Experimental Mechanics

On the Cover: Analysis of Damage and Failure in Anisotropic Ductile Metals Based on Biaxial Experiments with the H-Specimen

Analysis of Damage and Failure in Anisotropic Ductile Metals Based on Biaxial Experiments with the H-Specimen

M. Brünig, S. Koirala, S. Gerke

Experimental Quantification and Validation of Modal Properties of Geometrically Nonlinear Structures by Using Response-Controlled Stepped-Sine Testing

T. Karaağaçlı, H. N. Özgüven

The Symmpact: A Direct-Impact Hopkinson Bar Setup Suitable for Investigating Dynamic Equilibrium in Low-Impedance Materials

P. Jakkula, G. C. Ganzenmüller, S. Beisel, P. Rüthnick, S. Hiermaier

Comparison Between Surface and Near-Surface Residual Stress Measurement Techniques Using a Standard Four-Point-Bend Specimen

S. Rahimi, I. Violatos

Improved Stress Estimation with Machine Learning and Ultrasonic Guided Waves

C. D. Villares Holguin, H. V. Hultmann Ayala, A. C. Kubrusly

Modal Analysis Using a Virtual Speckle Pattern Based Digital Image Correlation Method: An Application for an Artificial Flapping Wing

N. V. Doan, V. T. Le, H. C. Park, N. S. Goo

Adaptive Rotated Gaussian Weighted Digital Image Correlation (RGW-DIC) for Heterogeneous Deformation Measurement

X. Ye, J. Zhao

An Experimental Methodological Approach for Obtaining Viscoelastic Poisson’s Ratio of Elastomers from Creep Strain DIC-Based Measurements

L. I. Farfan-Cabrera, J. B. Pascual-Francisco

Dynamics of Miniature and High-Compliance Structures: Experimental Characterization and Modeling

S. Shekhar, O. Burak Ozdoganlar

Improvement of the Arcan Setup for the Investigation of Thin Sheet Behavior Under Shear Loading

A. Zaplatić, Z. Tomičević, D. Čakmak, F. Hild

Damage Quantification via Digital Volume Correlation with Heterogeneous Mechanical Regularization: Application to an In situ Meso-Flexural Test on Mortar

A. Tsitova, F. Bernachy-Barbe, B. Bary, S. A. Dandachli, C. Bourcier, B. Smaniotto, F. Hild

Universal Calibration Constants for Strain Gauge Hole-Drilling Residual Stress Measurements

G. S. Schajer

Nano-Indentation Hardness and Strain Hardening of Silicon, Sodium Chloride and Tungsten Crystals

R. W. Armstrong, W. L. Elban, S. M. Walley

Correction to: Hard‑material Adhesion: Which Scales of Roughness Matter?

L. A. Thimons, A. Gujrati, A. Sanner, L. Pastewka, T. D. B. Jacobs