws. First, the authors carried out thirty push-out tests with inclined screws considering six structural configurations. Then, through X-ray computed tomography (CT) and threshold-based image segmentation, they assessed the deformed configuration of the screws to isolate the screw and timber contributions to the total deformation energy. The deformed shape of the connectors, fitted by a six-order polynomial, provides an estimate of the connection bending deformation assuming an elasto-plastic stress–strain constitutive for steel. By subtraction, the authors separately evaluated the role of timber embedment and steel deformation in the overall energy deformation in all the tested configurations. The experimental results revealed that most deformation energy comes from the screwed connection without interlayer, while the remaining can be attributed to timber plasticization. Conversely, the presence of the interlayer significantly unbalances such contribution, considerably reducing the role of timber plasticization.

Vorheriger Artikel Wood properties of mature loblolly pine grown in Hawaii, North Carolina, and Mississippi: impacts of climate conditions on specific gravity and chemical composition

Nächster Artikel Simulation analysis of the circular sawing process of medium density fiberboard (MDF) based on the Johnson–Cook model

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Abdeljaber O, Habite T, Olsson A (2023) Automatic estimation of annual ring profiles in Norway spruce timber boards using optical scanning and deep learning. Comput Struct 275:106912CrossRef

Aloisio A, De Santis Y, Pelliciari M, Rosso MM, Fragiacomo M, Tomasi R (2023) Buckling capacity model for timber screws loaded in compression: experimental, analytical and fe investigations. Constr Build Mater 379:131225CrossRef

Aloisio A, Fragiacomo M (2021) Reliability-based overstrength factors of cross-laminated timber shear walls for seismic design. Eng Struct 228:111547CrossRef

Bedon C, Fragiacomo M (2019) umerical analysis of timber-to-timber joints and composite beams with inclined self-tapping screws. Composite Structures, 207:13–28. Retrieved from https://doi.org/10.1016/j.compstruct.2018.09.008

Benedetti F, Rosales V, Opazo-Vega A, Norambuena-Contreras J, Jara-Cisterna A (2019) Experimental and numerical evaluation of hold-down connections on radiata pine cross-laminated-timber shear walls: a case study in chile. Eur J Wood Prod 77(1):79–92. https://doi.org/10.1007/s00107-018-1365-1CrossRef

Biswas S, Vijayan K (1992) Friction and wear of ptfe-a review. Wear 158(1–2):193–211CrossRef

Björngrim N, Myronycheva O, Fjellström P-A (2022) The use of large-scale x-ray computed tomography for the evaluation of damaged structural elements from an old timber bridge. Wood Mater Sci Eng 17(6):1028–1029CrossRef

Blaß HJ, Bejtka I, Uibel T (2006) Tragfähigkeit von Verbindungen mit selbstbohrenden Holzschrauben mit Vollgewinde. (Load-bearing capacity of connections with self-drilling wood screws with full thread) (In German). Karlsruher Berichte zum Ingenieurholzbau, Vol. 4, Lehrstuhl für Ingenieurholzbau und Baukonstruktionen (Hrsg.), Universitätsverlag Karlsruhe, 2006, ISSN: 1860-093X, (ISBN: 3-86644-034-0)

Blaß HJ, Laskewitz B (2000) Joints with inclined screws. In: CIB-W18, pages 33–7–6. Delft (The Netherlands)

Blass HJ, Sandhaas C, Meyer N (2017) Steel-to-timber connections : Failure of laterally loaded dowel-type fasteners. In Proceedings of the International Network on Timber Engineering Research, Inter 2017, Meeting 50, Kyoto, Japan, 28th - 31st August 2017. Ed.: R. Görlacher. Timber Scientific Publishing

Brandner R, Flatscher G, Ringhofer A, Schickhofer G, Thiel A (2016) Cross laminated timber (clt): overview and development. Eur J Wood Prod 74(3):331–351CrossRef

Brown J, Li M, Palermo A, Pampanin S, Sarti F (2023) Analytical modeling of posttensioned C-Shaped CLT core walls. J Struct Eng 149(3):04023009CrossRef

Ceccotti A, Sandhaas C, Okabe M, Yasumura M, Minowa C, Kawai N (2013) Sofie project-3d shaking table test on a seven-storey full-scale cross-laminated timber building. Earthq Eng Struct Dyn 42(13):2003–2021CrossRef

CEN (1998) Eurocode 8. Design of Structures for Earthquake Resistance -Part 3: Assessment and retrofitting of buildings

Chen G, He B (2017) Stress-strain constitutive relation of OSB under axial loading: An experimental investigation. BioResources, 12(3):6142–6156. https://doi.org/10.15376/biores.12.3.6142-6156

Claus T, Seim W, Küllmer J (2022) Force distribution in self-tapping screws: experimental investigations with fibre bragg grating measurement screws. Eur J Wood Prod 80(1):183–197CrossRef

Connolly T, Loss C, Iqbal A, Tannert T (2018) Feasibility study of mass-timber cores for the ubc tall wood building. Buildings 8(8):98. https://doi.org/10.3390/buildings8080098CrossRef

Couceiro J (2016) Wood shrinkage in CT-scanning analysis. Doctoral dissertation, Luleå tekniska universitet, Luleå (ISSN 1402-1757)

De Santis Y, Aloisio A, Gavrić I, Šušteršič I, Fragiacomo M (2023) Timber-to-steel inclined screws connections with interlayers: Experimental investigation, analytical and finite element modelling. Engineering Structures, 292:116504. Retrieved from https://www.sciencedirect.com/science/article/pii/S0141029623009197https://doi.org/10.1016/j.engstruct.2023.116504

De Santis Y, Fragiacomo M (2021) Timber-to-timber and steel-to-timber screw connections : Derivation of the slip modulus via beam on elastic foundation model. Engineering Structures, 244(April):112798. Retrieved from https://doi.org/10.1016/j.engstruct.2021.112798

De Santis Y, Sciomenta M, Spera L, Rinaldi V, Fragiacomo M, Bedon C (2022) Effect of interlayer and inclined screw arrangements on the load-bearing capacity of timber-concrete composite connections. Buildings, 12(12). Retrieved from https://www.mdpi.com/2075-5309/12/12/2076https://doi.org/10.3390/buildings12122076

Dong W, Li M, Ottenhaus LM, Lim H (2020) Ductility and overstrength of nailed CLT hold-down connections. Engineering Structures, 215(February):110667. Retrieved from https://doi.org/10.1016/j.engstruct.2020.110667

Ekevad M (2004) Method to compute fiber directions in wood from computed tomography images. J Wood Sci 50(1):41–46. https://doi.org/10.1007/s10086-003-0524-zCrossRef

EN-26891 (1991) Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics. CEN

Entacher K, Hegenbart S, Kerschbaumer J, Lenz C, Planitzer D, Seidel M, Uhl A, Weiglmaier R (2008) Pith detection on ct-cross-section images of logs: an experimental comparison. In: 3rd International Symposium on Communications, Control and Signal Processing. Saint Julian's, Malta, pp 478–483. https://doi.org/10.1109/ISCCSP.2008.4537273CrossRef

ETA-11/0030 (2022) Screws and threaded rods for use in timber constructions. EOTA

Eurocode-5 (2004) Design of timber structures - Part 1-1: General - Common rules and rules for buildings. CEN

Florisson S, Hansson L, Couceiro J, Sandberg D (2022) Macroscopic x-ray computed tomography aided numerical modelling of moisture flow in sawn timber. Eur J Wood Prod 80(6):1351–1365CrossRef

Fragiacomo M, Dujic B, Sustersic I (2011) Elastic and ductile design of multi-storey crosslam massive wooden buildings under seismic actions. Eng Struct 33(11):3043–3053CrossRef

Gavric I, Fragiacomo M, Ceccotti A (2012) Strength and deformation characteristics of typical x-lam connections. In World Conference on Timber Engineering, pages 146–155

Gavric I, Fragiacomo M, Ceccotti A (2015) Cyclic behavior of clt wall systems: Experimental tests and analytical prediction models. J Struct Eng 141(11):04015034CrossRef

Hansson L, Couceiro J, Fjellner B-A (2017) Estimation of shrinkage coefficients in radial and tangential directions from ct images. Wood Mat Sci Eng 12(4):251–256. https://doi.org/10.1080/17480272.2016.1249405CrossRef

Hansson L, Fjellner B-A (2013) Wood shrinkage coefficient and dry weight moisture content estimations from ct-images. Pro Ligno 9(4):557–561

Hassanieh A, Valipour HR, Bradford MA (2016) Load-slip behaviour of steel-cross laminated timber (CLT) composite connections. J Constr Steel Res 122:110–121. https://doi.org/10.1016/j.jcsr.2016.03.008CrossRef

Hossain A, Danzig I, Tannert T (2016) Cross-Laminated Timber Shear Connections with Double-Angled Self-Tapping Screw Assemblies. J Struct Eng 142(11):04016099. https://doi.org/10.1061/(asce)st.1943-541x.0001572CrossRef

Huber JA, Broman O, Ekevad M, Oja J, Hansson L (2022) A method for generating finite element models of wood boards from x-ray computed tomography scans. Computers & Structures 260:106702CrossRef

Huber JAJ, Broman O, Oja J, Hansson L, Ekevad M (2022b) Nondestructive testing of timber prior to sawing using finite element models based on x-ray computed tomography data-a preliminary study. In 22nd International Nondestructive Testing and Evaluation of Wood Symposium, Quebec City, Quebec, Canada, May 24-27, 2022, pages 200–200. United States Department of Agriculture

Bejtka HBI (2002) Joints with inclined screws. In CIB-W18, pages 35–7–5. Kyoto (Japan)

Izzi M, Casagrande D, Bezzi S, Pasca D, Follesa M, Tomasi R (2018) Seismic behaviour of cross-laminated timber structures: A state-of-the-art review. Eng Struct 170:42–52CrossRef

Izzi M, Rinaldin G, Polastri A, Fragiacomo M (2018b) A hysteresis model for timber joints with dowel-type fasteners. Engineering Structures, 157(July 2017):170–178. Retrieved from https://doi.org/10.1016/j.engstruct.2017.12.011

Johansen K (1949) Theory of timber connections. International Association of Bridge and Structural Engineering 9:249–262. https://doi.org/10.5169/seals-9703CrossRef

Johansson E, Johansson D, Skog J, Fredriksson M (2013) Automated knot detection for high speed computed tomography on pinus sylvestris l. and picea abies (l.) karst. using ellipse fitting in concentric surfaces. Comput Electron Agric 96:238–245. https://doi.org/10.1016/j.compag.2013.06.003CrossRef

Johansson J, Hagman O, Fjellner B-A (2003) Predicting moisture content and density distribution of scots pine by microwave scanning of sawn timber. J Wood Sci 49:312–316CrossRef

Krauss K, Li M, Lam F (2023) Influence of mixed-angle screw installations in clt on the cyclic performance of commercial hold-down connections. Constr Build Mater 364:129918CrossRef

Krähenbühl A, Kerautret B, Debled-Rennesson I, Longuetaud F, Mothe F (2012) Knot detection in x-ray ct images of wood. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7432 LNCS(PART 2), 209-218. https://doi.org/10.1007/978-3-642-33191-6_21

Lemaitre R, Bocquet J-F, Schweigler M, Bader TK (2019) Beam-on-foundation modelling as an alternative design method for timber joints with dowel-type fasteners - Part 1: Strength and stiffness per shear plane of single-fastener joints. Inter / 54-7-8, (1949):1–16. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-89340

Lindgren O (1992) Medical ct-scanners for non-destructive wood density and moisture content measurements. Doctoral dissertation, Luleå tekniska universitet, Luleå. (ISSN 0348-8373)

Longuetaud F, Leban J-M, Mothe F, Kerrien E, Berger M-O (2004) Automatic detection of pith on ct images of spruce logs. Comput Electron Agric 44(2):107–119. https://doi.org/10.1016/j.compag.2004.03.005CrossRef

Longuetaud F, Mothe F, Kerautret B, Krähenbühl A, Hory L, Leban J, Debled-Rennesson I (2012) Automatic knot detection and measurements from x-ray ct images of wood: A review and validation of an improved algorithm on softwood samples. Comput Electron Agric 85:77–89. https://doi.org/10.1016/j.compag.2012.03.013CrossRef

Loss C, Hossain A, Tannert T (2018) Simple cross-laminated timber shear connections with spatially arranged screws. Eng Struct 173:340–356. https://doi.org/10.1016/j.engstruct.2018.07.004CrossRef

Matsubara D, Wakashima Y, Fujisawa Y, Shimizu H, Kitamori A, Ishikawa K (2017) Relationship between clamp force and pull-out strength in lag screw timber joints. J Wood Sci 63:625–634CrossRef

Ottenhaus LM, Li M, Smith T (2018a) Structural performance of large-scale dowelled CLT connections under monotonic and cyclic loading. Engineering Structures, 176(April):41–48. Retrieved from https://doi.org/10.1016/j.engstruct.2018.09.002

Ottenhaus L-M, Li M, Smith T (2018) Structural performance of large-scale dowelled clt connections under monotonic and cyclic loading. Eng Struct 176:41–48. https://doi.org/10.1016/j.engstruct.2018.09.002CrossRef

Ottenhaus L-M, Li M, Smith T, Quenneville P (2018) Overstrength of dowelled clt connections under monotonic and cyclic loading. Bull Earthq Eng 16(2):753–773. https://doi.org/10.1007/s10518-017-0221-8CrossRef

Oudjene M, Meghlat EM, Ait-Aider H, Lardeur P, Khelifa M, Batoz JL (2018) Finite element modelling of the nonlinear load-slip behaviour of full-scale timber-to-concrete composite T-shaped beams. Composite Structures, 196(March):117–126. Retrieved from https://doi.org/10.1016/j.compstruct.2018.04.079

Parracha J, Pereira M, Maurício A, Faria P, Lima DF, Tenório M, Nunes L (2021) Assessment of the density loss in anobiid infested pine using x-ray micro-computed tomography. Buildings 11(4):173CrossRef

Parracha JLCR, Pereira MF, Maurício A, Machado JS, Faria P, Nunes L (2019) It’s what’s inside that counts: An assessment method to measure the residual strength of anobiids infested timber using micro-computed tomography. In SHATiS19-5th International Conference on Structural Health Assessment of Timber Structures, pages 485–494

Polastri A, Giongo I, Piazza M (2017) An innovative connection system for cross-laminated timber structures. Struct Eng Int 27(4):502–511. https://doi.org/10.2749/222137917X14881937844649CrossRef

Rais A, Ursella E, Vicario E, Giudiceandrea F (2017) The use of the first industrial x-ray ct scanner increases the lumber recovery value: case study on visually strength-graded douglas-fir timber. Ann For Sci 74(2):1–9CrossRef

Sandberg K, Salin J-G (2012) Liquid water absorption in dried norway spruce timber measured with ct scanning and viewed as a percolation process. Wood Sci Technol 46(1–3):207–219. https://doi.org/10.1007/s00226-010-0371-1CrossRef

Schick M, Seim W, Kruger S (2016) Dowel-type fasteners with small diameters–review and improvement of design formulations. In Proceedings of the WCTE 2016 World Conference on Timber Engineering, Vienna/Austria, August 22, volume 25, page 2016

Schweigler M, Bader TK, Hochreiner G, Lemaître R (2018) Parameterization equations for the nonlinear connection slip applied to the anisotropic embedment behavior of wood. Composites Part B: Engineering 142(November 2017):142–158. https://doi.org/10.1016/j.compositesb.2018.01.003

Sepúlveda P (2001) Measurement of spiral grain with computed tomography. J Wood Sci 47:289–293CrossRef

Sepúlveda P, Oja J, Grönlund A (2002) Predicting spiral grain by computed tomography of norway spruce. Journal ofWood Science 48(6):479–483. https://doi.org/10.1007/BF00766643CrossRef

Shapiro L, Stockman GC (2001) Computer Vision. Prentice Hall PTR, Upper Saddle River, NJ, USA

Stamatopoulos H, Malo KA (2016) Withdrawal stiffness of threaded rods embedded in timber elements. Construction and Building Materials 116:263–272. Retrieved from https://doi.org/10.1016/j.conbuildmat.2016.04.144

Sustersic I, Dujic B, Fragiacomo M (2014) Influence of the connection modelling on the seismic behaviour of crosslam timber buildings. In Materials and Joints in Timber Structures: Recent Developments of Technology, pages 677–687. Springer

Tannert T, Eng P (2019) Design provisions for cross-laminated timber structures. Structures Congress 2019: Buildings and Natural Disasters. American Society of Civil Engineers Reston, VA, pp 171–178CrossRef

Tomasi R, Crosatti A, Piazza M (2010) Theoretical and experimental analysis of timber-to-timber joints connected with inclined screws. Construction and Building Materials, 24(9):1560–1571. Retrieved from https://doi.org/10.1016/j.conbuildmat.2010.03.007

Trautz M, Grizmann D, Pranjic A, Raupach M, Glawe C, Gillner A, Bornschlegel B, Haasler D (2023) Laser predrilling for high-precision positioning and installation of fully threaded screws in glued-laminated timber (glulam). Wood Material Science & Engineering 18(2):491–506CrossRef

van de Lindt JW, Amini MO, Rammer D, Line P, Pei S, Popovski M (2020) Seismic performance factors for cross-laminated timber shear wall systems in the united states. J Struct Eng 146(9):04020172CrossRef

van Kaick G, Delorme S (2005) Computed tomography in various fields outside medicine. Eur Radiol Suppl 15:d74–d81CrossRef

Watanabe K, Lazarescu C, Shida S, Avramidis S (2012) A novel method of measuring moisture content distribution in timber during drying using ct scanning and image processing techniques. Drying Technol 30(3):256–262. https://doi.org/10.1080/07373937.2011.634977CrossRef

Zhang X, Popovski M, Tannert T (2018) High-capacity hold-down for mass-timber buildings. Constr Build Mater 164:688–703. https://doi.org/10.1016/j.conbuildmat.2018.01.019CrossRef

Titel: Assessing the deformation energy of timber-to-timber inclined screw connections via computed tomography scan
verfasst von: Angelo Aloisio
Dag Pasquale Pasca
Yuri De Santis
Massimo Fragiacomo
Jonas Ljungdahl
Publikationsdatum: 22.12.2023
Verlag: Springer Berlin Heidelberg
Erschienen in: European Journal of Wood and Wood Products / Ausgabe 2/2024
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-023-02028-0

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2024

Physical-mechanical properties of bamboo scrimbers with response to surface layer modification: thermal treatment and resin dosage

Acoustic and viscoelastic properties of string instrument fretboards made of radiata pine by densification and impregnation with furfuryl alcohol resin

Big data analysis on manufacturing variables affecting properties of medium density fiberboard

Effects of extracts on color, dimensional stability, and decay resistance of thermally modified wood

Thermochemical modification of beech wood with ammonium hydroxide

Evaluation of the bonding process and interlaminar shear properties of hybrid cross-laminated timber prepared with larch and OSB