nach oben

The Journal of Supercomputing

Erschienen in:

10.01.2022

Design and energy dissipation analysis of simple QCA multiplexer for nanocomputing

verfasst von: Angshuman Khan, Rajeev Arya

Erschienen in: The Journal of Supercomputing | Ausgabe 6/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The multiplexer is an integral design component of the conventional CMOS technology and modern QCA nanotechnology. It is also an elementary building block of nanocommunication networks and nanocomputing circuits. This article proposes a simple single-layer 2:1 QCA multiplexer without using any wire-crossing and majority voter. The proposed design outperforms prior reported works by ~ 17, ~ 20, and ~ 17%, in terms of cell count, total area measurement, and cell area need, respectively. In addition, an exhaustive energy dissipation analysis of the suggested multiplexer was performed using the tools QCAPro and QDE for a better performance evaluation. In particular, the suggested module is ~ 9% more energy efficient (according to QDE) and ~ 37% better energy-delay cost effective than the best previously reported design. According to QCAPro (γ = 0.5E_K), the proposed design is ~ 31% more energy efficient than the earliest best-reported design.

Vorheriger Artikel Attention-based framework for weakly supervised video anomaly detection

Nächster Artikel An optimized hardware design of a two-dimensional guide filter and its application in image denoising

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Lent CS, Tougaw PD, Porod W, Bernstein GH (1993) Quantum cellular automata. Nanotechnology 4:49–57. https://doi.org/10.1088/0957-4484/4/1/004CrossRef

Tougaw PD, Lent CS (1994) Logical devices implemented using quantum cellular automata. J Appl Phys 75:1818–1825. https://doi.org/10.1063/1.356375CrossRef

Lent CS, Tougaw P (1997) A device architecture for computing with quantum dots. Proc IEEE 85(4):541–557. https://doi.org/10.1109/5.573740CrossRef

Orlov AO, Amlani I, Bernstein GH, Lent CS, Snider GL (1997) Realization of a functional cell for quantum-dot cellular automata. Science. https://doi.org/10.1126/science.277.5328.928CrossRef

Jeon JC (2021) Designing nanotechnology qca–multiplexer using majority function-based nand for quantum computing. J Supercomput 77:1562–1578. https://doi.org/10.1007/s11227-020-03341-8CrossRef

Ahmadpour SS, Mosleh M, Heikalabad SR (2021) Efficient designs of quantum-dot cellular automata multiplexer and ram with physical proof along with power analysis. J Supercomput. https://doi.org/10.1007/s11227-021-03913-2CrossRef

Khan A, Arya R (2021) Optimal demultiplexer unit design and energy estimation using quantum dot cellular automata. J Supercomput 77:1714–1738. https://doi.org/10.1007/s11227-020-03320-zCrossRef

Wang L, Xie G (2018) Novel designs of full adder in quantum-dot cellular automata technology. J Supercompu 74:4798–4816. https://doi.org/10.1007/s11227-018-2481-8CrossRef

Mohammadi M, Mohammadi M, Gorginc S (2016) An efficient design of full adder in quantum-dot cellular automata (qca) technology. Microelectron J 50:35–43. https://doi.org/10.1016/j.mejo.2016.02.004CrossRef

10.

Kamrani H, Heikalabad SR (2021) Design and implementation of multiplication algorithm in quantum-dot cellular automata with energy dissipation analysis. J Supercomput 77:5779–5805. https://doi.org/10.1007/s11227-020-03478-6CrossRef

11.

Khan A, Arya R (2021) High performance nanocomparator: a quantum dot cellular automata-based approach. J Supercomput. https://doi.org/10.1007/s11227-021-03961-8CrossRef

12.

Gudivada AA, Sudha GF (2021) Novel optimized tree-based stack-type architecture for 2n-bit comparator at nanoscale with energy dissipation analysis. J Supercomput 77:4659–4680. https://doi.org/10.1007/s11227-020-03453-1CrossRef

13.

Angizi S, Moaiyeri MH, Farrokhi S, Navi K, Bagherzadeh N (2015) Designing quantum-dot cellular automata counters with energy consumption analysis. Microprocess Microsyst 39(7):512–520. https://doi.org/10.1016/j.micpro.2015.07.011CrossRef

14.

Angizi S, Sarmadi S, Sayedsalehi S, Navi K (2015) Design and evaluation of new majority gate-based ram cell in quantum-dot cellular automata. Microelectron J 46(1):43–51. https://doi.org/10.1016/j.mejo.2014.10.003CrossRef

15.

Lent CS, Tougaw PD (1993) Lines of interacting quantum dot cells: a binary wire. J Appl Phys. https://doi.org/10.1063/1.355196CrossRef

16.

Lent CS, Isaksen B (2003) Clocked molecular quantum-dot cellular automata. IEEE Trans Electron Devices 50(9):1890–1896. https://doi.org/10.1109/TED.2003.815857CrossRef

17.

Majeed AH, Alkaldy E, Zainal MS, Navi K, Nor D (2020) Optimal design of ram cell using novel 2:1 multiplexer in QCA technology. Circuit world 46(2):147–158. https://doi.org/10.1108/CW-06-2019-0062CrossRef

18.

Jeon JC (2020) Low-complexity qca universal shift register design using multiplexer and d flip-flop based on electronic correlations. J Supercomput 76:6438–6452. https://doi.org/10.1007/s11227-019-02962-yCrossRef

19.

Khan A, Mandal S (2019) Robust multiplexer design and analysis using quantum dot cellular automata. Int J Theor Phys 58(3):719–733. https://doi.org/10.1007/s10773-018-3970-5MathSciNetCrossRefMATH

20.

Ahmadpour S, Mosleh M (2018) A novel fault-tolerant multiplexer in quantum-dot cellular automata technology. J Supercomput 74(9):4696–4716. https://doi.org/10.1007/s11227-018-2464-9CrossRef

21.

Mosleh M (2018) A novel design of multiplexer based on nanoscale quantum-dot cellular automata. Concurr Comput Pract Exp 31(13):1–16. https://doi.org/10.1002/cpe.5070CrossRef

22.

Asfestani MN, Heikalabad SR (2017) A unique structure for the multiplexer in quantum dot cellular automata to create a revolution in design of nanostructures. Physica B 512:91–99. https://doi.org/10.1016/j.physb.2017.02.028CrossRef

23.

Rashidi H, Rezai A, Soltany S (2016) High-performance multiplexer architecture for quantum-dot cellular automata. J Comput Electron 15(3):968–981. https://doi.org/10.1007/s10825-016-0832-3CrossRef

24.

Das JC, De D (2016) Optimized multiplexer design and simulation using quantum dot cellular automata. Indian J Pure Appl Phys 54:802–811

25.

Sen B, Goswami M, Mazumdar S, Sikdar BK (2015) Towards modular design of reliable quantum-dot cellular automata logic circuit using multiplexers. Comput Electr Eng 45:42–54. https://doi.org/10.1016/j.compeleceng.2015.05.001CrossRef

26.

Walus K, Dysart TJ, Jullien GA, Budiman RA (2004) QCADesigner: a rapid design and Simulation tool for quantum-dot cellular automata. IEEE Trans Nanotechnol 3(1):26–31. https://doi.org/10.1109/TNANO.2003.820815CrossRef

27.

Sill Torres F, Wille R, Niemann P, Drechsler R (2018) An energy-aware model for the logic synthesis of quantum-dot cellular automata. IEEE Trans Comput Aided Des Integr Circ Syst 37(12):3031–3041CrossRef

28.

Timler J, Lent CS (2002) Power gain and dissipation in quantum-dot cellular automata. J Appl Phys 91:823–831. https://doi.org/10.1063/1.1421217CrossRef

29.

Srivastava S, Asthana A, Bhanja S, Sarkar S, “QCAPro - An error-power estimation tool for QCA circuit design”, (2011) IEEE International Symposium of Circuits and Systems (ISCAS). Rio de Janeiro 2011:2377–2380. https://doi.org/10.1109/ISCAS.2011.5938081CrossRef

30.

Khan A, Arya R (2021) Towards cost analysis and energy estimation of simple multiplexer and demultiplexer using quantum dot cellular automata. Int Nano Lett. https://doi.org/10.1007/s40089-021-00352-yCrossRef

Titel: Design and energy dissipation analysis of simple QCA multiplexer for nanocomputing
verfasst von: Angshuman Khan
Rajeev Arya
Publikationsdatum: 10.01.2022
Verlag: Springer US
Erschienen in: The Journal of Supercomputing / Ausgabe 6/2022
Print ISSN: 0920-8542
Elektronische ISSN: 1573-0484
DOI: https://doi.org/10.1007/s11227-021-04191-8

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 6/2022

An optimized hardware design of a two-dimensional guide filter and its application in image denoising

A flexible deadline-driven resource provisioning and scheduling algorithm for multiple workflows with VM sharing protocol on WaaS-cloud

An reinforcement learning-based speech censorship chatbot system

LBTM: A lightweight blockchain-based trust management system for social internet of things

High-fidelity reversible data hiding based on PVO and median preserving

A new selfish thing detection method based on Voronoi diagram for Internet of Things

Premium Partner