nach oben

Journal of Materials Engineering and Performance

Erschienen in:

05.01.2021

Investigation of Building Orientation and Aging on Strength–Stiffness Performance of Additively Manufactured Maraging Steel

verfasst von: A. R. Oliveira, J. A. A. Diaz, A. D. C. Nizes, A. L. Jardini, E. G. Del Conte

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 2/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The interaction between building orientation and heat treatment may change the strength–stiffness behavior of maraging steel manufactured by powder bed fusion (PBF). Further investigations about the correlation of the fracture characteristics and microstructures with the measured properties are needed to improve the process findings. Thus, this study investigated the way an interaction between building orientation (0°, 45°, and 90°) and specimen condition (as-built and aged) may change the defects interaction mechanism and the mechanical properties of the maraging 300 steel manufactured by PBF. Aging treatment, microstructure characterization, density measuring, tensile and microhardness tests, and fractography were performed on the specimens. The aging treatment strengthened the material, which also reduced the probability of defect coalescence. The interaction of building orientation and aging affected the stiffness, rising this in ≈ 70.5 GPa for the 0° aged specimens. Furthermore, this interaction changed the melt pool stretching direction, and the behavior of the defect coalescence rises the elongation at break in ≈ 16.5% for 0° as-built specimens. The investigated mechanisms show the importance of considering the interaction between the building orientation and condition (as-built and aged) for the mechanical performance of additively manufactured maraging steel 300.

Vorheriger Artikel Structural Evolution and Mechanical and Magnetic Properties of Nonequiatomic CoFe2NiMn0.3Alx (0.25 ≤ x ≤ 1.00) High-Entropy Alloys

Nächster Artikel Nanomechanical Response of Pulsed Tungsten Inert Gas Welded Titanium Alloy by Nanoindentation and Atomic Force Microscopy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

C. Kamath, Data Mining and Statistical Inference in Selective Laser Melting, Int. J. Adv. Manuf. Technol., 2016, 86, p 1659–1677. https://doi.org/10.1007/s00170-015-8289-2CrossRef

Y. Bai, D. Wang, Y. Yang, and H. Wang, Effect of Heat Treatment on the Microstructure and Mechanical Properties of Maraging Steel by Selective Laser Melting, Mater. Sci. Eng. A, 2019, 760, p 105–117. https://doi.org/10.1016/j.msea.2019.05.115CrossRef

ASTM (2015) ISO/ASTM 52900:2015 - Standard Terminology for Additive Manufacturing - General Principles - Terminology. ASTM Int. 1–9

T. Maconachie, M. Leary, J. Zhang et al., Effect of Build Orientation on the Quasi-static and Dynamic Response of SLM AlSi10Mg, Mater. Sci. Eng. A, 2020, https://doi.org/10.1016/j.msea.2020.139445CrossRef

J.J. Lewandowski and M. Seifi, Metal Additive Manufacturing: A Review of Mechanical Properties, Annu. Rev. Mater. Res., 2016, 46, p 151–186. https://doi.org/10.1146/annurev-matsci-070115-032024CrossRef

B. Mooney, K.I. Kourousis, R. Raghavendra, and D. Agius, Process Phenomena Influencing the Tensile and Anisotropic Characteristics of Additively Manufactured Maraging Steel, Mater. Sci. Eng. A, 2019, 745, p 115–125. https://doi.org/10.1016/j.msea.2018.12.070CrossRef

Y. Yao, K. Wang, X. Wang et al., Microstructural Heterogeneity and Mechanical Anisotropy of 18Ni-330 Maraging Steel Fabricated by Selective Laser Melting: The Effect of Build Orientation and Height, J. Mater. Res., 2020, 2709, p 1–12. https://doi.org/10.1557/jmr.2020.126CrossRef

F.F. Conde, J.D. Escobar, J.P. Oliveira et al., Effect of Thermal Cycling and Aging Stages on the Microstructure and Bending Strength of a Selective Laser Melted 300-Grade Maraging Steel, Mater. Sci. Eng. A, 2019, 758, p 192–201. https://doi.org/10.1016/j.msea.2019.03.129CrossRef

F.F. Conde, J.D. Escobar, J.P. Oliveira et al., Austenite Reversion Kinetics and Stability During Tempering of an Additively Manufactured Maraging 300 Steel, Addit. Manuf., 2019, 29, p 100804. https://doi.org/10.1016/j.addma.2019.100804CrossRef

10.

G. Casalino, S.L. Campanelli, N. Contuzzi, and A.D. Ludovico, Experimental Investigation and Statistical Optimisation of the Selective Laser Melting Process of a Maraging Steel, Opt. Laser Technol., 2015, 65, p 151–158. https://doi.org/10.1016/j.optlastec.2014.07.021CrossRef

11.

K. Kempen, E. Yasa, L. Thijs et al., Microstructure and Mechanical Properties of Selective Laser Melted 18Ni-300 Steel, Phys. Procedia, 2011, 12, p 255–263. https://doi.org/10.1016/j.phpro.2011.03.033CrossRef

12.

J. Mutua, S. Nakata, T. Onda, and Z.C. Chen, Optimization of Selective Laser Melting Parameters and Influence of Post Heat Treatment on Microstructure and Mechanical Properties of Maraging Steel, Mater. Des., 2018, 139, p 486–497. https://doi.org/10.1016/j.matdes.2017.11.042CrossRef

13.

E. Cyr, A. Lloyd, and M. Mohammadi, Tension-Compression Asymmetry of Additively Manufactured Maraging Steel, J. Manuf. Process., 2018, 35, p 289–294. https://doi.org/10.1016/j.jmapro.2018.08.015CrossRef

14.

S. Yin, C. Chen, X. Yan et al., The Influence of Aging Temperature and Aging Time on the Mechanical and Tribological Properties of Selective Laser Melted Maraging 18Ni-300 Steel, Addit. Manuf., 2018, 22, p 592–600. https://doi.org/10.1016/j.addma.2018.06.005CrossRef

15.

C. Tan, K. Zhou, M. Kuang et al., Microstructural Characterization and Properties of Selective Laser Melted Maraging Steel with Different Build Directions, Sci. Technol. Adv. Mater., 2018, 19, p 746–758. https://doi.org/10.1080/14686996.2018.1527645CrossRef

16.

ASM International (1991) ASM HANDBOOK - HEAT TREATING

17.

C. Tan, K. Zhou, W. Ma et al., Microstructural Evolution, Nanoprecipitation Behavior and Mechanical Properties of Selective Laser Melted high-Performance Grade 300 Maraging Steel, Mater. Des., 2017, 134, p 23–34. https://doi.org/10.1016/j.matdes.2017.08.026CrossRef

18.

T.H. Becker and D. Dimitrov, The Achievable Mechanical Properties of SLM Produced Maraging Steel 300 Components, Rapid Prototyp. J., 2016, 22, p 487–494. https://doi.org/10.1108/RPJ-08-2014-0096CrossRef

19.

J. Suryawanshi, K.G. Prashanth, and U. Ramamurty, Tensile, Fracture, and Fatigue Crack Growth Properties of a 3D Printed Maraging Steel Through Selective Laser Melting, J. Alloys Compd., 2017, 725, p 355–364. https://doi.org/10.1016/j.jallcom.2017.07.177CrossRef

20.

D. Kim, T. Kim, K. Ha et al., Effect of Heat Treatment Condition on Microstructural and Mechanical Anisotropies of Selective Laser Melted Maraging 18Ni-300 Steel, Metals (Basel), 2020, https://doi.org/10.3390/met10030410CrossRef

21.

22.

S. Dehgahi, M.H. Ghoncheh, A. Hadadzadeh et al., The Role of Titanium on the Microstructure and Mechanical Properties of Additively Manufactured C300 Maraging Steels, Mater. Des., 2020, 194, p 108965. https://doi.org/10.1016/j.matdes.2020.108965CrossRef

23.

J. Damon, T. Hanemann, S. Dietrich et al., Orientation Dependent Fatigue Performance and Mechanisms of Selective Laser Melted Maraging Steel X3NiCoMoTi18-9-5, Int. J. Fatigue, 2019, 127, p 395–402. https://doi.org/10.1016/j.ijfatigue.2019.06.025CrossRef

24.

ASTM International (2014) A751:14a - Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products. 6

25.

D.C. Montgomery, Design and Analysis of Experiments, 7th ed., Wiley, Hoboken, 2008

26.

ASTM International (2019) 52921:2019 - Standard Terminology for Additive Manufacturing - Coordinate Systems and Test. 1–13

27.

ASTM International, E8/E8M Standard Test Methods for Tension Testing of Metallic Materials, Annu. B ASTM Stand., 2010, 4, p 1–27. https://doi.org/10.1520/E0008CrossRef

28.

ASM International (2004) Introduction to Tensile Testing. In: Davis JR (ed) Tensile testing, 2 ed. pp 1–13

29.

ASTM International A (2013) B962-13 - Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle. 1–7

30.

ASTM, Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation - ASTM E975-13, ASTM, 2009, 03, p 1–7. https://doi.org/10.1520/E0975-13CrossRef

31.

A.F. de Souza, K.S. Al-Rubaie, S. Marques et al., Effect of Laser Speed, Layer Thickness, Part Position on the Mechanical Properties of Maraging 300 Parts Manufactured by Selective Laser Melting, Mater. Sci. Eng. A, 2019, https://doi.org/10.1016/j.msea.2019.138425CrossRef

32.

J. Song, Q. Tang, Q. Feng et al., Effect of Heat Treatment on Microstructure and Mechanical Behaviours of 18Ni-300 Maraging Steel Manufactured by Selective Laser Melting, Opt. Laser Technol., 2019, 120, p 1–11. https://doi.org/10.1016/j.optlastec.2019.105725CrossRef

33.

Carpenter Additive L (2019) Technical Data Sheet - CT PowderRange M300 F. 4

34.

T. Bhardwaj and M. Shukla, Effect of Laser Scanning Strategies on Texture, Physical and Mechanical Properties of Laser Sintered Maraging Steel, Mater. Sci. Eng. A, 2018, 734, p 102–109. https://doi.org/10.1016/j.msea.2018.07.089CrossRef

35.

D. Croccolo, M. De Agostinis, S. Fini et al., Sensitivity of Direct Metal Laser Sintering Maraging Steel Fatigue Strength to Build Orientation and Allowance for Machining, Fatigue Fract. Eng. Mater. Struct., 2019, 42, p 374–386. https://doi.org/10.1111/ffe.12917CrossRef

36.

Surreddi KB, Oikonomou C, Karlsson P, et al (2017) In-Situ Micro-tensile Testing of Additive Manufactured Maraging Steels in the SEM: Influence of Build Orientation, Thickness and Roughness on the Resulting Mechanical Properties. Proc Euro PM 2017 Int Powder Metall Congr Exhib

37.

L. Thijs, J. Van Humbeeck, K. Kempen et al., Investigation on the Inclusions in Maraging Steel Produced by Selective Laser Melting, Innov. Dev. Virtual Phys. Prototyp., 2012, https://doi.org/10.1201/b11341-48CrossRef

Titel: Investigation of Building Orientation and Aging on Strength–Stiffness Performance of Additively Manufactured Maraging Steel
verfasst von: A. R. Oliveira
J. A. A. Diaz
A. D. C. Nizes
A. L. Jardini
E. G. Del Conte
Publikationsdatum: 05.01.2021
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 2/2021
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-05414-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2021

A Numerical–Experimental Study of Wear Resistance of FeB/Fe2B Systems

Nanomechanical Response of Pulsed Tungsten Inert Gas Welded Titanium Alloy by Nanoindentation and Atomic Force Microscopy

Formability and Instability Evaluation of Friction Stir Processed AA6063-T6 Tubes During End Forming and Numerical Prediction

Study of Dry Sliding Wear Behavior of a Fe-Based Amorphous Coating Synthesized by Detonation Spraying on an AZ31B Magnesium Alloy

Reducing Crop Length of Rolling Material Using Predictive Model Analysis

Relationship Between the Microstructural Evolution and Wear Behavior of U71Mn Rail Steel

Premium Partner

Marktübersichten