nach oben

Bulletin of Engineering Geology and the Environment

Erschienen in:

01.05.2015 | Original Paper

Assessing the stripping properties of granite aggregates in bituminous mixtures

verfasst von: Murat Yılmaz, Atiye Tugrul, Mustafa Karasahin, Ismail Boz

Erschienen in: Bulletin of Engineering Geology and the Environment | Ausgabe 2/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The properties of aggregates in asphalt pavements are an important influence on the service lives of pavements. Aggregates should be covered by bitumen film and the film should remain stable under the effects of water and traffic loads. We studied the stripping behavior of eight different types of granitic rock in bituminous mixtures. First, we conducted petrographic examinations and mineralogical and chemical analyses of the samples. Surface roughness and surface tension tests were then performed. Finally, stripping and pull-out tests were conducted on the granite aggregates. We found that the stripping caused by water is dictated by mineralogical and chemical composition and surface tension, whereas the stripping caused by traffic loads is controlled by mineralogical and chemical composition and the surface roughness of granite aggregates.

Vorheriger Artikel Plotting aggregate degradation results from the Los Angeles test on a triangular diagram: proposal of a new quality ranking for aggregates

Nächster Artikel Rory Mortimore: Logging the Chalk

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Abo-Qudais S, Al-Shweily H (2007) Effect of aggregate properties on asphalt mixtures stripping and creep behavior. Constr Build Mater 21:1886–1898CrossRef

Bagampadde U, Isacsson U, Kiggundu BM (2006) Impact of bitumen and aggregate composition on stripping in bituminous mixtures. Mater Struct 39:303–315CrossRef

Bell FG (1998) Engineering geology. Blackwell, London, p 359

Bhasin A, Little D (2006) Texas Transportation Institute. Texas A&M University, College Station

Byerlee JD (1966) The frictional characteristics of westerly granites. Ph.D. thesis. Massachusetts Institute of Technology, Cambridge, p 179

Cox KG, Bell JD, Pankhurst RJ (1979) The interpretation of igneous rocks. George Allen and Unwin, London, p 450

Das SK (2004) Evaluation of asphalt––aggregate bond and stripping potential. MSc in Civil Engineering. Texas Tech University, Lubbock, p 86

Geber R, Gömze LA (2009) Investigation of hydrophilic and hydrophobic properties of different mineral fillers for asphalt mixtures. In: Proc 11th ECERS Conf, Krakow, Poland, 21–25 June 2009, pp 945–950

Gürer C (2010) Sathi kaplamaların performansına etki eden parametrelerin güncellenmesi ve performans modeli geliştirilmesi. Fen Bilimleri Enstitüsü, Doktora Tezi, p 204

Hartley A (1974) A review of the geologial factors influencing the mechanical properties of road surface aggregates. Q J Eng Geol 7:69–100CrossRef

Hefer AW, Little D (2005) Adhesion in bitumen-aggregate systems and quantification of the effects of water on the adhesive bond. ICAR project no. ICAR 505:220. International Center for Aggregates Research, Austin

Hutchinson CS (1974) Laboratory handbook of petrographic techniques. Wiley, New York, p 527

Ibrahim H, Wahhab AA, Hasnaint J (1998) Laboratory study of asphalt concrete durability in Jeddah. Build Environ 33:219–230CrossRef

LeMaitre RW, Bateman P, Dudek A, Keller J, Lameyre J, LeBas MJ, Sabine PA, Schmid R, Sorensen H, Streckeisen A, Woolley AR, Zanettin B (1989) A classification of igneous rocks and glossary of terms: recommendations of the International Union of Geological Sciences Subcommission on the Systematics of Igneous Rocks. Blackwell Scıentific, Cambridge, p 192

Lyne AL, Redelius P, Collin M, Birgisson B (2013) Characterization of stripping properties of stone material in asphalt. Mater Struct 46:47–61CrossRef

Robert RL, Kandhal PS, Brown ER, Lee D, Kennedy TW (1999) Hot mix asphalt materials, mixtures, design, and construction, 1st edn. NAPA Education Foundation, Lanham, p 490

Smith MR, Collis L (2001) Aggregates: sand, gravel and crushed rock aggregates for construction purposes. Engineering Geology Special Publication. Geological Society, London, p 360

Senadheera S, Wmitock R, Hossain MS, Yazgan B, Das S (2006) A testing and evaluation protocol to assess seal coat binder–aggregate compatibility. Project Summary Report 0-4362-S. Center for Multidisciplinary Research in Transportation, Texas Tech University, Lubbock, p 150

Türk Standartları Enstitüsü (2006) TS EN 2719: Petrol ürünleri ve yağlayıcılar-Parlama noktası tayini-Pensky martens kapalı kap metodu. Türk Standartları Enstitüsü, Ankara, p 33

Türk Standartları Enstitüsü (2006) TS EN 12697-11: Bitümlü Karışımlar-Deney Metotları-Sıcak Karışımlı Asfalt için-Bölüm 11: Agrega ve Bitüm Arasındaki Bağlanmanın Tayini. Türk Standartları Enstitüsü, Ankara, p 28

Türk Standartları Enstitüsü (2008) TS EN 1426: Bitüm ve bitümlü bağlayıcılar-İğne batma derinliği tayini. Türk Standartları Enstitüsü, Ankara, pp 16

Türk Standartları Enstitüsü (2008) TS EN 1427: Bitüm ve bitümlü bağlayıcılar-Yumuşama noktası tayini-Halka ve bilye yöntemi. Türk Standartları Enstitüsü, Ankara, pp 16

Türk Standartları Enstitüsü (2008) TS EN 12592: Bitüm ve bitümlü bağlayıcılar-Çözünürlük tayini. Türk Standartları Enstitüsü, Ankara, pp 11

Türk Standartları Enstitüsü (2008) TS EN 12607-2: Bitüm ve bitümlü bağlayıcılar-Isı ve hava etkisi altında sertleşme direncinin tayini-Bölüm 2:TFOT yöntemi. Türk Standartları Enstitüsü, Ankara, pp 12

Türk Standartları Enstitüsü (2009) TS EN 13589: Bitümler ve bitümlü bağlayıcılar-İşlem görmüş bitümlerin çekme özelliklerinin duktilometre metoduyla tayini. Türk Standartları Enstitüsü, Ankara, pp 11

Streckeisen A (1979) Classification and nomenclature of igneous rocks. Neues Jahrbuch für Mineralogie – Abhandlungen 107:144–240

Tompkins DG (1972) Durability and adhesive properties of bitumen–aggregate mixes. Bituminous materials for flexible pavements, residual course. Department of Civil Engineering, University of Nottingham, Nottingham, p 57

Yılmaz M (2012) Granitik kayaçların sıcak asfalt karışımlarında agrega olarak kullanılabilirliği. İÜ Fen Bilimleri Enstitüsü, İstanbul, p 148

Wei Z, Xu H, Shaopeng W, Jizhe Z (2011) Effect of different antistripping measures on adhesion between granite and asphalt. In: Proc ICETCE 2011, Lushan, China, 22–24 Apr 2011, p 258–261

Wilson M (1989) Igneous petrogenesis. Unwin Hyman, London, p 466CrossRef

Titel: Assessing the stripping properties of granite aggregates in bituminous mixtures
verfasst von: Murat Yılmaz
Atiye Tugrul
Mustafa Karasahin
Ismail Boz
Publikationsdatum: 01.05.2015
Verlag: Springer Berlin Heidelberg
Erschienen in: Bulletin of Engineering Geology and the Environment / Ausgabe 2/2015
Print ISSN: 1435-9529
Elektronische ISSN: 1435-9537
DOI: https://doi.org/10.1007/s10064-014-0631-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 2/2015

GIS-based landslide susceptibility zonation using bivariate statistical and expert approaches in the city of Constantine (Northeast Algeria)

Security monitoring of a large-scale and complex accumulation slope: an application in the Xiluodu hydropower station

Evaluating the quality of landslide inventory maps: comparison between archive and surveyed inventories for the Daunia region (Apulia, Southern Italy)

Efficiency of quicklime in reducing the swelling potential of pulverized expansive shale, Northern Jeddah, Saudi Arabia

Analysis of viscoelastic behaviour of rock salt using hydraulic cylinder test

Fluid-driven fractures in granular materials