nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

02.01.2020 | ORIGINAL ARTICLE

Investigations of the sound frequency effect on laser acoustic welding of stainless steel

verfasst von: A. Kh. Gilmutdinov, A. I. Gorunov, O. A. Nyukhlaev, M. Schmidt

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 7-8/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The key features of laser acoustic welding (LAW) of AISI 321 stainless steel samples are investigated in the paper. It is found that the microstructure and the quality of the welds depend strongly on the frequency of the applied acoustic waves, which were selected at sonic (15 kHz) and ultrasonic (22, 40, 80, and 100 kHz) levels. The impact on the molten alloy acoustic vibrations with a frequency of 80 kHz provides weld joints with a uniform structure without detectable pores and homogeneous chemical composition in the cross-section. This results in noticeable improvements in mechanical properties of the weld. The pronounced displacement of the metal from the melting zone and highly inhomogeneous structure of the weld observed at 15 kHz is attributed to the sonocapillary effect.

Vorheriger Artikel Influence of machining parameters on the polymer concrete milling process

Nächster Artikel Selection of optimal process parameters and assessment of its effect in micro-friction stir welding of AA6061-T6 sheets

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Kumar S, Wu CS, Padhy GK, Ding W (2017) Application of ultrasound vibrations in welding and metal processing — a review. J Manuf Process 26:295–322. https://doi.org/10.1016/j.jmapro.2017.02.027 CrossRef

Verma J, Taiwade RV (2017) Effect of welding processes and conditions on the microstructure, mechanical properties and corrosion resistance of duplex stainless steel weldments — a review. J Manuf Process 25:134–152. https://doi.org/10.1016/j.jmapro.2016.11.003 CrossRef

Akbari Mousavi SAA, Sufizadeh AR (2009) Metallurgical investigations of pulsed Nd:YAG laser welding of AISI 321 and AISI 630 stainless steels. Mater Des 30:3150–3157. https://doi.org/10.1016/j.matdes.2008.11.026 CrossRef

Li L, Xia H, Ma G, Peng G (2018) Flow dynamics during single- and dual-spot laser welding with one common keyhole of 321 stainless steel. J Mater Process Technol 255:841–852. https://doi.org/10.1016/j.jmatprotec.2018.01.041 CrossRef

Meng W, Xu Z, Ma Q, Yin X, Fang J (2019) Pulse fiber laser welding of AISI 321-AISI 405 stainless steel thick plates butt joints. J Mater Process Technol 271:214–225. https://doi.org/10.1016/j.jmatprotec.2019.04.013 CrossRef

Sayiram G, Arivazhagan N (2015) Microstructural characterization of dissimilar welds between Incoloy 800H and 321 austenitic stainless steel. Mater Charact 102:180–188. https://doi.org/10.1016/j.matchar.2015.03.006 CrossRef

Devendranath Ramkumar K, Pavan B, Chandrasekar V (2018) Development of improved microstructural traits and mechanical integrity of stabilized stainless steel joints of AISI 321. J Manuf Process 32:582–594. https://doi.org/10.1016/j.jmapro.2018.03.029 CrossRef

Sun QJ, Lin SB, Yang CL (2013) Penetration increase of AISI 304 using ultrasonic assisted tungsten inert gas welding. Sci Technol Weld Join 14(8):765–767. https://doi.org/10.1179/136217109X12505932584772 CrossRef

Cui Y, Xu CL, Han Q (2006) Effect of ultrasonic vibration on unmixed zone formation. Scr Mater 55(11):975–978. https://doi.org/10.1016/j.scriptamat.2006.08.035 CrossRef

10.

Xie W, Fan C, Yang C, Lin S (2016) Effect of acoustic field parameters on arc acoustic binding during ultrasonic wave-assisted arc welding. Ultrason Sonochem 29:476–484. https://doi.org/10.1016/j.ultsonch.2015.11.001 CrossRef

11.

Hajitabar A, Naffakh-Moosavy H (2017) Electron beam welding of difficult-to-weld austenitic stainless steel/Nb-based alloy dissimilar joints without interlayer. Vacuum 146:170–178. https://doi.org/10.1016/j.vacuum.2017.09.046 CrossRef

12.

Chen YJ, Yue TM, Guo ZN (2017) Fatigue behaviour of titanium/PET joints formed by ultrasound-aided laser welding. J Manuf Process 249:441–451. https://doi.org/10.1016/j.jmatprotec.2017.06.036 CrossRef

13.

Chen YJ, Yue TM, Guo ZN (2017) Laser joining of metals to plastics with ultrasound vibration. J Mater Process Technol 249:441–451. https://doi.org/10.1016/j.jmatprotec.2017.06.036 CrossRef

14.

Gureev DM (1999) Prospects for laser-ultrasound treatment for surface modification, welding modification, welding, and pattern cutting. J Russ Laser Res 20:28–66. https://doi.org/10.1007/BF02508792 CrossRef

15.

Tarasov SY, Vorontsov AV, Fortuna SV, Rubtsov VE, Krasnoveikin VA, Kolubaev EA (2019) Ultrasonic-assisted laser welding on AISI 321 stainless steel. Weld World 63:875–886. https://doi.org/10.1007/s40194-019-00716-1 CrossRef

16.

Hung JC, Tsai YP, Hung C (2013) Development of a new apparatus for ultrasound vibration-assisted glass hot embossing process. Precis Eng 37:222–227. https://doi.org/10.1016/j.precisioneng.2012.06.002 CrossRef

17.

Gorunov AI, NyukhlaevA OA, Gilmutdinov K (2018) Investigation of microstructure and properties of low-carbon steel during ultrasonic-assisted laser welding and cladding. Int J Adv Manuf Technol 99:2467–2479. https://doi.org/10.1007/s00170-018-2620-7 CrossRef

18.

Akbari Mousavi SAA, Feizi H, Madoliat R (2007) Investigations on the effects of ultrasound vibrations in the extrusion process. J Mater Process Technol 187:657–661. https://doi.org/10.1016/j.jmatprotec.2006.11.168 CrossRef

19.

Laugier P, Haïat G (2011) Introduction to the physics of ultrasound. Bone Quant Ultrasound:29–45. https://doi.org/10.1007/978-94-007-0017-8_2

20.

Babitsky VI, Kalashnikov AN, Meadows A, Wijesundara AAHP (2003) Ultrasoundally assisted turning of aviation materials. J Mater Process Technol 132:157–167. https://doi.org/10.1016/S0924-0136(02)00844-0 CrossRef

21.

Shen XH, Zhang J, Xing D, Zhao Y (2012) A study of surface roughness variation in ultrasound vibration-assisted milling. Int J Adv Manuf Technol 58:533–561. https://doi.org/10.1007/s00170-011-3399-y CrossRef

22.

Liao YS, Chen YC, Lin HM (2007) Feasibility study of the ultrasound vibration assisted drilling of Inconel superalloy. Int J Mach Tool Manu 47:1988–1996. https://doi.org/10.1016/j.ijmachtools.2007.02.001 CrossRef

23.

Zheng HY, Huang H (2007) Ultrasound vibration-assisted femtosecond laser machining of microholes. J Micromech Microeng 17:58–61. https://doi.org/10.1088/0960-1317/17/8/N03 CrossRef

24.

Alavi SH, Harimkar SP (2015) Melt expulsion during ultrasound vibration assisted laser surface processing of austenitic stainless steel. Ultrasounds 59:21–30. https://doi.org/10.1016/j.ultras.2015.01.013 CrossRef

25.

Abdullah A, Shabgard MR, Ivanov A, Shervanyi-Tabar MT (2009) Effect of ultrasound-assisted EDM on the surface integrity of cemented tungsten carbide (WC-Co). Int J Adv Manuf Technol 41:268–280. https://doi.org/10.1007/s00170-008-1476-7 CrossRef

26.

Ning F, Cong W (2016) Microstructures and mechanical properties of Fe-Cr stainless steel parts fabricated by ultrasonic vibration-assisted laser engineered net shaping process. Mater Lett 179:61–64. https://doi.org/10.1016/j.matlet.2016.05.055 CrossRef

27.

Zhou S, Ma G, Dongjiang W, Chai D, Lei M (2018) Ultrasonic vibration assisted laser welding of nickel-based alloy and austenite stainless steel. J Manuf Process 31:759–767. https://doi.org/10.1016/j.jmapro.2017.12.023 CrossRef

28.

Ma G, Yan S, Wu D, Miao Q, Liu M, Niu F (2017) Microstructure evolution and mechanical properties of ultrasonic assisted laser clad yttria stabilized zirconia coating. Ceram Int 43:9622–9629. https://doi.org/10.1016/j.ceramint.2017.04.103 CrossRef

29.

Li M, Han B, Wang Y, Song L, Guo L (2016) Investigation on laser cladding high-hardness nano-ceramic coating assisted by ultrasonic vibration processing. Optik 127:4596–4600. https://doi.org/10.1016/j.ijleo.2016.01.194 CrossRef

30.

Pat. RU 2618287 Gilmutdinov A. Kh., Gorunov A. I. A method for laser product treatment (variants) and device for its implementation (variants), Application submission date: 04.08.2015, Published in bulletin No. 13, 05.03.2017

31.

Pat. RU 165178 Gilmutdinov A. Kh., Gorunov A. I. Device for casting of products from metals from metals and alloys, Application submission date: 04.07.2015, Published in bulletin No. 28: 10.10.2016

32.

Rosenberg D (2012) Physics and technology of powerful ultrasound. Powerful ultrasonic fields 2:268

33.

Eskin DG, Mi J (2018) Solidification processing of metallic alloys under external fields, vol 273. Springer Series in Materials Science, pp 1–17. https://doi.org/10.1007/978-3-319-94842-3

34.

Eskin DG, Mi J (2018) Solidification processing of metallic alloys under external fields, vol 320. Springer Series in Materials Science. https://doi.org/10.1007/978-3-319-94842-3

35.

Tiamiyu AA, Eduok U, Odeshi AG, Szpunar JA (2019) Effect of prior plastic deformation and deformation rate on the corrosion resistance of AISI 321 austenitic stainless steel. Mater Sci Eng A 745:1–9. https://doi.org/10.1016/j.msea.2018.12.093 CrossRef

36.

Ghazani MS, Eghbali B (2018) Characterization of the hot deformation microstructure of AISI 321 austenitic stainless steel. Mater Sci Eng A 730:380–390. https://doi.org/10.1016/j.msea.2018.06.025 CrossRef

37.

Tzanakis I, Xu WW, Eskin DG, Lee PD, Kotsovinos N (2015) In situ observation and analysis of ultrasonic capillary effect in molten aluminium. Ultrason Sonochem 27:72–80CrossRef

38.

(2017) Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound. Acta Mater 144:505–515

39.

Eskin DG, Tzanakis I, Wang F, Lebon GSB, Subroto T, Pericleous K, Mi J (2019) Fundamental studies of ultrasonic melt processing. Ultrason Sonochem 52:455–467CrossRef

40.

Khamidullin BA, Tsivilskiy IV, Gorunov AI, Gilmutdinov AK (2019) Modeling of the effect of powder parameters on laser cladding using coaxial nozzle. Surf Coat Technol 364(25):430–443CrossRef

Titel: Investigations of the sound frequency effect on laser acoustic welding of stainless steel
verfasst von: A. Kh. Gilmutdinov
A. I. Gorunov
O. A. Nyukhlaev
M. Schmidt
Publikationsdatum: 02.01.2020
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 7-8/2020
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-019-04825-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7-8/2020

Optimization of garment sizing and cutting order planning in the context of mass customization

The effect of Ta additions on the oxidation resistance of SPS-produced TiAl alloys

Investigation on the formation mechanism and controlling method of machined surface topography of ultra-precision flycutting machining

Prediction of mesoscale deformation in milling micro thin wall based on cantilever boundary

Robust design of processes and products using the mathematics of the stochastic frontier (SF)

Study on process parameters of fabrication fine diameter electroplated diamond wire for slicing crystalline silicon solar cell

Premium Partner

Marktübersichten