Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
MTZ-Fachkongress

Antriebe und Energiesysteme von morgen


Austausch von Automobil- und Energiewirtschaft

Am 14./15. Mai geht es in Chemnitz um die Mobilitätswende durch Elektro- und Wasserstofffahrzeuge.
Erweiterte Suche
Anmelden
nach oben
Journal of Materials Engineering and Performance
Erschienen in: Journal of Materials Engineering and Performance 1/2023

21.06.2022 | Technical Article

Effect of Sintering Temperature on Microstructure, Mechanical, and Tribological Behavior of Aluminum-Based Composites Containing Double-Layered Al/CuFe Core-Shell Particulates

verfasst von: Rashid Ali, Fahad Ali, Aqib Zahoor, Rub Nawaz Shahid, Naeem ul Haq Tariq, Muhammad Yasir, Saad Nazir, Hasan Bin Awais

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 1/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

In this study, the effect of sintering temperature on microstructure, mechanical and tribological behavior of aluminum matrix composites (AMCs) reinforced with Al/CuFe double-layered core-shell particulates (DLCSP) was investigated. In the first step, galvanic replacement and electroless deposition methods were employed to synthesize DLCSP by depositing submicron layers of copper and iron on Al particles, respectively. In the next step, 20 vol. % of DLCSP were blended with Al powder followed by hot-pressing at 440 °C, 480 °C, and 520 °C to fabricate the AMCs. The distribution of reinforcement, microstructural changes and wear track morphology of the prepared AMCs were investigated using scanning electron microscopy (SEM) with built-in energy-dispersive spectroscopy (EDX) system. Moreover, the mechanical and tribological behavior of the composites was studied using hardness, compression strength, and coefficient of frictions (COF). The results indicated that an increase in sintering temperature results in improved hardness, compressive strength, and COF. Further, strength along with toughness was preserved in these specially tailored DLCSP-reinforced AMCs.
Vorheriger Artikel Effect of Long-Term Elevated Temperatures on Mechanical Properties of AlSi10Mg
Nächster Artikel Significantly Enhanced Strength of a Drawn Twinning-Induced Plasticity Steel Wire and its Deformation Twinning Dependency

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
A.A. Yaroshevsky, Abundances of Chemical Elements in the Earth’s Crust, Geochemistry Int., 2006, 44, p 48–55. CrossRef
2.
N.C. Andrews, Forging a Field: The Golden Age of Iron Biology, Blood, 2008, 112, p 219–230. CrossRef
3.
O.P. Abioye, C.A. Loto and O.S.I. Fayomi, Evaluation of Anti-biofouling Progresses in Marine Application, J. Bio- Tribo-Corrosion, 2019, 5, p 1–8. CrossRef
4.
B.C. Sousa, C.J. Massar, M.A. Gleason and D.L. Cote, On the Emergence of Antibacterial and Antiviral Copper Cold Spray Coatings, J. Biol. Eng., 2021, 15, p 1–15. CrossRef
5.
Y. Pan, X. He, S. Ren, M. Wu and X. Qu, High Thermal Conductivity of Diamond/Copper Composites Produced with Cu–ZrC Double-Layer Coated Diamond Particles, J. Mater. Sci., 2018, 53, p 8978–8988. CrossRef
6.
I.B. Gomes, M. Simões and L.C. Simões, Copper Surfaces in Biofilm Control, Nanomaterials, 2020, 10, p 2491. CrossRef
7.
P. Chen, H. Li, S. Hu, T. Zhou, Y. Yan and W. Pan, Copper-Coated TiN Nanofibers with High Electrical Conductivity: a New Advance in Conductive One-Dimensional Nanostructures, J. Mater. Chem. C, 2015, 3, p 7272–7276. CrossRef
8.
S.C. Liu et al., A Surface Energy Driven Dissolution Model for Immiscible Cu-Fe Alloy, J. Mol. Liq., 2018, 261, p 232–238. CrossRef
9.
S.K. Sahu and A. Navrotsky, Thermodynamics of Copper-Manganese and Copper-Iron Spinel Solid Solutions, J. Am. Ceram. Soc., 2017, 100, p 3684–3692. CrossRef
10.
B. Ma, J. Li, Z. Xu and Z. Peng, Fe-shell/Cu-Core Encapsulated Metallic Phase Change Materials Prepared by Aerodynamic Levitation Method, Appl. Energy, 2014, 132, p 568–574. CrossRef
11.
S.F. Zhou, J.B. Lei, Z. Xiong, J.B. Guo, Z.J. Gu and H.B. Pan, Effect of Fe Content on Microstructure and Mechanical Properties of Cu–Fe-Based Composite Coatings by Laser Induction Hybrid Rapid Cladding, Trans. Nonferrous Met. Soc. China, 2016, 26(12), p 3196–3204. CrossRef
12.
K. Uenishi, Y. Ogata, S. Iwatani, A. Adachi, T. Sato and K.F. Kobayashi, Laser Cladding of Fe-Cu Based Alloys on Aluminum, Solid State Phenom., 2007, 127, p 331–336. CrossRef
13.
C.V. Ugarteche et al., Effect of Microstructure on the Thermal Properties of Sintered Iron-Copper Composites, Mater. Res., 2015, 18, p 1176–1182. CrossRef
14.
E. Dislaki, J. Pokki, S. Pané, J. Sort and E. Pellicer, Fabrication of Sustainable Hydrophobic and Oleophilic Pseudo-Ordered Macroporous Fe–Cu Films with Tunable Composition and Pore Size via Electrodeposition Through Colloidal Templates, Appl. Mater. Today, 2018, 12, p 1–8. CrossRef
15.
Y. Wang, H. Zhao and G. Zhao, Iron-Copper Bimetallic Nanoparticles Embedded within Ordered Mesoporous Carbon as Effective and Stable Heterogeneous Fenton Catalyst for the Degradation of Organic Contaminants, Appl. Catal. B Environ., 2015, 164, p 396–406. CrossRef
16.
W.L. Wang, Y.H. Wu, L.H. Li, W. Zhai, X.M. Zhang and B. Wei, Liquid-Liquid Phase Separation of Freely Falling Undercooled Ternary Fe-Cu-Sn Alloy, Sci. Rep., 2015, 5, p 16335. CrossRef
17.
E. Dislaki, J. Sort and E. Pellicer, Parametric Aqueous Electrodeposition Study and Characterization of Fe–Cu Films, Electrochim. Acta, 2017, 231, p 739–748. CrossRef
18.
C.P. Wang, X.J. Liu, I. Ohnuma, R. Kainuma and K. Ishida, Formation of Immiscible Alloy Powders with Egg-Type Microstructure, Science, 2002, 297(5583), p 990–993. CrossRef
19.
T. Prabhakaran et al., Thermally Reduced Soft Magnetic CuFe Nanoparticles for High-Performance Electrical Devices, IEEE Trans. Magn., 2021, 57, p 2. CrossRef
20.
A. Munitz, A. Venkert, P. Landau, M.J. Kaufman and R. Abbaschian, Microstructure and Phase Selection in Supercooled Copper Alloys Exhibiting Metastable Liquid Miscibility Gaps, J. Mater. Sci., 2012, 47, p 7955–7970. CrossRef
21.
M. Rabiee, H. Mirzadeh and A. Ataie, Processing of Cu-Fe and Cu-Fe-SiC Nanocomposites by Mechanical Alloying, Adv. Powder Technol., 2017, 28, p 1882–1887. CrossRef
22.
Y. Chen et al., Microstructure and Strengthening Mechanisms in Cu/Fe Multilayers, Acta Mater., 2012, 60, p 6312–6321. CrossRef
23.
S. Zhao, S. Zhou, M. Xie, X. Dai, D. Chen and L.C. Zhang, Phase Separation and Enhanced Wear Resistance of Cu88Fe12 Immiscible Coating Prepared by Laser Cladding, J. Mater. Res. Technol., 2019, 8, p 2001–2010. CrossRef
24.
G.M. Chowla et al., Chemical Precipitation and Properties of Nanocrystalline Fe-Cu Alloy and Composite Powders, Nanostructured Mater., 1992, 1, p 361–368. CrossRef
25.
X. Zhang, T. Chen, S. Ma, H. Qin and J. Ma, Overcoming the Strength-Ductility Trade-off of an Aluminum Matrix Composite by Novel Core-Shell Structured Reinforcing Particulates, Compos. Part B, 2021, 206, p 108541. CrossRef
26.
W. Wu, B. Guo, Y. Xue, R. Shen, S. Ni and M. Song, Ni-AlxNiy Core-Shell Structured Particle Reinforced Al-based Composites Fabricated by In-situ Powder Metallurgy Technique, Mater. Chem. Phys., 2015, 160, p 352–358. CrossRef
27.
D. Yadav and R. Bauri, Development of Cu Particles and Cu core-Shell Particles Reinforced Al Composite, Mater. Sci. Technol., 2015, 31, p 494–500. CrossRef
28.
Y.S. Zhang et al., Core-Shell Structured Titanium-Nitrogen Alloys with High Strength, High Thermal Stability and Good Plasticity, Sci. Rep., 2017, 7, p 1–8.
29.
B. Guo, S. Ni, R. Shen and M. Song, Fabrication of Ti-Al3Ti Core-Shell Structured Particle Reinforced Al Based Composite with Promising Mechanical Properties, Mater. Sci. Eng. A, 2015, 639, p 269–273. CrossRef
30.
Y. Xue, R. Shen, S. Ni, M. Song and D. Xiao, Fabrication, Microstructure and Mechanical Properties of Al-Fe Intermetallic Particle Reinforced Al-based Composites, J. Alloys Compd., 2015, 618, p 537–544. CrossRef
31.
S.F. Shargh, A. Saadat, A. Najafi, M.R.K. Gharehshiran and G. Khalaj, Investigating the Effect of Post Weld Heat Treatment on Corrosion Properties of Explosive Bonded Interface of AA5083/AA1050/SS 321 Tubes, Mater Res Express, 2020, 7(3), p 036529. CrossRef
32.
M.R.K.G. Shiran, H. Bakhtiari, S.A.A.A. Mousavi, G. Khalaj and S.M. Mirhashemi, Effect of Stand-Off Distance on the Mechanical and Metallurgical Properties of Explosively Bonded 321 Austenitic Stainless Steel-1230 Aluminum Alloy Tubes, Mater Res, 2017, 20, p 291–302. CrossRef
33.
H. Pouraliakbar, G. Khalaj, M.R. Jandaghi, A. Fadaei, M.K. Ghareh-Shiran, S.H. Shim and S.I. Hong, “Three-layered SS321/AA1050/AA5083 Explosive Welds: Effect of PWHT on the Interface Evolution and its Mechanical Strength”’, Int J. Press. Vessel. Pip., 2020, 188, p 104216. CrossRef
34.
S. Ma, X. Zhang, T. Chen and X. Wang, Microstructure-Based Numerical Simulation of the Mechanical Properties and Fracture of a Ti-Al3Ti Core-Shell Structured Particulate Reinforced A356 Composite, Mater. Des., 2020, 191, p 108685. CrossRef
35.
T. Chen, L. Geng, H. Qin and M. Gao, Core-Shell-Structured Particle Reinforced A356 Matrix Composite Prepared by Powder-Thixoforming: Effect of Reheating Temperature, Materials (Basel), 2018, 11, p 1–20.
36.
T.J. Chen, H. Qin and X.Z. Zhang, Effects of Reheating Duration on the Microstructure and Tensile Properties of In situ Core–Shell-Structured Particle-Reinforced A356 Composites Fabricated via Powder Thixoforming, J. Mater. Sci., 2018, 53, p 2576–2593. CrossRef
37.
R. Ali, F. Ali, A. Zahoor, H.R. Nawaz, N.U. Haq et al., Effect of Sintering Path on the Microstructural and Mechanical Behavior of Aluminum Matrix Composite Reinforced with Pre-synthesized Al/Cu Core-shell Particles, J. Alloy. Compd., 2021, 889, p 161531. CrossRef
38.
R. Ali, F. Ali, A. Zahoor, H.R. Nawaz, N.U. Haq et al., Synthesis of Al/Cu Core–Shell Particles Through Optimization of Galvanic Replacement Method in Alkaline Solution, Int. J. Mater. Res., 2021, 112(6), p 439–447. CrossRef
39.
R. Ali, F. Ali, A. Zahoor, R.N. Shahid, N.U.H. Tariq, S. Ullah and H.B. Awais, A Taguchi Approach to Synthesise Al/Fe Core–Shell Composite Powders Through Electroless Deposition, Trans IMF, 2021, 99(5), p 265–273. CrossRef
40.
G.F. Huang, W.Q. Huang, L.L. Wang, Y. Meng, Z. Xie and B.S. Zou, Electrochemical Study of Electroless Deposition of Fe-P Alloys, Electrochim. Acta, 2006, 51, p 4471–4476. CrossRef
41.
D. Chu, J. Zhang, J. Yao, Y. Han and C. Wu, Cu−Al Interfacial Compounds and Formation Mechanism of Copper Cladding Aluminum Composites, Trans. Nonferrous Met. Soc. China, 2017, 27, p 2521–2528. CrossRef
42.
Y. Guo, G. Liu, H. Jin, Z. Shi and G. Qiao, Intermetallic Phase Formation in Diffusion-Bonded Cu/Al Laminates, J Mater Sci, 2011, 46(8), p 2467–2473. CrossRef
43.
F. Haidara, B. Duployer, D. Mangelinck and M. Record, In-situ Investigation of the Icosahedral Al–Cu–Fe Phase Formation in Thin Films, J. Alloys Compd., 2012, 534, p 47–51. CrossRef
44.
F. Ali, S. Scudino, M.S. Anwar, R.N. Shahid, V.C. Srivastava, V. Uhlenwinkel and J. Eckert, Al-Based Metal Matrix Composites Reinforced with Al–Cu–Fe Quasicrystalline Particles: Strengthening by Interfacial Reaction, J Alloys Compd, 2014, 607, p 274–279. CrossRef
45.
H. Parsamehr, Y.J. Lu, T.Y. Lin, A.P. Tsai and C.H. Lai, In-Situ Observation of Local Atomic Structure of Al-Cu-Fe Quasicrystal Formation, Sci. Rep., 2019, 9, p 1245. CrossRef
46.
Y.H. He, Y. Jiang, N.P. Xu, J. Zou, B.Y. Huang, C.T. Liu and P.K. Liaw, Fabrication of Ti–Al Micro/Nanometer-Sized Porous Alloys through the Kirkendall Effect, Adv Mater, 2007, 19(16), p 2102–2106. CrossRef
47.
A. Azarniya, A. Azarniya, A. Abdollah-zadeh, H.R. Madaah Hosseini and S. Ramakrishna, In Situ Hybrid Aluminum Matrix Composites: a Review of Phase Transformations and Mechanical Aspects, Adv. Eng. Mater., 2019, 21(7), p 1801269. CrossRef
48.
L. Lityńska-Dobrzyńska et al., Characterization of Aluminium Matrix Composites Reinforced by Al-Cu-Fe Quasicrystalline Particles, J. Alloys Compd., 2015, 643, p S114–S118. CrossRef
49.
F. Ali, S. Scudino, G. Liu, V.C. Srivastava, N.K. Mukhopadhyay, M.S. Khoshkhoo and J. Eckert, Modeling the Strengthening Effect of Al–Cu–Fe Quasicrystalline Particles in Al-Based Metal Matrix Composites, Journal of Alloys and Compounds, 2012, 536, p S130–S133. CrossRef
50.
S. Scudino, G. Liu, K.G. Prashanth, B. Bartusch, K.B. Surreddi, B.S. Murty and J. Eckert, Mechanical Properties of Al-Based Metal Matrix Composites Reinforced with Zr-Based Glassy Particles Produced by Powder Metallurgy, Acta Mater., 2009, 57, p 2029–2039. CrossRef
Metadaten
Titel
Effect of Sintering Temperature on Microstructure, Mechanical, and Tribological Behavior of Aluminum-Based Composites Containing Double-Layered Al/CuFe Core-Shell Particulates
verfasst von
Rashid Ali
Fahad Ali
Aqib Zahoor
Rub Nawaz Shahid
Naeem ul Haq Tariq
Muhammad Yasir
Saad Nazir
Hasan Bin Awais
Publikationsdatum
21.06.2022
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 1/2023
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-022-07069-9

Weitere Artikel der Ausgabe 1/2023

Journal of Materials Engineering and Performance 1/2023 Zur Ausgabe

Technical Article

Properties of Plasma Electrolytic Oxidation Coatings Doped with SnSO4 on AZ91D Magnesium Alloys

Technical Article

Effect of Sn Content on the Pore Structures of Porous Ni-Sn Alloys Produced by Reactive Synthesis Sintering Method

Technical Article

Wear Behavior of High-Speed Wheel and Rail Steels under Various Hardness Matching

Technical Article

Microstructure and Current-Carrying Tribological Properties of Electrobrush-Plated Sn-Graphene Composite Coating

Technical Article

Effects of Various Cross Sections on Elastoplastic Behavior of Fe Nanowires under Tension/Compression

Technical Article

Microstructure and Mechanical Properties of the Extruded Al-Cu-Mn-Sc-Zr Alloy during Single-Stage and Two-Stage Aging

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise