nach oben

Journal of Materials Engineering and Performance

Erschienen in:

21.06.2021

Effect of Sodium Tungstate on the Microstructure and Properties of Micro-Arc Oxidized Coatings Formed on 2A12 Aluminum Alloy

verfasst von: Huanyuan Yan, Wensheng Liu, Zhaoji Yu, Bing Liu, Chao Liu, Tao Wang, Yang Liu, Lei Wu, Yunzhu Ma

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 10/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In the current work, micro-arc oxidized coatings were fabricated on 2A12 aluminum alloy with different concentrations of Na₂WO₄. The microstructure, mechanical properties and wear properties of the micro-arc oxidation (MAO) coatings formed on 2A12 aluminum alloy were investigated. The results show that the thickness and the surface roughness of the coating increased with the increase in Na₂WO₄ concentration. The thickness increased from 21 μm without sodium tungstate to 43.5 μm with 16 g·L⁻¹ sodium tungstate, and the roughness from 3.2 to 5.5 μm. The hardness and wear resistance of the MAO coatings were also significantly influenced by the Na₂WO₄ concentration. During MAO, Na₂WO₄ as a passivator and WO₄ ions participated in the coating reaction, which can promote the phase transition from amorphous alumina to γ-Al₂O₃ phase. The mechanism of action of sodium tungstate in the oxidation process was also elucidated.

Vorheriger Artikel Microstructure, Tensile Properties, and Wear Resistance of In Situ TiB2/6061 Composites Prepared by High Energy Ball Milling and Stir Casting

Nächster Artikel Experimental Investigation on Wire Electric Discharge Machining of Biodegradable AZ91 Mg Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Y. Guangliang, L. Xianyi, B. Yizhen, C. Haifeng and J. Zengsun, The Effects of Current Density on the Phase Composition and Microstructure Properties of Micro-Arc Oxidation Coating, J. Alloys Compd., 2002, 345(1–2), p 196–200. https://doi.org/10.1016/S0925-8388(02)00289-XCrossRef

J.H. Wang, M.H. Du, F.Z. Han and J. Yang, Effects of the Ratio of Anodic and Cathodic Currents on the Characteristics of Micro-Arc Oxidation Ceramic Coatings on Al Alloys, Appl. Surf. Sci., 2014, 292, p 658–664. https://doi.org/10.1016/j.apsusc.2013.12.028CrossRef

M.A. Ezazi, M.M. Quazi, E. Zalnezhad and A.A.D. Sarhan, Enhancing the Tribo-Mechanical Properties of Aerospace AL7075-T6 by Magnetron-Sputtered Ti/TiN, Cr/CrN & TiCr/TiCrN Thin Film Ceramic Coatings, Ceram. Int., 2014, 40(10), p 15603–15615. https://doi.org/10.1016/j.ceramint.2014.07.067CrossRef

X.J. Li, L.L. He, Y.S. Li, Q. Yang and A. Hirose, TEM Interfacial Characterization of CVD Diamond Film Grown on Al Inter-Layered Steel Substrate, Diam. Relat. Mater., 2014, 50, p 103–109. https://doi.org/10.1016/j.diamond.2014.09.006CrossRef

S. Nezamdoust and D. Seifzadeha, Habibi-Yangjeh, Nanodiamond Incorporated Sol–Gel Coating for Corrosion Protection of Magnesium Alloy, Trans. Nonferrous Met. Soc. China., 2020, 30(6), p 1535–1549. https://doi.org/10.1016/S1003-6326(20)65317-1CrossRef

Y. Reda, A.M. El-Shamy and A.K. Eessaa, Effect of Hydrogen Embrittlement on the Microstructures of Electroplated Steel Alloy 4130, Ain Shams Eng. J., 2018, 9(4), p 2973–2982. https://doi.org/10.1016/j.asej.2018.08.004CrossRef

T. Brylewski, A. Gil, A. Rakowska et al., Improving the Physicochemical Properties of Fe-25Cr Ferritic Steel for SOFC Interconnects Via Y-Implantation and Y₂O₃-Deposition, Oxid. Met., 2013, 80, p 83–111. https://doi.org/10.1007/s11085-012-9345-zCrossRef

MS Dorofeeva, TA Gubaidulina, VP Sergeev and TI Dorofeeva, inffluence of ion beam implantation on the corrosion properties of stainless steel, 2020 7th international congress on energy fluxes and radiation effects (EFRE), (2020) 766-768 https://doi.org/10.1109/EFRE47760.2020.9242062.

A. Kruk, M. Stygar, T. Brylewisk and K. Przybylski, Mn_1.5Co_1.5O₄ Spinel Conducting Coatings on al453 Ferritic Steel with Regard to their Application as Interconnects in It-Sofc, Arch. Metall. Mater., 2013, 58(2), p 377–381.CrossRef

10.

M.J. Tsai, C.L. Chu and S. Lee, La_0.6Sr_0.4Co_0.2Fe_0.8O₃ Protective Coatings for Solid Oxide Fuel Cell Interconnect Deposited by Screen Printing, J. Alloys Compd., 2010, 489(2), p 576–581. https://doi.org/10.1016/j.jallcom.2009.09.114CrossRef

11.

J.A. Picas, A. Forn, R. Rilla and E. Martín, HVOF Thermal Sprayed Coatings on Aluminium Alloys and Aluminium Matrix Composites, Surf. Coat. Technol., 2005, 200(1), p 1178–1181. https://doi.org/10.1016/j.surfcoat.2005.02.124CrossRef

12.

Y. Chi, Gu. Guochao, Yu. Huijun and C. Chen, Laser Surface Alloying on Aluminum and Its Alloys: A Review, Opt. Laser Eng., 2018, 100, p 23–37. https://doi.org/10.1016/j.optlaseng.2017.07.006CrossRef

13.

A.A.D. Sarhan, E. Zalnezhad and M. Hamdi, The Influence of Higher Surface Hardness on Fretting Fatigue Life of Hard Anodized Aerospace AL7075-T6 Alloy, Mater. Sci. Eng. A., 2013, 560, p 377–387. https://doi.org/10.1016/j.msea.2012.09.082CrossRef

14.

L.-C. Zhang, L.-Y. Chen and L. Wang, Surface Modification of Titanium and Titanium Alloys: Technologies, Developments and Future Interests, Adv. Eng. Mater., 2020, 22(5), p 1901258. https://doi.org/10.1002/adem.201901258CrossRef

15.

M.M. Quazi, M. Ishak, M.A. Fazal, A. Arslan, S. Rubaiee, M.H. Abdullah Qaban, T.S. Aiman, M.M. Ali and S.M. Manladan, Current research and development status of dissimilar materials laser welding of titanium and its alloys, Opt. Laser Technol., 2020, 126, 106090CrossRef

16.

M. Momcilovic, J. Petrovic, J. Ciganovic et al., Laser-Induced Plasma as a Method for the Metallic Materials Hardness Estimation: An Alternative Approach, Plasma Chem. Plasma Process., 2020, 40(2), p 499–510. https://doi.org/10.1007/s11090-020-10063-5CrossRef

17.

Gu. Wei-Chao, G.-H. Lv, H. Chen, G.-L. Chen, W.-R. Feng and S.-Z. Yang, Characterization of Ceramic Coatings Produced by Plasma Electrolytic Oxidation of Aluminum Alloy, Mater. Sci. Eng. A., 2007, 447(1–2), p 158–162. https://doi.org/10.1016/j.msea.2006.09.004CrossRef

18.

H Yan Ding, Z Dong Dai, SC Skuiry, D Hui, Corrosion Wear Behaviors of Micro-arc Oxidation Coating of Al₂O₃ on 2024 Al in Different Aqueous Environments at Fretting Contact, Tribol. Int. 43(5-6) (2010) 868-875 https://doi.org/10.1016/j.triboint.2009.12. 022.

19.

M. Sandhyarani, M. Ashfaq, T. Arunnellaiappan, M.P. Selvan, S. Subramanian and N. Rameshbabu, Effect of Electrical Parameters on Morphology and In-Vitro Corrosion Resistance of Plasma Electrolytic Oxidized Films Formed on Zirconium, Surf. Coat. Technol., 2015, 269, p 286–294. https://doi.org/10.1016/j.surfcoat.2015.03.001CrossRef

20.

S.C. Yeh, D.S. Tsai, J.M. Wang and C.C. Chou, Coloration of the Aluminum Alloy Surface with Dye Emulsions While Growing a Plasma Electrolytic Oxide Layer, Surf. Coat. Technol., 2016, 287, p 61–66. https://doi.org/10.1016/j.surfcoat.2015.12.091CrossRef

21.

Xu. Piao Zhong-Yu, W.-D. Bin-Shi and Yu. Xiao-Xiao, Rolling Contact Fatigue Behavior of Thermal-Sprayed Coating: A review, Crit. Rev. Solid State., 2020, 45(6), p 429–456. https://doi.org/10.1080/10408436.2019.1671798CrossRef

22.

B. Zheng, Y. Zhao, W. Xue et al., Microbial influenced corrosion behavior of micro-arc oxidation coating on AA2024, Surf. Coat. Technol., 2013, 216(3), p 100–105. https://doi.org/10.1016/j.surfcoat.2012.11.031CrossRef

23.

J.H. Wang, M.H. Du, F.Z. Han et al., Effects of the Ratio of Anodic and Cathodic Currents on the Characteristics of Micro-arc Oxidation Ceramic Coatings on Al Alloys, Appl. Surf. Sci., 2014, 292(4), p 658–664. https://doi.org/10.1016/j.apsusc.2013.12.028CrossRef

24.

Rajiv Asthana, Ashok Kumar, Narendra B. Dahotre, 5-Coatings and Surface Engineering, in: Rajiv Asthana, Ashok Kumar, Narendra B. Dahotre, Materials Processing and Manufacturing Science, Academic Press, (2006) 313 https://doi.org/10.1016/B978- 075067716-5/50007-8.

25.

H.X. Li, V.S. Rudnev, X.H. Zheng, T.P. Yarovaya and R.G. Song, Characterization of Al₂O₃ Ceramic Coatings on 6063 Aluminum Alloy Prepared in Borate Electrolytes by Micro-Arc Oxidation, J. Alloys Compd., 2008, 462(1–2), p 99–102. https://doi.org/10.1016/j.jallcom.2007.08.046CrossRef

26.

I. Shchedrina, A.G. Rakoch, G. Henrion and J. Martin, Non-Destructive Methods to Control the Properties of MAO Coatings on the Surface of 2024 Aluminium Alloy, Surf. Coat. Technol., 2014, 238, p 27–44. https://doi.org/10.1016/j.surfcoat.2013.10.032CrossRef

27.

X. Shi-Gang, S. Li-Xin, Z. Rong-Gen and H. Xing-Fang, Properties of Aluminium Oxide Coating on Aluminium Alloy Produced by Micro-Arc Oxidation, Surf. Coat. Technol., 2005, 199(2–3), p 184–188. https://doi.org/10.1016/j.surfcoat.2004.11.044CrossRef

28.

X. Nie, A. Leyland, H.W. Song, A.L. Yerokhin, S.J. Dowey and A. Matthews, Thickness Effects on the Mechanical Properties of Micro-Arc Discharge Oxide Coatings on Aluminium Alloys, Surf. Coat. Technol., 1999, 116–119, p 1055–1060. https://doi.org/10.1016/S0257-8972(99)00089-4CrossRef

29.

S. Xin, L. Song, R. Zhao and X. Hu, Influence of Cathodic Current on Composition, Structure and Properties of Al₂O₃ Coatings on Aluminum Alloy Prepared by Micro-Arc Oxidation Process, Thin Solid Films, 2006, 515(1), p 326–332. https://doi.org/10.1016/j.tsf.2005.12.087CrossRef

30.

J Tian, Z Luo, S Qi, X Sun, Structure and Anti-Wear Behavior of Micro-Arc Oxidized Coatings on Aluminum Alloy, Surf. Coat. Technol. 154(1) (2002) 1-7. 1016/S0257-8972(01)01671-1

31.

H.X. Li, R.G. Song and Z.G. Ji, Effects of Nano-Additive TiO₂ on Performance of Micro Arc Oxidation Coatings Formed on 6063 Aluminum Alloy, Trans. Nonferrous Met. Soc. China (English Ed), 2013, 23(2), p 406–411. https://doi.org/10.1016/S1003-6326(13)62477-2CrossRef

32.

W. Yang, B. Jiang, A. Wang and H. Shi, Effect Of Negatively Charged Ions on the Formation of Micro-Arc Oxidation Coating on 2024 Aluminium Alloy, Mater. Sci. Technol., 2012, 28(8), p 707–712. https://doi.org/10.1016/S1005-0302(12)60119-4CrossRef

33.

C. Wang, D. Zhang and Y. Jiang, Growth Process and Wear Resistance for Ceramic Coatings Formed on Al-Cu-Mg Alloy by Micro-Arc Oxidation, Surf. Sci., 2006, 253(2), p 674–678. https://doi.org/10.1016/j.apsusc.2005.12.156CrossRef

34.

Y. Li, Y. Zhao, H. Zhao and G. Xing, Effects of Na₂WO₄ and SiC_p on Micro-Arc Oxidation Coatings on 2A12 Aluminum Alloy, Special Cast. Nonferrous Alloy., 2011, 31(2), p 187–190. https://doi.org/10.3870/tzzz.2011.02.029CrossRef

35.

S.V. Gnedenkov, O.A. Khrisanfova, A.G. Zavidnaya, S.L. Sinebrukhov, P.S. Gordienko, S. Iwatsubo and A. Matsui, Composition and Adhesion of Protective Coatings on Aluminum, Surf. Coat. Technol., 2001, 145(1–3), p 146–151. https://doi.org/10.1016/S0257-8972(01)01307-XCrossRef

36.

Xuefeng Liu, Gang Liu, Jianxin Xie, 2012 Preliminary Study on Preparation of Black Ceramic Coating Formed on Magnesium Alloy by Micro-arc Oxidation in Carbon Black Pigment-contained Electrolyte, Procedia Eng. 36 ,10.1016/j.proeng.2012.03.039.

37.

X.D. Chen, Q.Z. Cai and L.S. Yin, Effects of Na₂WO₄ Additive on Properties of Plasma Electrolytic Oxidation Coatings on 6061 Al Alloy, Adv. Mater. Res., 2012, 550(553), p 1969–1975.CrossRef

38.

C.C. Tseng, J.L. Lee, T.H. Kuo, S.N. Kuo, K.H. Tseng, The influence of sodium tungstate concentration and anodizing conditions on micro arc oxidation (MAO) coatings for aluminum alloy, Surf. Coat. Technol. 206(16) (2012) 3437-3443, 1016/j.surfcoat.2012.02.002.

39.

M.M.S. Al Bosta, K.J. Ma, Influence of electrolyte temperature on properties and infrared emissivity of MAO ceramic coating on 6061 aluminum alloy, Infrared Phys. Technol. 67 (2014) 63-72. http://doi.org/https://doi.org/10.1016/j.infrared.2014.07.009.

40.

R.O. Hussein, X. Nie et al., Spectroscopic Study of Electrolytic Plasma and Discharging Behaviour during the Plasma Electrolytic Oxidation (PEO) Process, J. Phys. D: Appl. Phys., 2010, 43(10), 105203. https://doi.org/10.1088/0022-3727/43/10/105203CrossRef

41.

M.M.S. Al Bosta, K.J. Ma, H.H. Chien, The effect of MAO processing time on surface properties and low temperature infrared emissivity of ceramic coating on aluminium 6061 alloy, Infrared Phys. Technol. 60 (2013) 323-334. https://doi.org/10.1016/j.infrared. 2013.06.006.

42.

B.L. Jiang, R.B. Zhao, G. Liang, J.M. Li and F. Yuan, Effect of Na₂WO₄ on Properties of Micro Arc Oxidation (MAO) Ceramic Coatings and Wear Resistance of Aluminum Alloy, Mater. Rev., 2006, 20(9), p 155–157. https://doi.org/10.1061/(ASCE)0887-381X(2006)20:1(20)CrossRef

43.

Z. Lin, H. Yu, S. He et al., Effect of Na₂WO₄ on Growth Process and Corrosion Resistance of Micro-Arc Oxidation Coatings on 2A12 Aluminum Alloys in CH₃COONa Electrolyte, J. Mater. Eng. Perform., 2016, 25, p 297–303. https://doi.org/10.1007/s11665-015-1803-8CrossRef

44.

Zhou Y F. Aluminium alloy micro-arc oxide film growth mechanism and performance research, Nanchang Hangkong University, Jiangxi, China, (2016) 8-15. 10.7666/d.D01011814.

45.

C. Wang, D. Zhang and Y. Jiang, Growth Process and Wear Resistance for Ceramic Coatings Formed on Al-Cu-Mg Alloy By Micro-Arc Oxidation, Appl. Surf. Sci., 2006, 253(2), p 674–678. https://doi.org/10.1016/j.apsusc.2005.12.156CrossRef

46.

T. Zhan, W. Tu, Y. Cheng, J. Han, B. Su and Y. Cheng, The Synthesis of Micro and Nano WO₃ Powders Under the Sparks of Plasma Electrolytic Oxidation of Al in a Tungstate Electrolyte, Ceram. Int., 2018, 44(9), p 10402–10411. https://doi.org/10.1016/j.ceramint.2018.03.054CrossRef

47.

JIANG Yong-feng, LI Jun-ming, JIANG Bai-ling, et a1. Analysis of Formed Factors of Micro-arc Oxdation Ceramic Coating, Surf. Technol. 30(2) (2001) 37-39. http://lib.cqvip. com/Qikan/Article/Detail?id=5111612.

48.

H.Y. Zheng, Y.K. Wang, B.S. Li and G.R. Han, The Effects of Na₂WO₄ Concentration on the Properties of Microarc Oxidation Coatings on Aluminum Alloy, Mater. Letters, 2005, 59(2–3), p 139–142. https://doi.org/10.1016/j.matlet.2004.06.025CrossRef

Titel: Effect of Sodium Tungstate on the Microstructure and Properties of Micro-Arc Oxidized Coatings Formed on 2A12 Aluminum Alloy
verfasst von: Huanyuan Yan
Wensheng Liu
Zhaoji Yu
Bing Liu
Chao Liu
Tao Wang
Yang Liu
Lei Wu
Yunzhu Ma
Publikationsdatum: 21.06.2021
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 10/2021
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-05967-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 10/2021

Corrosion of Electrodeposited Ni Coatings of Agricultural Machinery by Farming Fertilizers

Friction and Wear Behavior of C17200 Copper-Beryllium Alloy in Dry and Wet Environments

Exploration of the Influence Mechanism of La Doping on the Arc Erosion Resistance of Ag/SnO2 Contact Materials by a Laser-Simulated Arc

Improvement of Corrosion and Wear Resistance of Ni-W Coatings by Embedding Graphene Oxide Modified by Nano-Al2O3

Microstructure and Magnetron Sputtering Properties of W/Re Alloy Targets Fabricated by Vacuum Sintering

Microstructure, Tensile Properties, and Wear Resistance of In Situ TiB2/6061 Composites Prepared by High Energy Ball Milling and Stir Casting

Premium Partner

Marktübersichten