nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.10.2015

Investigation on Rubber-Modified Polybenzoxazine Composites for Lubricating Material Applications

verfasst von: Chanchira Jubsilp, Rapiphan Taewattana, Tsutomu Takeichi, Sarawut Rimdusit

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 10/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Effects of liquid amine-terminated butadiene-acrylonitrile (ATBN) on the properties of bisphenol-A/aniline-based polybenzoxazine (PBA-a) composites were investigated. Liquid ATBN decreased gel time and lowered curing temperature of the benzoxazine resin (BA-a). The PBA-a/ATBN-based self-lubricating composites resulted in substantial enhancement regarding their tribological, mechanical, and thermal properties. The inclusion of the ATBN at 5% by weight was found decreasing the friction coefficient and improved wear resistance of the PBA-a/ATBN composites. Flexural modulus and glass transition temperature of the PBA-a composite samples added the ATBN was constant within the range of 1-5% by weight. A plausible wear mechanism of the composites is proposed based on their worn surface morphologies. Based on the findings in this work, it seems that the obtained PBA-a/ATBN self-lubricating composites would have high potential to be used for bearing materials where low friction coefficient, high wear resistance, and modulus with good thermal property are required.

Vorheriger Artikel Microstructure and Phase Transformation in Ti-22Al-(27-x)Nb-xZr Alloys During Continuous Heating

Nächster Artikel Microstructure Evolution and Abrasive Wear Behavior of Ti-6Al-4V Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

T. Singh, A. Patnaik, B.K. Satapathy, M. Kumar, and B.S. Tomar, Effect of Nanoclay Reinforcement on the Friction Braking Performance of Hybrid Phenolic Friction Composites, J. Mater. Eng. Perform., 2013, 22, p 796–805CrossRef

J. Xian and L. Xiaomei, Friction and Wear Characteristics of Polymer-Matrix Friction Materials Reinforced by Brass Fibers, J. Mater. Eng. Perform., 2004, 13, p 642–646CrossRef

J. Li and X.H. Sheng, The Effect of PA6 Content on the Mechanical and Tribological Properties of PA6 Reinforced PTFE Composites, J. Mater. Eng. Perform., 2010, 19, p 342–346CrossRef

J. Li and X.Z. Li, Evaluation of the Tribological Properties of Carbon Fiber Reinforced Poly(vinylidene fluoride) Composites, J. Mater. Eng. Perform., 2010, 19, p 1025–1030CrossRef

H. Ishida and T. Agag, Handbook of Benzoxazine Resins, Elsevier, New York, 2011

C. Jubsilp, T. Takeichi, S. Hiziroglu, and S. Rimdusit, High Performance Wood Composites Based on Benzoxazine-Epoxy Alloys, Bioresour. Technol., 2008, 99, p 8880–8886CrossRef

J. Kajohnchaiyagual, C. Jubsilp, I. Dueramae, and S. Rimdusit, Thermal and Mechanical Properties Enhancement Obtained in Highly Filled Alumina-Polybenzoxazine Composites, Polym. Compos., 2014, 35, p 2269–2279CrossRef

H. Ishida, Polybenzoxazine Nanocomposites of Clay and Method for Making Same, U.S. Patent 6,323,270, 27 Nov 2001

S. Rimdusit and H. Ishida, Development of New Class of Electronic Packaging Materials based on Ternary Systems of Benzoxazine, Epoxy, and Phenolic Resins, Polymer, 2000, 41, p 7941–7949CrossRef

10.

S. Rimdusit, C. Jubsilp, and S. Tiptipakorn, Alloys and Composites of Polybenzoxazines: Properties and Applications, Springer, Singapore, 2013CrossRef

11.

C. Jubsilp, S. Rimdusit, and T. Takeichi, Aniline-Based Polybenzoxazine and Their Copolymers or Composites: Molecular Design and Potential Applications, Aniline: Structural/Physical Properties, Reactions and Environmental Effects, K. Hernandez and M. Holloway, Ed., Nova Science Publishers Inc, New York, 2013, p 55–90

12.

S. Rimdusit, S. Pirstpindvong, W. Tanthapanichakoon, and S. Damrongsakkul, Toughening of Polybenzoxazine by Alloying with Urethane Prepolymer and Flexible Epoxy: A Comparative Study, Polym. Eng. Sci., 2005, 45, p 288–296CrossRef

13.

S. Rimdusit, P. Kunopast, and I. Dueramae, Thermomechanical Properties of Arylamine-based Benzoxazine Resins Alloyed with Epoxy Resin, Polym. Eng. Sci., 2011, 51, p 1797–1807CrossRef

14.

S. Grishchuk, S. Schmitt, O.C. Vorster, and J. Karger-Kocsis, Structure and Properties of Amine-Hardened Epoxy/Benzoxazine Hybrids: Effect of Epoxy Resin Functionality, J. Appl. Polym. Sci., 2012, 124, p 2824–2837CrossRef

15.

S. Rimdutsit and P. Bangsen, Kasemsiri, Chemorheology and Thermomechanical Characteristics of Benzoxazine-Urethane Copolymers, J. Appl. Polym. Sci., 2011, 121, p 3669–3678CrossRef

16.

C. Jubsilp, C. Panyawanitchakun, and S. Rimdusit, Flammability and Thermomechanical Properties of Dianhydride-modified Polybenzoxazine Composites Reinforced with Carbon Fiber, Polym. Compos., 2013, 34, p 2067–2075CrossRef

17.

J. Jang and D.J. Seo, Performance Improvement of Rubber-modified Polybenzoxazine, J. Appl. Polym. Sci., 1998, 67, p 1–10CrossRef

18.

S. Grishchuk, L. Sorochynska, O.C. Vorster, J. Karger-Kocsis, and J. Structure, Thermal, and Mechanical Properties of DDM-Hardened Epoxy/Benzoxazine Hybrids: Effects of Epoxy Resin Functionality and ETBN Toughening, J. Appl. Polym. Sci., 2013, 127, p 5082–5093CrossRef

19.

M. Hermandez, J. Gonzalez, M. Ichazo, D. Lovera, and C. Albano, Rheological Behavior of Modified Polypropylene (PP) with Nitrile Rubber (NBR), May 6–10, 2001 (Dallas, TX), ANTEC, 2001, p 3554–3557

20.

C. Jubsilp, T. Takeichi, and S. Rimdusit, Property Enhancement of Polybenzoxazine Modified with Dianhydride, Polym. Degrad. Stabil., 2011, 96, p 1047–1053CrossRef

21.

T. Agag and T. Takeichi, Effect of Hydroxyphenylmaleimide on the Curing Behaviour and Thermomechanical Properties of Rubber-Modified Polybenzoxazine, High Perform. Polym., 2001, 13, p S327–S342CrossRef

22.

H.H. Winter and F. Chambon, Analysis of Linear Viscoelasticity of A Crosslinking Polymer at the Gel Point, J. Rheol., 1986, 30, p 367–382CrossRef

23.

R. Thomas, D. Yumei, H. Yuelong, Y. Le, P. Moldenaers, Y. Weimin, T. Czigany, and S. Thomas, Miscibility, Morphology, Thermal, and Mechanical Properties of a DGEBA based Epoxy Resin Toughened with a Liquid Rubber, Polymer, 2008, 49, p 278–294CrossRef

24.

R. Thomas, S. Durix, C. Sinturel, T. Omonov, S. Goossens, G. Groeninckx, P. Moldenaers, and S. Thomas, Cure Kinetics, Morphology and Miscibility of Modified DGEBA-Based Epoxy Resin-Effects of a Liquid Rubber Inclusion, Polymer, 2007, 48, p 1695–1710CrossRef

25.

G. Xian, R. Walter, and F. Haupert, A Synergistic Effect of Nano-Tio₂ and Graphite on the Tribological Performance of Epoxy Matrix Composites, J. Appl. Polym. Sci., 2006, 102, p 2391–2400CrossRef

26.

S. Lampman, Characterization and Failure Analysis of Plastics, Ohio, ASM International, 2003, p 259–264

27.

K.C. Ludema, Friction, Wear, Lubrication: A Textbook in Tribology, CRC Press, New York, 1996CrossRef

28.

W. Chonkaew, N. Sombatsompop, and W. Brostow, High Impact Strength and Low Wear of Epoxy Modified by A Combination of Liquid Carboxyl Terminated Poly(Butadiene-co-Acrylonitrile) Rubber and Organoclay, Eur. Polym. J., 2013, 49, p 1461–1470CrossRef

29.

W. Chonkaew and N. Sombatsompop, Mechanical and Triboligical Properties of Epoxy Modified by Liquid Carboxyl Terminated Poly(butadiene-co-acrylonitrile rubber), J. Appl. Polym. Sci., 2012, 125, p 361–369CrossRef

30.

S. Yu, H. Hu, J. Ma, and J. Yin, Tribological Properties of Epoxy/Rubber Nanocomposites, Tribol. Int., 2008, 41, p 1205–1211CrossRef

31.

Q. Wang, Q. Xue, H. Liu, W. Shen, and J. Xu, The Effect of Particle Size of Nanometer ZrO₂ on the Tribological Behaviour of PEEK, Wear, 1996, 198, p 216–219CrossRef

32.

X.S. Xing and R.K.Y. Li, Wear Behavior of Epoxy Matrix Composites Filled with Uniform Sized Sub-micron Spherical Silica Particles, Wear, 2004, 256, p 21–26CrossRef

33.

E.W. McAllister, Pipeline Rules of Thumb Handbook: A Manual of Quick, Accurate Solutions to Everyday Pipeline Engineering Problem, Elsevier, Waltham, 2009

34.

P. Gopal, L.R. Dharani, and F.D. Blun, Hybrid Phenolic Friction Composites Containing Kevlar^®Pulp Part 1. Enhancement of Friction and Wear Performance, Wear, 1996, 193, p 199–206CrossRef

35.

J. Wu and X.H. Cheng, Friction and Wear Properties of Kevlar Pulp Reinforced Epoxy Composites Under Dry Sliding Condition, Tribol. Lett., 2006, 22, p 259–263CrossRef

36.

J.P. Davim and R. Cardoso, Effect of the Reinforcement (Carbon or Glass fibres) on Friction and Wear Behaviour of the PEEK Against Steel Surface at Long Dry Sliding, Wear, 2009, 266, p 795–799CrossRef

37.

M.T. Demirci and H. Duzcukoglu, Wear Behaviors of PTFE Reinforced PA 66 Journal Bearing, The 10th International Scientific Conference UNITECH, November 19-20, 2010 (Gabrovo, Bulgaria), p 249–253

38.

P.J. Blau, Lubrication to Control Friction, New York, Marcel Dekker Inc, Friction Science and Technology, 1996, p 285–334

39.

N. Chikhi, S. Fellahi, and M. Bakar, Modification of Epoxy Resin Using Reactive Liquid (ATBN) Rubber, Eur. Polym. J., 2002, 38, p 251–264CrossRef

40.

J. Bijwe, Nidhi, N. Majumdar, and B.K. Satapathy, Influence of Modified Phenolic Resins on the Fade and Recovery Behavior of Friction Materials, Wear, 2005, 259, p 1068–1078CrossRef

41.

A. Saffar and A. Shojaei, Effect of Rubber Component on the Performance of Brake Friction Materials, Wear, 2012, 274–275, p 286–297CrossRef

Titel: Investigation on Rubber-Modified Polybenzoxazine Composites for Lubricating Material Applications
verfasst von: Chanchira Jubsilp
Rapiphan Taewattana
Tsutomu Takeichi
Sarawut Rimdusit
Publikationsdatum: 01.10.2015
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 10/2015
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-015-1660-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 10/2015

Influence of Thermomechanical Control Process on the Evolution of Austenite Grain Size in a Low-Carbon Nb-Ti-Bearing Bainitic Steel

Effects of Microstructure on the Variation of the Unloading Behavior of DP780 Steels

The Effect of Quench-Induced Residual Stresses on the Distortion of Machined Thin-Walled Parts

Fatigue Crack Growth Mechanisms for Nickel-based Superalloy Haynes 282 at 550-750 °C

The Effect of Surface Morphology on Corrosion Performance of SS 316 LVM Biomedical Devices

Effects of Al Contents on Carburization Behavior and Corrosion Resistance of TiAl Alloys

Premium Partner

Marktübersichten