nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

22.02.2024 | ORIGINAL ARTICLE

Influences of laser on the energy parameters of the electric arc in the case of laser-MIG hybrid welding

verfasst von: Lyes Bidi, Philippe Le Masson, Eugen Cicala

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 7-8/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The work presented in this paper deals with the relationship between the laser and the electric arc during welding and chamfer filling operations using the hybrid laser welding process.This welding process requires perfect mastery, in order to increase the productivity and quality of welds, especially in nuclear facilities. Mastering the hybrid process involves a phase of understanding the phenomena involved in a welding operation. To better understand the role of each process in the combination of laser and MIG, we carried out a laser-only and MIG-only tests using the same operating parameters as those used in hybrid welding. Test results show that the laser preheats the surface, with some of the energy deposited on the side walls of the chamfer. The role of MIG is to deposit metal to fill the chamfer. We can therefore consider that its main role is to provide a volumetric energy deposit.Using the experimental design, we studied the influence of five parameters such as wire speed, distance between the laser and the MIG, welding speed, laser power, and laser defocusing on the power of the MIG.The results show that the interaction between laser power and wire speed has the greatest effect on arc power, followed by wire speed and other interactions.To verify the arc energy values given by the FRONIUS generator, we carried out additional measurements using a SEFRAM device. The results measured by FRONIUS are always higher than those of SEFRAM. Both series of measurements follow the same variations.

Vorheriger Artikel Geometric error compensation method using the Laser R-test

Nächster Artikel A disturbance evaluation method for scheduling mechanisms in digital twin-based workshops

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Birdeanua AV, Ciuca C, Puicea A (2012) Pulsed LASER-(micro) TIG hybrid welding: process characteristics. J Mater Process Technol 212:890–902. https://doi.org/10.1016/j.jmatprotec.2011.11.014CrossRef

Gao M, Mei S, Wang Z, Li X, Zeng X (2012) Process and joint characterizations of laser–MIG hybrid welding of AZ31 magnesium alloy. J Mater Process Technol 212:1338–1346. https://doi.org/10.1016/j.jmatprotec.2012.01.011CrossRef

Swanson PT, Page CJ, Read E, Wu HZ (2007) Plasma augmented laser welding of 6 mm steel plate. Sci Technol Weld Joining 12(2):153–160CrossRef

Gu X, Li H, Yang L, Gao Y (2013) Coupling mechanism of laser and arcs of laser- twin-arc hybrid welding and its effect on welding process. Opt Laser Technol 48:246–253. https://doi.org/10.1016/j.optlastec.2012.10.025CrossRef

Jiang Z, Hua X, Huang L, Dongsheng Wu, Li F, Zhang Y (2018) Double-sided hybrid laser-MIG welding plus MIG welding of 30-mm-thick aluminium alloy. Int J Adv Manuf Technol 97:903–913. https://doi.org/10.1007/s00170-018-1997-7CrossRef

Le Guen E, Carin M, Fabbro R, Coste F, Masson PL (2011) 3D heat transfer model of hybrid laser Nd:Yag-MAG welding of S355 steel and experimental validation. Int J Heat Mass Transf 54:1313–1322. https://doi.org/10.1016/j.ijheatmasstransfer.2010.12.010CrossRef

Leo P, Renna G, Casalino G, Olabi AG (2015) Effect of power distribution on the weld quality during hybrid laser welding of an Al–Mg alloy. Opt Laser Technol 73:118–126. https://doi.org/10.1016/j.optlastec.2015.04.021CrossRef

Jie Su, Dong J, Luo Z, Yang Y, Bi Y, Zhang Y (2023) Effect of laser-arc synergy on melting energy in laser-CMT hybrid welding of aluminum alloy. Optik 292:171406. https://doi.org/10.1016/j.ijleo.2023.171406CrossRef

Shenghai Z, Yifu S, Huijuan Q (2013) The technology and welding joint properties of hybrid laser-TIG welding on thick plate. Opt Laser Technol 48:381–388. https://doi.org/10.1016/j.optlastec.2012.11.014CrossRef

10.

Atabaki MM, Nikodinovski M, Chenier P, Maa J, Liu W, Kovacevic R (2014) Experimental and numerical investigations of hybrid laser arc welding of aluminum alloys in the thick T-joint configuration. Opt Laser Technol 59:68–92. https://doi.org/10.1016/j.optlastec.2013.12.008CrossRef

11.

Frostevarg J, Kaplan AFH (2014) Undercuts in laser arc hybrid welding. Phys Procedia 56:663–672. https://doi.org/10.1016/j.phpro.2014.08.071CrossRef

12.

Lang Q, Zhang X, Song G, Liu L (2021) Effects of different laser power and welding speed on the microstructure and mechanical properties of TRIP joints in laser-TIG arc hybrid lap filler wire welding. Mater Today Commun 29:102925. https://doi.org/10.1016/j.mtcomm.2021.102925CrossRef

13.

El Rayes M, Walz C, Sepold G (2004) The influence of various hybrid welding parameters on bead geometry. Weld J 83(5):147–153s

14.

Bidi L, Le Masson P, Cicala E, Primault C (2017) Experimental design method to the weld bead geometry optimization for hybrid laser-MAG welding in a narrow chamfer configuration. Opt Laser Technol 89:114–125. https://doi.org/10.1016/j.optlastec.2016.09.046CrossRef

15.

Webster S, Kristensen JK, Petring D (2008) Joining of thick section steels using hybrid laser welding. Ironmak Steelmak 35(7):496–504CrossRef

16.

Shi S (2005) Laser and hybrid laser MAG welding of thick section C-MN steel. In: Proc. of the 2005 International Forum on Welding Technologies in Energy Engineering, Shanghai, China

17.

Piekarska W, Kubiak M (2013) Modeling of thermal phenomena in single laser beam and laser-arc hybrid welding processes using projection method. Appl Math Model 37:2051–2062. https://doi.org/10.1016/j.apm.2012.04.052MathSciNetCrossRef

18.

Piekarska W, Kubiak M, Bokota A (2011) Numerical simulation of thermal phenomena and phase transformations in laser-arc hybrid welded joints. Arch Metall Mater 56(2):409–421CrossRef

19.

Bendaoud I, Matteï S, Cicala E, Tomashchuk I, Andrzejewski H, Sallamand P, Mathieu A, Bouchaud F (2014) The numerical simulation of heat transfer during a hybrid laser–MIG welding using equivalent heat source approach. Opt Laser Technol 56:334–342. https://doi.org/10.1016/j.optlastec.2013.09.007CrossRef

20.

Bidi L, Mattei S, Cicala E, Andrzejewski H, Le Masson P, Schroeder J (2011) The use of exploratory experimental designs combined with thermal numerical modelling to obtain a predictive tool for hybrid laser/MIG welding and coating processes. Opt Laser Technol 43(3):537–545. https://doi.org/10.1016/j.optlastec.2010.07.011CrossRef

21.

Li Y, Geng S, Zhu Z, Wang Y, Mi G, Jiang P (2022) Effects of heat source configuration on the welding process and joint formation in ultra-high power laser-MAG hybrid welding. J Manuf Process 77:40–53. https://doi.org/10.1016/j.jmapro.2022.02.045CrossRef

22.

Meng Y, Gao M, Zeng X (2018) Quantitative analysis of synergic effects during laser-arc hybrid welding of AZ31 magnesium alloy. Opt Lasers Eng 111:183–192. https://doi.org/10.1016/j.optlaseng.2018.08.013CrossRef

23.

Zhang C, Gao M, Zeng X (2019) Influences of synergy effect between laser and arc on laser-arc hybrid welding of aluminum alloys. Opt Laser Technol 120:105766. https://doi.org/10.1016/j.optlaseng.2018.08.013CrossRef

24.

Zhang S, Wang Y, Zhu M, Feng Y, Nie P, Li Z (2020) Effects of heat source arrangements on Laser-MAG hybrid welding characteristics and defect formation mechanism of 10CrNi3MoV steel. J Manuf Process 58:563–573. https://doi.org/10.1016/j.jmapro.2020.08.027CrossRef

25.

Sheng Z, Xu Y, Guo H, Zhou J, Chang L, Ding W, Bao Y (2022) Study on droplet transfer behavior during medium and low power laser assisted pulsed MAG hybrid welding. Optik 270:169972. https://doi.org/10.1016/j.ijleo.2022.169972CrossRef

26.

Liu F, Yang B, Sun H, Wang H, Tan C, Wang G, Chen B (2023) Mechanism investigation for the influence of laser power on droplet transfer behaviors in laser-MIG hybrid welding. Opt Laser Technol 157:108750. https://doi.org/10.1016/j.optlastec.2022.108750CrossRef

27.

Li X, Hu Z, Lai J, Gao W, Gong M, Zhang C, Gao M (2023) A new understanding of laser-arc plasma interaction of hybrid welding based on arc layering behaviors. J Manuf Process 88:125–133. https://doi.org/10.1016/j.jmapro.2023.01.045CrossRef

28.

Guo XuMin, Liu ZuMing, Zhao XingChuan, Zhang WenBin (2023) Welding process with hybrid arc by compositing two free arcs into constraint arc. J Manuf Process 104:405–417. https://doi.org/10.1016/j.jmapro.2023.09.021CrossRef

29.

Shen J, Gonçalves R, Choi YT, Lopes JG, Yang J, Schell N, Kim HS, Oliveira JP (2022) Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 410stainless steel filler metal. Mater Sci Eng, A 857:144025. https://doi.org/10.1016/j.msea.2022.144025CrossRef

30.

Shen J, Gonçalves R, Choi YT, Lopes JG, Yang J, Schell N, Kim HS, Oliveira JP (2023) Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308-stainless steel filler metal. Scripta Mater 222:115053. https://doi.org/10.1016/j.scriptamat.2022.115053CrossRef

31.

Cicală EF (ed) (2005) Metoda experimentelor factoriale, proiectarea experimentelor, modelare, optimizare. Editura Politehnica, Timişoara, p 320

32.

Goupy J (2001) Introduction aux plans d’expériences,” 2e Edition, Dunond, ed,Paris, 2001

33.

Montgomery DC (1991) Design and analysis of experiments. John Wiley & Sons, Singapore

Titel: Influences of laser on the energy parameters of the electric arc in the case of laser-MIG hybrid welding
verfasst von: Lyes Bidi
Philippe Le Masson
Eugen Cicala
Publikationsdatum: 22.02.2024
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 7-8/2024
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-024-13244-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7-8/2024

Cross-scale identification method for friction damage on the tool flank of high-feed milling cutter

Investigation of depth error of microgroove in micro-EDM adopting ultrasonic circular vibration (UCV) electrode

Correction to: Research status of influence mechanism of surface integrity on fatigue behavior of metal workpieces: a review

A surface quality prediction model considering the machine-tool-material interactions

Cold formability of friction stir processed 5754-H111 and 6082-T6 aluminum alloys: an experimental and numerical study

Optimization of shot peening parameters for blades based on the constraint of equivalent residual stress-induced deformation

Premium Partner

Marktübersichten