nach oben

Journal of Materials Engineering and Performance

Erschienen in:

05.01.2021

Study of Dry Sliding Wear Behavior of a Fe-Based Amorphous Coating Synthesized by Detonation Spraying on an AZ31B Magnesium Alloy

verfasst von: Huayan Yuan, Haimin Zhai, Wensheng Li, Dongqing He, Bo Cheng, Li Feng

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 2/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A Fe-based amorphous coating was successfully deposited on an AZ31B magnesium alloy substrate by detonation spraying. The microstructure and sliding wear behavior of the coating were investigated in detail under dry conditions in ball-on disk mode by using a Si₃N₄ ball as the counterpart. It was found that the Fe-based amorphous coating presents an almost perfect amorphous structure, and the thickness, microhardness, porosity and amorphous content are 200 ± 30 μm, 825 ± 15 Hv_0.1, 1.0% and 89.3 ± 2%, respectively. The dry sliding wear tests indicate that the Fe-based amorphous coating presents a fairly low dry sliding wear rate of 3.14-11.5 × 10⁻⁶ mm³ N⁻¹ m⁻¹, which is two orders of magnitude lower than that of the AZ31B substrate under a normal load of 5 N and at a sliding speed of 0.25 m/s. This distinguished wear resistance is mainly attributed to the fact that the Fe-based amorphous coating prepared by detonation spraying has an extremely low porosity and high amorphous phase content. Moreover, as the increase in load and sliding speed, the dry sliding wear mechanism of the Fe-based amorphous coating changes from fatigue wear and oxidative wear to delamination wear and oxidative wear.

Vorheriger Artikel Research on Performance and Safety of Composite Inorganic Phase-Change Materials (NaNO3/SiO2/C) under Low-temperature Cold Shock

Nächster Artikel Effect of Potential on the Characteristics of Passive Film on a CoCrFeMnNi High-Entropy Alloy in Carbonate/Bicarbonate Solution

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

H. Zengin, Y. Turen, and L. Elen, A Comparative Study on Microstructure, Mechanical and Tribological Properties of A4, AE41, AS41 and AJ41 Magnesium Alloys, J. Mater. Eng. Perform., 2019, 28, p 4647–4657CrossRef

C. Taltavull, P. Rodrigo, B. Torres, A.J. Lopez, and J. Rams, Dry Sliding Wear Behavior of AM50B Magnesium Alloy, Mater. Des., 2014, 56, p 549–556CrossRef

Z.X. Wu, R. Ahmad, B.L. Yin, S. Sandlobes, and W.A. Curtin, Mechanistic Origin and Prediction of Enhanced Ductility in Magnesium Alloys, Science, 2018, 359(6374), p 447–452CrossRef

W. Guo, D. Wang, Y. Fu, L. Zhang, and Q.D. Wang, Dry Sliding Wear Properties of AZ31-Mg2Si Magnesium Matrix Composites, J. Mater. Eng. Perform., 2016, 25(10), p 4109–4114CrossRef

M. Mardali, H.R. Salimijazi, F. Karimzadeh, B. Luthringer, C. Blawert, and S. Labbaf, Comparative Study on Microstructure and Corrosion Behavior of Nanostructured Hydroxyapatite Coatings Deposited by High Velocity Oxygen Fuel and Flame Spraying on AZ61 Magnesium Based Substrates, Appl. Surf. Sci., 2019, 465, p 614–624CrossRef

Q. Wang, Q. Sun, M.X. Zhang, W.J. Niu, C.B. Tang, K.S. Wang, X. Rui, L. Zhai, and L. Wang, The Influence of Cold and Detonation Thermal Spraying Processes on the Microstructure and Properties of Al-based Composite Coatings on Mg Alloy, Surf. Coat. Technol., 2018, 352, p 627–633CrossRef

J.G. Shen, B.L. Zou, X.L. Cai, S.J. Dong, and X.Q. Cao, Fabrication and Properties of TiB₂-TiC Reinforced NiAl Coatings by Reactive Plasma Spraying on AZ91D Magnesium Alloy, Surf. Coat. Technol., 2019, 378, p 125055CrossRef

S. García-Rodríguez, A.J. López, B. Torres, and J. Rams, 316L Stainless Steel Coatings on ZE41 Magnesium Alloy using HVOF Thermal Spray for Corrosion Protection, Surf. Coat. Technol., 2016, 287, p 9–19CrossRef

Y.L. Kuo and K.H. Chang, Atmospheric Pressure Plasma Enhanced Chemical Vapor Deposition of SiOx Films for Improved Corrosion Resistant Properties of AZ31 Magnesium Alloys, Surf. Coat. Technol., 2015, 283, p 194–200CrossRef

10.

T. Ishizaki, J. Hieda, N. Saito, and O. Takai, Corrosion Resistance and Chemical Stability of Super-hydrophobic Film Deposited on Magnesium Alloy AZ31 by Microwave Plasma-enhanced Chemical Vapor Deposition, Electrochim. Acta., 2010, 55(23), p 7094–7101CrossRef

11.

H. Hoche, S. Gross, and M. Oechsner, Development of New PVD Coatings for Magnesium Alloys with Improved Corrosion Properties, Surf. Coat. Technol., 2014, 259, p 102–108CrossRef

12.

Z. Rajabalizadeh and D. Seifzadeh, Strontium Phosphate Conversion Coating as an Economical and Environmentally-Friendly Pretreatment for Electroless Plating on AM60B Magnesium Alloy, Surf. Coat. Technol., 2016, 304, p 450–458CrossRef

13.

N. Zhang, S.X. Yu, Q. Xing, X.L. Chen, M.X. Zhang, and D.J. Shen, Corrosion Performance of Composite MAO/TiO₂ Sol-Gel Coatings on Magnesium Alloy AZ91D, J. Mater. Eng. Perform., 2018, 27(11), p 6080–6086CrossRef

14.

H.M. Zhai, H. Wang, and F. Liu, A Strategy for Designing Bulk Metallic Glass Composites with Excellent Work-hardening and Large Tensile Ductility, J. Alloy. Compd., 2016, 685, p 322–330CrossRef

15.

J.C. Qiao, Q. Wang, J.M. Pelletier, H. Kato, R. Casalini, D. Crespo, E. Pineda, Y. Yao, and Y. Yang, Structural Heterogeneities and Mechanical Behavior of Amorphous Alloys, Prog. Mater Sci., 2019, 104, p 250–329CrossRef

16.

G.B. Shan, Y.Z. Chen, Y.J. Li, C.Y. Zhang, H. Dong, Y.B. Cong, W.X. Zhang, L.K. Huang, T. Suo, and F. Liu, High Temperature Creep Resistance of a Thermally Stable Nanocrystalline Fe-5 at.% Zr steel, Scripta. Mater., 2020, 179, p 1–5CrossRef

17.

Z.H. Chu, F.H. Wei, X.W. Zheng, C.Y. Zhang, and Y. Yang, Microstructure and Properties of TiN/Fe-Based Amorphous Composite Coatings Fabricated by Reactive Plasma Spraying, J. Alloys. Compd., 2019, 785, p 206–213CrossRef

18.

Y.J. Qin, Y.P. Wu, J.F. Zhang, W.M. Guo, S. Hong, and L.Y. Chen, Long-term Corrosion Behavior of HVOF Sprayed FeCrSiBMn Amorphous/Nanocrystalline Coating, Trans. Nonferrous Met. Soc. China, 2015, 25, p 1144–1150CrossRef

19.

J. Su, J.J. Kang, W. Yue, G.Z. Ma, Z.Q. Fu, L.N. Zhu, D.S. She, H.D. Wang, and C.B. Wang, Comparison of Tribological Behavior of Fe-based Metallic Glass Coatings Fabricated by Cold Spraying and High Velocity Air Fuel Spraying, J. Non-Cryst. Solids, 2019, 522, p 119582CrossRef

20.

L. Xie, X. Xiong, Y. Zeng, and Y.M. Wang, The Wear Properties and Mechanism of Detonation Sprayed Iron-based Amorphous Coating, Surf. Coat. Technol., 2019, 366, p 146–155CrossRef

21.

H. Zhang, Y.T. Xie, L.P. Huang, S.S. Huang, X.B. Zheng, and G. Chen, Effect of Feedstock Particle Sizes on Wear Resistance of Plasma Sprayed Fe-based Amorphous Coatings, Surf. Coat. Technol., 2014, 258, p 495–502CrossRef

22.

H. Guo, S.D. Zhang, W.H. Sun, and J.Q. Wang, Differences in Dry Sliding Wear Behavior Between HVAF-sprayed Amorphous Steel and Crystalline Stainless Steel Coatings, J. Mater. Sci. Technol., 2019, 35, p 865–874CrossRef

23.

Y.Y. Zhou, G.Z. Ma, H.D. Wang, G.L. Li, S.Y. Chen, and B.G. Fu, Microstructures and Tribological Properties of Fe-based Amorphous Metallic Coatings Deposited via Supersonic Plasma Spraying, J. Ther. Spray Technol., 2017, 26, p 1257–1267CrossRef

24.

Y.L. An, G.L. Hou, J. Chen, X.Q. Zhao, G. Liu, H.D. Zhou, and J.M. Chen, Microstructure and Tribological Properties of Iron-Based Metallic Glass Coatings Prepared by Atmospheric Plasma Spraying, Vacuum, 2014, 107, p 132–140CrossRef

25.

G.Y. Koga, R. Schulz, S. Savoie, A.R.C. Nascimento, Y. Drolet, C. Bolfarini, C.S. Kiminami, and W.J. Botta, Microstructure and Wear Behavior of Fe-based Amorphous HVOF Coatings Produced from Commercial Precursors, Surf. Coat. Technol., 2017, 309, p 938–944CrossRef

26.

C. Zhang, L. Liu, K.C. Chan, Q. Chen, and C.Y. Tang, Wear Behavior of HVOF-sprayed Fe-based Amorphous Coatings, Intermetallics, 2012, 29, p 80–85CrossRef

27.

D.C. Zhao, T. Yamaguchi, and W.Q. Wang, Fabrication and Wear Performance of Al_0.8FeCrCoNi High Entropy Alloy Coating on Magnesium Alloy by Resistance Seam Welding, Mater. Lett., 2020, 265, p 127250CrossRef

28.

C.L. Tan, H.M. Zhou, T.C. Kuang, J. Shi, H.W. Liu, and Z.W. Liu, Laser Cladding Al-Based Amorphous-Nanocrystalline Composite Coatings on AZ80 Magnesium Alloy Under Water Cooling Condition, J. Alloys. Compd., 2017, 690, p 108–115CrossRef

29.

X.L. Ji, C.Y. Luo, Y. Sun, and J.H. Zhao, Corrosive Wear of Multi-Layer Fe-Based Coatings Laser Cladded From Amorphous Powders, Wear, 2019, 438, p 203133

30.

H. Wu, X.D. Lan, Y. Liu, F. Li, W.D. Zhang, Z.J. Chen, X.F. Zai, and H. Zeng, Fabrication, Tribological and Corrosion Behaviors of Detonation Gun Sprayed Fe-Based Metallic Glass Coating, Trans. Ferr. Met. Soc. China, 2016, 26, p 1629–1637CrossRef

31.

X.Q. Li, H.M. Zhai, W.S. Li, S. Cui, W.C. Ning, and X.L. Qiu, Dry Sliding Wear Behaviors of Fe-Based Amorphous Metallic Coating Synthesized by D-gun Spray, J. Non Cryst. Solids, 2020, 537, p 120018CrossRef

32.

Z. Zhou, L. Wang, D.Y. He, F.C. Wang, and Y.B. Liu, Microstructure and Electrochemical Behavior of Fe-Based Amorphous Metallic Coatings Fabricated by Atmospheric Plasma Spraying, J. Therm. Spray Technol., 2010, 20, p 344–350CrossRef

33.

Y. Wang, Z.Z. Xing, Q. Luo, A. Rahman, J. Jiao, S.G. Qu, Y.G. Zheng, and J. Shen, Corrosion and Erosion-Corrosion Behaviour of Activated Combustion High-Velocity Air Fuel Sprayed Fe-Based Amorphous Coatings in Chloride-containing Solutions, Corros. Sci., 2015, 98, p 339–353CrossRef

34.

Y. Wang, Y.G. Zheng, W. Ke, W.H. Hou, X.C. Chang, and J.Q. Wang, Slurry Erosion-Corrosion Behaviour of High-Velocity Oxy-Fuel (HVOF) Sprayed Fe-Based Amorphous Metallic Coatings for Marine Pump in Sand-Containing NaCl Solutions, Corros. Sci., 2011, 53, p 3177–3185CrossRef

35.

P.S. Babu, B. Basu, and G. Sundararajan, Processing-Structure-Property Correlation and Decarburization Phenomenon in Detonation Sprayed WC-12Co Coatings, Acta Mater., 2008, 56, p 5012–5026CrossRef

36.

H. Kasturi, T. Paul, S. Biswas, H. Alavi, and S.P. Harimker, Sliding Wear Behavior of Spark-Plasma-Sintered Fe-Based Amorphous Alloy Coatings on Cu-Ni Alloy, J. Mater. Eng. Perform., 2018, 27(7), p 3629–3635CrossRef

37.

Y. Liu, A. Erdemir, and E.I. Meletis, A Study of the Wear Mechanism of Diamond-Like Carbon Films, Surf. Coat. Technol., 1996, 82, p 48–56CrossRef

38.

Y. Lu, I. Baker, F.E. Kennedy, and P.R. Munroe, The Effect of Sliding Velocity on the Dry Sliding Wear of Nanophase Fe₃₀Ni₂₀Mn₂₅Al₂₅ Against Yttria-Stabilized Zirconia, Intermetallics, 2017, 83, p 17–28CrossRef

39.

G.Y. Koga, W. Wolf, R. Schulz, S. Savoie, C. Bolfarini, C.S. Kiminami, and W.J. Botta, Corrosion and Wear Properties of FeCrMnCoSi HVOF Coatings, Surf. Coat. Technol., 2019, 357, p 993–1003CrossRef

40.

S.C. Lim, M.F. Ashby, and J.H. Brunton, Wear-Rate Transitions and Their Relationship to Wear Mechanisms, Acta Metall., 1987, 356, p 1343–1348CrossRef

41.

D.D. Liang, J. Ma, Y.F. Cai, X.D. Liu, S.D. Xie, X.S. Wei, G. Xu, and J. Shen, Characterization and Elevated-Temperature Tribological Performance of AC-HVAF-Sprayed Fe-Based Amorphous Coating, Surf. Coat. Technol., 2020, 387, p 125535CrossRef

Titel: Study of Dry Sliding Wear Behavior of a Fe-Based Amorphous Coating Synthesized by Detonation Spraying on an AZ31B Magnesium Alloy
verfasst von: Huayan Yuan
Haimin Zhai
Wensheng Li
Dongqing He
Bo Cheng
Li Feng
Publikationsdatum: 05.01.2021
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 2/2021
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-05357-w

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2021

Effect of Precipitation Hardening on Corrosion Resistance of Cu-4.5 wt.%Ti

Effect of High-Energy Milling and Sintering Temperature on the Properties of Al2O3-WC-Co Composites

Effect of Heat Treatment Procedure on Mechanical Properties of Ti-15V-3Al-3Sn-3Cr Metastable β Titanium Alloy

A Comparative Study of Local Heat Treatment for Enhancing Overall Mechanical Properties of Clinched Joints

Determination of Mechanical Properties and Physical Characterization of HA-ZnO- Composites for Implant Applications

Effect of Different Cryogenic Rolling Strains on the Impact Properties of 6082 Aluminum Alloy

Premium Partner

Marktübersichten