nach oben

Journal of Materials Engineering and Performance

Erschienen in:

29.10.2020

Dynamic Recovery and Recrystallization Behaviors of C71500 Copper-Nickel Alloy Under Hot Deformation

verfasst von: Xin Gao, Hui-bin Wu, Ming Liu, Yuan-xiang Zhang, Xiang-dong Zhou

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 11/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The isothermal compression test was employed to study the influence of deformation temperature and strain rate on the hot deformation behavior of C71500 copper-nickel alloy. According to the characteristics of dynamic recovery (DRV) and dynamic recrystallization (DRX), the Zener–Hollomon parameter lnZ is used as an important parameter to measure the influence of temperature and strain rate on the hot deformation behavior. The critical deformation conditions of DRX are determined by its different values. By analyzing the critical change of work hardening rate, the relationship among critical stress, peak stress and saturation stress transition point is obtained, and the dynamic mathematical model of the whole deformation process is established, which can predict the volume fraction of DRV and DRX well. The DRX nucleation and growth mechanism of C71500 copper-nickel alloy was determined by metallographic analysis. In the current work, the thermodynamic parameters are introduced to determine the critical conditions of the transformation of the deformation state, the transformation process of the hot deformation structure is predicted by the dynamic model, the nucleation and growth mechanism is analyzed, which could provide a complete set of important references for the DRV-based hot deformation alloy, and provide a theoretical basis for the control of the structure state after hot processing.

Vorheriger Artikel Warm Tensile Deformation and Fracture Behavior of AZ31 Magnesium Alloy Sheets Processed by Constrained Groove Pressing

Nächster Artikel Influence of Surface Nanocrystallization and Partial Amorphization Induced by Ultrasonic Shot Peening on Surface Properties of 7075 Aluminum Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

S. Cincera and E. Bresciani, De-nickelification of 70/30 Cupronickel Tubing in a Cooling Heat Exchanger, J. Fail. Anal. Prev., 2012, 12(3), p 300–304CrossRef

A.M. Beccaria and J. Crousier, Influence of Iron Addition on Corrosion Layer Built Up on 70Cu-30Ni Alloy in Sea Water, Br. Corros. J., 2013, 26(3), p 215–219CrossRef

X. Zhu and T. Lei, Characteristics and Formation of Corrosion Product Films of 70Cu-30Ni Alloy in Seawater, Corros. Sci., 2002, 44(1), p 67–79CrossRef

T.J. Glover, Copper-Nickel Alloy for the Construction of Ship and Boat Hulls, Br. Corros. J., 1982, 17(4), p 155–158CrossRef

E. Chassaing, K.V. Quang, and R. Wiart, Mechanism of copper-nickel alloy electrodeposition, J. Appl. Electrochem., 1987, 17(6), p 1267–1280CrossRef

I. Alstrup, U.E. Petersen, and J.R. Rostrup-Nielsen, Propane Hydrogenolysis on Sulfur- and Copper-Modified Nickel Catalysts, J. Catal., 2000, 191(2), p 401–408CrossRef

A. Al-Hashem and J. Carew, The use of Electrochemical Impedance Spectroscopy to Study the Effect of Chlorine and Ammonia Residuals on the Corrosion of Copper-Based and Nickel-Based Alloys in Seawater, Desalination, 2002, 150(3), p 255–262CrossRef

D. James, V.D. Huw, S. David, N. Lembit, and R.G. Compton, Cathodic Stripping Voltammetry of Nickel: Sonoelectrochemical Exploitation of the Ni(III)/Ni(II) Couple, Talanta, 2002, 57(6), p 1045–1051CrossRef

R. Solmaz, A. Döner, and G. Kardaş, The Stability of Hydrogen Evolution Activity and Corrosion Behavior of NiCu Coatings With Long-Term Electrolysis in Alkaline Solution, Int. J. Hydrogen Energy, 2009, 34(5), p 2089–2094CrossRef

10.

A. Sin, E. Kopnin, Y. Dubitsky, A. Zaopo, A.S. Aricò, D.L. Rosa, L.R. Gullo, and V. Antonucci, Performance and Life-Time Behaviour of NiCu-CGO Anodes for the Direct Electro-Oxidation of Methane in IT-SOFCs, J. Power Sources, 2007, 164(1), p 300–305CrossRef

11.

L. Li, G. Wang, J. Liu, and Z.-Q. Yao, Flow Softening Behavior and Microstructure Evolution of Al-5Zn-2Mg Aluminum Alloy During Dynamic Recovery, Trans. Nonferrous Metal. Soc. China, 2014, 24, p 42–48CrossRef

12.

Z. Cai, F. Chen, F. Ma, and J. Guo, Dynamic Recrystallization Behavior and Hot Workability of AZ41M Magnesium Alloy During Hot Deformation, J. Alloy. Compd., 2016, 670(3), p 55–63

13.

F. Cao, X. Fei, and G. Xue, Hot Tensile Deformation Behavior and Microstructural Evolution of a Mg-9.3Li-1.79Al–1.61Zn alloy, Mater. Des., 2016, 92, p 44–57CrossRef

14.

Y.Q. Ning, X. Luo, H.Q. Liang, H.Z. Guo, J.L. Zhang, and K. Tan, Competition Between Dynamic Recovery and Recrystallization During Hot Deformation for TC18 Titanium Alloy, Mater. Sci. Eng., A, 2015, 635, p 77–85CrossRef

15.

T. Wang, B. Li, Z. Wang, Y. Li, and Z. Nie, Influence Mechanism of The Initial Dislocation Boundary on the Adiabatic Shear Sensitivity of Commercial Pure Titanium, Mater. Sci. Eng., A, 2016, 676, p 1–9CrossRef

16.

G. Testa, N. Bonora, A. Ruggiero, G. Iannitti, I. Persechino, M. Hörnqvist, N. Mortazavi, Modelling and simulation of dynamic recrystallization (DRX) in OFHC copper at very high strain rates, Biennial Aps Conference on Shock Compression of Condensed Matter, 1793 (2015)

17.

G. Gottstein, D. Zabardjadi, and H. Mecking, Dynamic Recrystallization in Tension-Deformed Copper Single Crystals, Metal Sci. J., 2013, 13(3–4), p 223–227

18.

H.J. Mcqueen and S. Bergerson, Dynamic Recrystallization of Copper During Hot Torsion, Metal Sci. J., 2013, 6(1), p 25–29CrossRef

19.

S.H. Huang, D.Y. Shu, H.U. Chuan-Kai, and S.F. Zhu, Effect of Strain Rate and Deformation Temperature on Strain Hardening and Softening Behavior Of Pure Copper, Trans. Nonferrous Met. Soc. China, 2016, 26(4), p 1044–1054CrossRef

20.

L. Ning, C. Zhibao, and L. Chen, Dynamic Recrystallization and Microstructure Evolution of BFe10-1-1 Copper Alloy, Hot Work. Technol., 2017, 46(04), p 72–74

21.

Y. Huang, M. Li, Z. Xiao, H. Liu, S. Wang, A Dynamic Recrystallization (DRX) Constitutive Model for Elevated Temperature Flow Behavior of Cu-0.5Cr-0.1Zr Alloy, Metallogr. Microstruct. Anal. pp 1-13 (2016)

22.

Y.-K. Liu, H.-Y. Huang, and J.-X. Xie, Effect of Compression Direction on the Dynamic Recrystallization Behavior of Continuous Columnar-Grained CuNi10Fe1Mn Alloy, Int. J. Miner. Metallur. Mater., 2015, 22(8), p 851–859CrossRef

23.

J. Cai, X. Zhang, K. Wang, and C. Miao, Physics-Based Constitutive Model to Predict Dynamic Recovery Behavior of BFe10-1-2 Cupronickel Alloy during Hot Working, High Temp. Mater. Processes (London), 2016, 35, p 1–9CrossRef

24.

M. Shaban, B. Eghbali, G. Reza Ebrahimi, Evaluation of the Kinetics of Dynamic Recovery in AISI 321 Austenitic Stainless Steel Using Hot Flow Curves, Trans. Indian Inst. Metal, pp 1-7 (2016)

25.

J.J. Jonas, C.M. Sellars, and W.J.M. Tegart, Strength and Structure Under Hot-Working Conditions, Metall Rev, 1969, 14(1), p 1–24CrossRef

26.

G. Maizza, R. Pero, M. Richetta, and R. Montanari, Continuous Dynamic Recrystallization (CDRX) Model for Aluminum Alloys, J. Mater. Sci., 2018, 53(12), p 1–11

27.

X.H. Zhao, D.D. Liu, W.U. Xiang-Hong, G.R. Liu, and C. Liang, Flow Behavior and Constitutive Description of Cu-Zr-Ce Alloy at High Temperature, J. Central South Univ., 2018, 25(5), p 1013–1024CrossRef

28.

H. Yin, K. Kwak, D. Kishi, Y. Mine, R. Ding, P. Bowen, K. Takashima, Anisotropy of slip behaviour in single-colony lamellar structures of Ti-6Al-4V. Mater. Sci. Eng. A, 715, (2018)

29.

H. Huang, X. Li, Z. Dong, W. Li, S. Huang, D. Meng, X. Lai, T. Liu, S. Zhu, and L. Vitos, Critical Stress for Twinning Nucleation in CrCoNi-Based Medium and High Entropy Alloys, Acta Mater., 2018, 149, p S1359645418301459CrossRef

30.

S.X. Zhu, Y. Liu, Y. Li, B.H. Tian, Y. Zhang, K.X. Song, S.X. Zhu, Y. Liu, Y. Li, and B.H. Tian, Critical Conditions of Dynamic Recrystallization of the Cu-0.4Zr-0.15Y Alloy, Trans. Mater. Heat Treatment, 2017, 38(5), p 172–178

31.

Y. Estrin and H. Mecking, A Unified Phenomenological Description of Work Hardening and Creep Based on One-Parameter Models, Acta Metall., 1984, 32(1), p 57–70CrossRef

32.

Y. Bergström and H. Hallén, An Improved Dislocation Model for the Stress-Strain Behaviour of Polycrystalline α-Fe, Mater. Ence. Eng., 1982, 55(1), p 49–61

33.

S.S. Satheesh-Kumar, T. Raghu, P.P. Bhattacharjee, G. Appa-Rao, and U. Borah, Constitutive modeling for predicting peak stress characteristics during hot deformation of hot isostatically processed nickel-base superalloy, J. Mater. Sci., 2015, 50(19), p 6444–6456CrossRef

34.

X. Gao, H.-b. Wu, M. Liu, Y.-x. Zhang, Effect of annealing time on grain boundary characteristics of C71500 cupronickel alloy tubes with different deformation, Mater. Character, 110603 (2020)

35.

J. McCarley and S. Tin, Utilization of hot deformation to trigger Strain Induced Boundary Migration (SIBM) in Ni-base Superalloys, Mater. Sci. Eng., A, 2018, 720, p S0921509318302703CrossRef

36.

B.J. Lv, J. Peng, and Z. Chu, The Effect of Icosahedral Phase on Dynamic Recrystallization Evolution and Hot Workability of Mg-2.0Zn-0.3Zr-0.2Y Alloy, J. Mater. Eng. Perform., 2015, 24(9), p 3502–3512CrossRef

37.

H.N. Qi, Z.M. Zhang, J.M. Yu, X.Y. Yin, and Z.Y. Du, Dynamic Recrystallization of Mg-8Gd-3Y-1Nd-0.5Zr Alloy During Hot Deformation, Mater. Sci. Forum, 2017, 898, p 311–322CrossRef

Titel: Dynamic Recovery and Recrystallization Behaviors of C71500 Copper-Nickel Alloy Under Hot Deformation
verfasst von: Xin Gao
Hui-bin Wu
Ming Liu
Yuan-xiang Zhang
Xiang-dong Zhou
Publikationsdatum: 29.10.2020
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 11/2020
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-05221-x

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2020

Effect of Shot Peening on Residual Stress Distribution and Microstructure Evolution of Artificially Defected 50CrV4 Steel

Experimental Investigation on the Effects of Core/Facing Interface Performance on the Low-Velocity Impact Behavior of Honeycomb Sandwich Panels

Microstructure and Properties of CoCrFeNiTi High-Entropy Alloy Coating Fabricated by Laser Cladding

The Effect of Welding Parameters on Static and Dynamic Behaviors of Spot Welded Ti6Al4V Sheets

Heterogeneous Microstructure of Low-Carbon Microalloyed Steel and Mechanical Properties

Aging Treatment Effect on Microstructure and Mechanical Properties of Ti-5Al-3V-1.5Mo-2Zr Titanium Alloy Drill Pipe

Premium Partner

Marktübersichten