nach oben

Journal of Materials Engineering and Performance

Erschienen in:

12.12.2022 | Technical Article

Effect of BN(h) and Si₃N₄ Reinforcement Content on the Morphology and Properties of Ni-W Coatings

verfasst von: Bertrand Vigninou Gbenontin, Min Kang, Joseph Ndiithi Ndumia, Samuel Mbugua Nyambura, Emmanuel Awuah, Liu Jitao, Ren Anhua

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 18/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Ni-W-BN(h)-Si₃N₄ nanocomposite coatings were deposited on AISI 1045 steel using a traditional electrodeposition technique. The effects of BN(h) and Si₃N₄ nanoparticles on the performance of the coatings were investigated. Varying concentrations of Si₃N₄ nanoparticles were added to the bath of Ni-W-BN(h) nanocomposite coatings having an optimized concentration of BN(h) nanoparticles. The electrodeposited coatings were characterized using a laser scanning confocal microscope tester, scanning electron microscope, energy dispersive spectroscopy, x-ray diffraction, Vickers microhardness, and high-frequency reciprocating CFT-1 wear tester. The results indicated that the peaks of the coatings were ascribed to (111) of FCC nickel-based solid solution. Ni, W, B, Si, and N elements were uniformly distributed in the coating. Ni-W-BN(h) coating fabricated with 6 g/L of BN(h) presented a hardness of 680.98 HV_0.025 and a wear rate of 2.53 × 10⁻⁶ mm³·N⁻¹m⁻¹. Ni-W-BN(h) composite coating's microhardness and wear resistance were improved by maintaining the BN(h) concentration at 6 g/L and raising the Si₃N₄ concentration to 6 g/L. Ni-W-BN(h)-Si₃N₄ coating fabricated with 12 g/L of (BN(h) + Si₃N₄) presented the best microhardness (722.86 HV_0.025) and wear rate (2.08 × 10⁻⁶ mm³·N⁻¹m⁻¹). The wear mechanisms of all coatings were studied.

Vorheriger Artikel Phase Transformation in Carbon during Mechanical Alloying of Graphite: Experimental and Molecular Dynamic Study

Nächster Artikel Effect of Sealing Treatment on the Corrosion Resistance of Detonation-Sprayed Fe-Based Amorphous Coating

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Y. Lu, H. Li, H. Zhang, G. Huang, H. Xu, Z. Qin, and X. Lu, Zr-Based Metallic Glass Coating for Corrosion Resistance Improvement of 45 Steel, Mater. Trans., 2017, 58(9), p 1319–1321. https://doi.org/10.2320/matertrans.M2017118CrossRef

G. Huang, L. Qu, Y. Lu, Y. Wang, H. Li, Z. Qin, and X. Lu, Corrosion Resistance Improvement of 45 Steel by Fe-Based Amorphous Coating, Vacuum, 2018, 153, p 39–42. https://doi.org/10.1016/j.vacuum.2018.03.042CrossRef

H. Liu, J. Liu, P. Chen, H. Yang, J. Hao, and X. Tian, Microstructure and Properties of AlCoCrFeNiTi High-Entropy Alloy Coating on AISI1045 Steel Fabricated by Laser Cladding, J. Mater. Eng. Perform., 2019, 28(3), p 1544–1552. https://doi.org/10.1007/s11665-019-03949-9CrossRef

H. Liu, C. Wang, X. Zhang, Y. Jiang, C. Cai, and S. Tang, Improving the Corrosion Resistance and Mechanical Property of 45 Steel Surface by Laser Cladding with Ni60CuMoW Alloy Powder, Surf. Coat. Technol., 2013, 228, p S296–S300. https://doi.org/10.1016/j.surfcoat.2012.05.115CrossRef

D.H. Jeong, U. Erb, K.T. Aust, and G. Palumbo, The Relationship Between Hardness and Abrasive Wear Resistance of Electrodeposited Nanocrystalline Ni-P Coatings, Scripta Mater., 2003, 48(8), p 1067–1072. https://doi.org/10.1016/s1359-6462(02)00633-4CrossRef

M.M. Khruschov, Principles of Abrasive Wear, Wear, 1974, 28, p 69–88. https://doi.org/10.1016/0043-1648(74)90102-1CrossRef

B. Swain, S. Bhuyan, R. Behera, S.S. Mohapatra, and A. Behera, Wear: A Serious Problem in Industry, Tribology in Materials and Manufacturing—Wear, Friction and Lubrication, In A. Patnaik, T. Singh, V. Kukshal, (eds.), IntechOpen, 2020, pp. 1–20

S.Y. Wang, P.K. Chu, B.Y. Tang, X.B. Tian, X.F. Wang, and Q.Z. Lin, Enhancement of Surface Properties of 45# carbon Steel Using Plasma Immersion Ion Implantation, Thin Solid Films, 1997, 311, p 190–195. https://doi.org/10.1016/s0040-6090(97)00465-3CrossRef

D. Clark, D. Wood, and U. Erb, Industrial Applications of Electrodeposited Nanocrystals, Nanostrut. Mater., 1997, 9, p 755–758. CrossRef

10.

M.K. Tripathi, D.K. Singh, and V.B. Singh, Electrodeposition of Ni-Fe/BN Nano-Composite Coatings from a Nonaqueous Bath and Their Characterization, Int. J. Electrochem. Sci, 2013, 8, p 3454–3471. CrossRef

11.

B. Bostani, N. Parvini Ahmadi, and S. Yazdani, Manufacturing of Functionally Graded Ni-ZrO2 Composite Coating Controlled by Stirring Rate of the Electroplating Bath, Surf. Eng., 2016, 32(7), p 495–500. https://doi.org/10.1080/02670844.2016.1148307CrossRef

12.

A. Amadeh, M. Harsij Sani, and H. Moradi, Wear Behavior of Carbon Steel Electrodeposited by Nanocrystalline Ni-W Coating, Int. J. ISSI, 2009, 6, p 14–19.

13.

H.-T. Wang, H.-H. Sheu, M.-D. Ger, and K.-H. Hou, The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Electrodeposited Nanocrystalline Ni-W/diamond Composite Coatings, Surf. Coat. Technol., 2014, 259, p 268–273. https://doi.org/10.1016/j.surfcoat.2014.03.064CrossRef

14.

B.V. Gbenontin, M. Kang, N.J. Ndiithi, S.M. Nyambura, E. Awuah, and Y. Zhang, Effect of Grit Blasting and Polishing Pretreatments on the Microhardness, Adhesion and Corrosion Properties of Electrodeposited Ni-W/SiC Nanocomposite Coatings on 45 Steel Substrate, Crystals, 2021, 11(7), p 729. https://doi.org/10.3390/cryst11070729CrossRef

15.

X. Shi, Z. Zhang, L. Dai, Y. Lv, Z. Xu, Y. Yin, Z. Liao, and G. Wei, Effect of Al2O3 Nanoparticles and Heat Treatment on the Wear Resistance of Electrodeposited Ni-W/Al2O3 Composite Coatings, J. Mater. Eng. Perform., 2021, 31(4), p 3094–3106. https://doi.org/10.1007/s11665-021-06392-xCrossRef

16.

Y. Wang, Q. Zhou, K. Li, Q. Zhong, and Q.B. Bui, Preparation of Ni-W-SiO₂ Nanocomposite Coating and Evaluation of its Hardness and Corrosion Resistance, Ceram. Int., 2015, 41(1), p 79–84. https://doi.org/10.1016/j.ceramint.2014.08.034CrossRef

17.

Y. Zhang, X. Leng, X. Wang, P. Ou, W. Zhang, and Q. Zhou, Electrodeposition and Characterization of Ni-W-Cr₂O₃ Nanocomposite Coating, Metallogr. Microstruct. Anal., 2017, 6(6), p 519–526. https://doi.org/10.1007/s13632-017-0402-5CrossRef

18.

Y. Fan, Y. He, P. Luo, T. Shi, and X. Chen, Pulse Current Electrodeposition and Properties of Ni-W-GO Composite Coatings, J. Electrochem. Soc., 2015, 163(3), p D68–D73. https://doi.org/10.1149/2.0171603jesCrossRef

19.

S. Mbugua Nyambura, M. Kang, J. Zhu, Y. Liu, Y. Zhang, and N.J. Ndiithi, Synthesis and Characterization of Ni-W/Cr2O3 Nanocomposite Coatings Using Electrochemical Deposition Technique, Coatings, 2019 https://doi.org/10.3390/coatings9120815CrossRef

20.

B. Li, W. Zhang, D. Li, Y. Huan, and J. Dong, Microstructural, Surface and Electrochemical Properties of a Novel Ni-B/Ni-W-BN Duplex Composite Coating by Co-electrodeposition, Appl. Surf. Sci., 2018, 458, p 305–318. https://doi.org/10.1016/j.apsusc.2018.07.100CrossRef

21.

S. Sangeetha and G.P. Kalaignan, Tribological and Electrochemical Corrosion Behavior of Ni-W/BN (Hexagonal) Nano-composite Coatings, Ceram. Int., 2015, 41(9), p 10415–10424. https://doi.org/10.1016/j.ceramint.2015.04.089CrossRef

22.

S. Sangeetha and G.P. Kalaignan, Studies on the Electrodeposition and Characterization of PTFE Polymer Inclusion in Ni-W-BN Nanocomposite Coatings for Industrial Applications, RSC Adv., 2015, 5(90), p 74115–74125. https://doi.org/10.1039/c5ra11069fCrossRef

23.

H. Li, Y. He, T. He, Y. Fan, Q. Yang, and Y. Zhan, The Influence of Pulse Plating Parameters on Microstructure and Properties of Ni-W-Si₃N₄ Nanocomposite Coatings, Ceram. Int., 2016, 42(16), p 18380–18392. https://doi.org/10.1016/j.ceramint.2016.08.171CrossRef

24.

B. Li and W. Zhang, Microstructural, Surface and Electrochemical Properties of Pulse Electrodeposited Ni-W/Si₃N₄ Nanocomposite Coating, Ceram. Int., 2018, 44(16), p 19907–19918. https://doi.org/10.1016/j.ceramint.2018.07.254CrossRef

25.

G. Gyawali, B. Joshi, K. Tripathi, and S.W. Lee, Preparation of Ni-W-Si₃N₄ Composite Coatings and Evaluation of Their Scratch Resistance Properties, Ceram. Int., 2016, 42(2), p 3497–3503. https://doi.org/10.1016/j.ceramint.2015.10.153CrossRef

26.

M. Srivastava, V.K. William Grips, and K.S. Rajam, Influence of SiC, Si₃N₄ and Al₂O₃ Particles on the Structure and Properties of Electrodeposited Ni, Mater. Lett., 2008, 62(20), p 3487–3489. https://doi.org/10.1016/j.matlet.2008.03.008CrossRef

27.

B.D. Cullity, S.R. Stock, and S. Stock, Elements of x-ray Diffraction Fraction, ed., Addison-Wesley, 2001

28.

N.P. Wasekar and G. Sundararajan, Sliding Wear Behavior of Electrodeposited Ni-W Alloy and Hard Chrome Coatings, Wear, 2015, 342–343, p 340–348. https://doi.org/10.1016/j.wear.2015.10.003CrossRef

29.

N.P. Wasekar, S. Verulkar, M.V.N. Vamsi, and G. Sundararajan, Influence of Molybdenum on the Mechanical Properties, Electrochemical Corrosion and Wear Behavior of Electrodeposited Ni-Mo Alloy, Surf. Coat. Technol., 2019, 370, p 298–310. https://doi.org/10.1016/j.surfcoat.2019.04.059CrossRef

30.

P. Yang, N. Wang, J. Zhang, Y. Lei, and B. Shu, Investigation of the Microstructure and Tribological Properties of CNTs/Ni Composites Prepared by Electrodeposition, Mater. Res. Express, 2022, 9(3), p 036404. https://doi.org/10.1088/2053-1591/ac5c2bCrossRef

31.

K. Holmberg and A. Mathews, Coatings Tribology: A Concept, Critical Aspects and Future Directions, Thin Solid Films, 1994, 253, p 173–178. https://doi.org/10.1016/0040-6090(94)90315-8CrossRef

32.

M. Uysal, H. Akbulut, M. Tokur, H. Algül, and T. Çetinkaya, Structural and Sliding Wear Properties of Ag/Graphene/WC Hybrid Nanocomposites Produced by Electroless Co-deposition, J. Alloy. Compd., 2016, 654, p 185–195. https://doi.org/10.1016/j.jallcom.2015.08.264CrossRef

33.

S. Ahmadiyeh, A. Rasooli, M.G. Hosseini, and A.H.S. Farhood, Superior Corrosion and Wear Resistance of Pulse Plated Ni-W-B/SiC Composite Coatings, Mater. Chem. Phys., 2021, 270, p 124761. https://doi.org/10.1016/j.matchemphys.2021.124761CrossRef

34.

S. Xing, L. Wang, C. Jiang, H. Liu, W. Zhu, and V. Ji, Influence of Y₂O₃ Nanoparticles on Microstructures and Properties of Electrodeposited Ni-W-Y₂O₃ Nanocrystalline Coatings, Vacuum, 2020, 181, p 109665. https://doi.org/10.1016/j.vacuum.2020.109665CrossRef

35.

E. Ünal and İH. Karahan, Effects of Ultrasonic Agitation Prior to Deposition and Additives in the Bath on Electrodeposited Ni-B/hBN Composite Coatings, J. Alloy. Compd., 2018, 763, p 329–341. https://doi.org/10.1016/j.jallcom.2018.05.312CrossRef

36.

X. Meng, Electrodeposition of Ni-Mo/TiO2 Nanocomposite Coatings on Low-Carbon Steels for Improving Corrosion Resistance, Int. J. Electrochem. Sci., 2020, 15, p 6198–6206. https://doi.org/10.20964/2020.07.35CrossRef

37.

O. Younes, L. Zhu, Y. Rosenberg, Y. Shacham-Diamand, and E. Gileadi, Electroplating of Amorphous Thin Films of Tungsten/Nickel Alloys, Langmuir, 2001, 17, p 8270–8275. https://doi.org/10.1021/la010660xCrossRef

38.

N. Guglielm, Kinetics of the Deposition of Inert Particles from Electrolytic Baths, J. Electrochem. Sac., 1972, 119(8), p 1009–1112. CrossRef

39.

K.-H. Hou, T. Han, H.-H. Sheu, and M.-D. Ger, Preparation and Wear Resistance of Electrodeposited Ni-W/diamond Composite Coatings, Appl. Surf. Sci., 2014, 308, p 372–379. https://doi.org/10.1016/j.apsusc.2014.04.175CrossRef

40.

M.-C. Chou, M.-D. Ger, S.-T. Ke, Y.-R. Huang, and S.-T. Wu, The Ni-P-SiC Composite Produced by Electro-Codeposition, Mater. Chem. Phys., 2005, 92(1), p 146–151. https://doi.org/10.1016/j.matchemphys.2005.01.021CrossRef

41.

S. Dilek, H. Algül, A. Akyol, A. Alp, H. Akbulut, and M. Uysal, Pulse Electro Co-deposition of Submicron-Sized TiC Reinforced Ni-W Coatings: Tribological and Corrosion Properties, J. Asian Ceram. Soc, 2021, 9(2), p 673–685. https://doi.org/10.1080/21870764.2021.1911058CrossRef

42.

X.-H. Zhang, X.-X. Li, W.-J. Liu, Y.-Q. Fan, H. Chen, and T.-X. Liang, Preparation and Tribological Behavior of Electrodeposited Ni-W-GO Composite Coatings, Rare Met., 2018, 38(7), p 695–703. https://doi.org/10.1007/s12598-018-1173-0CrossRef

43.

E. Beltowska-Lehman, P. Indyka, A. Bigos, M. Kot, and L. Tarkowski, Electrodeposition of Nanocrystalline Ni-W Coatings Strengthened by Ultrafine Alumina Particles, Surf. Coat. Technol., 2012, 211, p 62–66. https://doi.org/10.1016/j.surfcoat.2011.10.021CrossRef

44.

G. Gyawali, R. Adhikari, H.S. Kim, H.-B. Cho, and S.W. Leec, Effect of h-BN Nanosheets Codeposition on Electrochemical Corrosion Behavior of Electrodeposited Nickel Composite Coatings, ECS Electrochem. Lett., 2013, 2(3), p C7–C10. https://doi.org/10.1149/2.003303eelCrossRef

45.

G. Gyawali, S.H. Cho, D.J. Woo, and S.W. Lee, Pulse Electrodeposition and Characterisation of Ni-SiC Composite Coatings in Presence of Ultrasound, Trans. Inst. Met. Finish., 2012, 90(5), p 274–280. https://doi.org/10.1179/0020296712Z.00000000043CrossRef

46.

J. Qin, X. Zhang, K. Umporntheep, V. Auejitthavorn, R. Li, P. Wangyao, Y. Boonyongmaneerat, S. Limpanart, M. Ma, and R. Liu, Electrodeposition and Mechanical Properties of Ni-W Matrix Composite Coatings with Embedded Amorphous Boron Particles, Int. J. Electrochem. Sci., 2016, 11, p 9529–9541. https://doi.org/10.20964/2016.11.58CrossRef

47.

Z. Shahri, S.R. Allahkaram, and A. Zarebidaki, Electrodeposition and Characterization of Co-BN (h) nanocomposite Coatings, Appl. Surf. Sci., 2013, 276, p 174–181. https://doi.org/10.1016/j.apsusc.2013.03.062CrossRef

48.

G.N.K. Ramesh Bapu, Characteristics of Ni-BN Electrocomposites, Pla. Surf. Finish. 1995, pp. 70–73

49.

S. Shanmugasamy, K. Balakrishnan, A. Subasri, S. Ramalingam, and A. Subramania, Development of CeO₂ Nanorods Reinforced Electrodeposited Nickel Nanocomposite Coating and its Tribological and Corrosion Resistance Properties, J. Rare Earths, 2018, 36(12), p 1319–1325. https://doi.org/10.1016/j.jre.2018.06.004CrossRef

50.

H. Gül, F. Kılıç, M. Uysal, S. Aslan, A. Alp, and H. Akbulut, Effect of Particle Concentration on the Structure and Tribological Properties of Submicron Particle SiC Reinforced Ni metal Matrix Composite (MMC) Coatings Produced by Electrodeposition, Appl. Surf. Sci., 2012, 258(10), p 4260–4267. https://doi.org/10.1016/j.apsusc.2011.12.069CrossRef

51.

S. Queyreau, G. Monnet, and B. Devincre, Orowan strengthening and Forest Hardening Superposition Examined by Dislocation Dynamics Simulations, Acta Mater., 2010, 58(17), p 5586–5595. https://doi.org/10.1016/j.actamat.2010.06.028CrossRef

52.

M.A. Wimmera, J. Loosb, R. Nassutt, M. Heitkemperd, and A. Fischer, The Acting Wear Mechanisms on Metal-on-Metal Hip Joint Bearings: In Vitro Results, Wear, 2001, 250, p 129–139. CrossRef

53.

M. Alizadeh, M. Mirak, E. Salahinejad, M. Ghaffari, R. Amini, and A. Roosta, Structural Characterization of Electro-Codeposited Ni-Al₂O₃-SiC Nanocomposite Coatings, J. Alloy. Compd., 2014, 611, p 161–166. https://doi.org/10.1016/j.jallcom.2014.04.181CrossRef

54.

M. Uysal, H. Algül, E. Duru, Y. Kahraman, A. Alp, and H. Akbulut, Tribological Properties of Ni-W-TiO2-GO Composites Produced by Ultrasonically-Assisted Pulse Electro Co-deposition, Surf. Coat. Technol., 2021, 410, p 126942. https://doi.org/10.1016/j.surfcoat.2021.126942CrossRef

55.

P. Bercot, E. Pena-Munoz, and J. Pagetti, Electrolytic Composite Ni-PTFE Coatings: An Adaptation of Guglielmi’s Model for the Phenomena of Incorporation, Surf. Coat. Technol., 2002, 157, p 282–289. CrossRef

56.

J.P. Celis, J.R. Roos, and C. Buelens, A Mathematical Model for the Electrolytic Codeposition of Particles with a Metallic Matrix, J. Electrochem. Soc., 1987, p 1402

57.

Q. Zhang, Y. Feng, Z. Chen, W. Liao, S. Zhang, J. Zhou, and L. Wu, Preparation and Corrosion Resistance of Ni-W-CF Composite Coating on P110 Steel, Coatings, 2022, 12(2), p 231. https://doi.org/10.3390/coatings12020231CrossRef

58.

Q. Niu, Z. Li, X. Yan, G. Liu, and B. Wang, Preparation and Corrosion Resistance of Ni-W-Y2O3-ZrO2 Nanocomposite Coatings, Int. J. Electrochem. Sci., 2017, 12, p 10259–10268. https://doi.org/10.20964/2017.11.100CrossRef

59.

S. Shajahan and A. Basu, Corrosion, Oxidation and Wear Study of Electro-Co-Deposited ZrO₂-TiO₂ Reinforced Ni-W Coatings, Surf. Coat. Technol., 2020, 393, p 125729. https://doi.org/10.1016/j.surfcoat.2020.125729CrossRef

60.

X.J. Sun and J.G. Li, Friction and Wear Properties of Electrodeposited Nickel-Titania Nanocomposite Coatings, Tribol. Lett., 2007, 28(3), p 223–228. https://doi.org/10.1007/s11249-007-9254-5CrossRef

61.

S. Paydar, A. Jafari, M.E. Bahrololoom, and V. Mozafari, Influence of BN and B₄C Particulates on Wear and Corrosion Resistance of Electroplated Nickel Matrix Composite Coatings, Tribol. Mater. Surf. Interfaces, 2015, 9(2), p 105–110. https://doi.org/10.1179/1751584x15y.0000000007CrossRef

62.

N.P. Wasekar, L. Bathini, and G. Sundararajan, Tribological Behavior of Pulsed Electrodeposited Ni-W/SiC Nanocomposites, J. Mater. Eng. Perform., 2018, 27(10), p 5236–5245. https://doi.org/10.1007/s11665-018-3608-zCrossRef

63.

S. Ahmadiyeh, A. Rasoolia, and M.G. Hossein, Ni-B/SiC Nanocomposite Coating Obtained by Pulse Plating and Evaluation of its Electrochemistry and Mechanical Properties, Surf. Eng., 2018 https://doi.org/10.1080/02670844.2018.1498823CrossRef

Titel: Effect of BN(h) and Si3N4 Reinforcement Content on the Morphology and Properties of Ni-W Coatings
verfasst von: Bertrand Vigninou Gbenontin
Min Kang
Joseph Ndiithi Ndumia
Samuel Mbugua Nyambura
Emmanuel Awuah
Liu Jitao
Ren Anhua
Publikationsdatum: 12.12.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 18/2023
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-07712-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 18/2023

Influence of Finish Rolling Temperature on Microstructure and Properties of Hot-Rolled SUS436L Stainless Steel

Corrosion Behavior of EN18 Steel and Copper in the Sulfuric Acid Medium for As-Bought and Annealed Materials

Corrosion Behavior of High Strength Steel Welded Joint in Seawater: A Combinatorial Study Based on General and Localized Electrochemical Methods

Fabrication and Characterization of Al2O3 Particles Reinforced Ni-P-Polytetrafluoroethylene Nanocomposite Coating by Jet Electrodeposition

Microstructure and Mechanical Property of Copper–Steel Dissimilar Friction Stir Weld Fabricated by Presetting an Integrated Aluminum Barrier Layer

Structure and Chemical State of Oxide Films Formed on Crystalline TiNi Alloy and Glassy Ti-Ni-Ta-Si Surface Alloy

Premium Partner

Marktübersichten