nach oben

Acta Mechanica

Erschienen in:

11.05.2023 | Original Paper

Drive-by bridge damage detection based on wavelet analysis of residual contact response of a moving vehicle

verfasst von: Ying Lei, Zhiqiang Jin, Chengkai Qi, Ning Yang

Erschienen in: Acta Mechanica | Ausgabe 3/2024

Einloggen, um Zugang zu erhalten

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The indirect approaches based on the responses of specially designed moving vehicles on bridges to extract bridge dynamic properties have received great research attention. Wavelet transform (WT) is shown to be a useful tool for the analysis of vehicle responses and bridge damage detection in the vehicle-bridge interaction system. However, past studies have demonstrated that road surface roughness poses difficulty in applying wavelet analysis to successfully detect bridge damage. In this paper, a two-step method is proposed for bridge damage detection based on WT analysis of the residual contact response of the front and rear vehicle wheels of a four degrees of freedom (4-DOF) moving vehicle to reduce the influence of road surface roughness. In the first step, the generalized Kalman filter under unknown input (GKF-UI) developed by the authors is used to identify the unknown contact forces and the state vector of the vehicle. Due to the advantages of GKF-UI, acceleration and displacement sensors can be installed conveniently on the vehicle body instead of on the wheel axles in previous studies. Then, the contact-point bridge deflection responses of the front and rear vehicle wheels are estimated from the identified contact force and vehicle state. In the second step, the residual contact-point bridge deflection response is obtained by subtracting the front contact-point bridge deflection and rear contact-point bridge deflection with a time shift to reduce the influence of road surface roughness. Then, the locations of bridge damage can be identified based on WT of the singularities of residual contact-point bridge deflection response. Numerical examples of bridge damage detection demonstrate the effectiveness of the proposed method.

Vorheriger Artikel Efficient model-correction-based reliability analysis of uncertain dynamical systems

Nächster Artikel Investigation of wave propagation and attenuation in periodic supported rails using wave finite element method

Zhang, L., Feng, D.M., Wu, G.: Simultaneous identification of bridge damage and vehicle parameters based on bridge strain responses. Struct. Control Health Monit. 29, e2945 (2022). https://doi.org/10.1002/stc.2945CrossRef

Fan, X.Y., Li, J., Hao, H., Chen, Z.W.: Using multi-type sensor measurements for damage detection of shear connectors in composite bridges under moving loads. Comput. Concr. 20, 521–527 (2017). https://doi.org/10.12989/cac.2017.20.5.521CrossRef

Zhang, Y.F., Zhu, J.S.: Damage identification for bridge structures based on correlation of the bridge dynamic responses under vehicle load. Structures. 33, 68–76 (2021). https://doi.org/10.1016/j.istruc.2021.04.022CrossRef

Nie, Z.H., Li, J.: Bridge condition monitoring under moving loads using two sensor measurements. Struct. Health Monit. (2019). https://doi.org/10.1177/1475921719868930CrossRef

Zhu, X.Q., Law, S.S.: Recent developments in structural health monitoring based on vehicle-bridge interaction. Fundam. Res. Struct. Eng. Retrosp. Prospect. 1(2), 283–288 (2016)

Dahlberg, T.: Vehicle-bridge interaction. Veh. Syst. Dyn. 13, 187–206 (1984). https://doi.org/10.1080/00423118408968775CrossRef

Yang, Y.B., Lin, B.H.: Vehicle-bridge interaction analysis by dynamics condensation method. J. Struct. Eng. 121, 1636–1643 (1995). https://doi.org/10.1061/(ASCE)0733-9445(1995)121:11(1636)CrossRef

Leslaw, K., Hongyi, L., Jerry, W., Jerzy, M.: Finite element analysis of vehicle–bridge interaction. Finite Elem. Anal. Des. 42, 950–959 (2006). https://doi.org/10.1016/j.finel.2006.01.014CrossRef

Yang, Y.B., Chang, C.H., Yau, J.D.: Extracting bridge frequencies from the dynamic response of a passing vehicle. J. Sound Vib. 272, 471–493 (2004). https://doi.org/10.1016/S0022-460X(03)00378-XCrossRef

10.

Konig, P., Salcher, P., Adam, C., Hirzinger, B.: Dynamic analysis of railway bridges exposed to high-speed trains considering the vehicle-track-bridge-soil interaction. Acta Mech. 232, 1–26 (2021). https://doi.org/10.1007/s00707-021-03079-1MathSciNetCrossRef

11.

Li, Z.H., Au, F.T.K.: Damage detection of a continuous bridge from response of a moving vehicle. Shock Vib. 2014, 146802 (2014). https://doi.org/10.1155/2014/146802CrossRef

12.

Mousavi, M., Holloway, D., Olivier, J.C., Gandomi, A.H.: A spline method based on the crack induced deflection for bridge damage detection. Adv. Eng. Softw. 149, 102894 (2020). https://doi.org/10.1016/j.advengsoft.2020.102894CrossRef

13.

Zhang, Y., Wang, L., Xiang, Z.: Damage detection by mode shape squares extracted from a passing vehicle. J. Sound Vib. 331, 291–307 (2012). https://doi.org/10.1016/j.jsv.2011.09.004CrossRef

14.

Tan, C.J., Zhao, H., OBrien, E.J., Uddin, N., Fitzgerald, P.C., McGetrick, P.J., Kim, C.W.: Extracting mode shapes from drive-by measurements to detect global and local damage in bridges. Struct. Infrastruct. Eng. 17, 1582–1596 (2020)

15.

Zhu, X., Cao, M.S., Ostachowicz, W., Xu, W.: Damage identification in bridges by processing dynamic responses to moving loads: features and evaluation. Sensors. 19, 463 (2019)

16.

Khoa, V.N., Hai, T.T.: Multi-cracks detection of a beam-like structure based on the on-vehicle vibration signal and wavelet analysis. J. Sound Vib. 329, 4455–4465 (2010). https://doi.org/10.1016/j.jsv.2010.05.005CrossRef

17.

Khorram, A., Bakhtiari-Nejad, F., Rezaeian, M.: Comparison studies between two wavelet based crack detection methods of a beam subjected to a moving load. Int. J. Eng. Sci. 51, 204–215 (2012). https://doi.org/10.1016/j.ijengsci.2011.10.001CrossRef

18.

McGetrick, P.J., Kim, C.W.: An indirect bridge inspection method incorporating a wavelet-based damage indicator and pattern recognition. In: EURODYN-International Conference on Structural Dynamics. pp, 2605–2612 (2014).

19.

Zhang, B., Qian, Y., Wu, Y.T., Yang, Y.B.: An effective means for damage detection of bridges using the contact-point response of a moving test vehicle. J. Sound Vib. 419, 158–172 (2018). https://doi.org/10.1016/j.jsv.2018.01.015CrossRef

20.

Yang, Y.B., Wang, B.Q., Wang, Z.L., Shi, K., Xu, H.: Scanning of bridge surface roughness from two-axle vehicle response by EKF-UI and contact residual: theoretical study. Sensors. 22, 3410 (2022). https://doi.org/10.3390/s22093410CrossRef

21.

Li, J.T., Zhu, X.Q., Law, S.S., Samali, B.: A two-step drive-by bridge damage detection using Dual Kalman Filter. Int. J. Struct. Stab. Dyn. (2020). https://doi.org/10.1142/S0219455420420067MathSciNetCrossRef

22.

Wang, H.Q., Nagayama, T., Su, D.: Estimation of dynamic tire force by measurement of vehicle body responses with numerical and experimental validation. Mech. Syst. Signal Process. 123, 369–385 (2019). https://doi.org/10.1016/j.ymssp.2019.01.017CrossRef

23.

Yang, Y.B., Li, Y.C., Chang, K.C.: Using two connected vehicles to measure the frequencies of bridges with rough surface: a theoretical study. Acta Mech. 223, 1851–1861 (2012). https://doi.org/10.1007/s00707-012-0671-7MathSciNetCrossRef

24.

Tan, C.J., Elhattab, A., Uddin, N.: "Drive-by’’ bridge frequency-based monitoring utilizing wavelet transform. J. Civ. Struct. Heal. Monit. 7, 615–625 (2017). https://doi.org/10.1007/s13349-017-0246-3CrossRef

25.

Yang, Y.B., Zhang, B., Chen, Y.N., Qian, Y., Wu, Y.T.: Bridge damping identification by vehicle scanning method. Eng. Struct. 183, 637–645 (2019)

26.

Li, J.T., Zhu, X.Q., Guo, J.: Enhanced drive-by bridge modal identification via dual Kalman filter and singular spectrum analysis. Struct. Control Health Monit. (2022). https://doi.org/10.1002/stc.2927CrossRef

27.

Huang, J.S., Li, X.Z., Zhang, F.B., Lei, Y.: Identification of joint structural state and earthquake input based on a generalized Kalman filter with unknown input. Mech. Syst. Signal Process. 151, 107362 (2021). https://doi.org/10.1016/j.ymssp.2020.107362CrossRef

28.

ISO 8608, Mechanical Vibration e Road Surface Profiles e Reporting of Measured Data, (1995)

29.

Ding, Y., Law, S.S., Wu, B., Xu, G.S., Jiang, H.B., Miao, Q.S.: Average acceleration discrete algorithm for force identification in state space. Eng. Struct. 56, 1880–1892 (2013). https://doi.org/10.1016/j.engstruct.2013.08.004CrossRef

30.

Lei, Y., Yang, N.: Simultaneous identification of structural time-varying physical parameters and unknown excitations using partial measurements. Eng. Struct. 214, 110672 (2020). https://doi.org/10.1016/j.engstruct.2020.110672CrossRef

31.

Yang, N., Lei, Y., Li, J., Hao, H., Huang, J.S.: A substructural and wavelet multiresolution approach for identifying time-varying physical parameters by partial measurements. J. Sound Vibraion. 523, 116737 (2022). https://doi.org/10.1016/j.jsv.2021.116737CrossRef

32.

Tada, H., Paris, P.C., Irwin, G.R.: The Stress Analysis of Cracks Handbook, third ed., Del Research Corporation (2000).

33.

Jian, X.D., Xia, Y., Sun, L.: Indirect identification of bridge frequencies using a four-wheel vehicle: theory and three-dimensional simulation. Mech. Syst. Signal Process. 177, 109155 (2020). https://doi.org/10.1016/j.ymssp.2022.109155CrossRef

Titel: Drive-by bridge damage detection based on wavelet analysis of residual contact response of a moving vehicle
verfasst von: Ying Lei
Zhiqiang Jin
Chengkai Qi
Ning Yang
Publikationsdatum: 11.05.2023
Verlag: Springer Vienna
Erschienen in: Acta Mechanica / Ausgabe 3/2024
Print ISSN: 0001-5970
Elektronische ISSN: 1619-6937
DOI: https://doi.org/10.1007/s00707-023-03570-x

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Weitere Artikel der Ausgabe 3/2024

Editorial to special issue “Recent mechanics-based developments in structural dynamics and earthquake engineering”

Modal identification of structures with a dynamic behaviour characterised by global and local modes at close frequencies

Experimental characterization and mechanical modeling of additively manufactured TPU components of innovative seismic isolators

Data generation framework for inverse modeling of nonlinear systems in structural dynamics applications

Shock performance analysis of high-static-low-dynamic stiffness floating raft vibration isolation system

A model considering the longitudinal track–bridge interaction in ballasted railway bridges subjected to high-speed trains

Premium Partner

Marktübersichten