nach oben

Experimental Mechanics

Erschienen in:

01.01.2014

Impact Behaviour of GLAREs with MWCNT Modified Epoxy Resins

verfasst von: H. Zhang, S. W. Gn, J. An, Y. Xiang, J. L. Yang

Erschienen in: Experimental Mechanics | Ausgabe 1/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, GLAREs (Glass Reinforced Aluminum Laminates) with 3/2 configuration were fabricated in-house with multi-walled carbon nanotubes (MWCNTs) modified epoxy resins. Uniform dispersion of MWCNTs in epoxy resin was achieved via a two-step dispersion method with concentration up to 2.0 wt%. The influence of MWCNTs on the flexural property and the impact performance of GLAREs was investigated through the three-point bending and drop weight Dynatup impact testings, respectively. The incorporation of MWCNTs into epoxy evidently improved the flexural strength and modulus. In comparison with pure epoxy bonded GLARE, the modified GLAREs generally showed improvement of impact resistance. The improvement was more obvious at low concentration of MWCNT due to better dispersion of nanotubes in the resin and reasonable wettability of glass fibres and aluminium to the modified resin. Diversified failure mechanisms including plastic deformation and rupture of metal layers, breakage of fibres and matrix, delamination between composite and metal layers, and delamination between composite plies were observed. In addition, debonding, pull-out, and bridging effects of carbon nanotubes were observed, which proved the contribution of MWCNTs to the improved impact resistance of the modified GLAREs.

Vorheriger Artikel Identification of Cracking Mechanisms in Scaled FRP Reinforced Concrete Beams using Acoustic Emission

Nächster Artikel Noise Stimuli Improve the Accuracy of Target Aiming: Possible Involvement of Noise-Enhanced Balance Control

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vogelesang LB, Vlot A (2000) Development of fibre metal laminates for advanced aerospace structures. J Mater Process Tech 103(1):1–5CrossRef

Vlot A (2001) Glare: History of the development of a new aircraft material. Kluwer Academic Publishers, Dordrecht

Alderliesten RC, Homan JJ (2006) Fatigue and damage tolerance issues of Glare in aircraft structures. Int J Fatigue 28(10):1116–1123CrossRefMATH

Vlot A, Vogelesang LB, de Vries TJ (1999) Towards application of fibre metal laminates in large aircraft. Aircr Eng Aerosp Tec 71(6):558–570CrossRef

Wu GC, Yang JM (2005) The mechanical behavior of GLARE laminates for aircraft structures. JOM 57(1):72–79CrossRef

de Vries TJ, Vlot A, Hashagen F (1999) Delamination behavior of spliced fiber metal laminates. Part 1. Experimental results. Compos Struct 46(2):131–145CrossRef

Vlot A (1993) Impact properties of fiber metal laminates. Compos Eng 3(10):911–927CrossRef

Lawcock G, Ye L, Mai YW, Sun CT (1997) The effect of adhesive bonding between aluminum and composite prepreg on the mechanical properties of carbon-fiber-reinforced metal laminates. Compos Sci Technol 57(1):35–45CrossRef

Lawcock GD, Ye L, Mai YW, Sun CT (1997) Effects of fibre/matrix adhesion on carbon-fibre-reinforced metal laminates - II. Impact behaviour. Compos Sci Technol 57(12):1621–1628CrossRef

10.

Vlot A, Krull M (1997) Impact damage resistance of various fibre metal laminates. J Phys IV 7(C3):1045–1050

11.

Yaghoubi AS, Liu Y, Liaw B (2012) Stacking sequence and geometrical effects on low-velocity impact behaviors of GLARE 5 (3/2) fiber-metal laminates. J Thermoplast Compos 25(2):223–247CrossRef

12.

Moriniere FD, Alderliesten RC, Benedictus R (2012) Development of fibre-metal laminates for improved impact performance. Eur Phys J-Spec Top 206(1):79–88CrossRef

13.

Suhr J, Koratkar NA (2008) Energy dissipation in carbon nanotube composites: a review. J Mater Sci 43(13):4370–4382CrossRef

14.

Koratkar NA, Suhr J, Joshi A, Kane RS, Schadler LS, Ajayan PM, Bartolucci S (2005) Characterizing energy dissipation in single-walled carbon nanotube polycarbonate composites. Appl Phys Lett 87(6):063102CrossRef

15.

Alhazov D, Zussman E (2012) Study of the energy absorption capabilities of laminated glass using carbon nanotubes. Compos Sci Technol 72(6):681–687CrossRef

16.

Tang LC, Zhang H, Wu XP, Zhang Z (2011) A novel failure analysis of multi-walled carbon nanotubes in epoxy matrix. Polymer 52(9):2070–2074CrossRefMathSciNet

17.

ASTM D2651–01 (2008) Standard guide for preparation of metal surfaces for adhesive bonding. ASTM international, Pennsylvania

18.

Prolongo SG, Urena A (2009) Effect of surface pre-treatment on the adhesive strength of epoxy-aluminium joints. Int J Adhes Adhes 29(1):23–31CrossRef

19.

Caprino G, Spataro G, Del Luongo S (2004) Low-velocity impact behaviour of fibreglass-aluminium laminates. Compos Part A-Appl S 35(5):605–616CrossRef

20.

Zhai LL, Ling G, Wang YW (2008) Effect of nano-Al2O3 on adhesion strength of epoxy adhesive and steel. Int J Adhes Adhes 28(1–2):23–28CrossRef

21.

Meguid SA, Sun Y (2004) On the tensile and shear strength of nano-reinforced composite interfaces. Mater Design 25(4):289–296CrossRef

22.

Dorigato A, Morandi S, Pegoretti A (2012) Effect of nanoclay addition on the fiber/matrix adhesion in epoxy/glass composites. J Compos Mater 46(12):1439–1451CrossRef

23.

Xu Y, Van Hoa S (2008) Mechanical properties of carbon fiber reinforced epoxy/clay nanocomposites. Compos Sci Technol 68(3–4):854–861CrossRef

24.

Vlasveld DPN, Daud W, Bersee HEN, Picken SJ (2007) Continuous fibre composites with a nanocomposite matrix: improvement of flexural and compressive strength at elevated temperatures. Compos Part A-Appl S 38(3):730–738CrossRef

25.

Ogasawara T, Ishida Y, Ishikawa T (2004) Properties of vapor grown carbon nano fiber/phenylethynyl terminated polyimide composite. Adv Compos Mater 13(3–4):215–226CrossRef

26.

Prolongo SG, Gude MR, Urena A (2010) Rheological behaviour of nanoreinforced epoxy adhesives of low electrical resistivity for joining carbon fiber/epoxy laminates. J Adhes Sci Technol 24(6):1097–1112CrossRef

27.

Qian D, Dickey EC, Andrews R, Rantell T (2000) Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites. Appl Phys Lett 76(20):2868–2870CrossRef

28.

Liu TX, Phang IY, Shen L, Chow SY, Zhang WD (2004) Morphology and mechanical properties of multiwalled carbon nanotubes reinforced nylon-6 composites. Macromolecules 37(19):7214–7222CrossRef

29.

Thostenson ET, Ren ZF, Chou TW (2001) Advances in the science and technology of carbon nanotubes and their composites: a review. Compos Sci Technol 61(13):1899–1912CrossRef

30.

Hsiao KT, Alms J, Advani SG (2003) Use of epoxy/multiwalled carbon nanotubes as adhesives to join graphite fibre reinforced polymer composites. Nanotechnology 14(7):791–793CrossRef

31.

Gojny FH, Wichmann MHG, Fiedler B, Bauhofer W, Schulte K (2005) Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites. Compos Part A-Appl S 36(11):1525–1535CrossRef

32.

Fereidoon A, Kordani N, Rostamiyan Y, Ganji DD, Ahangari MG (2010) Effect of carbon nanotubes on adhesion strength of e-glass/epoxy composites and alloy aluminium surface. World Appl Sci J 9(2):204–210

33.

Vlot A (1996) Impact loading on fibre metal laminates. Int J Impact Eng 18(3):291–307CrossRef

34.

Sadighi M, Alderliesten RC, Benedictus R (2012) Impact resistance of fiber-metal laminates: a review. Int J Impact Eng 49:77–90CrossRef

35.

Liu Y, Liaw B (2004) Drop-weight impact on fiber-metal laminates using various indenters. In SEM X International Congress and Exposition on Experimental and Applied Mechanics. Costa Mesa, CA

36.

Cortes P, Cantwell WJ (2007) The impact properties of high-temperature fiber-metal laminates. J Compos Mater 41(5):613–632CrossRef

Titel: Impact Behaviour of GLAREs with MWCNT Modified Epoxy Resins
verfasst von: H. Zhang
S. W. Gn
J. An
Y. Xiang
J. L. Yang
Publikationsdatum: 01.01.2014
Verlag: Springer US
Erschienen in: Experimental Mechanics / Ausgabe 1/2014
Print ISSN: 0014-4851
Elektronische ISSN: 1741-2765
DOI: https://doi.org/10.1007/s11340-013-9724-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2014

Investigation of Near-Surface Mechanical Properties of Materials Using Atomic Force Microscopy

Multi-Scale Experiments and Interfacial Mechanical Modeling of Carbon Nanotube Fiber

Identification of Cracking Mechanisms in Scaled FRP Reinforced Concrete Beams using Acoustic Emission

Role of Second Phase Powders on Microstructural Evolution During Sintering

Fabricating Parameters Optimization of High Frequency Grating by Multi-scanning Electron Beam Method

Investigation of Impact Response of Composites with Projection Moiré Enhancement

Premium Partner

Marktübersichten