nach oben

Journal of Materials Engineering and Performance

Erschienen in:

15.02.2022 | Technical Article

Effect of Fused Filament Fabrication Process Parameters on Compressive Strength of Thermoplastic Polyurethane and Polylactic Acid Lattice Structures

verfasst von: Nidhi Dixit, Prashant K. Jain

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 7/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The ability to manufacture customized parts has added a value to Additive Manufacturing (AM) process. The strength of additively manufactured parts largely depends on the process parameters associated with it. The current study is focused on parametric optimization of Fused Filament Fabrication (FFF) process by using Taguchi method for fabrication of lattice structures. Two different material TPU and PLA were chosen for conducting experiments and the impact of three process parameters: layer thickness, infill density and printing speed on the compressive strength of lattice structures was studied. S/N ratio and ANOVA analysis were performed to examine the importance of errors involved in experiments and finding the significance of each parameter. The layer thickness of 0.1 mm, infill density of 100% and printing speed of 40 mm/s was found to be the optimal combination for maximizing the compressive strength.

Vorheriger Artikel Effects of Ag Content and Hot-Rolling on Microstructure and Mechanical Properties of Zn-Cu-xAg-Zr Alloy

Nächster Artikel Effect of Nb Addition on the Machinability of a Pearlitic Gray Cast Iron

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

P.K. Jain, P.M. Pandey and P.V.M. Rao, Effect of Delay Time on Part Strength in Selective Laser Sintering, Int. J. Adv. Manuf. Technol., 2009, 43, p 117–126. https://doi.org/10.1007/s00170-008-1682-3CrossRef

S.H. Huang, P. Liu, A. Mokasdar and L. Hou, Additive Manufacturing and Its Societal Impact: A Literature Review, Int. J. Adv. Manuf. Technol., 2013, 67, p 1191–1203. https://doi.org/10.1007/s00170-012-4558-5CrossRef

M. Vaezi, H. Seitz and S. Yang, A Review on 3D Micro-additive Manufacturing Technologies, Int. J. Adv. Manuf. Technol., 2013, 67, p 1721–1754. https://doi.org/10.1007/s00170-012-4605-2CrossRef

Ye G, Bi H, Chen L, Hu Y. Compression and Energy Absorption Performances of 3D Printed Polylactic Acid Lattice Core Sandwich Structures. 3D Print Addit. Manuf. 6:333–43 (2019). https://doi.org/10.1089/3dp.2019.0068.

N. Kumar, P.K. Jain, P. Tandon and P.M. Pandey, The Effect of Process Parameters on Tensile Behavior of 3D Printed Flexible Parts of Ethylene Vinyl Acetate (EVA), J. Manuf. Process., 2018, 35, p 317–326. https://doi.org/10.1016/j.jmapro.2018.08.013CrossRef

K. Ushijima, W.J. Cantwell, R.A.W. Mines, S. Tsopanos and M. Smith, An Investigation into the Compressive Properties of Stainless Steel Micro-lattice Structures, J. Sandw. Struct. Mater., 2011, 13, p 303–329. https://doi.org/10.1177/1099636210380997CrossRef

M. Dawoud, I. Taha and S.J. Ebeid, Mechanical Behaviour of ABS: An Experimental Study Using FDM and Injection Moulding Techniques, J. Manuf. Process., 2016, 21, p 39–45. https://doi.org/10.1016/j.jmapro.2015.11.002CrossRef

L.J. Gibson, Cellular Solids: Structure, Properties and Applications, Spring Term, 2011, 2011(595), p 7107.

S. Yu, J. Sun and J. Bai, Investigation of Functionally Graded TPMS Structures Fabricated by Additive Manufacturing, Mater. Des., 2019, 182, 108021. https://doi.org/10.1016/j.matdes.2019.108021CrossRef

10.

T. Maconachie, R. Tino, B. Lozanovski, M. Watson, A. Jones, C. Pandelidi et al., The Compressive Behaviour of ABS Gyroid Lattice Structures Manufactured by Fused Deposition Modelling, Int. J. Adv. Manuf. Technol., 2020, 107, p 4449–4467. https://doi.org/10.1007/s00170-020-05239-4CrossRef

11.

C. Li, H. Lei, Z. Zhang, X. Zhang, H. Zhou, P. Wang et al., Architecture Design of Periodic Truss-Lattice Cells for Additive Manufacturing, Addit. Manuf., 2020, 34, 101172. https://doi.org/10.1016/j.addma.2020.101172CrossRef

12.

T.E.L. Douglas, U. Hempel, J. Żydek, A. Vladescu, K. Pietryga, J.A.H. Kaeswurm et al., Pectin Coatings on Titanium Alloy Scaffolds Produced by Additive Manufacturing: Promotion of Human Bone Marrow Stromal Cell Proliferation, Mater. Lett., 2018, 227, p 225–228. https://doi.org/10.1016/j.matlet.2018.05.060CrossRef

13.

T. Niendorf, F. Brenne and M. Schaper, Lattice Structures Manufactured by SLM: On the Effect of Geometrical Dimensions on Microstructure Evolution During Processing, Metall. Mater. Trans. B Process. Metall. Mater. Process. Sci., 2014, 45, p 1181–1185. https://doi.org/10.1007/s11663-014-0086-zCrossRef

14.

K. Kadirgama, W.S.W. Harun, F. Tarlochan, M. Samykano, D. Ramasamy, M.Z. Azir et al., Statistical and Optimize of Lattice Structures with Selective Laser Melting (SLM) of Ti6AL4V Material, Int. J. Adv. Manuf. Technol., 2018, 97, p 495–510. https://doi.org/10.1007/s00170-018-1913-1CrossRef

15.

Q. Feng, Q. Tang, Y. Liu, R. Setchi, S. Soe, S. Ma et al., Quasi-Static Analysis of Mechanical Properties of Ti6Al4V Lattice Structures Manufactured Using Selective Laser Melting, Int. J. Adv. Manuf. Technol., 2018, 94, p 2301–2313. https://doi.org/10.1007/s00170-017-0932-7CrossRef

16.

S.F. Costa, F.M. Duarte and J.A. Covas, Estimation of Filament Temperature and Adhesion Development in Fused Deposition Techniques, J. Mater. Process. Technol., 2017, 245, p 167–179. https://doi.org/10.1016/j.jmatprotec.2017.02.026CrossRef

17.

O.A. Mohamed, S.H. Masood and J.L. Bhowmik, Optimization of Fused Deposition Modeling Process Parameters: A Review of Current Research and Future Prospects, Adv. Manuf., 2015, 3, p 42–53. https://doi.org/10.1007/s40436-014-0097-7CrossRef

18.

J. Nagendra and M.S.G. Prasad, FDM Process Parameter Optimization by Taguchi Technique for Augmenting the Mechanical Properties of Nylon-Aramid Composite Used as Filament Material, J. Inst. Eng. Ser. C, 2020, 101, p 313–322. https://doi.org/10.1007/s40032-019-00538-6CrossRef

19.

M. Samykano, S.K. Selvamani, K. Kadirgama, W.K. Ngui, G. Kanagaraj and K. Sudhakar, Mechanical Property of FDM Printed ABS: Influence of Printing Parameters, Int. J. Adv. Manuf. Technol., 2019, 102, p 2779–2796. https://doi.org/10.1007/s00170-019-03313-0CrossRef

20.

A. Chadha, M.I. Ul Haq, A. Raina, R.R. Singh, N.B. Penumarti and M.S. Bishnoi, Effect of Fused Deposition Modelling Process Parameters on Mechanical Properties of 3D Printed Parts, World J. Eng., 2019, 16, p 550–559. https://doi.org/10.1108/WJE-09-2018-0329CrossRef

21.

Dey A, Yodo N. A Systematic Survey of FDM Process Parameter Optimization and Their Influence on Part Characteristics. J. Manuf. Mater. Process. 3 (2019). https://doi.org/10.3390/jmmp3030064.

22.

A.K. Sood, R.K. Ohdar and S.S. Mahapatra, Experimental Investigation and Empirical Modelling of FDM Process for Compressive Strength Improvement, J. Adv. Res., 2012, 3, p 81–90. https://doi.org/10.1016/j.jare.2011.05.001CrossRef

23.

T. Nancharaiah, D.R. Raju and V.R. Raju, An Experimental Investigation on Surface Quality and Dimensional Accuracy of FDM Components, Int. J. Emerg. Technol., 2010, 1, p 106–111.

24.

Zaman UK uz, Boesch E, Siadat A, Rivette M, Baqai AA. Impact of Fused Deposition Modeling (FDM) Process Parameters on Strength of Built Parts Using Taguchi’s Design of Experiments. Int. J. Adv. Manuf. Technol.101:1215–26 (2019). https://doi.org/10.1007/s00170-018-3014-6.

25.

W. Wu, P. Geng, G. Li, D. Zhao, H. Zhang and J. Zhao, Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study Between PEEK and ABS, Materials (Basel), 2015, 8, p 5834–5846. https://doi.org/10.3390/ma8095271CrossRef

26.

S. Dev and R. Srivastava, Experimental Investigation and Optimization of FDM Process Parameters for Material and Mechanical Strength, Mater. Today Proc., 2019, 26, p 1995–1999. https://doi.org/10.1016/j.matpr.2020.02.435CrossRef

27.

C. Tang, J. Liu, Y. Yang, Y. Liu, S. Jiang and W. Hao, Effect of Process Parameters on Mechanical Properties of 3D Printed PLA Lattice Structures, Compos. Part C Open Access, 2020, 3, 100076. https://doi.org/10.1016/j.jcomc.2020.100076CrossRef

28.

N.A. Rosli, R. Hasan, and M.R. Alkahari. Effect of Process Parameters on the Geometrical Quality of ABS Polymer Lattice Structure, in Proceedings of the SAKURA Symposium on Mechanical Science Engineering 2017 2017, pp. 3–5.

29.

G. Dong, G. Wijaya, Y. Tang and Y.F. Zhao, Optimizing Process Parameters of Fused Deposition Modeling by Taguchi Method for the Fabrication of Lattice Structures, Addit. Manuf., 2018, 19, p 62–72. https://doi.org/10.1016/j.addma.2017.11.004CrossRef

30.

A. Haryńska, I. Gubanska, J. Kucinska-Lipka, H. Janik. Fabrication and Characterization of Flexible Medical-Grade TPU Filament for Fused Deposition Modeling 3DP Technology. Polymers (Basel) 2018;10. https://doi.org/10.3390/polym10121304.

31.

U. Kalsoom, P.N. Nesterenko and B. Paull, Recent Developments in 3D Printable Composite Materials, RSC Adv., 2016, 6, p 60355–60371. https://doi.org/10.1039/c6ra11334fCrossRef

32.

R.D. Farahani, M. Dubé and D. Therriault, Three-Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications, Adv. Mater., 2016, 28, p 5794–5821. https://doi.org/10.1002/adma.201506215CrossRef

33.

D. Abbas, D. Mohammad Othman, H. Basil Ali and C. Author, Effect of Infill Parameter on Compression Property in FDM Process, Int. J. Eng. Res. Appl., 2017, 7, p 16–19. https://doi.org/10.9790/9622-0710021619CrossRef

34.

Baich L, G M, H M. Impact of Infill Design on Mechanical Strength and Production Cost in Material Extrusion Based Additive Manufacturing 2016.

35.

D. Popescu, A. Zapciu, C. Amza, F. Baciu and R. Marinescu, FDM Process Parameters Influence Over the Mechanical Properties of Polymer Specimens: A Review, Polym. Test., 2018, 69, p 157–166. https://doi.org/10.1016/j.polymertesting.2018.05.020CrossRef

36.

J. Tkac, S. Samborski, K. Monkova and H. Debski, Analysis of Mechanical Properties of a Lattice Structure Produced with the Additive Technology, Compos. Struct., 2020, 242, 112138. https://doi.org/10.1016/j.compstruct.2020.112138CrossRef

37.

Nancharaiah T. Optimization of Process Parameters in FDM Process Using Design of Experiments. Int. J. Emerg. Technol. 2(1):100–2 (2011).

38.

S. Terekhina, I. Skornyakov, T. Tarasova and S. Egorov, Effects of the Infill Density on the Mechanical Properties of Nylon Specimens Made by Filament Fused Fabrication, Technologies, 2019, 7, p 57. https://doi.org/10.3390/technologies7030057CrossRef

39.

C. Camposeco-Negrete, Optimization of Printing Parameters in Fused Deposition Modeling for Improving Part Quality and Process Sustainability, Int. J. Adv. Manuf. Technol., 2020, 108, p 2131–2147. https://doi.org/10.1007/s00170-020-05555-9CrossRef

Titel: Effect of Fused Filament Fabrication Process Parameters on Compressive Strength of Thermoplastic Polyurethane and Polylactic Acid Lattice Structures
verfasst von: Nidhi Dixit
Prashant K. Jain
Publikationsdatum: 15.02.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 7/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-06664-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7/2022

Effect of Salinity, Total Dissolved Solids, Conductivity, and pH on Corrosion Behavior of Different Microstructures Made from High-Carbon Rail Steel

Effects of Sc Addition and Retrogression and Re-aging on Microstructure and Mechanical Properties of Al-8Zn-2Mg-2Cu-0.15Zr Alloy

The Effect of Homogenization Parameters on the Corrosion Rate of Mg-Al-Sn-Mn-La-Gd Alloys

Austenite Stability and Cryogenic Impact Toughness of a Lamellar Fe-Mn-Al-C Lightweight Structural Steel Subjected to Quenching and Tempering Process

Binder Jetting of Hydroxyapatite/Carboxymethyl Chitosan/Polyvinylpyrrolidone/Dextrin Composite: The Role of Polymeric Adhesive and Particle Size Distribution on Printability of Powders

Microstructural Stability and Mechanical Property of a Medium-Si 12%Cr Reduced Activation Ferritic/Martensitic Steel at High Temperatures

Premium Partner

Marktübersichten