nach oben

Erschienen in:

26.01.2023 | ORIGINAL PAPER

Bio-composites based on cellulosic fibers from agro-industrial waste filled PP matrix: production and properties

verfasst von: Abdelghani Boussetta, Hassan Charii, Anass Ait Benhamou, El-Houssaine Ablouh, Francisco J. Barba, Nabil Grimi, Mario J. Simirgiotis, Amine Moubarik

Erschienen in: Polymer Bulletin | Ausgabe 12/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The aim of this work is the valorisation of bagasse cane by-product for the development of a new bio-composite based on Polypropylene (PP) reinforced with different cellulose derivatives. In this study, the effect of fiber’s chemical surface treatments on the thermal and mechanical performance of PP was investigated, in particular, a comparison between three chemical treatments (alkali, bleaching, and coupling agent). Bio-composite materials were prepared using twin-screw extrusion followed by injection molding by mixing PP pellet with 5 to 10 Wt.% of raw bagasse cane (RBC), alkali bagasse cane (ABC) and cellulose microfibers (CMF), as well as CMF with Styrene-(ethylene-butene)-styrene three-block co-polymer grafted with maleic anhydride (SEBS-g-MA) as coupling agent. Overall, the thermal analysis reveals that the addition of fibers reduces the thermal stability of the reinforced PP. The mechanical results show an improvement in the values of Yung’s modulus, tensile strength and hardness of the reinforced PP compared to neat PP. However, a remarkable decrease was obtained in elongation at break and toughness for all reinforced composites compared to neat PP. These findings clearly show the advantages in the use of thermoplastic matrix reinforced with cellulosic fibers.

Vorheriger Artikel Cloisite- and bentonite-based stable nanocomposite membranes for enhancement of direct methanol fuel cell applications

Nächster Artikel Experimental investigation of absorption shielding efficiency of rubber composites

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Mangalgiri PD (1999) Composite materials for aerospace applications. Bull Mater Sci. https://doi.org/10.1007/BF02749982CrossRef

Cole GS, Sherman AM (1995) Light weight materials for automotive applications. Mater Charact. https://doi.org/10.1016/1044-5803(95)00063-1CrossRef

Kokkinis D, Schaffner M, Studart AR (2015) Multimaterial magnetically assisted 3D printing of composite materials. Nat Commun. https://doi.org/10.1038/ncomms9643CrossRefPubMed

Ramakrishna S, Mayer J, Wintermantel E, Leong KW (2001) Biomedical applications of polymer-composite materials: a review. Compos Sci Technol. https://doi.org/10.1016/S0266-3538(00)00241-4CrossRef

Moubarik A, Grimi N, Boussetta N (2013) Structural and thermal characterization of Moroccan sugar cane bagasse cellulose fibers and their applications as a reinforcing agent in low density polyethylene. Compos Part B Eng 52:233–238. https://doi.org/10.1016/j.compositesb.2013.04.040CrossRef

Aymes-Chodur C, Betz N, Legendre B, Yagoubi N (2006) Structural and physico-chemical studies on modification of polypropylene and its polyphenolic antioxidant by electron beam irradiation. Polym Degrad Stab. https://doi.org/10.1016/j.polymdegradstab.2005.05.013CrossRef

John MJ, Anandjiwala RD (2008) Recent developments in chemical modification and characterization of natural fiber-reinforced composites. Polym Compos. https://doi.org/10.1002/pc.20461CrossRef

Mennani M, Kasbaji M, Ait A, Boussetta A (2023) International journal of biological macromolecules effects of direct sulfonation on the catalytic activity and recyclability of novel lignin-based solid acid catalysts from agri-food waste. Int J Biol Macromol 230:123242. https://doi.org/10.1016/j.ijbiomac.2023.123242CrossRefPubMed

Ait Benhamou A, Kassab Z, Nadifiyine M, Salim MH, Sehaqui H, Moubarik A et al (2021) Extraction, characterization and chemical functionalization of phosphorylated cellulose derivatives from giant reed plant. Cellulose 28:4625–4642. https://doi.org/10.1007/s10570-021-03842-6CrossRef

10.

Ramesh M, Palanikumar K, Reddy KH (2017) Plant fibre based bio-composites: sustainable and renewable green materials. Renew Sustain Energy Rev 79:558–584. https://doi.org/10.1016/J.RSER.2017.05.094CrossRef

11.

Zwawi M (2021) A review on natural fiber bio-composites, surface modifications and applications. Molecules 26:404. https://doi.org/10.3390/MOLECULES26020404CrossRefPubMedPubMedCentral

12.

Oulkhir A, Lyamlouli K, Danouche M, Ouazzani J, Benhida R (2022) A critical review on natural surfactants and their potential for sustainable mineral flotation. Rev Environ Sci Biotechnol. https://doi.org/10.1007/s11157-022-09639-8CrossRef

13.

Danouche M, El Arroussi H, El Ghachtouli N (2022) Bioremoval of acid red 14 dye by Wickerhamomyces anomalus biomass: kinetic and thermodynamic study, characterization of physicochemical interactions, and statistical optimization of the biosorption process. Biomass Convers Biorefinery. https://doi.org/10.1007/s13399-022-02711-xCrossRef

14.

Danouche M, El Ghachtouli N, Aasfar A, Bennis I, El Arroussi H (2022) Pb(II)-phycoremediation mechanism using Scenedesmus obliquus: cells physicochemical properties and metabolomic profiling. Heliyon 8:e08967. https://doi.org/10.1016/j.heliyon.2022.e08967CrossRefPubMedPubMedCentral

15.

Ait Benhamou A, Boussetta A, Nadifiyine M, Moubarik A (2021) Effect of alkali treatment and coupling agent on thermal and mechanical properties of Opuntia Ficus-Indica cladodes fibers reinforced HDPE composites. Polym Bull. https://doi.org/10.1007/s00289-021-03619-8CrossRef

16.

Le Moigne N, Otazaghine B, Corn S, Angellier-Coussy H, Bergeret A (2018) Modification of the interface/interphase in natural fibre reinforced composites: treatments and processes. Surf Interfaces Nat Fibre Reinf Compos: Fundam Modif Charact. https://doi.org/10.1007/978-3-319-71410-3_3CrossRef

17.

Kassab Z, Abdellaoui Y, Salim MH, Bouhfid R, El A, Qaiss K et al (2020) Micro-and nano-celluloses derived from hemp stalks and their effect as polymer reinforcing materials. Carbohydr Polym 245:116506. https://doi.org/10.1016/j.carbpol.2020.116506CrossRefPubMed

18.

Kassab Z, Mansouri S, Tamraoui Y, Sehaqui H, Hannache H, Qaiss AEK et al (2020) Identifying Juncus plant as viable source for the production of micro-and nano-cellulose fibers: application for PVA composite materials development. Ind Crops Prod 144:112035. https://doi.org/10.1016/j.indcrop.2019.112035CrossRef

19.

Arrakhiz FZ, El AM, Benmoussa K, Bouhfid R, Essassi EM, Qaiss A (2012) Evaluation of mechanical and thermal properties of Pine cone fibers reinforced compatibilized polypropylene. Mater Des 40:528–535. https://doi.org/10.1016/j.matdes.2012.04.032CrossRef

20.

Rumánková L, Smutka L (2013) Global sugar market-the analysis of factors influencing supply and demand. LXI 61(2):463–471. https://doi.org/10.11118/actaun201361020463CrossRef

21.

Sahu O (2018) Assessment of sugarcane industry: suitability for production, consumption, and utilization. Ann Agrar Sci. https://doi.org/10.1016/j.aasci.2018.08.001CrossRef

22.

Robak K, Balcerek M (2018) Review of second generation bioethanol production from residual biomass. Food Technol Biotechnol 56(2):174. https://doi.org/10.17113/ftb.56.02.18.5428CrossRefPubMedPubMedCentral

23.

Rabelo SC, Carrere H, Maciel Filho R, Costa AC (2011) Production of bioethanol, methane and heat from sugarcane bagasse in a biorefinery concept. Bioresour Technol. https://doi.org/10.1016/j.biortech.2011.05.081CrossRefPubMed

24.

Dias MOS, Cunha MP, Jesus CDF, Rocha GJM, Pradella JGC, Rossell CEV et al (2011) Second generation ethanol in Brazil: can it compete with electricity production? Bioresour Technol. https://doi.org/10.1016/j.biortech.2011.06.098CrossRefPubMed

25.

Tahir H, Sultan M, Akhtar N, Hameed U, Abid T (2016) Application of natural and modified sugar cane bagasse for the removal of dye from aqueous solution. J Saudi Chem Soc. https://doi.org/10.1016/j.jscs.2012.09.007CrossRef

26.

Ghaderi M, Mousavi M, Yousefi H, Labbafi M (2014) All-cellulose nanocomposite film made from bagasse cellulose nanofibers for food packaging application. Carbohydr Polym. https://doi.org/10.1016/j.carbpol.2014.01.013CrossRefPubMed

27.

Moubarik A, Grimi N, Boussetta N, Pizzi A (2013) Isolation and characterization of lignin from Moroccan sugar cane bagasse: production of lignin-phenol-formaldehyde wood adhesive. Ind Crops Prod 45:296–302. https://doi.org/10.1016/j.indcrop.2012.12.040CrossRef

28.

Balaji A, Karthikeyan B, Sundar Raj C (2015) Bagasse fiber–the future biocomposite material: a review. Int J ChemTech Res 7(1):223–233

29.

Boussetta A, Ait Benhamou A, Barba FJ, EL Idrissi M, Grimi N, Moubarik A (2021) Experimental and theoretical investigations of lignin-urea-formaldehyde wood adhesive : density functional theory analysis. Int J Adhes Adhes 104:102737. https://doi.org/10.1016/j.ijadhadh.2020.102737CrossRef

30.

Luz SM, Gonçalves AR, Del’Arco AP (2007) Mechanical behavior and microstructural analysis of sugarcane bagasse fibers reinforced polypropylene composites. Compos Part A Appl Sci Manuf. https://doi.org/10.1016/j.compositesa.2007.01.014CrossRef

31.

Jiménez AM, Espinach FX, Granda LA, Delgado-Aguilar M, Quintana G, Fullana-i-Palmer P et al (2016) Tensile strength assessment of injection-molded high yield sugarcane bagasse-reinforced polypropylene. BioResources 11:6346–6361. https://doi.org/10.15376/biores.11.3.6346-6361CrossRef

32.

Ilangovan M, Guna V, Keshavanarayana G, Reddy N (2018) Tensile and flexural properties of polypropylene composites reinforced with raw bagasse. Sugar Tech 20:454–463. https://doi.org/10.1007/s12355-017-0560-4CrossRef

33.

Luz SM, Del Tio J, Rocha GJM, Gonçalves AR, Del’Arco AP (2008) Cellulose and cellulignin from sugarcane bagasse reinforced polypropylene composites: effect of acetylation on mechanical and thermal properties. Compos Part A Appl Sci Manuf 39:1362–1369. https://doi.org/10.1016/j.compositesa.2008.04.014CrossRef

34.

Ninomiya K, Abe M, Tsukegi T, Kuroda K, Tsuge Y, Ogino C et al (2018) Lignocellulose nanofibers prepared by ionic liquid pretreatment and subsequent mechanical nanofibrillation of bagasse powder: application to esterified bagasse/polypropylene composites. Carbohydr Polym 182:8–14. https://doi.org/10.1016/j.carbpol.2017.11.003CrossRefPubMed

35.

Oladele IO, Ibrahim IO, Akinwekomi AD, Talabi SI (2019) Effect of mercerization on the mechanical and thermal response of hybrid bagasse fiber/CaCO 3 reinforced polypropylene composites. Polym Test 76:192–198. https://doi.org/10.1016/j.polymertesting.2019.03.021CrossRef

36.

Ait Benhamou A, Boussetta A, Grimi N, EL Idrissi M, Nadifiyine M, Barba FJ et al (2021) Characteristics of cellulose fibers from Opuntia ficus indica cladodes and its use as reinforcement for PET based composites. J Nat Fibers. https://doi.org/10.1080/15440478.2021.1904484CrossRef

37.

Ait Benhamou A, Boussetta A, Kassab Z, Nadifiyine M (2022) Elaboration of carboxylated cellulose nanocrystals filled starch-based adhesives for the manufacturing of eco-friendly particleboards. Constr Build Mater 348:128683. https://doi.org/10.1016/j.conbuildmat.2022.128683CrossRef

38.

Salim MH, Abdellaoui Y, Ait Benhamou A, Ablouh EH, El Achaby M, Kassab Z (2022) Influence of cellulose nanocrystals from pea pod waste on mechanical, thermal, biodegradability, and barrier properties of chitosan-based films. Cellulose 29:5117–5135. https://doi.org/10.1007/s10570-022-04587-6CrossRef

39.

Boukind S, Bouaouina J, Bouras H, Benhamou AA, Ablouh EH, Kassab Z et al (2022) Powerful cellulose phosphorylation by fertilizer-grade phosphate enables excellent methylene blue paper sorbent. Int J Biol Macromol 219:949–963. https://doi.org/10.1016/j.ijbiomac.2022.08.009CrossRefPubMed

40.

Arrakhiz FZ, Malha M, Bouhfid R, Benmoussa K, Qaiss A (2013) Tensile, flexural and torsional properties of chemically treated alfa, coir and bagasse reinforced polypropylene. Compos Part B 47:35–41. https://doi.org/10.1016/j.compositesb.2012.10.046CrossRef

41.

Kerche EF, Neves RM, Ornaghi HL, Zattera AJ, Schrekker HS (2022) The influence of ionic liquid concentration on microcrystalline cellulose modification. Carbohydr Polym Technol Appl 3:0–9. https://doi.org/10.1016/j.carpta.2022.100211CrossRef

42.

Segal L, Creely JJ, Martin AE, Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J. https://doi.org/10.1177/004051755902901003CrossRef

43.

International Organization for Standardization (2012) ISO 527–1:2012-Plastics--determination of tensile properties--Part 1: general principles. Geneva

44.

Laaziz SA, Raji M, Hilali E, Essabir H, Rodrigue D, Bouhfid R et al (2017) Bio-composites based on polylactic acid and argan nut shell: production and properties. Int J Biol Macromol 104:30–42. https://doi.org/10.1016/j.ijbiomac.2017.05.184CrossRefPubMed

45.

Kerche EF, da Silva VD, da Silveira JG, Schrekker HS, de Avila DR, Irulappasamy S et al (2021) Aramid pulp treated with imidazolium ionic liquids as a filler in rigid polyurethane bio-foams. J Appl Polym Sci 138:1–9. https://doi.org/10.1002/app.50492CrossRef

46.

Ait Benhamou A, Boussetta A, Kassab Z, Nadifiyine M, Sehaqui H, El Achaby M et al (2022) Application of UF adhesives containing unmodified and phosphate-modified cellulose microfibers in the manufacturing of particleboard composites. Ind Crops Prod 176:114318. https://doi.org/10.1016/j.indcrop.2021.114318CrossRef

47.

Hernández-Varela JD, Chanona-Pérez JJ, Calderón Benavides HA, Cervantes Sodi F, Vicente-Flores M (2021) Effect of ball milling on cellulose nanoparticles structure obtained from garlic and agave waste. Carbohydr Polym. https://doi.org/10.1016/j.carbpol.2020.117347CrossRefPubMed

48.

Kassab Z, Boujemaoui A, Ben Youcef H, Hajlane A, Hannache H, El Achaby M (2019) Production of cellulose nanofibrils from alfa fibers and its nanoreinforcement potential in polymer nanocomposites. Cellulose 26:9567–9581. https://doi.org/10.1007/s10570-019-02767-5CrossRef

49.

French AD, Santiago CM (2013) Cellulose polymorphy, crystallite size, and the segal crystallinity index. Cellulose. https://doi.org/10.1007/s10570-012-9833-yCrossRef

50.

Mennani M, Ait A, Kasbaji M, Boussetta A, Moubarik A (2022) Insights on the physico-chemical properties of alkali lignins from different agro-industrial residues and their use in phenol-formaldehyde wood adhesive formulation. Int J Biol Macromol 221:149–162. https://doi.org/10.1016/j.ijbiomac.2022.08.191CrossRefPubMed

51.

El Achaby M, Ruesgas-Ramón M, Fayoud NEH, Figueroa-Espinoza MC, Trabadelo V, Draoui K et al (2019) Bio-sourced porous cellulose microfibrils from coffee pulp for wastewater treatment. Cellulose 26:3873–3889. https://doi.org/10.1007/s10570-019-02344-wCrossRef

52.

Kassab Z, Ben youcef H, Hannache H, El Achaby M (2019) Isolation of cellulose nanocrystals from various lignocellulosic materials: physico-chemical characterization and application in polymer composites development. Mater Today Proc 13:964–973. https://doi.org/10.1016/j.matpr.2019.04.061CrossRef

53.

El Miri N, Abdelouahdi K, Barakat A, Zahouily M, Fihri A, Solhy A et al (2015) Bio-nanocomposite films reinforced with cellulose nanocrystals: rheology of film-forming solutions, transparency, water vapor barrier and tensile properties of film. Carbohydr Polym 129:156–167. https://doi.org/10.1016/j.carbpol.2015.04.051CrossRefPubMed

54.

El Achaby M, Kassab Z, Aboulkas A, Gaillard C, Barakat A (2018) Reuse of red algae waste for the production of cellulose nanocrystals and its application in polymer nanocomposites. Int J Biol Macromol 106:681–691. https://doi.org/10.1016/j.ijbiomac.2017.08.067CrossRefPubMed

55.

Tarchoun AF, Trache D, Klapötke TM (2019) Microcrystalline cellulose from Posidonia oceanica brown algae : extraction and characterization. Int J Biol Macromol 138:837–845. https://doi.org/10.1016/j.ijbiomac.2019.07.176CrossRefPubMed

56.

Fortunati E, Puglia D, Luzi F, Santulli C, Kenny JM, Torre L (2013) Binary PVA bio-nanocomposites containing cellulose nanocrystals extracted from different natural sources: part I. Carbohydr Polym. https://doi.org/10.1016/j.carbpol.2013.03.075CrossRefPubMed

57.

Zhao Y, Moser C, Lindström ME, Henriksson G, Li J (2017) Cellulose nanofibers from softwood, hardwood, and tunicate: preparation-structure-film performance interrelation. ACS Appl Mater Interfaces. https://doi.org/10.1021/acsami.7b01738CrossRefPubMedPubMedCentral

58.

Kallel F, Bettaieb F, Khiari R, García A, Bras J, Chaabouni SE (2016) Isolation and structural characterization of cellulose nanocrystals extracted from garlic straw residues. Ind Crops Prod. https://doi.org/10.1016/j.indcrop.2016.04.060CrossRef

59.

AL-Oqla FM, Hayajneh MT, Fares O (2019) Investigating the mechanical thermal and polymer interfacial characteristics of Jordanian lignocellulosic fibers to demonstrate their capabilities for sustainable green materials. J Clean Prod. https://doi.org/10.1016/j.jclepro.2019.118256CrossRef

60.

Yue Y, Han J, Han G, Aita GM, Wu Q (2015) Cellulose fibers isolated from energycane bagasse using alkaline and sodium chlorite treatments: structural, chemical and thermal properties. Ind Crops Prod 76:355–363. https://doi.org/10.1016/j.indcrop.2015.07.006CrossRef

61.

Liu Y, Hu H (2008) X-ray diffraction study of bamboo fibers treated with NaOH. Fibers Polym 9:735–739. https://doi.org/10.1007/s12221-008-0115-0CrossRef

62.

Trache D (2018) Nanocellulose as a promising sustainable material for biomedical applications. AIMS Mater Sci 5(2):201–205. https://doi.org/10.3934/matersci.2018.2.201CrossRef

63.

Kim HS, Kim S, Kim HJ, Yang HS (2006) Thermal properties of bio-flour-filled polyolefin composites with different compatibilizing agent type and content. Thermochim Acta. https://doi.org/10.1016/j.tca.2006.09.013CrossRef

64.

Gañán P, Mondragon I (2003) Thermal and degradation behavior of fique fiber reinforced thermoplastic matrix composites. J Therm Anal Calorim. https://doi.org/10.1023/A:1025830430267CrossRef

65.

Ray D, Sarkar BK, Basak RK, Rana AK (2004) Thermal behavior of vinyl ester resin matrix composites reinforced with alkali-treated jute fibers. J Appl Polym Sci. https://doi.org/10.1002/app.20754CrossRef

66.

Correa-Aguirre JP, Luna-Vera F, Caicedo C, Vera-Mondragón B, Hidalgo-Salazar MA (2020) The effects of reprocessing and fiber treatments on the properties of polypropylene-sugarcane bagasse biocomposites. Polymers. https://doi.org/10.3390/polym12071440CrossRefPubMedPubMedCentral

67.

Arrakhiz FZ, Benmoussa K, Bouhfid R, Qaiss A (2013) Pine cone fiber / clay hybrid composite: mechanical and thermal properties. Mater Des 50:376–381. https://doi.org/10.1016/j.matdes.2013.03.033CrossRef

68.

Seki Y (2009) Innovative multifunctional siloxane treatment of jute fiber surface and its effect on the mechanical properties of jute/thermoset composites. Mater Sci Eng A. https://doi.org/10.1016/j.msea.2009.01.043CrossRef

69.

Stocchi A, Lauke B, Vázquez A, Bernal C (2007) A novel fiber treatment applied to woven jute fabric/vinylester laminates. Compos Part A Appl Sci Manuf. https://doi.org/10.1016/j.compositesa.2006.10.010CrossRef

70.

Morán JI, Alvarez VA, Cyras VP, Vázquez A (2008) Extraction of cellulose and preparation of nanocellulose from sisal fibers. Cellulose. https://doi.org/10.1007/s10570-007-9145-9CrossRef

71.

Saba N, Tahir PM, Jawaid M (2014) A review on potentiality of nano filler/natural fiber filled polymer hybrid composites. Polymers. https://doi.org/10.3390/polym6082247CrossRef

72.

Mulinari DR, Voorwald HJC, Cioffi MOH, da Silva MLCP, Luz SM (2009) Preparation and properties of HDPE/sugarcane bagasse cellulose composites obtained for thermokinetic mixer. Carbohydr Polym 75:317–321. https://doi.org/10.1016/j.carbpol.2008.07.028CrossRef

73.

Corradini E, Ito EN, Marconcini JM, Rios CT, Agnelli JAM, Mattoso LHC (2009) Interfacial behavior of composites of recycled poly(ethyelene terephthalate) and sugarcane bagasse fiber. Polym Test. https://doi.org/10.1016/j.polymertesting.2008.11.014CrossRef

74.

El-Fattah AA, El Demerdash AGM, Alim Sadik WA, Bedir A (2015) The effect of sugarcane bagasse fiber on the properties of recycled high density polyethylene. J Compos Mater. https://doi.org/10.1177/0021998314561484CrossRef

75.

Mulinari DR, Voorwald HJC, Cioffi MOH, da Silva MLCP, da Cruz TG, Saron C (2009) Sugarcane bagasse cellulose/HDPE composites obtained by extrusion. Compos Sci Technol 69:214–219. https://doi.org/10.1016/j.compscitech.2008.10.006CrossRef

76.

Essabir H, Bensalah MO, Rodrigue D, Bouhfid R, el Qaisskacem A (2017) A comparison between bio- and mineral calcium carbonate on the properties of polypropylene composites. Constr Build Mater 134:549–555. https://doi.org/10.1016/j.conbuildmat.2016.12.199CrossRef

77.

Spagnol C, Fragal EH, Witt MA, Follmann HDM, Silva R, Rubira AF (2018) Mechanically improved polyvinyl alcohol-composite films using modified cellulose nanowhiskers as nano-reinforcement. Carbohydr Polym 191:25–34. https://doi.org/10.1016/j.carbpol.2018.03.001CrossRefPubMed

78.

Amiandamhen SO, Meincken M, Tyhoda L (2020) Natural Fibre Modification and Its Influence on Fibre-matrix Interfacial Properties in Biocomposite Materials. Fibers Polym 21:677–689. https://doi.org/10.1007/s12221-020-9362-5CrossRef

79.

Koffi A, Koffi D, Toubal L (2021) Mechanical properties and drop-weight impact performance of injection-molded HDPE/birch fiber composites. Polym Test 93:106956. https://doi.org/10.1016/j.polymertesting.2020.106956CrossRef

Titel: Bio-composites based on cellulosic fibers from agro-industrial waste filled PP matrix: production and properties
verfasst von: Abdelghani Boussetta
Hassan Charii
Anass Ait Benhamou
El-Houssaine Ablouh
Francisco J. Barba
Nabil Grimi
Mario J. Simirgiotis
Amine Moubarik
Publikationsdatum: 26.01.2023
Verlag: Springer Berlin Heidelberg
Erschienen in: Polymer Bulletin / Ausgabe 12/2023
Print ISSN: 0170-0839
Elektronische ISSN: 1436-2449
DOI: https://doi.org/10.1007/s00289-023-04698-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2023

Synthesis and study of the structure of N-succinyl chitosan Bombyx mori and their biological applications

Novel shear thickening fluids possessing high shear rates using monodispersed silica nanoparticles and PEG

Investigation of the structure and tensile strength of ultrahigh molecular weight polyethylene and amide functionalized single-walled carbon nanotubes nanocomposites

Boron nitride nanosheets dispersed biopolymer solution as an effective copper corrosion inhibitor in acidic medium

An all-biomass adsorbent: competitive removal and correlative mechanism of Cu2+, Pb2+, Cd2+ from multi-element aqueous solutions

The importance of polyurethane/carbon nanotubes composites fabrication method to mimic mechanical behavior of different types of soft tissues

Premium Partner

Marktübersichten