nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

30.10.2021 | ORIGINAL ARTICLE

Impact of electromagnetic stirring on the gas metal arc welding of an MAR-M247 superalloy

verfasst von: Tzeng Yu-Chih, Cheng-Yu Lu, Ren-Yu Chen

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 1-2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, the impact of electromagnetic stirring (EMS) on the gas metal arc welding (GTAW) of an MAR-M247 superalloy was investigated. Results revealed that, without electromagnetic stirring, it was easy for carbides in the heat-affected zone (HAZ) of the weld bead to liquefy during welding, leading to weld bead cracks. Electromagnetic stirring refined the grains in the HAZ and the weld bead, leading to grain strengthening and subsequently resulting in the effective improvement in the hardness of the weld bead. In addition, electromagnetic stirring significantly facilitated the formation of the weld bead by the removal of large inclusions which in turn effectively improved crack resistance of the joint. It also accelerated the floating up of gas holes thereby reducing the generation of porosity.

Vorheriger Artikel Process optimization and mechanism analysis on electropulse-assisted incremental forming of AZ31B magnesium alloy sheet

Nächster Artikel Fabrication of multi-functional Ni–Ti alloys by laser powder bed fusion

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Morinaga M, Yukawa N, Adachi H, Ezaki H (1984) New PHACOMP and its applications to alloy design. Superalloys 1984:523–532. https://doi.org/10.7449/1984/Superalloys_1984_523_532CrossRef

Kvapilova M, Dvorak J, Kral P, Hrbacek K, Sklenicka V (2019) Creep behaviour and life assessment of a cast nickel–base superalloy MAR–M247. High Temp Mater Processes (London) 38(2019):590–600. https://doi.org/10.1515/htmp-2019-0006CrossRef

Azevedo e Silva PRS, Baldan R, Nunes CA, Coelho GC, Costa AMdS (2013) Solution heat-treatment of Nb-modified MAR-M247 superalloy. Mater Charact 75:214–219. https://doi.org/10.1016/j.matchar.2012.11.006CrossRef

Whitesell HS, Overfelt RA (2001) Influence of solidification variables on the microstructure, macrosegregation, and porosity of directionally solidified Mar-M247. Mater Sci Eng A 318(1–2):264–276. https://doi.org/10.1016/s0921-5093(01)01264-3CrossRef

Okada M, Tsutsumi M, Kitamura T, Ohtani R (2010) Initiation and growth of small cracks in directionally solidified Mar-M247 under creep-fatigue Part I: effect of microstructure. Fatigue Fract Eng Mater Struct 21(6):741–750. https://doi.org/10.1046/j.1460-2695.1998.00540.xCrossRef

Bor H, Chao C, Ma C (1997) The influence of magnesium on carbide characteristics and creep behavior of the Mar-M247 superalloy. Scripta materialia 38(2):329–335. https://doi.org/10.1016/S1359-6462(97)00444-2CrossRef

Baldan R, Azevedo e Silva PRS, Nunes CA, Coelho GC (2013) Aging of a new niobium-modified MAR-M247 nickel-based superalloy. J Mater Eng Perform 22(8):2337–2342. https://doi.org/10.1007/s11665-013-0531-1CrossRef

Bor HY, Wei CN, Jeng RR, Ko PY (2008) Elucidating the effects of solution and double ageing treatment on the mechanical properties and toughness of MAR-M247 superalloy at high temperature. Mater Chem Phys 109(2–3):334–341. https://doi.org/10.1016/j.matchemphys.2007.11.041CrossRef

Bor H, Ma C, Chao C (2000) The influence of Mg on creep properties and fracture behaviors of Mar-M247 superalloy under 1255 K/200 MPa. Metall and Mater Trans A 31(5):1365–1373. https://doi.org/10.1007/s11661-000-0255-3CrossRef

10.

Kaufman M (1984) Properties of cast Mar-M-247 for turbine blisk applications. Superalloys 1984:43–52. https://doi.org/10.7449/1984/Superalloys_1984_43_52CrossRef

11.

Liu M-C, Sheng G-M, He H-J, Jiao Y-J (2017) Microstructural evolution and mechanical properties of TLP bonded joints of Mar-M247 superalloys with Ni-Cr-Co-W-Ta-B interlayer. J Mater Process Technol 246:245–251. https://doi.org/10.1016/j.jmatprotec.2017.03.021CrossRef

12.

Rahimian M, Milenkovic S, Sabirov I (2013) Microstructure and hardness evolution in MAR-M247 Ni-based superalloy processed by controlled cooling and double heat treatment. J Alloy Compd 550:339–344. https://doi.org/10.1016/j.jallcom.2012.10.129CrossRef

13.

Nathal MV, Ebert LJ (1985) The influence of cobalt, tantalum, and tungsten on the microstructure of single crystal nickel-base superalloys. Metall Trans A 16(10):1849–1862. https://doi.org/10.1007/bf02670372CrossRef

14.

Gasko KL, Janowski GM, Pletka BJ (1988) The influence of γ-γ′ eutectic on the mechanical properties of conventionally cast MAR-M247. Mater Sci Eng A 104:1–8. https://doi.org/10.1016/0025-5416(88)90400-4CrossRef

15.

Baldan R, da Rocha RLP, Tomasiello RB, Nunes CA, da Silva Costa AM, Barboza MJR, Coelho GC, Rosenthal R (2013) Solutioning and aging of MAR-M247 nickel-based superalloy. J Mater Eng Perform 22(9):2574–2579. https://doi.org/10.1007/s11665-013-0565-4CrossRef

16.

Liao J-H, Bor H-Y, Wei C-N, Chao C-G, Liu T-F (2012) Influence of microstructure and its evolution on the mechanical behavior of modified MAR-M247 fine-grain superalloys at 871°C. Mater Sci Eng A 539:93–100. https://doi.org/10.1016/j.msea.2012.01.059CrossRef

17.

Milenkovic S, Sabirov I, Llorca J (2012) Effect of the cooling rate on microstructure and hardness of MAR-M247 Ni-based superalloy. Mater Lett 73:216–219. https://doi.org/10.1016/j.matlet.2012.01.028CrossRef

18.

Rakoczy Ł, Grudzień M, Zielińska-Lipiec A (2018) Contribution of microstructural constituents on hot cracking of MAR-M247 nickel based superalloy. Arch Metall Mater 63:181–189. https://doi.org/10.24425/118926CrossRef

19.

Yeratapally SR, Hochhalter JD, Ruggles TJ, Sangid MD (2017) Investigation of fatigue crack incubation and growth in cast MAR-M247 subjected to low cycle fatigue at room temperature. Int J Fract 208:79–96. https://doi.org/10.1007/s10704-017-0213-3CrossRef

20.

Eckmann S, Schweizer C (2017) Characterization of fatigue crack growth, damage mechanisms and damage evolution of the nickel-based superalloys MAR-M247 CC (HIP) and CM-247 LC under thermomechanical fatigue loading using in situ optical microscopy. Int J Fatigue 99:235–241. https://doi.org/10.1016/j.ijfatigue.2017.01.015CrossRef

21.

Reza Abedi M, Hamed S, Hossein R (2016) The effect of repair welding number on microstructure of hastelloy X fabricated via TIG process. Int J Mater Sci Appl 5(2):43–48. https://doi.org/10.11648/j.ijmsa.20160502.12CrossRef

22.

Wang Q, Sun DL, Na Y, Zhou Y, Han XL, Wang J (2011) Effects of TIG welding parameters on morphology and mechanical properties of welded joint of Ni-base superalloy. Procedia Engineering 10:37–41. https://doi.org/10.1016/j.proeng.2011.04.009CrossRef

23.

Chen C, Fan C, Cai X, Liu Z, Lin S, Yang C (2019) Arc characteristics and weld appearance in pulsed ultrasonic assisted GTAW process. Results in Physics 15:102692. https://doi.org/10.1016/j.rinp.2019.102692CrossRef

24.

Vidyarthy RS, Dwivedi DK, Muthukumaran V (2018) Optimization of A-TIG process parameters using response surface methodology. Mater Manuf Processes 33(7):709–717. https://doi.org/10.1080/10426914.2017.1303154CrossRef

25.

Li Z, Gobbi SL, Richter KH (1997) Autogenous welding of Hastelloy X to Mar-M 247 by laser. J Mater Process Technol 70(1–3):285–292. https://doi.org/10.1016/s0924-0136(97)02939-7CrossRef

26.

Allen C, Shaw-Edwards R, Nijdam T (2015) Nickel-containing superalloy laser weld qualities and properties. J Laser Appl 27:S29001. https://doi.org/10.2351/1.4906301CrossRef

27.

Alvarez P, Vázquez L, Ruiz N, Rodríguez P, Magaña A, Niklas A, Santos F (2019) Comparison of hot cracking susceptibility of TIG and laser beam welded alloy 718 by varestraint testing. Metals 9(9):985. https://doi.org/10.3390/met9090985CrossRef

28.

Böttger B, Apel M, Jokisch T (2020) Senger A, Phase-field study on microstructure formation in Mar-M247 during electron beam welding and correlation to hot cracking susceptibility, IOP Conference Series: Materials Science and Engineering. IOP Publishing, 012072. https://doi.org/10.1088/1757-899X/861/1/012072

29.

Stone H, Roberts S, Reed R (2000) A process model for the distortion induced by the electron-beam welding of a nickel-based superalloy. Metall and Mater Trans A 31(9):2261–2273. https://doi.org/10.1007/s11661-000-0143-xCrossRef

30.

Węglowski MS, Błacha S, Phillips A (2016) Electron beam welding—techniques and trends—review. Vacuum 130:72–92. https://doi.org/10.1016/j.vacuum.2016.05.004CrossRef

31.

Ma Z (2008) Friction stir processing technology: a review. Metall and Mater Trans A 39(3):642–658. https://doi.org/10.1007/s11661-007-9459-0CrossRef

32.

Senkov ON, Mahaffey DW, Semiatin SL, Woodward C (2014) Inertia friction welding of dissimilar superalloys Mar-M247 and LSHR. Metall and Mater Trans A 45(12):5545–5561. https://doi.org/10.1007/s11661-014-2512-xCrossRef

33.

Mahaffey DW, Senkov ON, Shivpuri R, Semiatin SL (2016) Effect of process variables on the inertia friction welding of superalloys LSHR and Mar-M247. Metall and Mater Trans A 47(8):3981–4000. https://doi.org/10.1007/s11661-016-3600-xCrossRef

34.

Magalhães V, Leitão C, Rodrigues D (2018) Friction stir welding industrialisation and research status. Sci Technol Weld Joining 23(5):400–409. https://doi.org/10.1080/13621718.2017.1403110CrossRef

35.

Singh RP, Dubey S, Singh A, Kumar S (2021) A review paper on friction stir welding process. Materials Today: Proceedings 38:6–11. https://doi.org/10.1016/j.matpr.2020.05.208CrossRef

36.

Rathinasuriyan C, Pavithra E, Sankar R, Kumar VS (2021) Current status and development of submerged friction stir welding: a review. Int J Precis Eng Manuf-Green Technol 8(2):687–701. https://doi.org/10.1007/s40684-020-00187-6CrossRef

37.

Wu H, Chang Y, Lu L, Bai J (2017) Review on magnetically controlled arc welding process. Int J Adv Manuf Technol 91(9–12):4263–4273. https://doi.org/10.1007/s00170-017-0068-9CrossRef

38.

Jiang SY, Wang XW, Chen HM, Liu P (2012) The impact of adscititious longitudinal magnetic field on CO2 welding process, Advanced Materials Research. Trans Tech Publ, pp 1447–1450. https://doi.org/10.4028/www.scientific.net/AMR.538-541.1447

39.

Watanabe T, Nakamura H, Ei K (2010) Grain refinement by TIG welding with electromagnetic stirring—a study of solidification control of austenitic stainless steel weld metal. Weld Int 3(4):312–317. https://doi.org/10.1080/09507118909447649CrossRef

40.

Lim YC, Yu X, Cho JH, Sosa J, Farson DF, Babu SS, McCracken S, Flesner B (2013) Effect of magnetic stirring on grain structure refinement Part 2—nickel alloy weld overlays. Sci Technol Weld Joining 15(5):400–406. https://doi.org/10.1179/136217110x12720264008231CrossRef

41.

Jeng S-L, Su D-P, Lee J-T, Huang J-Y (2020) The impact of EMS on the temperature fluctuations, appearance, and microstructure of GTA stainless steel welds. Metals 10(1):118. https://doi.org/10.3390/met10010118CrossRef

42.

Liu Y, Sun Q, Liu J, Wang S, Feng J (2015) Effect of axial external magnetic field on cold metal transfer welds of aluminum alloy and stainless steel. Mater Lett 152:29–31. https://doi.org/10.1016/j.matlet.2015.03.077CrossRef

43.

Jeng S-L, Su D-P, Lee J-T, Huang J-Y (2018) Effects of electromagnetic stirring on the cast austenitic stainless steel weldments by gas tungsten arc welding. Metals 8(8):630. https://doi.org/10.3390/met8080630CrossRef

44.

Tsang T, Savage D (1971) The effect of arc oscillation in either transverse or longitudinal direction has beneficial effect on the fusion zone microstructure and tends to reduce sensitivity in hot cracking. Weld J 50(11):777–786

45.

Chen R, Jiang P, Shao X, Mi G, Wang C (2017) Effect of static magnetic field on microstructures and mechanical properties of laser-MIG hybrid welding for 304 stainless steel. Int J Adv Manuf Technol 91(9–12):3437–3447. https://doi.org/10.1007/s00170-017-0006-xCrossRef

46.

Malinowski-Brodnicka M, Den Ouden G, Vink W (1990) Effect of electromagnetic stirring on GTA welds in austenitic stainless steel. Welding J. 2(2); 52s-59s. http://files.aws.org/wj/supplement/WJ_1990_02_s52.pdf

47.

Arturo GRM, Hugo LMV, Rafael GH, Egberto BB, Antonio GSJ (2015) Electrochemical characterization of AISI 2205 duplex stainless steel welded joints with electromagnetic interaction. Procedia Mater Sci 8:950–958. https://doi.org/10.1016/j.mspro.2015.04.156CrossRef

48.

Curiel FF, García R, López VH, González-Sánchez J (2011) Effect of magnetic field applied during gas metal arc welding on the resistance to localised corrosion of the heat affected zone in AISI 304 stainless steel. Corros Sci 53(7):2393–2399. https://doi.org/10.1016/j.corsci.2011.03.022CrossRef

49.

Shoichi M, Yukio M, Koki T, Yasushi T, Yukinori M, Yusuke M (2013) Study on the application for electromagnetic controlled molten pool welding process in overhead and flat position welding. Sci Technol Weld Joining 18(1):38–44. https://doi.org/10.1179/1362171812y.0000000070CrossRef

50.

Avilov VV, Gumenyuk A, Lammers M, Rethmeier M (2013) PA position full penetration high power laser beam welding of up to 30 mm thick AlMg3 plates using electromagnetic weld pool support. Sci Technol Weld Joining 17(2):128–133. https://doi.org/10.1179/1362171811y.0000000085CrossRef

51.

Pearce BP, Kerr HW (1981) Grain refinement in magnetically stirred GTA welds of aluminum alloys. Metall Trans B 12(3):479–486. https://doi.org/10.1007/bf02654317CrossRef

52.

Griffiths WD, McCartney DG (1997) The effect of electromagnetic stirring on macrostructure and macrosegregation in the aluminium alloy 7150. Mater Sci Eng, A 222(2):140–148. https://doi.org/10.1016/s0921-5093(96)10527-xCrossRef

53.

Gao ZH, Xu J, Zhang ZF, Tang MO (2013) Effect of annular electromagnetic stirring on microstructure and mechanical property of 7075 aluminium alloy. Mater Sci Forum 749:75–81. https://doi.org/10.4028/www.scientific.net/MSF.749.75CrossRef

54.

Chen Y, Sui FF, Cong KL, Yan XQ, Zhang GY, Guan SK (2011) Effects of shielding gas and magnetic field on characteristics of AZ31 magnesium alloy by TIG welding. Mater Sci Forum 704–705:1186–1196. https://doi.org/10.4028/www.scientific.net/MSF.704-705.1186CrossRef

55.

Yao Q, Luo Z, Li Y, Yan FY, Duan R (2014) Effect of electromagnetic stirring on the microstructures and mechanical properties of magnesium alloy resistance spot weld. Mater Des 63:200–207. https://doi.org/10.1016/j.matdes.2014.06.004CrossRef

56.

Zhang X-L, Li T-J, Teng H-T, Xie S-S, Jin J-Z (2008) Semisolid processing AZ91 magnesium alloy by electromagnetic stirring after near-liquidus isothermal heat treatment. Mater Sci Eng, A 475(1–2):194–201. https://doi.org/10.1016/j.msea.2007.04.049CrossRef

57.

Chen Y, Zhang L, Liu W, Wu G, Ding W (2016) Preparation of Mg–Nd–Zn–(Zr) alloys semisolid slurry by electromagnetic stirring. Mater Des 95:398–409. https://doi.org/10.1016/j.matdes.2016.01.131CrossRef

58.

Bor HY, Chao CG, Ma CY (1999) The effects of Mg microaddition on the mechanical behavior and fracture mechanism of MAR-M247 superalloy at elevated temperatures. Metall and Mater Trans A 30(3):551–561. https://doi.org/10.1007/s11661-999-0047-3CrossRef

Titel: Impact of electromagnetic stirring on the gas metal arc welding of an MAR-M247 superalloy
verfasst von: Tzeng Yu-Chih
Cheng-Yu Lu
Ren-Yu Chen
Publikationsdatum: 30.10.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 1-2/2022
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-08236-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2022

Design and analysis of compound structures integrated with bio-based phase change materials and lattices obtained through additive manufacturing

The modified constitutive model considering strain-temperature coupling and dynamic recrystallization effective for FEM simulation of milling process

Comparative LCA of automotive gear hobbing processes with flood lubrication and MQL

Prediction and compensation strategy of contour error in multi-axis motion system

The study of machine learning for wire rupture prediction in WEDM

Influence of metal transfer behavior under Ar and CO2 shielding gases on geometry and surface roughness of single and multilayer structures in GMAW-based wire arc additive manufacturing of mild steel

Premium Partner

Marktübersichten