nach oben

Journal of Materials Engineering and Performance

Erschienen in:

27.07.2021

Ballistic Efficiency of Multilayered Armor System Reinforced with Jute-Kevlar Epoxy Composite against High-Energy Steel Core Projectile

verfasst von: Saurabh Kumar, Asif Malek, Rajesh Babu, Shikhar Mathur

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 11/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

For protection against high velocity projectile such as 7.62 mm or 5.56 mm, multilayered armor system (MAS) is suitably the best option. In the present work, the experimental study on MAS with a front Al₂O₃ ceramic tile followed by a composite of jute and kevlar reinforced with epoxy matrix has been studied. The analytical result has found to meet the performance requirement as specified by NIJ0101.06 when tested against 7.62 mm hard steel core (HSC) and mild steel core (MSC) projectile. It was found that all MAS with double ceramic tile has successfully defeated HSC and MSC projectile with maximum observed back face signature (BFS) as 26.71 mm and 28.70 mm, respectively. In case of single monolithic ceramic, 25.80 mm and 35.12 mm were the maximum observed BFS against HSC and MSC projectile. The extent of projectile damage has been more in HSC when compared to the MSC. Blunt erosion and core breakage were peculiar observations in HSC core, whereas a mushrooming and bulging were observed in MSC core. Macro- and SEM analysis of MAS has been studied to understand the energy dissipation and failure mechanism.

Vorheriger Artikel Effect of Mo Content on the Thermal Conductivity and Corrosion Resistance of Die Steel

Nächster Artikel Cycleability of Tetraethylene Glycol Dimethyl Ether-LiPF6/Polyvinylidene Fluoride Hybrid Electrolytes Reinforced with SiO2 Nanoparticles in Li-O2 Batteries

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

M. Grujicic, B. Pandurangan and B. d’Entremont, The Role of Adhesive in the Ballistic/Structural Performance of Ceramic/Polymer-Matrix Composite Hybrid Armor, Mater. Des., 2012, 41, p 380–393. https://doi.org/10.1016/j.matdes.2012.05.023CrossRef

C. Kaufmann, D. Cronin, M. Worswick, G. Pageau and A. Beth, Influence of Material Properties on the Ballistic Performance of Ceramics for Personal Body Armour, Shock. Vib., 2003, 10, p 357637. https://doi.org/10.1155/2003/357637CrossRef

A. Tabiei and G. Nilakantan, Ballistic Impact of Dry Woven Fabric Composites: A Review, Appl. Mech. Rev., 2008, 61(01), p 010801. https://doi.org/10.1115/1.2821711CrossRef

Z. Stempień, Effect of Velocity of the Structure-Dependent Tension Wave Propagation on Ballistic Performance of Aramid Woven Fabrics, Fibres Textiles East. Eur., 2011, 19(4), p 74–80.

B.A. Cheeseman and T.A. Bogetti, Ballistic Impact into Fabric and Compliant Composite Laminates, Compos. Struct., 2003, 61(1-2), p 161–173. https://doi.org/10.1016/S0263-8223(03)00029-1CrossRef

W.D. Callister Jr. and D.G. Rethwisch, Materials Science and Engineering: An Introduction, 8th ed. Wiley, New Jersy, 2010.

F.S. da Luz, E.P.L. Junior, L.H.L. Louro and S.N. Monteiro, Ballistic Test of Multilayered Armor with Intermediate Epoxy Composite Reinforced with Jute Fabric, Mater. Res., 2015, 18(Suppl 2), p 170–177. https://doi.org/10.1590/1516-1439.358914CrossRef

R.B. da Cruz, E.P.L. Junior, S.N. Monteiro and L.H.L. Louro, Giant Bamboo Fiber Reinforced Epoxy Composite in Multilayered Ballistic Armor, Mater. Res., 2015, 18(Suppl 2), p 70–75. https://doi.org/10.1590/1516-1439.347514CrossRef

S.N. Monteiro, J.W. Drelich, H.A.C. Lopera, L.F.C. Nascimento, F.S. da Luz, L.C. da Silva, J.L. dos Santos, F. da Costa Garcia, F.S. de Filho, É.P.L. Assis, A.C. Pereira, N.T. Simonassi, M.S. Oliveira, L.C. da Cruz Demosthenes, U.O. Costa, R.H.M. Reis and W.B.A. Bezerra, Natural Fibers Reinforced Polymer Composites Applied in Ballistic Multilayered Armor for Personal Protection—An Overview, Green Mater. Eng. Miner., Metals Mater. Ser., 2019 https://doi.org/10.1007/978-3-030-10383-5_4CrossRef

10.

L.A. Rohen, F.M. Margem, S.N. Monteiro, C.M.F. Vieira, B.M. de Araujo and E.S. Lima, Ballistic Efficiency of an individual epoxy Composite Reinforced with Sisal Fibers in Multilayered Armor, Mater. Res., 2015, 18(Suppl 2), p 55–62. https://doi.org/10.1590/1516-1439.346314CrossRef

11.

S.N. Monteiro, T.L. Milanezi, L.H.L. Louro, É.P. Lima Jr., F.O. Braga, A.V. Gomes and J.W. Drelich, Novel Ballistic Ramie Fabric Composite Competing with Kevlar^TM Fabric in Multilayered Armor, Mater. Des., 2016, 96, p 263–269. https://doi.org/10.1016/j.matdes.2016.02.024CrossRef

12.

F.O. de Braga, L.T. Bolzan, F.J.H.T.V. Ramos, S.N. Monteiro, É.P. Lima and L.C. da Silva, Ballistic Efficiency of Multilayered Armor Systems with Sisal Fiber Polyester Composites, Mater. Res., 2017, 20(Suppl 2), p 767–774. https://doi.org/10.1590/1980-5373-MR-2017-1002CrossRef

13.

S.N. Monteiro, V.S. Candido, F.O. Braga, L.T. Bolzan, R.P. Weber and J.W. Drelich, Sugarcane Bagasse Waste in Composites for Multilayered Armor, Eur. Polym. J., 2016, 78, p 173–185. https://doi.org/10.1016/j.eurpolymj.2016.03.031CrossRef

14.

J.F.C. Lara, E.A.F. Johnson, A.V. Gonzalez, P.J.H. Franco, J.G. Carrillo, P.I.G. Chi and Q.M. Li, Mechanical Properties of Natural Fiber Reinforced Foamed Concrete, Materials, 2020, 13(14), p 3060. https://doi.org/10.3390/ma13143060CrossRef

15.

L.M. de Neuba, R.F.P. Junio, M.P. Ribeiro, A.T. Souza, E.S. de Lima, F.C.G. da Filho, A.B.S. da Figueiredo, F.O. de Braga, A.R.G. de Azevedo and S.N. Monteiro, Promising Mechanical, Thermal, and Ballistic Properties of Novel Epoxy Composites Reinforced with Cyperusmalaccensis Sedge Fiber, Polymers, 2020, 12(08), p 1776.CrossRef

16.

F.S. da Luz, F.C.G. da Filho, M.S. Oliveira, L.F.C. Nascimento and S.N. Monteiro, Composites with Natural Fibers and Conventional Materials Applied in a Hard Armor: A Comparison, Polymers, 2020, 12(09), p 1920.CrossRef

17.

L. Mohammed, M.N.M. Ansari, G. Pua, M. Jawaid and M.S. Islam, A Review on Natural Fiber Reinforced Polymer Composite and its Applications, Int. J. Polym. Sci., 2015. https://doi.org/10.1155/2015/243947CrossRef

18.

F.D.O. Braga, T.L. Milanezi, S.N. Monteiro, L.H.L. Louro, A.V. Gomes and É.P. Lima, Ballistic Comparison between Epoxy-Ramie and Epoxy-Aramid Composites in Multilayered Armor Systems, J. Market. Res., 2018, 7(4), p 541–549. https://doi.org/10.1016/j.jmrt.2018.06.018CrossRef

19.

F.D.C. Garcia Filho, M.S. Oliveira, A.C. Pereira, L.F.C. Nascimento, J. Ricardo Gomes Matheus and S.N. Monteiro, Ballistic Behaviour of Epoxy Matrix Composites Reinforced with piassava Fiber Against High Energy Ammunition, J. Mater. Res. Technol., 2020, 09(02), p 1734–1741.CrossRef

20.

S.N. Monteiro, A.C. Pereira, C.L. Ferreira, É.P. Júnior, R.P. Weber and F.S. de Assis, Performance of Plain Woven Jute Fabric-Reinforced Polyester Matrix Composite in Multilayered Ballistic System, Polymers, 2018, 10(03), p 230. https://doi.org/10.3390/polym10030230CrossRef

21.

M.S. Oliveira, F.C.G. da Filho, A.C. Pereira, L.F. Nunes, F.S. da Luz, F.O. de Braga, H.A. Colorado and S.N. Monteiro, Ballistic Performance and Statistical Evaluation of Multilayered armor with Epoxy-Fique Fabric Composites Using the Weibull Analysis, J. Mater. Res. Technol., 2019, 08(06), p 5899–5908.CrossRef

22.

S.N. Monteiro, É.P. Lima, L.H.L. Louro, L.C. da Silva and J.W. Drelich, Unlocking Function of Aramid Fibers in Multilayered Ballistic Armor, Metall. Mater. Trans. A, 2015, 46(01), p 37–40. https://doi.org/10.1007/s11661-014-2678-2CrossRef

23.

L.F.C. Nascimento, L.H.L. Louro, S.N. Monteiro, É.P. Lima and F.S. da Luz, Mallow Fiber-Reinforced Epoxy Composites in Multilayered Armor for Personal Ballistic Protection, JOM, 2017, 69(10), p 2052–2056. https://doi.org/10.1007/s11837-017-2495-3CrossRef

24.

A.K. Mohanty, M.A. Khan and G. Hinrichsen, Influence of Chemical Surface Modification on the Properties of Biodegradable Jute Fabrics-Polyester Amide Composites, Compos. A Appl. Sci. Manuf., 2000, 31(02), p 143–150. https://doi.org/10.1016/S1359-835X(99)00057-3CrossRef

25.

D. Ray, B.K. Sarkar, S. Das and A.K. Rana, Dynamic Mechanical and Thermal Analysis of Vinylester-Resin-Matrix Composites Reinforced with Untreated and Alkali-Treated Jute Fibres, Compos. Sci. Technol., 2002, 62(07), p 911–917. https://doi.org/10.1016/S0266-3538(02)00005-2CrossRef

26.

F.O. de Braga, L.T. Bolzan, F.S. da Luz, P.H.L.M. Lopes, É.P. Lima and S.N. Monteiro, High Energy Ballistic and Fracture Comparison between Multilayered Armor Systems Using Non-Woven Curaua Fabric Composites and Aramid laminates, J. Mater. Res. Technol., 2017, 6(4), p 417–422. https://doi.org/10.1016/j.jmrt.2017.08.001CrossRef

27.

N. Soykeabkaew, P. Supaphol and R. Rujiravanit, Preparation and Characterization of jute-and Flax-Reinforced Starch-Based Composite Foams, Carbohydrate Polym., 2004, 58(01), p 53–63. https://doi.org/10.1016/j.carbpol.2004.06.037CrossRef

28.

S. Mohanty, S.K. Verma and S.K. Nayak, Dynamic Mechanical and Thermal Properties of MAPE Treated Jute/HDPE Composites, Compos. Sci. Technol., 2006, 66(3), p 538–547. https://doi.org/10.1016/j.compscitech.2005.06.014CrossRef

29.

A.P. Kumar, R.P. Singh and B.D. Sarwade, Degradability of Composites, Prepared from Ethylene-Propylene Co-polymer and Jute Fiber Under Accelerated Aging and Biotic Environments, Mater. Chem. Phys., 2005, 92(2), p 458–469. https://doi.org/10.1016/j.matchemphys.2005.01.027CrossRef

30.

F.O. de Braga, L.T. Bolzan, É.P. Lima and S.N. Monteiro, Performance of Natural Curaua Fiber-Reinforced Polyester Composites under 7.62 mm Bullet Impact as a Stand-Alone Ballistic Armor, J. Mater. Res. Technol., 2017, 6(4), p 323–328. https://doi.org/10.1016/j.jmrt.2017.08.003CrossRef

31.

M.S. Oliveira, F.S. da Luz, A.T. Souza, L.C.C. da Demosthenes, A.C. Pereira, F.C.G. da Filho, F.O. de Braga, A.B.S. da Figueiredo and S.N. Monteiro, Tucum Fiber from Amazon astrocaryum vulgare Palm Tree: Novel Reinforcement for Polymer Composites, Polymers, 2020, 12(10), p 2259. https://doi.org/10.3390/polym12102259CrossRef

32.

P. Wambua, B. Vangrimde, S. Lomov and I. Verpoest, The Response of Natural Fibre Composites to Ballistic Impact by Fragment Simulating Projectiles, Compos. Struct., 2007, 77(2), p 232–240. https://doi.org/10.1016/j.compstruct.2005.07.006CrossRef

33.

S. Rajole, K.S. Ravishankar and S.M. Kulkarni, Performance Study of Jute-Epoxy Composites/sandwiches under Normal Ballistic Impact, Defence Technol., 2020, 16(04), p 947–955. https://doi.org/10.1016/j.dt.2019.11.011CrossRef

34.

S. Kumar, K. Akella, M. Joshi, A. Tewari and N.K. Naik, Performance of Ceramic-Composite Armor under Ballistic Impact Loading, J. Mater. Eng. Perform., 2020, 29(09), p 5625–5637. https://doi.org/10.1007/s11665-020-05041-zCrossRef

35.

M. Fejdyś, K. Kośla, A.K. Jastrząbek and M. Łandwijt, Influence of Ceramic Properties on the Ballistic Performance of the Hybrid Ceramic–Multi-Layered UHMWPE Composite Armour, J. Aust. Ceram. Soc., 2020, 57(1), p 149–161. https://doi.org/10.1007/s41779-020-00516-7CrossRef

36.

D.Q. Hu, J.R. Wang, L.K. Yin, Z.G. Chen, R.C. Yi and C.H. Lu, Experimental Study on the Penetration Effect of Ceramics Composite Projectile on Ceramic/A3 Steel Compound Targets, Defence Technol., 2017, 13(04), p 281–287. https://doi.org/10.1016/j.dt.2017.05.011CrossRef

37.

S.N. Monteiro, L.H.L. Louro, W. Trindade, C.N. Elias, C.L. Ferreira, E.S. da Lima, R.P. Weber, J.C.M. Suarez, A.B.S. da Figueiredo, W.A. Pinheiro, L.C. da Silva and E.P. Lima Jr., Natural curaua fiber-reinforced composites in multilayered ballistic armor, Metal. Mater. Trans. A: Phys. Metal. Mater. Sci., 2015, 46(10), p 4567–4577. https://doi.org/10.1007/s11661-015-3032-zCrossRef

38.

S.N. Monteiro, F.P.D. Lopes, A.P. Barbosa, A.B. Bevitori, I.L.A. da Silva and L.L. da Costa, Natural Lignocellulosic Fibers as Engineering Materials-An Overview, Metall. Mater. Trans. A, 2011, 42(10), p 2963. https://doi.org/10.1007/s11661-011-0789-6CrossRef

39.

L.F.C. Nascimento, L.H.L. Louro, S.N. Monteiro, A.V. Gomes, R.L.S.B. Marçal, É.P. Lima and J.I. Margem, Ballistic performance of mallow and jute natural fabrics reinforced epoxy composites in multilayered armor, Mater. Res., 2017, 20, p 399–403. https://doi.org/10.1590/1980-5373-mr-2016-0927CrossRef

40.

M. Cheng, W. Chen and T. Weerasooriya, Mechanical Properties of Kevlar® KM2 Single FIBER, J. Eng. Mater. Technol., Trans. ASME, 2005, 127(02), p 197–203. https://doi.org/10.1115/1.1857937CrossRef

41.

M.B. Mukasey, J.L. Sedgwick and D.W. Hagy, “Ballistic resistance of body armor,”0101.06, National Institute of Justice, U.S. Department of Justice, 2008, 39

42.

“Textiles Bullet Resistant Jackets Performance Requirements”, IS 17051:2018, Indian Standard, Bureau of Indian Standards, 2018, 19

43.

T. Demir, M. Übeyli and R.O. Yildirum, Effect of Hardness on the Ballistic Impact Behavior of High-Strength Steels Against 7.62-mm Armor Piercing Projectiles, J. Mater. Eng. Perform., 2009, 18(02), p 145–153. https://doi.org/10.1007/s11665-008-9288-3CrossRef

44.

K. Akella and N.K. Naik, Composite Armour-A Review, J. Indian Inst. Sci., 2015, 95(03), p 297–312.

45.

F.S. da Luz, S.N. Monteiro, E.S. Lima and É.P. Lima, Ballistic Application of Coir Fiber Reinforced Epoxy Composite in Multilayered Armor, Mater. Res., 2017, 20(Suppl 2), p 23–28. https://doi.org/10.1590/1980-5373-MR-2016-0951CrossRef

Titel: Ballistic Efficiency of Multilayered Armor System Reinforced with Jute-Kevlar Epoxy Composite against High-Energy Steel Core Projectile
verfasst von: Saurabh Kumar
Asif Malek
Rajesh Babu
Shikhar Mathur
Publikationsdatum: 27.07.2021
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 11/2021
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-06057-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2021

Microstructure and Mechanical Behavior of ARMCO Fe Severely Plastically Deformed by Combination of Constrained Groove Pressing and Cold Rolling

Enhanced Impact Toughness of Previously Cold Rolled High-Carbon Chromium Bearing Steel with Rare Earth Addition

Characterization of the Microstructures and Dynamic Recrystallization Behavior of Ti-6Al-4V Titanium Alloy through Experiments and Simulations

Effects of Non-isothermal Aging on Microstructure and Mechanical Properties of WE43 Alloy

Simulation Led Performance Evaluation and Design of Polymer Composite for Encapsulation of Low-Concentration Photovoltaic Modules

Effect of Mo Content on the Thermal Conductivity and Corrosion Resistance of Die Steel

Premium Partner

Marktübersichten