nach oben

The Journal of Supercomputing

Erschienen in:

07.01.2022

Design and implementation of efficient QCA full-adders using fault-tolerant majority gates

verfasst von: J. A. Bravo-Montes, A. Martín-Toledano, A. Sánchez-Macián, O. Ruano, F. Garcia-Herrero

Erschienen in: The Journal of Supercomputing | Ausgabe 6/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

CMOS technology is facing physical limitations in scaling the manufacturing process. Therefore, to deepen the development of better designs in a smaller area, it is necessary to look for other alternatives. One of the most studied approaches is Quantum Cellular Automata (QCA). However, it has the disadvantage of its reliability during the manufacturing processes, with high error rates that are difficult to improve. To contribute to the design of more reliable operators based on this technology, new fault-tolerant full-adders are presented in this paper. The proposed solutions improve area up to 57.14%, total energy dissipation up to 36.27%, and average energy dissipation per cycle up to 36.22% compared to those previously proposed. This reduction in power consumption is especially important to make QCA more competitive as it has to operate in low-temperature environments.

Vorheriger Artikel A flexible deadline-driven resource provisioning and scheduling algorithm for multiple workflows with VM sharing protocol on WaaS-cloud

Nächster Artikel Evaluating low-level software-based hardening techniques for configurable GPU architectures

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

To obtain the results, QCADesigner has been used. The QCADesigner-E (QD-E) is an extension of the QCADesigner. It calculates the estimation of the power dissipation of QCA circuits. It is integrated as an additional simulation module that is based on the Coherence Vector Simulation (CVSE) [9, 10]

Note that, comparisons to CMOS technology are omitted as it is outside of this work’s scope and is already analyzed in the literature by other authors.

Powell JR (2008) The Quantum Limit to Moore’s Law. Proc IEEE 96(8):1247. https://doi.org/10.1109/JPROC.2008.925411

Soares T, Nizer Rahmeier J, Lima V, Augusto Lascasas Freitas L, Melo L, Vilela Neto O (2018) NMLSim: a nanomagnetic logic (NML) circuit designer and simulation tool. J Comput Electron 17:1370. https://doi.org/10.1007/s10825-018-1215-8CrossRef

Gu Z, Nowakowski ME, Carlton D, Storz R, Hong J, Chao W, Lambson B, Bennett P, Alam MT, Marcus MA, Doran A, Young A, Scholl A, Bokor J (2014) Speed and reliability of nanomagnetic logic technology, arXiv : Mesoscale and Nanoscale Physics

Wolkow RA, Livadaru L, Pitters J, Taucer M, Piva P, Salomons M, Cloutier M, Martins BVC (2014) Silicon Atomic Quantum Dots Enable Beyond-CMOS Electronics, Field-Coupled Nanocomputing: Paradigms, Progress, and Perspectives (Springer Berlin Heidelberg), pp. 33–58. https://doi.org/10.1007/978-3-662-43722-3-3

Karunaratne DK, Bhanja S (2012) Study of single layer and multilayer nano-magnetic logic architectures. J Appl Phys 111(7):07A928. https://doi.org/10.1063/1.3676052CrossRef

Lent CS, Tougaw PD, Porod W, Bernstein GH (1993) Quantum cellular automata. Nanotechnol 4(1):49. https://doi.org/10.1088/0957-4484/4/1/004CrossRef

Orlov A, Amlani I, Bernstein G, Lent CS, Snider GL (1997) Realization of a functional cell for quantum-dot cellular automata. Sci 277(5328):928. https://doi.org/10.1126/science.277.5328.928CrossRef

Farazkish R, Sayedsalehi S, Navi K (2012) Novel design for quantum dots cellular automata to obtain fault-tolerant majority gate. J Nanotechnol. https://doi.org/10.1155/2012/943406CrossRef

Walus K, Dysart TJ, Jullien GA, Budiman RA (2004) QCADesigner: a rapid design and Simulation tool for quantum-dot cellular automata. IEEE Trans Nanotechnol 3(1):26. https://doi.org/10.1109/TNANO.2003.820815CrossRef

10.

Torres FS (2015) Manual for QCADesigner-Energy (QD-E). github.com/FSillT/QCADesigner-E/blob/master/ManualQDE.pdf

11.

Patterson JLHD (2018) Computer Organization and Design: The Hardware / Software Interface (RISC-V Edition) (Morgan Kaufmann)

12.

Hauck ADS (2008) Reconfigurable Computing: The Theory and Practice of FPGA-Based Computation (Morgan Kaufmann)

13.

Safoyev N, Jeon J (2018) Coplanar QCA adders for arithmetic circuits. Int J Eng Technol (UAE) 7:15. https://doi.org/10.14419/ijet.v7i4.4.19597CrossRef

14.

Safoyev N, Jeon JC (2020) Design and evaluation of cell interaction based vedic multiplier using quantum-dot cellular automata, Electron 9(6). https://doi.org/10.3390/electronics9061036

15.

Rasouli Heikalabad S, Salimzadeh F, Zirak Barughi Y (2020) A unique three-layer full adder in quantum-dot cellular automata. Comput Electr Eng.

16.

Ahmadpour SS, Mosleh M, Rasouli Heikalabad S (2019) Robust QCA full-adders using an efficient fault-tolerant five-input majority gate. Int J Circuit Theory Appl 47:1037. https://doi.org/10.1002/cta.2634CrossRef

17.

Abedi D, Jaberipur G, Sangsefidi M (2015) Coplanar full adder in quantum-dot cellular automata via clock-zone-based crossover. IEEE Trans Nanotechnol 14(3):497. https://doi.org/10.1109/TNANO.2015.2409117CrossRef

18.

Mokhtari D, Rezai A, Rashidi H, Rabiei F, Emadi S, Karimi A (2018) Design of novel efficient full adder architecture for Quantum-dot Cellular Automata technology. FACTA UNIVERSITATIS Ser Electron Energ. https://doi.org/10.2298/FUEE1802279MCrossRef

19.

Ahmadpour SS, Mosleh M, Rasouli Heikalabad S (2020) The design and implementation of a robust single-layer QCA ALU using a novel fault-tolerant three-input majority gate. J Supercomput 76:10155. https://doi.org/10.1007/s11227-020-03249-3CrossRef

20.

Liu W, Zhang T, McLarnon E, O’Neill M, Montuschi P, Lombardi F (2019) Design and Analysis of Majority Logic Based Approximate Adders and Multipliers, IEEE Transactions on Emerging Topics in Computing pp. 1–5. https://doi.org/10.1109/TETC.2019.2929100

21.

Niemier M (2004) Designing digital systems in quantum cellular automata. Ph.D. thesis, University of Notre Dame

22.

Reis D (2016) Robustness analysis and enhancement strategies for quantum-dot cellular automata structures. Ph.D. thesis

23.

Danehdaran F, Bagherian Khosroshahy M, Navi K, Bagherzadeh N (2018) Design and power analysis of new coplanar one-bit full-adder cell in quantum-dot cellular automata. J Low Power Electron 14:38. https://doi.org/10.1166/jolpe.2018.1529CrossRef

24.

Kavitha SS, Kaulgud N (2017) Quantum dot cellular automata (QCA) design for the realization of basic logic gates, pp. 314–317. https://doi.org/10.1109/ICEECCOT.2017.8284519

25.

Shin S, Jeon JC, Kee-Young Y (2014) Design of wire-crossing technique based on difference of cell state in quantum-dot cellular automata. Int J Control Autom. https://doi.org/10.14257/ijca.2014.7.4.14CrossRef

26.

Hosseinzadeh H, Heikalabad SR (2018) A novel fault tolerant majority gate in quantum-dot cellular automata to create a revolution in design of fault tolerant nanostructures, with physical verification. Microelectron Eng 192(C):52. https://doi.org/10.1016/j.mee.2018.01.019CrossRef

27.

Du H, Hongjun L (2016) Design and analysis of new fault-tolerant majority gate for quantum-dot cellular automata. J Comput Electron 15:1484. https://doi.org/10.1007/s10825-016-0918-yCrossRef

28.

Kumar D, Mitra D (2016) Design of a practical fault-tolerant adder in QCA. Microelectron J 53:90. https://doi.org/10.1016/j.mejo.2016.04.004CrossRef

29.

Sun M, Lv H, Zhang Y, Xie GJ (2018) the fundamental primitives with fault-tolerance in quantum-dot cellular automata. J Electron Test 34:1. https://doi.org/10.1007/s10836-018-5723-zCrossRef

30.

Farazkish R (2018) Novel efficient fault-tolerant full-adder for quantum-dot cellular automata. Int J Nano Dimens 9(1):58

31.

Wang X, Xie G, Deng F, Quan Y, Lü H (2018) Design and comparison of new fault-tolerant majority gate based on quantum-dot cellular automata, J Semicond 39(8). https://doi.org/10.1088/1674-4926/39/8/085001

32.

Ahmadpour SS, Mosleh M (2019) New designs of fault-tolerant adders in quantum-dot cellular automata. Nano Commun Netw 19:10. https://doi.org/10.1016/j.nancom.2018.11.001CrossRef

33.

Moghimizadeh T, Mosleh M (2019) A novel design of fault-tolerant RAM cell in quantum-dot cellular automata with physical verification. J Supercomput 75:5688. https://doi.org/10.1007/s11227-019-02812-xCrossRef

Titel: Design and implementation of efficient QCA full-adders using fault-tolerant majority gates
verfasst von: J. A. Bravo-Montes
A. Martín-Toledano
A. Sánchez-Macián
O. Ruano
F. Garcia-Herrero
Publikationsdatum: 07.01.2022
Verlag: Springer US
Erschienen in: The Journal of Supercomputing / Ausgabe 6/2022
Print ISSN: 0920-8542
Elektronische ISSN: 1573-0484
DOI: https://doi.org/10.1007/s11227-021-04247-9

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 6/2022

Evaluating low-level software-based hardening techniques for configurable GPU architectures

Driver attention prediction based on convolution and transformers

Application of intelligent real-time image processing in fitness motion detection under internet of things

LBTM: A lightweight blockchain-based trust management system for social internet of things

An extended visual methods to perform data cluster assessment in distributed data systems

TRAPPY: a truthfulness and reliability aware application placement policy in fog computing

Premium Partner