Internal mass transfer coefficient during drying of softwood (Pinus elliottii Engelm.) boards

A drying experiment with 36 mm thick softwood boards having an average initial moisture content of approximately 1.2 (dry basis) was performed. Drying temperatures of 40, 60 and 80°C were used. Relative humidity and superficial air velocity were maintained at 40% and 3.0 m s⁻¹, respectively. Internal moisture content was monitored along the process in the single direction of the internal flux of water. Loss in mass of the entire timber board was also determined. An effective coefficient of mass transfer was tuned to internal experimental profiles of moisture content by involving the Fick’s second law. An explicit finite difference method for the numerical solution of the mass balance represented by the Fick’s equation was combined with the simplex method of optimization to obtain a mass transport parameter in the magnitude of 1.5–3.5 × 10⁻⁹ m² s⁻¹. A positive and significant effect of temperature on the effective diffusion coefficient, which was well described by an Arrhenius type expression, was deduced from this investigation. Although a negative effect of the average moisture content on the internal resistance to mass transfer was also observed, it was much less evident; mainly above the wood fiber saturation point. A negligible influence of the local moisture content on the investigated transport parameter was noticed when either a linear or a nonlinear model correlating these variables was adopted.