nach oben

Journal of Materials Science: Materials in Electronics

Erschienen in:

01.04.2024

Development of textile-based strain sensing material by bar-coating technique

verfasst von: Amit Kumar Mandal, Dipayan Das, Maloy K. Singha

Erschienen in: Journal of Materials Science: Materials in Electronics | Ausgabe 11/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

With advent of 5G technology, the collection and analysis of physiological data such as limb movement are propelled by Internet of Things (IoT) devices. The wearable textiles have the capability to sense the movement of limbs. In this work, a strain sensing material was developed by employing bar coating technique and using a combination of multi-walled carbon nanotubes (MWCNT), polydimethylsiloxane (PDMS) nanocomposite paste and polyester angle-interlocked knitted fabric. Thus produced textile-based strain sensing material was characterized for piezoresistive properties for up to 20% strain. The measurements revealed remarkable differences in electrical conductivity and strain sensing property along the two principal directions of the knitted fabric. Also, the thermal properties of the strain sensing material were characterized through thermogravimetric analysis along with temperature dependency (from 40 to 80 °C). The least temperature-dependent material was found to be a nanocomposite paste made up of 5% MWCNT. To ensure a proper coating of nanocomposite layer, a specific proportion of the solvent was maintained. Because of this, the higher MWCNT content materials led to form agglomerations that resulted in deviations from the normal trend in both piezoresistive and thermal responses.

Vorheriger Artikel Structure and magneto-electric properties of hydrothermally prepared nanocrystalline GaxFe2−xO3 (x = 0.7, 1 & 1.3)

Nächster Artikel Broadband near-infrared luminescence properties of fluoride phosphor K3AlF6:Cr3+

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

X. Liu et al., Recent progress on smart fiber and textile based wearable strain sensors: materials, fabrications and applications. Adv. Fiber Mater. 4(3), 361–389 (2022). https://doi.org/10.1007/s42765-021-00126-3CrossRef

J. Wang, Textile-based strain sensor for human motion detection. Energy Environ. Mater. 3(1), 80–100 (2020)CrossRef

S. Seyedin et al., MXene composite and coaxial fibers with high stretchability and conductivity for wearable strain sensing textiles. Adv. Funct. Mater. 30(12), 1–11 (2020). https://doi.org/10.1002/adfm.201910504CrossRef

T. Sun, Y.D. Jiang, Z.H. Duan, Z. Yuan, Y. Wang, H.L. Tai, Wearable and washable textile-based strain sensors via a single-step, environment-friendly method. Sci. China Technol. Sci. 64(2), 441–450 (2021). https://doi.org/10.1007/s11431-019-1567-yCrossRef

X. Li, H. Hu, T. Hua, B. Xu, S. Jiang, Wearable strain sensing textile based on one-dimensional stretchable and weavable yarn sensors. Nano Res. 11(11), 5799–5811 (2018). https://doi.org/10.1007/s12274-018-2043-7CrossRef

C. Luo, B. Tian, Q. Liu, Y. Feng, W. Wu, One-step-printed, highly sensitive, textile-based, tunable performance strain sensors for human motion detection. Adv. Mater. Technol. 5(2), 1–8 (2020). https://doi.org/10.1002/admt.201900925CrossRef

M. Zahid et al., Wearable and self-healable textile-based strain sensors to monitor human muscular activities. Composites B 220(May), 108969 (2021). https://doi.org/10.1016/j.compositesb.2021.108969CrossRef

J. Wu, D. Zhou, C.O. Too, G.G. Wallace, Conducting polymer coated lycra. Synth. Met. 155(3), 698–701 (2005). https://doi.org/10.1016/j.synthmet.2005.08.032CrossRef

K.W. Oh, H.J. Park, S.H. Kim, Stretchable conductive fabric for electrotherapy. J. Appl. Polym. Sci. 88(5), 1225–1229 (2003). https://doi.org/10.1002/app.11783CrossRef

10.

M.R. Ayatollahi, S. Shadlou, M.M. Shokrieh, M. Chitsazzadeh, Effect of multi-walled carbon nanotube aspect ratio on mechanical and electrical properties of epoxy-based nanocomposites. Polym. Test. 30(5), 548–556 (2011). https://doi.org/10.1016/j.polymertesting.2011.04.008CrossRef

11.

H.J. Li, W.G. Lu, J.J. Li, X.D. Bai, C.Z. Gu, Multichannel ballistic transport in multiwall carbon nanotubes. Phys. Rev. Lett. 95(8), 1–4 (2005). https://doi.org/10.1103/PhysRevLett.95.086601CrossRef

12.

F.H. Gojny et al., Evaluation and identification of electrical and thermal conduction mechanisms in carbon nanotube/epoxy composites. Polymer (Guildf) 47(6), 2036–2045 (2006). https://doi.org/10.1016/j.polymer.2006.01.029CrossRef

13.

H. Zhang, Flexible textile-based strain sensor induced by contacts. Meas. Sci. Technol. (2015). https://doi.org/10.1088/0957-0233/26/10/105102CrossRef

14.

J. Zhou, X. Xu, Y. Xin, G. Lubineau, Coaxial thermoplastic elastomer-wrapped carbon nanotube fibers for deformable and wearable strain sensors. Adv. Funct. Mater. 28(16), 1705591 (2018)CrossRef

15.

M.A. Kanygin, M. Shafiei, B. Bahreyni, Electrostatic twisting of core-shell nanofibers for strain sensing applications. ACS Appl. Polym. Mater. 2(11), 4472–4480 (2020). https://doi.org/10.1021/acsapm.0c00580CrossRef

16.

O. Atalay, W. Richard Kennon, M. Dawood Husain, Textile-based weft knitted strain sensors: effect of fabric parameters on sensor properties. Sensors (Switzerland) 13(8), 11114–11127 (2013). https://doi.org/10.3390/s130811114CrossRef

17.

A. Chaudhari, S.M. Doshi, C. Murray, E.T. Thostenson, Highly-sensitive carbon nanotube based sensors using everyday fabrics for human motion analysis. Int. SAMPE Tech. Conf. 2019, 1–7 (2019). https://doi.org/10.33599/nasampe/s.19.1412CrossRef

18.

Y. Zheng et al., High-performance wearable strain sensor based on graphene/cotton fabric with high durability and low detection limit. ACS Appl. Mater. Interfaces 12(1), 1474–1485 (2020). https://doi.org/10.1021/acsami.9b17173CrossRefPubMed

19.

E.E. Clulow, H.M. Taylor, 30—An experimental and theoretical investigation of biaxial stress–strain relations in a plain-weave cloth. J. Text. Inst. Trans. 54(8), T323–T347 (1963). https://doi.org/10.1080/19447026308660186CrossRef

20.

S.M. Doshi, C. Murray, A. Chaudhari, E.T. Thostenson, Carbon nanotube coated textile sensors with ultrahigh sensitivity for human motion detection. Proc. IEEE Sensors 2019, 1–4 (2019). https://doi.org/10.1109/SENSORS43011.2019.8956624CrossRef

21.

S. Minapoor, S. Ajeli, H. Hasani, M. Shanbeh, Investigation into the curling behavior of single jersey weft-knitted fabrics and its prediction using neural network model. J. Text. Inst. 104(5), 550–561 (2013). https://doi.org/10.1080/00405000.2012.752124CrossRef

22.

L.M. Arruda, I.P. Moreira, U.K. Sanivada, H. Carvalho, R. Fangueiro, Development of piezoresistive sensors based on graphene nanoplatelets screen-printed on woven and knitted fabrics: optimisation of active layer formulation and transversal/longitudinal textile direction. Materials (Basel) (2022). https://doi.org/10.3390/ma15155185CrossRefPubMedPubMedCentral

23.

L. Wu et al., Screen-printed flexible temperature sensor based on FG/CNT/PDMS composite with constant TCR. J. Mater. Sci. Mater. Electron. 30(10), 9593–9601 (2019). https://doi.org/10.1007/s10854-019-01293-1CrossRef

24.

K. Chu, S.C. Lee, S. Lee, D. Kim, C. Moon, S.H. Park, Smart conducting polymer composites having zero temperature coefficient of resistance. Nanoscale 7(2), 471–478 (2015). https://doi.org/10.1039/c4nr04489dCrossRefPubMed

25.

S. Gong, Z.H. Zhu, Z. Li, Electron tunnelling and hopping effects on the temperature coefficient of resistance of carbon nanotube/polymer nanocomposites. Phys. Chem. Chem. Phys. 19(7), 5113–5120 (2017). https://doi.org/10.1039/c6cp08115kCrossRefPubMed

26.

M. Küçük, M.L. Öveçoğlu, Surface modification and characterization of polyester fabric by coating with low temperature synthesized ZnO nanorods. J. Sol-Gel Sci. Technol. 88(2), 345–358 (2018). https://doi.org/10.1007/s10971-018-4817-5CrossRef

27.

Z. Yildiz, A. Gungor, A. Onen, I. Usta, Synthesis and characterization of dual-curable epoxyacrylates for polyester cord/rubber applications. J. Ind. Text. 46(2), 596–610 (2016). https://doi.org/10.1177/1528083715594980CrossRef

28.

T.C. Chang, C.A. Liao, Z.Y. Lin, Y.K. Fuh, Highly stretchable thermal interface materials with uniformly dispersed network of exfoliated graphite nanoplatelets via ball milled processing route. Microsyst. Technol. 24(9), 3667–3675 (2018). https://doi.org/10.1007/s00542-018-3811-8CrossRef

29.

L.M. Al-Harbi, M.S.A. Darwish, M.M. Khowdiary, I. Stibor, Controlled preparation of thermally stable Fe-poly(dimethylsiloxane) composite by magnetic induction heating. Polymers (Basel) (2018). https://doi.org/10.3390/polym10050507CrossRefPubMedPubMedCentral

30.

C.H. Liu, S.S. Fan, Nonlinear electrical conducting behavior of carbon nanotube networks in silicone elastomer. Appl. Phys. Lett. (2007). https://doi.org/10.1063/1.2432283CrossRef

31.

M. Naftaly et al., Sheet resistance measurements of conductive thin films: a comparison of techniques. Electron. (2021). https://doi.org/10.3390/electronics10080960CrossRef

32.

F. Du, J.E. Fischer, K.I. Winey, Effect of nanotube alignment on percolation conductivity in carbon nanotube/polymer composites. Phys. Rev. B 72(12), 1–4 (2005). https://doi.org/10.1103/PhysRevB.72.121404CrossRef

33.

D.C. Lee, G. Kwon, H. Kim, H.J. Lee, B.J. Sung, Three-dimensional Monte Carlo simulation of the electrical conductivity of carbon nanotube/polymer composites. Appl. Phys. Express (2012). https://doi.org/10.1143/APEX.5.045101CrossRef

34.

J. Lu, M. Lu, A. Bermak, Y.K. Lee, Study of piezoresistance effect of carbon nanotube-PDMS composite materials for nanosensors, in 2007 7th IEEE Int. Conf. Nanotechnol. - IEEE-NANO 2007, Proc. (2007), pp. 1240–1243. https://doi.org/10.1109/NANO.2007.4601407.

35.

X. Chen, A.R. Alian, S.A. Meguid, Coupled electromechanical modeling of piezoresistive behavior of CNT-reinforced nanocomposites with varied morphology and concentration. Eur. J. Mech. A 84(November 2019), 104053 (2020). https://doi.org/10.1016/j.euromechsol.2020.104053CrossRef

36.

H. Zhao, J. Bai, Highly sensitive piezo-resistive graphite nanoplatelet-carbon nanotube hybrids/polydimethylsilicone composites with improved conductive network construction. ACS Appl. Mater. Interfaces 7(18), 9652–9659 (2015). https://doi.org/10.1021/acsami.5b01413CrossRefPubMed

37.

A. Ferrreira, J.G. Rocha, A. Ansón-Casaos, M.T. Martínez, F. Vaz, S. Lanceros-Mendez, Electromechanical performance of poly(vinylidene fluoride)/carbon nanotube composites for strain sensor applications. Sens. Actuators A 178, 10–16 (2012). https://doi.org/10.1016/j.sna.2012.01.041CrossRef

38.

X. Zhang, D. Maddipatla, A.K. Bose, B.B. Narakathu, M.Z. Atashbar, A printed MWCNTs/PDMS based flexible resistive temperature detector. IEEE Int. Conf. Electro Inf. Technol. 2020, 509–513 (2020). https://doi.org/10.1109/EIT48999.2020.9208334CrossRef

39.

C. Lee, L. Jug, E. Meng, High strain biocompatible polydimethylsiloxane-based conductive graphene and multiwalled carbon nanotube nanocomposite strain sensors. Appl. Phys. Lett. (2013). https://doi.org/10.1063/1.4804580CrossRefPubMedPubMedCentral

40.

T. Xiao et al., High temperature response capability in carbon nanotube/polymer nanocomposites. Compos. Sci. Technol. 167(September), 563–570 (2018). https://doi.org/10.1016/j.compscitech.2018.09.023CrossRef

41.

T. Dollase, H.W. Spiess, M. Gottlieb, R. Yerushalmi-Rozen, Crystallization of PDMS: the effect of physical and chemical crosslinks. Europhys. Lett. 60(3), 390–396 (2002). https://doi.org/10.1209/epl/i2002-00276-4CrossRef

42.

G. Cai, M. Yang, Z. Xu, J. Liu, B. Tang, X. Wang, Flexible and wearable strain sensing fabrics. Chem. Eng. J. 325, 396–403 (2017). https://doi.org/10.1016/j.cej.2017.05.091CrossRef

43.

S. Yang et al., All-fabric-based multifunctional textile sensor for detection and discrimination of humidity, temperature, and strain stimuli. J. Mater. Chem. C 9(39), 13789–13798 (2021). https://doi.org/10.1039/d1tc02755gCrossRef

44.

D. Lu et al., Highly durable and fast response fabric strain sensor for movement monitoring under extreme conditions. Adv. Fiber Mater. 5(1), 223–234 (2023). https://doi.org/10.1007/s42765-022-00211-1CrossRef

Titel: Development of textile-based strain sensing material by bar-coating technique
verfasst von: Amit Kumar Mandal
Dipayan Das
Maloy K. Singha
Publikationsdatum: 01.04.2024
Verlag: Springer US
Erschienen in: Journal of Materials Science: Materials in Electronics / Ausgabe 11/2024
Print ISSN: 0957-4522
Elektronische ISSN: 1573-482X
DOI: https://doi.org/10.1007/s10854-024-12503-w

Neuer Inhalt

Bildnachweise

VDI-Icon, Profil Icon, inhalt2, Springer Professional Modul/© Springer Fachmedien Wiesbaden GmbH, Die Gewinner und Laudatoren des Sustainability Award in Automotive 2024/© Uli Regenscheit | ATZlive, Search Icon, Banner Hanser, Suresh Vittal/© Alteryx, Additiv gefertigte Teile/© Marina_Skoropadskaya | Getty Images | iStock, Warnschild "Land unter"/© Bluedesign / Fotolia, Zeitschrift Wissensmanagement Cover, PatentFit-Logo/© Springer Fachmedien Wiesbaden GmbH, ATZ-Webinar: Prototypenfreie Entwicklung durch Offline- und Driver-in-the-Loop-HiL-Tests /© (c) VI-grade, chassis.tech plus 2023/© [M] ATZlive / TÜV SÜD PRODUCT SERVICE GMBH, adäsion-Webinar-Matinee/© krystiannawrocki_ Getty Images

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 11/2024

Development of bifunctional molybdenum-substituted NiO nanocatalyst for the maximization of photocatalysis and gas sensor activities

Luminescence characterization of rare earth (RE = Tb, Dy, Eu) ions activated Ca8NaGd(PO4)6F2 halophosphor synthesis by modified Pechini method

Novel ternary mesoporous Co3CsO4-g-C3N4 nanocomposite as an efficient sorbent for Pb (II) and Cu (II) ions elimination

Studies on the microstructure, magnetic, and electrical transport properties of Dy-substituted Mg–Cu–Zn ferrites

Chloride incorporation for the stability improvement of the MAPI hybrid perovskite

Comparison of sol–gel and hydrothermal synthesis methods on the physical, and photocatalytic properties of Bi1−xCexFe1−xAlxO3 ferrites

Neuer Inhalt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.