nach oben

Arabian Journal for Science and Engineering

Erschienen in:

14.08.2020 | Research Article-Civil Engineering

Comparison of Fracture Test Methods for Evaluating the Crack Resistance of Asphalt Mixture

verfasst von: Bochao Zhou, Jianzhong Pei, Jiupeng Zhang, Fucheng Guo, Yong Wen, Peifeng Luo

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 10/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

For the better understanding of fracture test method to evaluate the crack resistance of asphalt mixtures, the current test methods and evaluation indexes were theoretically and experimentally compared, including the indirect tensile test, single edge notch beam test, semicircular bending test (SCB) and disk-shaped compact tension test. The stress intensity factors for different tests were compared, and the appropriate range of notch depth was determined. The SCB was finally selected as the test method for evaluating the crack resistance of the asphalt mixtures. According to the relationship between the fracture energy and notch depths, the essential fracture energy of asphalt mixtures was calculated, and it was recommended as the evaluation index of asphalt mixtures for crack resistance. Furthermore, the failure process of the SCB was analyzed, and the contraflexure point on the load–displacement curve was found and defined. The fracture energy at the contraflexure point could be used to evaluate the ultimate crack resistance of the asphalt mixtures. The application of the essential fracture energy and the contraflexure point can correspond to the actuality of the asphalt pavement, which provides a reference for the crack resistance research of asphalt mixtures in the future.

Vorheriger Artikel Moment-Gradient Factor for Perforated Cellular Steel Beams Under Lateral Torsional Buckling

Nächster Artikel Structural Equation Model of Occupant Satisfaction for Evaluating the Performance of Office Buildings

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Pei, J.; Zhou, B.; Lyu, L.: e-Road: the largest energy supply of the future? Appl. Energy 241, 174–183 (2019). https://doi.org/10.1016/j.apenergy.2019.03.033CrossRef

Cong, L.; Peng, J.; Guo, Z.; Wang, Q.: Evaluation of fatigue cracking in asphalt mixtures based on surface energy. J. Mater. Civ. Eng. 29(3), D4015003 (2017). https://doi.org/10.1061/(asce)mt.1943-5533.0001465CrossRef

Gu, F.; Luo, X.; West, R.C.; Taylor, A.J.; Moore, N.D.: Energy-based crack initiation model for load-related top-down cracking in asphalt pavement. Constr. Build. Mater. 159, 587–597 (2018). https://doi.org/10.1016/j.conbuildmat.2017.11.008CrossRef

Zhang, Y.; Gu, F.; Birgisson, B.; Lytton, R.L.: Modelling cracking damage of asphalt mixtures under compressive monotonic and repeated loads using pseudo J-integral Paris’ law. Road Mater. Pavement 19(3), 525–535 (2018). https://doi.org/10.1080/14680629.2018.1418706CrossRef

Kanerva, H.K.; Vinson, T.S.; Zeng, H.: Low-temperature cracking: field validation of the thermal stress restrained specimen test. No. SHRP-A-401. ¹994

Gauthier, G.; Anderson, D.A.: Fracture mechanics and asphalt binders. Road Mater. Pavement 7(sup1), 9–35 (2006). https://doi.org/10.1080/14680629.2006.9690056CrossRef

Abdulshafi, A.; Majidzadeh, K.: J-integral and cyclic plasticity approach to fatigue and fracture of asphaltic mixtures. Transp. Res. Rec. 1034, 112–123 (1985)

EN 12697-44:2010: Bituminous mixtures—test methods for hot mix asphalt part 44: crack propagation by semi-circular bending test. European Committee for Standardization, Brussels, Belgium (2010)

AASHTO TP 105-13: Standard method of test for determining the fracture energy of asphalt mixtures using the semicircular bend geometry (SCB). American Association of State and Highway Transportation Officials (2013)

10.

Wang, H.; Zhang, C.; Li, L.; You, Z.; Diab, A.: Characterization of low temperature crack resistance of crumb rubber modified asphalt mixtures using semi-circular bending tests. J. Test. Eval. 44(2), 847–855 (2016). https://doi.org/10.1520/jte20150145CrossRef

11.

Zhao, Q.; Ye, Z.: A dimensional analysis on asphalt binder fracture and fatigue cracking. Front. Struct. Civ. Eng. 12(2), 201–206 (2018). https://doi.org/10.1007/s11709-017-0402-1CrossRef

12.

Ling, M.; Luo, X.; Chen, Y.; Hu, S.; Lytton, R.L.: A calibrated mechanics-based model for top-down cracking of asphalt pavements. Constr. Build. Mater. 208, 102–112 (2019). https://doi.org/10.1016/j.conbuildmat.2019.02.090CrossRef

13.

Fakhri, M.; Kharrazi, E.H.; Aliha, M.R.M.: Mixed mode tensile—in plane shear fracture energy determination for hot mix asphalt mixtures under intermediate temperature conditions. Eng. Fract. Mech. 192, 98–113 (2018). https://doi.org/10.1016/j.engfracmech.2018.02.007CrossRef

14.

Ozer, H.; Al-Qadi, I.L.; Lambros, J.; El-Khatib, A.; Singhvi, P.; Doll, B.: Development of the fracture-based flexibility index for asphalt concrete cracking potential using modified semi-circle bending test parameters. Constr. Build. Mater. 115, 390–401 (2016). https://doi.org/10.1016/j.conbuildmat.2016.03.144CrossRef

15.

Dave, E.V.; Hoplin, C.: Flexible pavement thermal cracking performance sensitivity to fracture energy variation of asphalt mixtures. Road Mater. Pavement 16(sup1), 423–441 (2015). https://doi.org/10.1080/14680629.2015.1029697CrossRef

16.

Oshone, M.; Dave, E.; Sias, J.: Asphalt mix fracture energy based reflective cracking performance criteria for overlay mix selection and design for pavements in cold climates. Constr. Build. Mater. 211, 1025–1033 (2019). https://doi.org/10.1016/j.conbuildmat.2019.03.278CrossRef

17.

Li, X.; Braham, A.F.; Marasteanu, M.O.; Buttlar, W.G.; Williams, R.C.: Effect of factors affecting fracture energy of asphalt concrete at low temperature. Road Mater. Pavement 9(sup1), 397–416 (2008). https://doi.org/10.1080/14680629.2008.9690176CrossRef

18.

Li, X.; Marasteanu, M.O.; Kvasnak, A.; Bausano, J.; Williams, R.C.; Worel, B.: Factors study in low-temperature fracture resistance of asphalt concrete. J. Mater. Civ. Eng. 22(2), 145–152 (2010)CrossRef

19.

Zhang, J.; Tan, H.; Pei, J.; Qu, T.; Liu, W.: Evaluating crack resistance of asphalt mixture based on essential fracture energy and fracture toughness. Int. J. Geomech. 19(4), 06019005 (2019). https://doi.org/10.1061/(asce)gm.1943-5622.0001390CrossRef

20.

Saha, G.; Biligiri, K.P.: Fracture properties of asphalt mixtures using semi-circular bending test: a state-of-the-art review and future research. Constr. Build. Mater. 105, 103–112 (2016). https://doi.org/10.1016/j.conbuildmat.2015.12.046CrossRef

21.

Huang, B.; Shu, X.; Zuo, G.: Using notched semi-circular bending fatigue test to characterize fracture resistance of asphalt mixtures. Eng. Fract. Mech. 109, 78–88 (2013). https://doi.org/10.1016/j.engfracmech.2013.07.003CrossRef

22.

Im, S.; Ban, H.; Kim, Y.R.: Characterization of mode-I and mode-II fracture properties of fine aggregate matrix using a semicircular specimen geometry. Constr. Build. Mater. 52, 413–421 (2014). https://doi.org/10.1016/j.conbuildmat.2013.11.055CrossRef

23.

Khalid, H.A.; Monney, O.K.: Moisture damage potential of cold asphalt. Int. J. Pavement Eng. 10(5), 311–318 (2009). https://doi.org/10.1080/10298430802169838CrossRef

24.

Minhajuddin, M.; Saha, G.; Biligiri, K.P.: Crack propagation parametric assessment of modified asphalt mixtures using linear elastic fracture mechanics approach. J. Test. Eval. 44(1S), 1–13 (2016). https://doi.org/10.1520/jte20140510CrossRef

25.

Othman, A.M.: Effect of low-density polyethylene on fracture toughness of asphalt concrete mixtures. J. Mater. Civ. Eng. 22(10), 1019–1024 (2010). https://doi.org/10.1061/(asce)mt.1943-5533.0000106CrossRef

26.

Liu, J.: Low temperature cracking evaluation of asphalt rubber mixtures using semi-circular bending test. Adv. Mater. Res. 243, 4201–4206 (2011). https://doi.org/10.4028/www.scientific.net/amr.243-249.4201CrossRef

27.

Mansourian, A.; Hashemi, S.; Aliha, M.R.M.: Evaluation of pure and mixed modes (I/III) fracture toughness of Portland cement concrete mixtures containing reclaimed asphalt pavement. Constr. Build. Mater. 178, 10–18 (2018). https://doi.org/10.1016/j.conbuildmat.2018.05.130CrossRef

28.

Eghbali, M.R.; Tafti, M.F.; Aliha, M.R.M.; Motamedi, H.: The effect of ENDB specimen geometry on mode I fracture toughness and fracture energy of HMA and SMA mixtures at low temperatures. Eng. Fract. Mech. 216, 106496 (2019). https://doi.org/10.1016/j.engfracmech.2019.106496CrossRef

29.

Motamedi, H.; Fazaeli, H.; Aliha, M.R.M.; Amiri, H.R.: Evaluation of temperature and loading rate effect on fracture toughness of fiber reinforced asphalt mixture using edge notched disc bend (ENDB) specimen. Constr. Build. Mater. 234, 117365 (2020). https://doi.org/10.1016/j.conbuildmat.2019.117365CrossRef

30.

Aliha, M.R.M.; Bahmani, A.; Akhondi, S.: Determination of mode III fracture toughness for different materials using a new designed test configuration. Mater. Des. 86, 863–871 (2015). https://doi.org/10.1016/j.matdes.2015.08.033CrossRef

31.

Aliha, M.R.M.; Bahmani, A.; Akhondi, S.: A novel test specimen for investigating the mixed mode I+III fracture toughness of hot mix asphalt composites—experimental and theoretical study. Int. J. Solids Struct. 90, 167–177 (2016). https://doi.org/10.1016/j.ijsolstr.2016.03.018CrossRef

32.

Aliha, M.R.M.; Sarbijan, M.J.; Bahmani, A.: Fracture toughness determination of modified HMA mixtures with two novel disc shape configurations. Constr. Build. Mater. 155, 789–799 (2017). https://doi.org/10.1016/j.conbuildmat.2017.08.093CrossRef

33.

Pour, P.H.; Aliha, M.R.M.; Keymanesh, M.R.: Evaluating mode I fracture resistance in asphalt mixtures using edge notched disc bend ENDB specimen with different geometrical and environmental conditions. Eng. Fract. Mech. 190, 245–258 (2018). https://doi.org/10.1016/j.engfracmech.2017.11.007CrossRef

34.

Aliha, M.R.M.; Razmi, A.; Mousavi, A.: Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen. Constr. Build. Mater. 190, 612–622 (2018). https://doi.org/10.1016/j.conbuildmat.2018.09.149CrossRef

35.

Ameri, M.; Mansourian, A.; Pirmohammad, S.; Aliha, M.R.M.; Ayatollahi, M.R.: Mixed mode fracture resistance of asphalt concrete mixtures. Eng. Fract. Mech. 93, 153–167 (2012). https://doi.org/10.1016/j.engfracmech.2012.06.015CrossRef

36.

Aliha, M.R.M.; Behbahani, H.; Fazaeli, H.; Rezaifar, M.H.: Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures. Constr. Build. Mater. 54, 623–635 (2014). https://doi.org/10.1016/j.conbuildmat.2013.12.097CrossRef

37.

Aliha, M.R.M.; Fazaeli, H.; Aghajani, S.; Nejad, F.M.: Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures. Constr. Build. Mater. 95, 545–555 (2015). https://doi.org/10.1016/j.conbuildmat.2015.07.165CrossRef

38.

Aliha, M.R.M.; Razmi, A.; Mansourian, A.: The influence of natural and synthetic fibers on low temperature mixed mode I+ II fracture behavior of warm mix asphalt (WMA) materials. Eng. Fract. Mech. 182, 322–336 (2017). https://doi.org/10.1016/j.engfracmech.2017.06.003CrossRef

39.

Aliha, M.R.M.; Fakhri, M.; Kharrazi, E.H.; Berto, F.: The effect of loading rate on fracture energy of asphalt mixture at intermediate temperatures and under different loading modes. Frattura ed Integrità Strutturale 12(43), 113–132 (2018). https://doi.org/10.3221/igf-esis.43.09CrossRef

40.

Aliha, M.R.M.; Behbahani, H.; Fazaeli, H.; Rezaifar, M.H.: Experimental study on mode I fracture toughness of different asphalt mixtures. Sci. Iran 22(1), 120–130 (2015)

41.

Industrial standards of the People’s Republic of China: JTG E20-2011 Standard Test Methods of Asphalt and Asphalt Mixture for Highway Engineering. China Communications Press, Beijing (2011)

42.

Hofman, R.: Description of semi circular bending (SCB) test. Version 31, DWW report number IL2R298 37 (1999)

43.

Molenaar, A.; Scarpas, A.; Liu, X.; Erkens, S.: Semi-circular bending test; simple but useful? J. Assoc. Asph. Paving Technol. 71 (2002)

44.

Bayomy, F.; Mull-Aglan, M.; Abdo, A.; Santi, M.: Evaluation of hot mix asphalt (HMA) fracture resistance using the critical strain energy release rate, Jc. In: Transportation Research Board 85th Annual Meeting (2006)

45.

Tada, H.: The Stress Analysis of Cracks Handbook. Paris Productions Inc., St. Louis (1985)

46.

Sih, G.C.; Matic, P.: A pseudo-linear analysis of yielding and crack growth: strain energy density criterion. In: Defects, Fracture and Fatigue. Springer, Dordrecht, pp. 223–232 (1983)

47.

Huang, B.; Zhang, Z.; Kingery, W.; Zuo, G.: Fatigue crack characteristics of HMA mixtures containing RAP. In: Proceeding 5th International Conference on Cracking in Pavements, RILEM, pp. 631–638 (2005)

48.

Luo, P.: Research on the Asphalt Mixture Crack Test Methods and Evaluation Indexes Based on SCB. Chang’an University, China (2017)

49.

Ekberg, T.D.A.: Failure Fracture Fatigue, an Introduction. Student Literature, Lund (2002)

50.

Lim, I.; Johnston, I.; Choi, S.K.: Stress intensity factors for semi-circular specimens under three-point bending. Eng. Fract. Mech. 44(3), 363–382 (1993). https://doi.org/10.1016/0013-7944(93)90030-vCrossRef

51.

Ayatollahi, M.R.; Aliha, M.R.M.: Wide range data for crack tip parameters in two disc-type specimens under mixed mode loading. Comp. Mater. Sci. 38(4), 660–670 (2007). https://doi.org/10.1016/j.commatsci.2006.04.008CrossRef

52.

Fayed, A.: Numerical evaluation of mode I/II SIF of quasi-brittle materials using cracked semi-circular bend specimen. Eng. Solid Mech. 6(2), 175–186 (2018). https://doi.org/10.5267/j.esm.2018.1.002CrossRef

53.

China Aviation Research Institute. Stress Intensity Factor Handbook. Science Press, China (1993)

54.

Chinese Ministry of Transport: Technical speciications for construction of highway asphalt pavements. JTG F40-2004. China Communications Press, Beijing (2004)

55.

Lyu, G.; Hao, P.; Pang, L.; Wang, H.: Mechanical simulation of semi-circular bending test in asphalt mixtures. J. Wuhan Univ. Technol. 30(3), 58–60 (2008). https://doi.org/10.3963/j.issn.1671-4431.2008.03.015CrossRef

56.

Zhang, J.; Li, X.; Liu, G.; Pei, J.: Effects of material characteristics on asphalt and filler interaction ability. Int. J. Pavement Eng. 20(8), 928–937 (2019). https://doi.org/10.1080/10298436.2017.1366765CrossRef

57.

Zhang, J.; Li, X.; Ma, W.; Pei, J.: Characterizing heterogeneity of asphalt mixture based on aggregate particles movements. Iran J. Sci. Technol. A 43, 81–91 (2019). https://doi.org/10.1007/s40996-018-0125-0CrossRef

58.

Zhang, J.; Fan, Z.; Wang, H.; Sun, W.; Pei, J.; Wang, D.: Prediction of dynamic modulus of asphalt mixture using micromechanical method with radial distribution functions. Mater. Struct. 52(2), 1–12 (2019). https://doi.org/10.1617/s11527-019-1348-7CrossRef

59.

Ding, X.; Ma, T.; Huang, X.: Discrete-element contour-filling modeling method for micro-and macro-mechanical analysis of aggregate skeleton of asphalt mixture. J. Transp. Eng. B Pavement 145(1), 04018056 (2019)CrossRef

60.

Li, J.; Zhang, J.; Qian, G.; Zheng, J.; Zhang, Y.: Three-dimensional simulation of aggregate and asphalt mixture using parameterized shape and size gradation. J. Mater. Civ. Eng. 31(3), 04019004 (2019). https://doi.org/10.1061/(asce)mt.1943-5533.0002623CrossRef

61.

Ministry of Transport of PR China (MTPRC): Specifications for design of highway asphalt pavement. JTGD50-2017. Beijing: China Communications Press (2017)

Titel: Comparison of Fracture Test Methods for Evaluating the Crack Resistance of Asphalt Mixture
verfasst von: Bochao Zhou
Jianzhong Pei
Jiupeng Zhang
Fucheng Guo
Yong Wen
Peifeng Luo
Publikationsdatum: 14.08.2020
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 10/2020
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-020-04838-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 10/2020

Comparative Evaluation of Waste Cooking Oil and Waste Engine Oil Rejuvenated Asphalt Concrete Mixtures

Signal Timing Optimization Algorithm for an Intersection Connected with an Urban Expressway

Prediction of Marshall Mix Design Parameters in Flexible Pavements Using Genetic Programming

A Real-Time Productivity Tracking Framework Using Survey-Cloud-BIM Integration

Probabilistic Seismic Resilience-Based Cost–Benefit Analysis for Bridge Retrofit Assessment

Behaviour and Residual Strength Prediction of Recycled Aggregates Concrete Exposed to Elevated Temperatures

Premium Partner

Marktübersichten