nach oben

Journal of Materials Engineering and Performance

Erschienen in:

20.05.2022 | Technical Article

Cavitation Erosion Behavior of Nb Strengthened Duplex Stainless Steel Surfacing Layer

verfasst von: Yefeng Bao, Chong Cao, Bingqi Xie, Zirui Wang, Linpo Guo, Ke Yang, Qining Song

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 12/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, the Nb-containing duplex stainless steel (DSS) was prepared using the tungsten inert-gas welding powder surfacing method, and the solution treatment was carried out at different temperatures. A scanning electron microscope with an energy-dispersive spectrometer, universal testing machine, and ultrasonic cavitation equipment were used to study the structure, mechanical properties, and cavitation erosion (CE) resistance of DSS. The results showed that, compared with the as-welded 2209 DSS, Nb-containing DSS has better strength and lower plasticity. After heat treatment, the strength and plasticity of Nb-containing DSS were also reduced. During the ultrasonic CE test, the cumulative weight losses of the Nb-containing DSSs for 6 h were less than that of the control group (2209 DSS). However, solution treatment caused the Z phase to appear in the Nb-containing DSSs. Z phase reduced the mechanical properties of the matrix, promoted the initiation of CE cracks, and increased the cavitation weight loss of the sample after heat treatment.

Vorheriger Artikel Effect of Grain Size on the Mechanical Properties and Formability of AA8021 Aluminum Foil

Nächster Artikel Effect of the Coke/Flake Graphite Ratio on the Microstructure and Properties of Cu-Based Powder Metallurgy Friction Materials

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

L.A. Espitia and A. Toro, Cavitation Resistance, Microstructure and Surface Topography of Materials Used for Hydraulic Components [J], Tribol. Int., 2010, 43, p 2037–2045. https://doi.org/10.1016/j.triboint.2010.05.009CrossRef

Q.N. Song, Y. Tong, N. Xu, S.Y. Sun, H.L. Li, Y.F. Bao, Y.F. Jiang, Z.B. Wang and Y.X. Qiao, Synergistic Effect between Cavitation Erosion and Corrosion for Various Copper Alloys in Sulphide-Containing 3.5% NaCl Solutions, Wear, 2020, 450–451, p 203258. https://doi.org/10.1016/j.wear.2020.203258CrossRef

H.J. Amarendra, G.P. Chaudhari and S.K. Nath, Synergy of Cavitation and Slurry Erosion in the Slurry Pot Tester, Wear, 2012, 290–291, p 25–31. https://doi.org/10.1016/j.wear.2012.05.025CrossRef

K. Su, J. Wu and D. Xia, Dual Role of microparticles in Synergistic Cavitation–Particle Erosion: Modeling and experiments, Wear, 2021, 470–471, p 203633. https://doi.org/10.1016/j.wear.2021.203633CrossRef

T.B. Benjamin and A.T. Ellis, The Collapse of Cavitation Bubbles and the Pressures thereby Produced against Solid Boundaries. Philosophical transactions of the Royal Society of London, Ser. A: Math. Phys. Sci., 1966, 260, p 221–240. https://doi.org/10.1098/rsta.1966.0046CrossRef

Q.N. Song, Y. Tong, H.L. Li, H.N. Zhang, N. Xu, G.Y. Zhang, Y.F. Bao, W. Liu, Z.G. Liu and Y.X. Qiao, Corrosion and Cavitation Erosion Resistance Enhancement of Cast Ni-Al Bronze by Laser Surface Melting, J. Iron. Steel Res. Int., 2022, 29, p 359–369. https://doi.org/10.1007/s42243-021-00674-3CrossRef

Z. Li, J. Han, J. Lu and J. Chen, Cavitation Erosion Behavior of Hastelloy C-276 Nickel-Based Alloy, J. Alloy. Compd., 2015, 619, p 754–759. https://doi.org/10.1016/j.jallcom.2014.08.248CrossRef

A. Fattah and M.A. Sidkey, Cavitational Damage of Titanium in Molten Lead, Bull. Mater. Sci., 1983, 5, p 179–184. https://doi.org/10.1007/BF02744032CrossRef

C.G. Stephanis, J.G. Hatiris and D.E. Mourmouras, The Process (Mechanism) of Erosion of Soluble Brittle Materials Caused by Cavitation, Ultrason. Sonochem., 1997, 4, p 269–271. https://doi.org/10.1016/S1350-4177(96)00040-5CrossRef

10.

W.J. Tomlinson and M.G. Talks, Erosion and Corrosion of Cast Iron under Cavitation Conditions, Tribol. Int., 1991, 24, p 67–75. https://doi.org/10.1016/0301-679X(91)90035-8CrossRef

11.

K. Chiu, F. Cheng and H. Man, Evolution of Surface Roughness of some Metallic Materials in Cavitation Erosion, Ultrasonics, 2005, 43, p 713–716. https://doi.org/10.1016/j.ultras.2005.03.009CrossRef

12.

X. Long, H. Yao and J. Zhao, Investigation on Mechanism of Critical Cavitating Flow in Liquid Jet Pumps under Operating Limits, Int. J. Heat Mass Transf., 2009, 52, p 2415–2420. https://doi.org/10.1016/j.ijheatmasstransfer.2008.11.018CrossRef

13.

P.V. Marques and R. Trevisan, An SEM-Based Method for the Evaluation of the Cavitation Erosion Behavior of Materials, Mater. Charact., 1998, 41, p 193–200. https://doi.org/10.1016/S1044-5803(98)00038-2CrossRef

14.

C. Meena and V. Uthaisangsuk, Micromechanics Based Modeling of Effect of Sigma Phase on Mechanical and Failure Behavior of Duplex Stainless Steel, Metall. and Mater. Trans. A., 2021, 52, p 1–21. https://doi.org/10.1007/s11661-021-06163-2CrossRef

15.

A. Bjy and B. Ysa, Effect of Mo Addition on Aging Behavior of TRIP-Aided Duplex Stainless Steel, Mater. Charact., 2021 https://doi.org/10.1016/j.matchar.2021.110946CrossRef

16.

T. Wan, N. Xiao, H. Shen and X. Yong, The Effect of Chloride Ions on the Corroded Surface Layer of 00Cr22Ni5Mo3N Duplex Stainless Steel under Cavitation, Ultraso. Sonochem., 2016, 33, p 1–9. https://doi.org/10.1016/j.ultsonch.2016.04.019CrossRef

17.

K. Selvam, P. Mandal, H.S. Grewal and H.S. Arora, Ultrasonic Cavitation Erosion-Corrosion Behavior of Friction Stir Processed Stainless Steel, Ultrason. Sonochem., 2018, 44, p 331–339. https://doi.org/10.1016/j.ultsonch.2018.02.041CrossRef

18.

Z. Wang, Y. Bao, W. Xu, Q. Song, K. Yang and Y. Jiang, Effect of Solution Treatment on the Cavitation Erosion Behavior of Mn-N Duplex Stainless Steel Coating, Tribol. Trans., 2021, 64, p 936–942. CrossRef

19.

何福善, 向红亮, 顾兴, 刘东. Cr32Ni7Mo3N特级双相不锈钢的空蚀行为. 北京科技大学学报. 36 (2014), 1060–1067.

20.

Z. Wang, Y. Bao, W. Xu, Q. Song, K. Yang and Y. Jiang, Effect of Solution Treatment on the Cavitation Erosion Behavior of Mn-N Duplex Stainless Steel Coating, Tribol. Trans., 2021 https://doi.org/10.1080/10402004.2021.1953656CrossRef

21.

W. Ai, K.H. Lo and C.T. Kwok, Cavitation Erosion of a Spinodally Decomposed Wrought Duplex Stainless Steel in a Benign Environment, Wear, 2019 https://doi.org/10.1016/j.wear.2019.01.097CrossRef

22.

I. Mitelea, L.M. Micu, I. Bordeaşu and C.M. Crăciunescu, Cavitation Erosion of Sensitized UNS S31803 Duplex Stainless Steels, J. Mater. Eng. Perform., 2016, 25, p 1939–1944. https://doi.org/10.1007/s11665-016-2045-0CrossRef

23.

D.H. Mesa, C.M. Garzón and A.P. Tschiptschin, Influence of Cold-Work on the Cavitation Erosion Resistance and on the Damage Mechanisms in High-Nitrogen Austenitic Stainless Steels, Wear, 2011, 271, p 1372–1377. https://doi.org/10.1016/j.wear.2011.01.063CrossRef

24.

S. Vercammen, B. Blanpain, B.C. De Cooman and P. Wollants, Cold Rolling Behaviour of an Austenitic Fe-30Mn-3Al-3Si TWIP-steel: the importance of deformation twinning, Acta Mater., 2004, 52, p 2005–2012. https://doi.org/10.1016/j.actamat.2003.12.040CrossRef

25.

J.C. Li, W. Zheng and Q. Jiang, Stacking Fault Energy of Iron-Base Shape Memory Alloys, Mater. Lett., 1999, 38, p 275–277. https://doi.org/10.1016/S0167-577X(98)00172-4CrossRef

26.

G.C. Kaschner, C.N. Tomé, R.J. McCabe, A. Misra, S.C. Vogel and D.W. Brown, Exploring the Dislocation/Twin Interactions in Zirconium, Mater. Sci. Eng., A, 2007, 463, p 122–127. https://doi.org/10.1016/j.msea.2006.09.115CrossRef

27.

X. Zhang, A. Misra, H. Wang, M. Nastasi, J.D. Embury, T.E. Mitchell, R.G. Hoagland and J.P. Hirth, Nanoscale-Twinning-Induced Strengthening in Austenitic Stainless Steel Thin Films, Appl. Phys. Lett., 2004, 84, p 1096–1098. https://doi.org/10.1063/1.1647690CrossRef

28.

A. Karimi and J.L. Martin, Cavitation Erosion of Materials, Int. Met. Rev., 1986, 31(1), p 1–26. https://doi.org/10.1179/imtr.1986.31.1.1CrossRef

29.

Z.L. Fang, The Effect of Stacking Fault Energy on the Cavitation Erosion Resistance of α-Phase Aluminum Bronzes, Wear, 2002 https://doi.org/10.1016/S0043-1648(02)00168-0CrossRef

30.

H. Liu, J. Liu, B. Wu, Y. Shen, H. Yang, D. Hao and X. Su, Effect of Mn and Al Contents on Hot Ductility of High Alloy Fe-xMn-C-yAl Austenite TWIP Steels, Mater. Sci. Eng. A, 2017, 708, p 360–374. https://doi.org/10.1016/j.msea.2017.10.001CrossRef

31.

M.C. Jo, H. Lee, A. Zargaran, J.H. Ryu, S.S. Sohn, N.J. Kim and S. Lee, Exceptional Combination of Ultra-High Strength and Excellent Ductility by Inevitably Generated Mn-Segregation in Austenitic Steel, Mater. Sci. Eng. A, 2018, 737, p 69–76. https://doi.org/10.1016/j.msea.2018.09.024CrossRef

32.

J.K. Kim and B. Cooman, Stacking Fault Energy and Deformation Mechanisms in Fe-xMn-0.6C-yAl TWIP Steel, Mater. Sci. Eng. A, 2016 https://doi.org/10.1016/j.msea.2016.08.106CrossRef

33.

I. Toor, P.J. Hyun and H.S. Kwon, Development of High Mn–N Duplex Stainless Steel for Automobile Structural Components, Corros. Sci., 2008, 50, p 404–410. https://doi.org/10.1016/j.corsci.2007.07.004CrossRef

34.

Y.H. Jang, S.S. Kim and J.H. Lee, Effect of Different Mn Contents on Tensile and Corrosion Behavior of CD4MCU Cast Duplex Stainless Steels, Mater. Sci. Eng., A, 2005, 396, p 302–310. https://doi.org/10.1016/j.msea.2005.01.046CrossRef

35.

L.G. Martinez, K. Imakuma and A.F. Padilha, Influence of Niobium on Stacking-Fault Energy of All-Austenite Stainless Steels, Steel Res., 1992, 63, p 221–223. https://doi.org/10.1002/srin.199200503CrossRef

36.

J. Takahashi, K. Kawakami, J.I. Hamada and K. Kimura, Direct Observation of Niobium Segregation to Dislocations in Steel, Acta Mater., 2016, 107, p 415–422. https://doi.org/10.1016/j.actamat.2016.01.070CrossRef

37.

H.T. Yan, H.Y. Bi, X. Li and Z. Xu, Influence of Nb on microstructure and Mechanical Properties of 0Cr11 Ferritic Stainless Steel, Iron Steel, 2009, 44, p 59–62. https://doi.org/10.1016/S1003-6326(09)60084-4CrossRef

38.

P.W. Robinson and D.H. Jack, Precipitation of z-Phase in a High-Nitrogen Stainless Steel, J. Heat. Treat., 1985, 4, p 69–74. https://doi.org/10.1007/BF02835491CrossRef

39.

Y. Li, Y. Liu, C. Liu, C. Li and H. Li, Mechanism for the Formation of Z-Phase in 25Cr-20Ni-Nb-N Austenitic Stainless Steel, Mater. Lett., 2018, 233, p 16–19. https://doi.org/10.1016/j.matlet.2018.08.141CrossRef

40.

K.M. Rahman, V.A. Vorontsov and D. Dye, The Effect of Grain Size on the Twin Initiation Stress in a TWIP Steel, Acta Mater., 2015, 89, p 247–257. https://doi.org/10.1016/j.actamat.2015.02.008CrossRef

Titel: Cavitation Erosion Behavior of Nb Strengthened Duplex Stainless Steel Surfacing Layer
verfasst von: Yefeng Bao
Chong Cao
Bingqi Xie
Zirui Wang
Linpo Guo
Ke Yang
Qining Song
Publikationsdatum: 20.05.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 12/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-06996-x

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2022

Corrosion Behaviors of S355 Steel under Simulated Tropical Marine Atmosphere Conditions

Effect of Electromagnetic Force on the Strength of Electromagnetic Impulse Powder Compaction

Revealing the Relationship Between AlN Architectures and the Strengthening Mechanism of the AlN/Al Composites at 350 °C

Influence of Heat Treatment on Microstructure and Properties of High-Velocity Arc-Sprayed Fe-Based-Al2O3-B4C Coating

Effect of Electromagnetic Stirring Frequency on Inconel625-High Strength Low Alloy Steel Functionally Graded Material Fabricated by Wire Arc Additive Manufacturing

Effect of Grain Size on the Mechanical Properties and Formability of AA8021 Aluminum Foil

Premium Partner

Marktübersichten