nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

04.04.2022 | ORIGINAL ARTICLE

Design of a novel integrated ultrasonic tool holder for friction stir welding

verfasst von: Ju Jianzhong, Long Zhili, Ye Shuyuan, Liu Yongzhi, Zhao Heng

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 9-10/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Ultrasonic vibration friction stir welding (UVFSW) has shown advantages in reducing welding defects and improving welding quality in aerospace, automobile, and power electronics. In this study, we design a novel 20-kHz integrated ultrasonic tool holder in FSW. The finite element model of FSW transducer is established, where the elastic modulus is measured by non-destructive acoustic. In the three transducer prototypes with alloy steel, the effect of prestress on resonant frequency is investigated and the ultrasonic vibration is measured. It proves that the resonant frequencies are well consistent between simulation model and the experiment by the elastic modulus testing and the prestress optimization. The ultrasonic amplitude of the pin is up to 24 μm. The experiment also indicates that the vibration is different with the steel material properties. Our findings can have a guidance to the design for a general ultrasonic actuator. The integrated FSW ultrasonic tool has potential to apply in a confined space in general machining equipment.

Vorheriger Artikel Accurate and robust sub-pixel refinement for fillet weld joint based on directional maximum projection

Nächster Artikel Influence of variable loading path pattern on deformation and grain size in large-scale electric upsetting process of Nimonic superalloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Gibson BT, Lammlein DH, Prater TJ, Longhurst TJ, Cox CD, Ballun MC (2014) Friction stir welding process, automation, and control. J Manuf Process 16(1):56–73. https://doi.org/10.1016/j.jmapro.2013.04.002CrossRef

Meng XC, Huang YX, Cao J, Shen JJ, Santos JFD (2020) Recent progress on control strategies for inherent issues in friction stir welding. Prog Mater Sci 115:1–74. https://doi.org/10.1016/j.pmatsci.2020.100706CrossRef

Verma M, Ahmed S, Saha P (2021) Challenges, process requisites/inputs, mechanics and weld performance of dissimilar micro-friction stir welding (dissimilar μFSW): a comprehensive review. J Manuf Process 68:249–276. https://doi.org/10.1016/j.jmapro.2021.05.045CrossRef

Texier D, Atmani F, Bocher P, Nadeau F, Chen J, Zedan Y, Vanderesse N, Demers V (2018) Fatigue performances of FSW and GMAW aluminum alloys welded joints: competition between microstructural and structural-contact-fretting crack initiation. Int J Fatigue 116:220–233. https://doi.org/10.1016/j.ijfatigue.2018.06.020CrossRef

Zhao J, Jiang F, Jian H, Wen K, Jiang L, Chen X (2010) Comparative investigation of tungsten inert gas and friction stir welding characteristics of Al-Mg-Sc alloy plates. Mater Des 31(1):306–311. https://doi.org/10.1016/j.matdes.2009.06.012

Liu X, Lan SH, Ni J (2015) Electrically assisted friction stir welding for joining Al 6061 to TRIP 780 steel. J Mater Process Technol 219:112–123. https://doi.org/10.1016/j.jmatprotec.2014.12.002CrossRef

Bang HS, Bang HS, Jeon GH, Oh IH, Ro CS (2012) Gas tungsten arc welding assisted hybrid friction stir welding of dissimilar materials Al6061-T6 aluminum alloy and STS304 stainless steel. Mater Des 37:48–55. https://doi.org/10.1016/j.matdes.2011.12.018CrossRef

Sun YF, Konishi Y, Kamai M, Fujii H (2013) Microstructure and mechanical properties of S45C steel prepared by laser-assisted friction stir welding. Mater Des 47:842–849. https://doi.org/10.1016/j.matdes.2012.12.078CrossRef

Liu ZL, Meng XC, Ji SD, Li ZW, Wang L (2018) Improving tensile properties of Al/Mg joint by smashing intermetallic compounds via ultrasonic-assisted stationary shoulder friction stir welding. J Manuf Process 31:552–559. https://doi.org/10.1016/j.jmapro.2017.12.022CrossRef

10.

Lv XQ, Wu CS, Yang CL, Padhy GK (2018) Weld microstructure and mechanical properties in ultrasonic enhanced friction stir welding of Al alloy to Mg alloy. J Mater Process Technol 254:145–157. https://doi.org/10.1016/j.jmatprotec.2017.11.031CrossRef

11.

Abbasi M, Givi M, Bagheri B (2020) New method to enhance the mechanical characteristics of Al-5052 alloy weldment produced by tungsten inert gas. P I Mech Eng B-J Eng 5: 1–9. https://doi.org/10.1177/0954405420929777

12.

Meng XC, Jin YY, Ji SD, Yan DJ (2018) Improving friction stir weldability of Al/Mg alloys via ultrasonically diminishing pin adhesion. J Mater Sci Technol 34(10):1817–1822. https://doi.org/10.1016/j.jmst.2018.02.022CrossRef

13.

Baradarani F, Mostafapour A, Shalvandi M (2019) Effect of ultrasonic assisted friction stir welding on microstructure and mechanical properties of AZ91-C magnesium alloy. Trans Nonferrous Met Soc China 29(12):2514–2522. https://doi.org/10.1016/S1003-6326(19)65159-9CrossRef

14.

Zhao WZ, Wu CS, Su H (2020) Numerical investigation of heat generation and plastic deformation in ultrasonic assisted friction stir welding. J Manuf Process 56: 967–980. https://doi.org/10.1016/j.jmapro.2020.05.047

15.

Abbasi M, Bagheri B, Sharifi F (2021) Simulation and experimental study of dynamic recrystallization process during friction stir vibration welding of magnesium alloys. Trans Nonferrous Met Soc China 31(9): 2626–2650. https://doi.org/10.1016/S1003-6326(21) 65681–9

16.

Bagheri B, Abdollahzadeh A, Abbasi M, Kokabi AH (2020) Numerical analysis of vibration effect on friction stir welding by smoothed particle hydrodynamics (SPH). Int J Adv Manuf Technol 110(3):1–20. https://doi.org/10.1007/s00170-020-05839-0CrossRef

17.

Park K, Kim GY, Ni J (2007) Design and analysis of ultrasonic assisted friction stir welding. ASME 2007 International Mechanical Engineering Congress and Exposition 3: 731–737. https://doi.org/10.1115/IMECE2007-44007

18.

Kumar S, Wu CS (2020) Suppression of intermetallic reaction layer by ultrasonic assistance during friction stir welding of Al and Mg based alloys. J Alloy Compd 827: 1–14. https://doi.org/10.1016/j.jallcom.2020.154343

19.

Lai RL, He DQ, Liu LC, Ye SY (2014) A study of the temperature field during ultrasonic-assisted friction-stir welding. Int J Adv Manuf Technol 73:321–327. https://doi.org/10.1007/s00170-014-5813-8CrossRef

20.

Amini S, Amiri MR (2014) Study of ultrasonic vibrations' effect on friction stir welding. Int J Adv Manuf Technol 73: 127–135. https://doi.org/10.1007/s00170-014-5806-7

21.

Wu MX, Wu CS, Gao S (2017) Effect of ultrasonic vibration on fatigue performance of AA 2024–T3 friction stir weld joints. J Manuf Process 29:85–95. https://doi.org/10.1016/j.jmapro.2017.07.023CrossRef

22.

Hu YY, Liu HJ, Fujii H (2019) Improving the mechanical properties of 2219–T6 aluminum alloy joints by ultrasonic vibrations during friction stir welding. J Mater Process Technol 271:75–84. https://doi.org/10.1016/j.jmatprotec.2019.03.013CrossRef

23.

Strass B, Wagner G, Conrad C, Wolter B, Benfer S, Fuerbeth W (2014) Realization of Al/Mg-hybrid-joints by ultrasound supported friction stir welding-mechanical properties, microstructure and corrosion behavior. Adv Mat Res 966–967:521–535. https://doi.org/10.4028/www.scientific.net/AMR.966-967.521CrossRef

24.

Tarasov SY, Rubtsov VE, Fortuna SV, Eliseev AA, Chumaevsky AV, Kalashnikova TA, Kolubaev EA (2017) Ultrasonic-assisted aging in friction stir welding on Al-Cu-Li-Mg aluminum alloy. Weld World 61(4):679–690. https://doi.org/10.1007/s40194-017-0447-8CrossRef

25.

Astashev VK, Pichugin KA, Li X, Meadows A, Babitsky VI (2020) Resonant tuning of langevin transducers for ultrasonically assisted machining applications. IEEE Trans Ultrason Ferroelectr Freq Control 67(9):1888–1896. https://doi.org/10.1109/TUFFC.2020.2991836CrossRef

26.

Gao J, Altintas Y (2019) Development of a three-degree-of-freedom ultrasonic vibration tool holder for milling and drilling. IEEE-ASME Trans Mechatron 24(3):1238–1247. https://doi.org/10.1109/TMECH.2019.2906904CrossRef

27.

He ZY, He H, Lou J, Li YM, Li DY, Chen YZ, Liu SJ (2020) Fabrication, structure, and mechanical and ultrasonic properties of medical ti6al4v alloys part II: relationship between microstructure and mechanical properties and ultrasonic properties of ultrasonic scalpel. Materials 13(2): 1–13. https://doi.org/10.3390/ma13020284

28.

Zhang Q, Shi SJ, Chen WS (2015) An electromechanical coupling model of a longitudinal vibration type piezoelectric ultrasonic transducer. Ceram Int 41:638–644. https://doi.org/10.1016/j.ceramint.2015.03.200CrossRef

29.

Wang FJ, Zhang HJ, Liang CM, Tian YL, Zhao XY, Zhang DW (2016) Design of high-frequency ultrasonic transducers with flexure decoupling flanges for thermosonic bonding. IEEE Trans Ind Electron 63(4):2304–2312. https://doi.org/10.1109/TIE.2015.2500197CrossRef

30.

Jiang XG, Wang KQ, Zhang DY (2017) Determining the optimal pre-tightening force of a sandwich transducer by measuring resonance resistance. Appl Acoust 118:8–14. https://doi.org/10.1016/j.apacoust.2016.11.009CrossRef

31.

Markham MF (1957) Measurement of elastic constants by the ultrasonic pulse method. J Phys D-Appl Phys 8(6): 56–63. http://iopscience.iop.org/0508–3443/8/S6/312

Titel: Design of a novel integrated ultrasonic tool holder for friction stir welding
verfasst von: Ju Jianzhong
Long Zhili
Ye Shuyuan
Liu Yongzhi
Zhao Heng
Publikationsdatum: 04.04.2022
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 9-10/2022
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-022-09136-w

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9-10/2022

Design and experimental research of dynamic magnetic field device based on Halbach array in magnetorheological polishing

Cutting force and nonlinear chatter stability of ball-end milling cutter

Analysis of metal transfer and weld forming characteristics in triple-wire gas indirect arc welding

Analysis of 3D plastic deformation in vertical rolling based on global weighted velocity field

Enhanced machining features and multi-objective optimization of CNT mixed-EDM process for processing 316L steel

Improvement of formability and corrosion resistance of AZ31 magnesium alloy by pulsed current–assisted laser shock forming

Premium Partner

Marktübersichten